| commit | 4395c10e1643c83b75c1ff3a839bc71ad77f02c6 | [log] [tgz] |
|---|---|---|
| author | vijayank88 <paruthi143@gmail.com> | Fri Nov 25 08:12:25 2022 +0000 |
| committer | vijayank88 <paruthi143@gmail.com> | Fri Nov 25 08:12:25 2022 +0000 |
| tree | 8a409d948c136e9560a37789f9c56bcd571beb75 | |
| parent | 8228c12434afc3b246a31a84b5fcc13e60beefa9 [diff] |
mpw7 resubmit Signed-off-by: vijayank88 <paruthi143@gmail.com>
| :exclamation: Important Note |
|---|
The openGFX430 is a synthesizable Graphic controller written in Verilog and tailored for the openMSP430 core.
The openMSP430 is a synthesizable 16bit microcontroller core written in Verilog. It is compatible with Texas Instruments' MSP430 microcontroller family and can execute the code generated by any MSP430 toolchain in a near cycle accurate way.
The core comes with some peripherals (16x16 Hardware Multiplier, Watchdog, GPIO, TimerA, generic templates), with a DMA interface, and most notably with a two-wire Serial Debug Interface supporting the MSPGCC GNU Debugger (GDB) for in-system software debugging.
While being fully FPGA friendly, this design is also particularly suited for ASIC implementations (typically mixed signal ICs with strong area and low-power requirements). In a nutshell, the openMSP430 brings with it:
Support following graphic modes:
