| # SPDX-FileCopyrightText: 2020 Efabless Corporation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| # Base Configurations. Don't Touch |
| # section begin |
| |
| set ::env(STD_CELL_LIBRARY) "sky130_fd_sc_hd" |
| |
| # YOU ARE NOT ALLOWED TO CHANGE ANY VARIABLES DEFINED IN THE FIXED WRAPPER CFGS |
| source $::env(DESIGN_DIR)/fixed_dont_change/fixed_wrapper_cfgs.tcl |
| |
| |
| # YOU CAN CHANGE ANY VARIABLES DEFINED IN THE DEFAULT WRAPPER CFGS BY OVERRIDING THEM IN THIS CONFIG.TCL |
| source $::env(DESIGN_DIR)/fixed_dont_change/default_wrapper_cfgs.tcl |
| |
| |
| set script_dir [file dirname [file normalize [info script]]] |
| set proj_dir [file dirname [file normalize [info script]]] |
| |
| set ::env(DESIGN_NAME) user_project_wrapper |
| set verilog_root $::env(DESIGN_DIR)/../../verilog/ |
| set lef_root $::env(DESIGN_DIR)/../../lef/ |
| set gds_root $::env(DESIGN_DIR)/../../gds/ |
| #section end |
| |
| # User Configurations |
| # |
| set ::env(DESIGN_IS_CORE) 1 |
| |
| |
| ## Source Verilog Files |
| set ::env(VERILOG_FILES) "\ |
| $::env(DESIGN_DIR)/../../verilog/rtl/user_project_wrapper.v" |
| |
| |
| ## Clock configurations |
| set ::env(CLOCK_PORT) "user_clock2 wb_clk_i" |
| #set ::env(CLOCK_NET) "mprj.clk" |
| |
| set ::env(CLOCK_PERIOD) "10" |
| |
| ## Internal Macros |
| ### Macro Placement |
| set ::env(MACRO_PLACEMENT_CFG) $::env(DESIGN_DIR)/macro.cfg |
| |
| set ::env(PDN_CFG) $::env(DESIGN_DIR)/pdn_cfg.tcl |
| |
| set ::env(SDC_FILE) $::env(DESIGN_DIR)/base.sdc |
| set ::env(BASE_SDC_FILE) $::env(DESIGN_DIR)/base.sdc |
| |
| set ::env(SYNTH_READ_BLACKBOX_LIB) 1 |
| |
| ### Black-box verilog and views |
| set ::env(VERILOG_FILES_BLACKBOX) "\ |
| $::env(PDK_ROOT)/$::env(PDK)/libs.ref/sky130_sram_macros/verilog/sky130_sram_2kbyte_1rw1r_32x512_8.v \ |
| $::env(PDK_ROOT)/$::env(PDK)/libs.ref/sky130_sram_macros/verilog/sky130_sram_1kbyte_1rw1r_32x256_8.v \ |
| $::env(DESIGN_DIR)/../../verilog/gl/wb_interconnect.v \ |
| $::env(DESIGN_DIR)/../../verilog/gl/wb_host.v \ |
| $::env(DESIGN_DIR)/../../verilog/gl/glbl_cfg.v\ |
| $::env(DESIGN_DIR)/../../verilog/gl/mbist_top1.v\ |
| $::env(DESIGN_DIR)/../../verilog/gl/mbist_top2.v\ |
| " |
| |
| set ::env(EXTRA_LEFS) "\ |
| $::env(PDK_ROOT)/$::env(PDK)/libs.ref/sky130_sram_macros/lef/sky130_sram_2kbyte_1rw1r_32x512_8.lef \ |
