blob: 56d0de3104f6aa700a2fb69c83881eca48e1f660 [file] [log] [blame]
# SPDX-FileCopyrightText: 2020 Efabless Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# SPDX-License-Identifier: Apache-2.0
# Base Configurations. Don't Touch
# section begin
# YOU ARE NOT ALLOWED TO CHANGE ANY VARIABLES DEFINED IN THE FIXED WRAPPER CFGS
source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper_empty/fixed_wrapper_cfgs.tcl
# YOU CAN CHANGE ANY VARIABLES DEFINED IN THE DEFAULT WRAPPER CFGS BY OVERRIDING THEM IN THIS CONFIG.TCL
source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper_empty/default_wrapper_cfgs.tcl
set script_dir [file dirname [file normalize [info script]]]
set ::env(DESIGN_NAME) user_project_wrapper
#section end
# User Configurations
#
set ::env(DESIGN_IS_CORE) 1
set ::env(FP_PDN_CORE_RING) 1
## Source Verilog Files
set ::env(VERILOG_FILES) "\
$::env(CARAVEL_ROOT)/verilog/rtl/defines.v \
$script_dir/../../verilog/rtl/user_project_wrapper.v"
set ::env(SYNTH_DEFINES) [list SYNTHESIS ]
## Clock configurations
set ::env(CLOCK_PORT) "wb_clk_i user_clock2"
set ::env(CLOCK_NET) "wb_clk_i user_clock2"
set ::env(CLOCK_PERIOD) "10"
## Internal Macros
### Macro Placement
set ::env(FP_SIZING) "absolute"
set ::env(MACRO_PLACEMENT_CFG) $script_dir/macro.cfg
set ::env(PDN_CFG) $script_dir/pdn.tcl
### Black-box verilog and views
set ::env(VERILOG_FILES_BLACKBOX) "\
$::env(CARAVEL_ROOT)/verilog/rtl/defines.v \
$script_dir/../../verilog/rtl/sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v \
$script_dir/../../verilog/rtl/sram_macros/sky130_sram_1kbyte_1rw1r_32x256_8.v \
$script_dir/../../verilog/gl/wb_interconnect.v \
$script_dir/../../verilog/gl/wb_host.v \
$script_dir/../../verilog/gl/glbl_cfg.v\
$script_dir/../../verilog/gl/mbist1.v\
$script_dir/../../verilog/gl/mbist2.v\
"
set ::env(EXTRA_LEFS) "\
$script_dir/../../lef/sky130_sram_2kbyte_1rw1r_32x512_8.lef \
$script_dir/../../lef/sky130_sram_1kbyte_1rw1r_32x256_8.lef \
$script_dir/../../lef/glbl_cfg.lef \
$script_dir/../../lef/mbist1.lef \
$script_dir/../../lef/mbist2.lef \
$script_dir/../../lef/wb_interconnect.lef \
$script_dir/../../lef/wb_host.lef"
set ::env(EXTRA_GDS_FILES) "\
$script_dir/../../gds/sky130_sram_2kbyte_1rw1r_32x512_8.gds \
$script_dir/../../gds/sky130_sram_1kbyte_1rw1r_32x256_8.gds \
$script_dir/../../gds/glbl_cfg.gds \
$script_dir/../../gds/mbist1.gds \
$script_dir/../../gds/mbist2.gds \
$script_dir/../../gds/wb_interconnect.gds \
$script_dir/../../gds/wb_host.gds"
set ::env(SDC_FILE) "$script_dir/base.sdc"
set ::env(BASE_SDC_FILE) "$script_dir/base.sdc"
set ::env(GLB_RT_MAXLAYER) 5
# disable pdn check nodes becuase it hangs with multiple power domains.
# any issue with pdn connections will be flagged with LVS so it is not a critical check.
set ::env(FP_PDN_CHECK_NODES) 0
## Internal Macros
### Macro PDN Connections
#set ::env(FP_PDN_ENABLE_MACROS_GRID) "0"
#set ::env(FP_PDN_ENABLE_GLOBAL_CONNECTIONS) "1"
set ::env(VDD_NETS) "vccd1 vccd2 vdda1 vdda2"
set ::env(GND_NETS) "vssd1 vssd2 vssa1 vssa2"
# Add Blockage arond the SRAM to avoid Magic DRC &
# add signal routing blockage for met5
set ::env(GLB_RT_OBS) "li1 300.00 1500.00 983.10 1916.54, \
met1 300.00 1500.00 983.10 1916.54, \
met2 300.00 1500.00 983.10 1916.54, \
met3 300.00 1500.00 983.10 1916.54, \
met5 0 0 2920 3520"
set ::env(FP_PDN_MACRO_HOOKS) "\
u_wb_host vccd1 vssd1 \
u_intercon vccd1 vssd1 \
u_glbl vccd1 vssd1 \
u_mbist1 vccd1 vssd1 \
u_mbist2 vccd1 vssd1 \
u_mbist3 vccd1 vssd1 \
u_mbist4 vccd1 vssd1 \
u_sram1_2kb vccd1 vssd1 \
u_sram2_2kb vccd1 vssd1 \
u_sram3_1kb vccd1 vssd1 \
u_sram4_1kb vccd1 vssd1 \
"
# The following is because there are no std cells in the example wrapper project.
set ::env(SYNTH_TOP_LEVEL) 1
set ::env(PL_RANDOM_GLB_PLACEMENT) 1
set ::env(PL_RESIZER_DESIGN_OPTIMIZATIONS) 0
set ::env(PL_RESIZER_TIMING_OPTIMIZATIONS) 0
set ::env(PL_RESIZER_BUFFER_INPUT_PORTS) 0
set ::env(PL_RESIZER_BUFFER_OUTPUT_PORTS) 0
set ::env(FP_PDN_ENABLE_RAILS) 0
set ::env(DIODE_INSERTION_STRATEGY) 0
set ::env(FILL_INSERTION) 0
set ::env(TAP_DECAP_INSERTION) 0
set ::env(CLOCK_TREE_SYNTH) 0
set ::env(QUIT_ON_LVS_ERROR) "0"
set ::env(QUIT_ON_MAGIC_DRC) "0"
set ::env(QUIT_ON_NEGATIVE_WNS) "0"
set ::env(QUIT_ON_SLEW_VIOLATIONS) "0"
set ::env(QUIT_ON_TIMING_VIOLATIONS) "0"
set ::env(QUIT_ON_TR_DRC) "0"