Merge branch 'main' of github.com:AmoghLonkar/openram_testchip into main
diff --git a/openlane/openram_testchip/config.tcl b/openlane/openram_testchip/config.tcl
deleted file mode 100644
index 4533576..0000000
--- a/openlane/openram_testchip/config.tcl
+++ /dev/null
@@ -1,40 +0,0 @@
-set script_dir [file dirname [file normalize [info script]]]
-
-set ::env(DESIGN_NAME) openram_testchip
-
-set ::env(DESIGN_IS_CORE) 0
-set ::env(FP_PDN_CORE_RING) 0
-set ::env(GLB_RT_MAXLAYER) 5
-
-set ::env(VERILOG_FILES) "$script_dir/../../verilog/rtl/openram_defines.v \
- $script_dir/../../verilog/rtl/clock_mux.v \
- $script_dir/../../verilog/rtl/openram_testchip.v"
-set ::env(BASE_SDC_FILE) "$script_dir/openram_testchip.sdc"
-
-set ::env(CLOCK_PORT) "clkmux.clk"
-set ::env(CLOCK_NET) "clkmux.clk"
-set ::env(RESET_PORT) "resetn"
-
-#set ::env(CLOCK_NET) ""
-set ::env(CLOCK_PERIOD) "20"
-set ::env(IO_PCT) 0.1
-
-set ::env(FP_SIZING) absolute
-set ::env(DIE_AREA) "0 0 400 2200"
-set ::env(DESIGN_IS_CORE) 0
-
-set ::env(VDD_NETS) [list {vccd1}]
-set ::env(GND_NETS) [list {vssd1}]
-
-set ::env(FP_PIN_ORDER_CFG) $script_dir/pin_order.cfg
-
-#set ::env(SYNTH_NO_FLAT) 1
-set ::env(GLB_RT_ADJUSTMENT) 0.20
-set ::env(RUN_KLAYOUT_DRC) 0
-set ::env(PL_TARGET_DENSITY) 0.25
-
-# This doesn't check for supply connectivity:
-set ::env(FP_PDN_CHECK_NODES) 0
-
-# If you're going to use multiple power domains, then keep this disabled.
-set ::env(RUN_CVC) 0
diff --git a/openlane/openram_testchip/openram_testchip.sdc b/openlane/openram_testchip/openram_testchip.sdc
deleted file mode 100644
index c96b83b..0000000
--- a/openlane/openram_testchip/openram_testchip.sdc
+++ /dev/null
@@ -1,25 +0,0 @@
-create_clock [get_ports $::env(CLOCK_PORT)] -name $::env(CLOCK_PORT) -period $::env(CLOCK_PERIOD)
-set input_delay_value [expr $::env(CLOCK_PERIOD) * $::env(IO_PCT)]
-set output_delay_value [expr $::env(CLOCK_PERIOD) * $::env(IO_PCT)]
-puts "\[INFO\]: Setting output delay to: $output_delay_value"
-puts "\[INFO\]: Setting input delay to: $input_delay_value"
-
-set_max_fanout $::env(SYNTH_MAX_FANOUT) [current_design]
-
-set clk_indx [lsearch [all_inputs] [get_port $::env(CLOCK_PORT)]]
-set rst_indx [lsearch [all_inputs] [get_port $::env(RESET_PORT)]]
-set all_inputs_wo_clk [lreplace [all_inputs] $clk_indx $clk_indx]
-set all_inputs_wo_clk_rst [lreplace $all_inputs_wo_clk $rst_indx $rst_indx]
-#set all_inputs_wo_clk_rst $all_inputs_wo_clk
-
-
-# correct resetn
-set_input_delay $input_delay_value -clock [get_clocks $::env(CLOCK_PORT)] $all_inputs_wo_clk_rst
-set_input_delay 0.0 -clock [get_clocks $::env(CLOCK_PORT)] [get_port $::env(RESET_PORT)]
-set_output_delay $output_delay_value -clock [get_clocks $::env(CLOCK_PORT)] [all_outputs]
-
-# TODO set this as parameter
-set_driving_cell -lib_cell $::env(SYNTH_DRIVING_CELL) -pin $::env(SYNTH_DRIVING_CELL_PIN) [all_inputs]
-set cap_load [expr $::env(SYNTH_CAP_LOAD) / 1000.0]
-puts "\[INFO\]: Setting load to: $cap_load"
-set_load $cap_load [all_outputs]
diff --git a/openlane/openram_testchip/pin_order.cfg b/openlane/openram_testchip/pin_order.cfg
deleted file mode 100644
index 9402f88..0000000
--- a/openlane/openram_testchip/pin_order.cfg
+++ /dev/null
@@ -1,30 +0,0 @@
-#BUS_SORT
-#NR
-in_select
-gpio.*
-
-#S
-reset.*
-la_.*
-
-#E
-sram0_data[0-1]
-sram1_data[0-1]
-sram2_data[0-1]
-sram3_data[0-1]
-right_data[0-1]
-sram4_data[0-1]
-sram5_data[0-1]
-sram6_data[0-1]
-sram7_data[0-1]
-
-#WR
-sram8_data[0-1]
-sram9_data[0-1]
-sram10_data[0-1]
-sram11_data[0-1]
-left_data[0-1]
-sram12_data[0-1]
-sram13_data[0-1]
-sram14_data[0-1]
-sram15_data[0-1]
\ No newline at end of file
diff --git a/openlane/user_project_wrapper/config.tcl b/openlane/user_project_wrapper/config.tcl
index e326646..4e78d51 100755
--- a/openlane/user_project_wrapper/config.tcl
+++ b/openlane/user_project_wrapper/config.tcl
@@ -75,7 +75,7 @@
$script_dir/../../gds/sky130_sram_4kbyte_1rw1r_32x1024_8.gds \
$script_dir/../../gds/sky130_sram_8kbyte_1rw1r_32x2048_8.gds \
$script_dir/../../gds/sram_1rw0r0w_32_1024_sky130.gds \
-p $script_dir/../../gds/sram_1rw0r0w_32_256_sky130.gds \
+ $script_dir/../../gds/sram_1rw0r0w_32_256_sky130.gds \
$script_dir/../../gds/sram_1rw0r0w_32_512_sky130.gds \
$script_dir/../../gds/sram_1rw0r0w_64_512_sky130.gds"
# $script_dir/../../gds/openram_testchip.gds
