blob: caed827853aabf52e06b4763769fda47f27db09c [file] [log] [blame]
//////////////////////////////////////////////////////////////////////////////
// SPDX-FileCopyrightText: 2021 , Dinesh Annayya
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// SPDX-License-Identifier: Apache-2.0
// SPDX-FileContributor: Created by Dinesh Annayya <dinesha@opencores.org>
//
//////////////////////////////////////////////////////////////////////
//// ////
//// Pinmux ////
//// ////
//// This file is part of the riscduino cores project ////
//// https://github.com/dineshannayya/riscduino.git ////
//// ////
//// Description ////
//// Manages all the pin multiplexing ////
//// ////
//// To Do: ////
//// nothing ////
//// ////
//// Author(s): ////
//// - Dinesh Annayya, dinesha@opencores.org ////
//// ////
//// Revision : ////
//// 0.1 - 16th Aug 2022, Dinesh A ////
//// Seperated the pinmux from pinmux_top module ////
//// 0.2 - 21th Aug 2022, Dinesh A ////
//// uart_master disable option added ////
//////////////////////////////////////////////////////////////////////
/************************************************
* Pin Mapping Arduino ATMGE CONFIG
* ATMEGA328 Port caravel Pin Mapping
* Pin-1 22 PC6/WS[0]/RESET* digital_io[0]
* Pin-2 0 PD0/WS[0]/RXD[0] digital_io[1]
* Pin-3 1 PD1/WS[0]/TXD[0] digital_io[2]
* Pin-4 2 PD2/WS[0]/RXD[1]/INT0 digital_io[3]
* Pin-5 3 PD3/WS[1]INT1/OC2B(PWM0) digital_io[4]
* Pin-6 4 PD4/WS[1]TXD[1] digital_io[5]
* Pin-7 VCC -
* Pin-8 GND -
* Pin-9 20 PB6/WS[1]/XTAL1/TOSC1 digital_io[6]
* Pin-10 21 PB7/WS[1]/XTAL2/TOSC2 digital_io[7]
* Pin-11 5 PD5/WS[2]/SS[3]/OC0B(PWM1)/T1 digital_io[8]
* Pin-12 6 PD6/WS[2]/SS[2]/OC0A(PWM2)/AIN0 digital_io[9]/analog_io[2]
* Pin-13 7 PD7/WS[2]/A1N1 digital_io[10]/analog_io[3]
* Pin-14 8 PB0/WS[2]/CLKO/ICP1 digital_io[11]
* Pin-15 9 PB1/WS[3]/SS[1]OC1A(PWM3) digital_io[12]
* Pin-16 10 PB2/WS[3]/SS[0]/OC1B(PWM4) digital_io[13]
* Pin-17 11 PB3/WS[3]/MOSI/OC2A(PWM5) digital_io[14]
* Pin-18 12 PB4/WS[3]/MISO digital_io[15]
* Pin-19 13 PB5/SCK digital_io[16]
* Pin-20 AVCC -
* Pin-21 AREF analog_io[10]
* Pin-22 GND -
* Pin-23 14 PC0/ADC0 digital_io[18]/analog_io[11]
* Pin-24 15 PC1/ADC1 digital_io[19]/analog_io[12]
* Pin-25 16 PC2/ADC2 digital_io[20]/analog_io[13]
* Pin-26 17 PC3/ADC3 digital_io[21]/analog_io[14]
* Pin-27 18 PC4/ADC4/SDA digital_io[22]/analog_io[15]
* Pin-28 19 PC5/ADC5/SCL digital_io[23]/analog_io[16]
*
* Additional Pad used for Externam ROM/RAM
* sflash_sck digital_io[24]
* sflash_ss[0] digital_io[25]
* sflash_ss[1] digital_io[26]
* sflash_ss[2] digital_io[27]
* sflash_ss[3] digital_io[28]