| $::env(PDK_ROOT)/$::env(PDK)/libs.ref/sky130_sram_macros/lef/sky130_sram_1kbyte_1rw1r_32x256_8.lef \ |
| $::env(DESIGN_DIR)/../../lef/glbl_cfg.lef \ |
| $::env(DESIGN_DIR)/../../lef/mbist_top1.lef \ |
| $::env(DESIGN_DIR)/../../lef/mbist_top2.lef \ |
| $::env(DESIGN_DIR)/../../lef/wb_interconnect.lef \ |
| $::env(DESIGN_DIR)/../../lef/wb_host.lef" |
| |
| set ::env(EXTRA_GDS_FILES) "\ |
| $::env(PDK_ROOT)/$::env(PDK)/libs.ref/sky130_sram_macros/gds/sky130_sram_2kbyte_1rw1r_32x512_8.gds \ |
| $::env(PDK_ROOT)/$::env(PDK)/libs.ref/sky130_sram_macros/gds/sky130_sram_1kbyte_1rw1r_32x256_8.gds \ |
| $::env(DESIGN_DIR)/../../gds/glbl_cfg.gds \ |
| $::env(DESIGN_DIR)/../../gds/mbist_top1.gds \ |
| $::env(DESIGN_DIR)/../../gds/mbist_top2.gds \ |
| $::env(DESIGN_DIR)/../../gds/wb_interconnect.gds \ |
| $::env(DESIGN_DIR)/../../gds/wb_host.gds" |
| |
| set ::env(SYNTH_DEFINES) [list SYNTHESIS ] |
| |
| #set ::env(VERILOG_INCLUDE_DIRS) [glob $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr1c/src/includes ] |
| |
| #set ::env(GLB_RT_MAXLAYER) 6 |
| set ::env(RT_MAX_LAYER) {met5} |
| |
| ## Internal Macros |
| ### Macro PDN Connections |
| set ::env(FP_PDN_CHECK_NODES) 1 |
| set ::env(FP_PDN_IRDROP) "1" |
| set ::env(RUN_IRDROP_REPORT) "1" |
| #################### |
| |
| set ::env(FP_PDN_ENABLE_MACROS_GRID) {1} |
| set ::env(FP_PDN_ENABLE_GLOBAL_CONNECTIONS) "0" |
| set ::env(FP_PDN_CHECK_NODES) 1 |
| set ::env(FP_PDN_ENABLE_RAILS) 0 |
| set ::env(FP_PDN_IRDROP) "1" |
| |
| set ::env(VDD_NETS) {vccd1 vccd2 vdda1 vdda2} |
| set ::env(GND_NETS) {vssd1 vssd2 vssa1 vssa2} |
| # |
| set ::env(VDD_NET) {vccd1} |
| set ::env(GND_NET) {vssd1} |
| set ::env(VDD_PIN) {vccd1} |
| set ::env(GND_PIN) {vssd1} |
| |
| set ::env(PDN_STRIPE) {vccd1 vssd1 } |
| set ::env(DRT_OPT_ITERS) {32} |
| |
| # Add Blockage arond the SRAM to avoid Magic DRC & |
| # add signal routing blockage for met5 |
| set ::env(GLB_RT_OBS) "met1 2000.00 800.00 2683.10 1216.54, \ |
| met2 2000.00 800.00 2683.10 1216.54, \ |
| met3 2000.00 800.00 2683.10 1216.54, \ |
| met1 2000.00 1400.00 2683.10 1816.54, \ |
| met2 2000.00 1400.00 2683.10 1816.54, \ |
| met3 2000.00 1400.00 2683.10 1816.54, \ |
| met1 2000.00 2000.00 2683.10 2416.54, \ |
| met2 2000.00 2000.00 2683.10 2416.54, \ |
| met3 2000.00 2000.00 2683.10 2416.54, \ |
| met1 2000.00 2600.00 2683.10 3016.54, \ |
