| set ::env(PDK) "sky130A" |
| set ::env(STD_CELL_LIBRARY) "sky130_fd_sc_hd" |
| |
| set script_dir [file dirname [file normalize [info script]]] |
| |
| set ::env(ROUTING_CORES) "8" |
| |
| set ::env(DESIGN_NAME) WBPeripheralBusInterface |
| |
| set ::env(VERILOG_FILES) "\ |
| $::env(CARAVEL_ROOT)/verilog/rtl/defines.v \ |
| $script_dir/../../verilog/rtl/Peripherals/WBPeripheralBusInterface/WBPeripheralBusInterface_top.v \ |
| $script_dir/../../verilog/rtl/Utility/WBSlaveSelect.v" |
| |
| set ::env(DESIGN_IS_CORE) 0 |
| set ::env(FP_PDN_CORE_RING) 0 |
| |
| set ::env(CLOCK_PORT) "wb_clk_i" |
| set ::env(CLOCK_PERIOD) "10" |
| |
| # Absolute module size |
| # Modules should be bigger than 200x200 |
| # Also generally best to leave bottom left as 0,0 |
| set ::env(FP_SIZING) "absolute" |
| set ::env(DIE_AREA) "0 0 200 200" |
| |
| # Alternatively use an adaptive size |
| #set ::env(FP_SIZING) "relative" |
| #set ::env(FP_CORE_UTIL) 20 |
| #set ::env(FP_ASPECT_RATIO) 1.0 |
| |
| set ::env(FP_PIN_ORDER_CFG) $script_dir/pin_order.cfg |
| |
| set ::env(PL_BASIC_PLACEMENT) 0 |
| set ::env(PL_TARGET_DENSITY) 0.08 |
| |
| # If this cell is placed in the top level (user_project_wrapper), then it can't have anything on metal layer 5 as this is used for PDN |
| # If this cell is placed in another macro, then we can't have anything on metal layer 4 as the parent macro will add the PDN (Possibly) |
| set ::env(RT_MAX_LAYER) {met3} |
| |
| # You can draw more power domains if you need to |
| set ::env(VDD_NETS) [list {vccd1}] |
| set ::env(GND_NETS) [list {vssd1}] |
| |
| # If you're going to use multiple power domains, then disable cvc run. |
| set ::env(RUN_CVC) 1 |
| |
| set ::env(DIODE_INSERTION_STRATEGY) 4 |