* sflash_io0 digital_io[29]
* sflash_io1 digital_io[30]
* sflash_io2 digital_io[31]
* sflash_io3 digital_io[32]
* dbg_clk_mon digital_io[33]
* uartm_rxd digital_io[34]
* uartm_txd digital_io[35]
* usb_dp digital_io[36]
* usb_dn digital_io[37]
****************************************************************
* Pin-1 RESET is not supported as there is no suppport for fuse config
**************/
module pinmux (
// Digital IO
output logic [37:0] digital_io_out ,
output logic [37:0] digital_io_oen ,
input logic [37:0] digital_io_in ,
// Config
input logic [31:0] cfg_gpio_out_type ,// GPIO Type, 1 - WS_281X port
input logic [31:0] cfg_gpio_dir_sel ,
input logic [31:0] cfg_multi_func_sel ,
output logic[5:0] cfg_pwm_enb ,
input logic [5:0] pwm_wfm ,
output logic [1:0] ext_intr_in , // External PAD level interrupt
output logic [31:0] pad_gpio_in , // GPIO data input from PAD
input logic [31:0] pad_gpio_out , // GPIO Data out towards PAD
// SFLASH I/F
input logic sflash_sck ,
input logic [3:0] sflash_ss ,
input logic [3:0] sflash_oen ,
input logic [3:0] sflash_do ,
output logic [3:0] sflash_di ,
// SSRAM I/F - Temp Masked
//input logic ssram_sck,
//input logic ssram_ss,
//input logic [3:0] ssram_oen,
//input logic [3:0] ssram_do,
//output logic [3:0] ssram_di,
// USB I/F
input logic usb_dp_o,
input logic usb_dn_o,
input logic usb_oen,
output logic usb_dp_i,
output logic usb_dn_i,
// UART I/F
input logic [1:0] uart_txd,
output logic [1:0] uart_rxd,
// I2CM I/F
input logic i2cm_clk_o,
output logic i2cm_clk_i,
input logic i2cm_clk_oen,
input logic i2cm_data_oen,
input logic i2cm_data_o,
output logic i2cm_data_i,
// SPI MASTER
input logic spim_sck,
input logic [3:0] spim_ssn,
input logic spim_miso,
output logic spim_mosi,
// SPI SLAVE
output logic spis_sck,
output logic spis_ssn,
input logic spis_miso,
output logic spis_mosi,
// UART MASTER I/F
output logic uartm_rxd ,
input logic uartm_txd ,
// WS_281X TXD Port
input logic [3:0] ws_txd,
input logic dbg_clk_mon
);
reg [7:0] port_a_in; // PORT A Data In
reg [7:0] port_b_in; // PORT B Data In
reg [7:0] port_c_in; // PORT C Data In
reg [7:0] port_d_in; // PORT D Data In
wire [7:0] port_a_out; // PORT A Data Out
wire [7:0] port_b_out; // PORT B Data Out
wire [7:0] port_c_out; // PORT C Data Out
wire [7:0] port_d_out; // PORT D Data Out
// GPIO to PORT Mapping
assign pad_gpio_in[7:0] = port_a_in;
assign pad_gpio_in[15:8] = port_b_in;
assign pad_gpio_in[23:16] = port_c_in;
assign pad_gpio_in[31:24] = port_d_in;
assign port_a_out = pad_gpio_out[7:0];
assign port_b_out = pad_gpio_out[15:8];
assign port_c_out = pad_gpio_out[23:16];