| met2 2000.00 2600.00 2683.10 3016.54, \ |
| met3 2000.00 2600.00 2683.10 3016.54, \ |
| met1 200.00 1200.00 679.78 1597.5, \ |
| met2 200.00 1200.00 679.78 1597.5, \ |
| met3 200.00 1200.00 679.78 1597.5, \ |
| met1 200.00 1800.00 679.78 2197.5, \ |
| met2 200.00 1800.00 679.78 2197.5, \ |
| met3 200.00 1800.00 679.78 2197.5, \ |
| met1 200.00 2400.00 679.78 2797.5, \ |
| met2 200.00 2400.00 679.78 2797.5, \ |
| met3 200.00 2400.00 679.78 2797.5, \ |
| met1 200.00 3000.00 679.78 3397.5, \ |
| met2 200.00 3000.00 679.78 3397.5, \ |
| met3 200.00 3000.00 679.78 3397.5, \ |
| met5 0 0 2920 3520" |
| |
| |
| set ::env(FP_PDN_MACRO_HOOKS) "\ |
| u_wb_host vccd1 vssd1 vccd1 vssd1,\ |
| u_intercon vccd1 vssd1 vccd1 vssd1,\ |
| u_glbl vccd1 vssd1 vccd1 vssd1,\ |
| u_mbist1 vccd1 vssd1 vccd1 vssd1,\ |
| u_mbist2 vccd1 vssd1 vccd1 vssd1,\ |
| u_mbist3 vccd1 vssd1 vccd1 vssd1,\ |
| u_mbist4 vccd1 vssd1 vccd1 vssd1,\ |
| u_mbist5 vccd1 vssd1 vccd1 vssd1,\ |
| u_mbist6 vccd1 vssd1 vccd1 vssd1,\ |
| u_mbist7 vccd1 vssd1 vccd1 vssd1,\ |
| u_mbist8 vccd1 vssd1 vccd1 vssd1,\ |
| u_sram1_2kb vccd1 vssd1 vccd1 vssd1,\ |
| u_sram2_2kb vccd1 vssd1 vccd1 vssd1,\ |
| u_sram3_2kb vccd1 vssd1 vccd1 vssd1,\ |
| u_sram4_2kb vccd1 vssd1 vccd1 vssd1,\ |
| u_sram5_1kb vccd1 vssd1 vccd1 vssd1,\ |
| u_sram6_1kb vccd1 vssd1 vccd1 vssd1,\ |
| u_sram7_1kb vccd1 vssd1 vccd1 vssd1,\ |
| u_sram8_1kb vccd1 vssd1 vccd1 vssd1\ |
| " |
| |
| |
| # The following is because there are no std cells in the example wrapper project. |
| set ::env(SYNTH_TOP_LEVEL) 0 |
| set ::env(PL_RANDOM_GLB_PLACEMENT) 1 |
| set ::env(PL_RESIZER_DESIGN_OPTIMIZATIONS) 0 |
| set ::env(PL_RESIZER_TIMING_OPTIMIZATIONS) 0 |
| set ::env(PL_RESIZER_BUFFER_INPUT_PORTS) 0 |
| set ::env(PL_RESIZER_BUFFER_OUTPUT_PORTS) 0 |
| set ::env(GLB_RESIZER_TIMING_OPTIMIZATIONS) {0} |
| set ::env(GLB_OPTIMIZE_MIRRORING) {0} |
| set ::env(DIODE_INSERTION_STRATEGY) 0 |
| set ::env(RUN_FILL_INSERTION) 0 |
| set ::env(RUN_TAP_DECAP_INSERTION) 0 |
| set ::env(CLOCK_TREE_SYNTH) 0 |
| set ::env(QUIT_ON_LVS_ERROR) "1" |
| set ::env(QUIT_ON_MAGIC_DRC) "0" |
| set ::env(QUIT_ON_NEGATIVE_WNS) "0" |
| set ::env(QUIT_ON_SLEW_VIOLATIONS) "0" |
| set ::env(QUIT_ON_TIMING_VIOLATIONS) "0" |
| |
| ## Temp Masked due to long Run Time |
| set ::env(RUN_KLAYOUT_XOR) {0} |
| |