Create Makefile
diff --git a/verilog/dv/wb_test/Makefile b/verilog/dv/wb_test/Makefile
new file mode 100644
index 0000000..ba50304
--- /dev/null
+++ b/verilog/dv/wb_test/Makefile
@@ -0,0 +1,79 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+## Caravel Pointers
+CARAVEL_ROOT ?= ../../../caravel
+CARAVEL_PATH ?= $(CARAVEL_ROOT)
+CARAVEL_FIRMWARE_PATH = $(CARAVEL_PATH)/verilog/dv/caravel
+CARAVEL_VERILOG_PATH = $(CARAVEL_PATH)/verilog
+CARAVEL_RTL_PATH = $(CARAVEL_VERILOG_PATH)/rtl
+CARAVEL_BEHAVIOURAL_MODELS = $(CARAVEL_VERILOG_PATH)/dv/caravel
+
+## User Project Pointers
+UPRJ_VERILOG_PATH ?= ../../../verilog
+UPRJ_RTL_PATH = $(UPRJ_VERILOG_PATH)/rtl
+UPRJ_BEHAVIOURAL_MODELS = ../
+
+## RISCV GCC
+GCC_PATH?=/ef/apps/bin
+GCC_PREFIX?=riscv32-unknown-elf
+PDK_PATH?=/ef/tech/SW/sky130A
+
+## Simulation mode: RTL/GL
+SIM?=RTL
+
+.SUFFIXES:
+
+PATTERN = wb_test
+
+all: ${PATTERN:=.vcd}
+
+hex: ${PATTERN:=.hex}
+
+%.vvp: %_tb.v %.hex
+ifeq ($(SIM),RTL)
+ iverilog -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
+ -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) \
+ $< -o $@
+else
+ iverilog -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
+ -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) -I $(CARAVEL_VERILOG_PATH) \
+ -I $(UPRJ_BEHAVIOURAL_MODELS) -I$(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
+ $< -o $@
+endif
+
+%.vcd: %.vvp
+ vvp $<
+
+%.elf: %.c $(CARAVEL_FIRMWARE_PATH)/sections.lds $(CARAVEL_FIRMWARE_PATH)/start.s
+ ${GCC_PATH}/${GCC_PREFIX}-gcc -I $(CARAVEL_PATH) -march=rv32imc -mabi=ilp32 -Wl,-Bstatic,-T,$(CARAVEL_FIRMWARE_PATH)/sections.lds,--strip-debug -ffreestanding -nostdlib -o $@ $(CARAVEL_FIRMWARE_PATH)/start.s $<
+ ${GCC_PATH}/${GCC_PREFIX}-objdump -D $@ > obj.dump
+
+%.hex: %.elf
+ ${GCC_PATH}/${GCC_PREFIX}-objcopy -O verilog $< $@
+ # to fix flash base address
+ sed -i 's/@10000000/@00000000/g' $@
+
+%.bin: %.elf
+ ${GCC_PATH}/${GCC_PREFIX}-objcopy -O binary $< /dev/stdout | tail -c +1048577 > $@
+
+# ---- Clean ----
+
+clean:
+ rm -f *.elf *.hex *.bin *.vvp *.vcd *.log
+
+.PHONY: clean hex all