assign port_d_out = pad_gpio_out[31:24];
assign cfg_pwm_enb = cfg_multi_func_sel[5:0];
wire [1:0] cfg_int_enb = cfg_multi_func_sel[7:6];
wire [1:0] cfg_uart_enb = cfg_multi_func_sel[9:8];
wire cfg_spim_enb = cfg_multi_func_sel[10];
wire [3:0] cfg_spim_cs_enb = cfg_multi_func_sel[14:11];
wire cfg_i2cm_enb = cfg_multi_func_sel[15];
wire cfg_muart_dis = cfg_multi_func_sel[31:8]; // 0 - uart master enable, 1 - disable
wire [7:0] cfg_port_a_dir_sel = cfg_gpio_dir_sel[7:0];
wire [7:0] cfg_port_b_dir_sel = cfg_gpio_dir_sel[15:8];
wire [7:0] cfg_port_c_dir_sel = cfg_gpio_dir_sel[23:16];
wire [7:0] cfg_port_d_dir_sel = cfg_gpio_dir_sel[31:24];
wire [7:0] cfg_port_a_port_type = cfg_gpio_out_type[7:0];
wire [7:0] cfg_port_b_port_type = cfg_gpio_out_type[15:8];
wire [7:0] cfg_port_c_port_type = cfg_gpio_out_type[23:16];
wire [7:0] cfg_port_d_port_type = cfg_gpio_out_type[31:24];
// This logic to create spi slave interface
logic pin_resetn,spis_boot;
// On Reset internal SPI Master is disabled, If pin_reset = 0, then we are in
// SPIS Boot Mode
assign spis_boot = (cfg_spim_enb ) ? 1'b0: !pin_resetn;
assign spis_ssn = (spis_boot ) ? pin_resetn : 1'b1;
// datain selection
always_comb begin
port_a_in = 'h0;
port_b_in = 'h0;
port_c_in = 'h0;
port_d_in = 'h0;
uart_rxd = 'h0;
ext_intr_in= 'h0;
spim_mosi = 'h0;
i2cm_data_i= 'h0;
i2cm_clk_i = 'h0;
//Pin-1 PC6/RESET* digital_io[0]
port_c_in[6] = digital_io_in[0];
pin_resetn = digital_io_in[0];
//Pin-2 PD0/RXD[0] digital_io[1]
port_d_in[0] = digital_io_in[1];
if(cfg_uart_enb[0]) uart_rxd[0] = digital_io_in[1];
//Pin-3 PD1/TXD[0] digital_io[2]
port_d_in[1] = digital_io_in[2];
//Pin-4 PD2/RXD[1]/INT0 digital_io[3]
port_d_in[2] = digital_io_in[3];
if(cfg_uart_enb[1]) uart_rxd[1] = digital_io_in[3];
else if(cfg_int_enb[0]) ext_intr_in[0] = digital_io_in[3];
//Pin-5 PD3/INT1/OC2B(PWM0) digital_io[4]
port_d_in[3] = digital_io_in[4];
if(cfg_int_enb[1]) ext_intr_in[1] = digital_io_in[4];
//Pin-6 PD4/TXD[1] digital_io[5]
port_d_in[4] = digital_io_in[5];
//Pin-9 PB6/XTAL1/TOSC1 digital_io[6]
port_b_in[6] = digital_io_in[6];
// Pin-10 PB7/XTAL2/TOSC2 digital_io[7]
port_b_in[7] = digital_io_in[7];
//Pin-11 PD5/OC0B(PWM1)/T1 digital_io[8]
port_d_in[5] = digital_io_in[8];
//Pin-12 PD6/OC0A(PWM2)/AIN0 digital_io[9] /analog_io[2]
port_d_in[6] = digital_io_in[9];
//Pin-13 PD7/A1N1 digital_io[10]/analog_io[3]
port_d_in[7] = digital_io_in[10];
//Pin-14 PB0/CLKO/ICP1 digital_io[11]
port_b_in[0] = digital_io_in[11];
//Pin-15 PB1/OC1A(PWM3) digital_io[12]
port_b_in[1] = digital_io_in[12];
//Pin-16 PB2/SS/OC1B(PWM4) digital_io[13]
port_b_in[2] = digital_io_in[13];
//Pin-17 PB3/MOSI/OC2A(PWM5) digital_io[14]
port_b_in[3] = digital_io_in[14];
if(cfg_spim_enb) spim_mosi = digital_io_in[14]; // SPIM MOSI (Input) = SPIS MISO (Output)
//Pin-18 PB4/MISO digital_io[15]
port_b_in[4] = digital_io_in[15];
spis_mosi = (spis_boot) ? digital_io_in[15] : 1'b0; // SPIM MISO (Output) = SPIS MOSI (Input)
//Pin-19 PB5/SCK digital_io[16]
port_b_in[5]= digital_io_in[16];
spis_sck = (spis_boot) ? digital_io_in[16] : 1'b1; // SPIM SCK (Output) = SPIS SCK (Input)
//Pin-23 PC0/ADC0 digital_io[18]/analog_io[11]
port_c_in[0] = digital_io_in[18];
//Pin-24 PC1/ADC1 digital_io[19]/analog_io[12]
port_c_in[1] = digital_io_in[19];
//Pin-25 PC2/ADC2 digital_io[20]/analog_io[13]
port_c_in[2] = digital_io_in[20];
//Pin-26 PC3/ADC3 digital_io[21]/analog_io[14]
port_c_in[3] = digital_io_in[21];
//Pin-27 PC4/ADC4/SDA digital_io[22]/analog_io[15]
port_c_in[4] = digital_io_in[22];
if(cfg_i2cm_enb) i2cm_data_i = digital_io_in[22];
//Pin-28 PC5/ADC5/SCL digital_io[23]/analog_io[16]
port_c_in[5] = digital_io_in[23];
if(cfg_i2cm_enb) i2cm_clk_i = digital_io_in[23];
sflash_di[0] = digital_io_in[29];
sflash_di[1] = digital_io_in[30];
sflash_di[2] = digital_io_in[31];
sflash_di[3] = digital_io_in[32];
// UAR MASTER I/F
uartm_rxd = (cfg_muart_dis) ? 1'b0 : digital_io_in[34];
usb_dp_i = digital_io_in[36];
usb_dn_i = digital_io_in[37];
end
// dataout selection
always_comb begin
digital_io_out = 'h0;
//Pin-1 PC6/WS[0]/RESET* digital_io[0]
if(cfg_port_c_port_type[6]) digital_io_out[0] = ws_txd[0];
else if(cfg_port_c_dir_sel[6]) digital_io_out[0] = port_c_out[6];
//Pin-2 PD0/WS[0]/RXD[0] digital_io[1]
if(cfg_port_d_port_type[0]) digital_io_out[1] = ws_txd[0];
else if(cfg_port_d_dir_sel[0]) digital_io_out[1] = port_d_out[0];
//Pin-3 PD1/WS[0]/TXD[0] digital_io[2]
if (cfg_uart_enb[0]) digital_io_out[2] = uart_txd[0];
else if(cfg_port_d_port_type[1]) digital_io_out[2] = ws_txd[0];
else if(cfg_port_d_dir_sel[1]) digital_io_out[2] = port_d_out[1];
//Pin-4 PD2/WS[0]/RXD[1]/INT0 digital_io[3]
if(cfg_port_d_port_type[2]) digital_io_out[3] = ws_txd[0];
else if(cfg_port_d_dir_sel[2]) digital_io_out[3] = port_d_out[2];
//Pin-5 PD3/WS[1]INT1/OC2B(PWM0) digital_io[4]
if(cfg_pwm_enb[0]) digital_io_out[4] = pwm_wfm[0];
else if(cfg_port_d_port_type[3])digital_io_out[4] = ws_txd[1];
else if(cfg_port_d_dir_sel[3]) digital_io_out[4] = port_d_out[3];
//Pin-6 PD4/WS[1]/TXD[1] digital_io[5]
if (cfg_uart_enb[1]) digital_io_out[5] = uart_txd[1];
else if(cfg_port_d_port_type[4]) digital_io_out[5] = ws_txd[1];
else if(cfg_port_d_dir_sel[4]) digital_io_out[5] = port_d_out[4];
//Pin-9 PB6/XTAL1/WS[1]/TOSC1 digital_io[6]
if(cfg_port_b_port_type[6]) digital_io_out[6] = ws_txd[1];
else if(cfg_port_b_dir_sel[6]) digital_io_out[6] = port_b_out[6];
// Pin-10 PB7/XTAL2/WS[1]/TOSC2 digital_io[7]
if(cfg_port_b_port_type[7]) digital_io_out[7] = ws_txd[1];
else if(cfg_port_b_dir_sel[7]) digital_io_out[7] = port_b_out[7];
//Pin-11 PD5/SS[3]/WS[2]/OC0B(PWM1)/T1 digital_io[8]
if(cfg_pwm_enb[1]) digital_io_out[8] = pwm_wfm[1];
else if(cfg_spim_cs_enb[3]) digital_io_out[8] = spim_ssn[3];
else if(cfg_port_d_port_type[5])digital_io_out[8] = ws_txd[2];
else if(cfg_port_d_dir_sel[5]) digital_io_out[8] = port_d_out[5];
//Pin-12 PD6/SS[2]/WS[2]/OC0A(PWM2)/AIN0 digital_io[9] /analog_io[2]
if(cfg_pwm_enb[2]) digital_io_out[9] = pwm_wfm[2];
else if(cfg_spim_cs_enb[2]) digital_io_out[9] = spim_ssn[2];
else if(cfg_port_d_port_type[6])digital_io_out[9] = ws_txd[2];
else if(cfg_port_d_dir_sel[6]) digital_io_out[9] = port_d_out[6];
//Pin-13 PD7/A1N1/WS[2] digital_io[10]/analog_io[3]
if(cfg_port_d_port_type[7]) digital_io_out[10] = ws_txd[2];
else if(cfg_port_d_dir_sel[7]) digital_io_out[10] = port_d_out[7];
//Pin-14 PB0/CLKO/WS[2]/ICP1 digital_io[11]
if(cfg_port_b_port_type[0]) digital_io_out[11] = ws_txd[2];
else if(cfg_port_b_dir_sel[0]) digital_io_out[11] = port_b_out[0];
//Pin-15 PB1/SS[1]/WS[3]/OC1A(PWM3) digital_io[12]
if(cfg_pwm_enb[3]) digital_io_out[12] = pwm_wfm[3];
else if(cfg_spim_cs_enb[1]) digital_io_out[12] = spim_ssn[1];
else if(cfg_port_b_port_type[1])digital_io_out[12] = ws_txd[3];
else if(cfg_port_b_dir_sel[1]) digital_io_out[12] = port_b_out[1];
//Pin-16 PB2/SS[0]/WS[3]/OC1B(PWM4) digital_io[13]
if(cfg_pwm_enb[4]) digital_io_out[13] = pwm_wfm[4];
else if(cfg_spim_cs_enb[0]) digital_io_out[13] = spim_ssn[0];
else if(cfg_port_b_port_type[2])digital_io_out[13] = ws_txd[3];
else if(cfg_port_b_dir_sel[2]) digital_io_out[13] = port_b_out[2];
//Pin-17 PB3/MOSI/WS[3]/OC2A(PWM5) digital_io[14]
if(cfg_pwm_enb[5]) digital_io_out[14] = pwm_wfm[5];
else if(cfg_port_b_port_type[3]) digital_io_out[14] = ws_txd[3];
else if(cfg_port_b_dir_sel[3]) digital_io_out[14] = port_b_out[3];
else if(spis_boot) digital_io_out[14] = spis_miso; // SPIM MOSI (Input) = SPIS MISO (Output)
//Pin-18 PB4/WS[3]/MISO digital_io[15]
if(cfg_spim_enb) digital_io_out[15] = spim_miso; // SPIM MISO (Output) = SPIS MOSI (Input)
else if(cfg_port_b_port_type[4])digital_io_out[15] = ws_txd[3];
else if(cfg_port_b_dir_sel[4]) digital_io_out[15] = port_b_out[4];
//Pin-19 PB5/SCK digital_io[16]
if(cfg_spim_enb) digital_io_out[16] = spim_sck; // SPIM SCK (Output) = SPIS SCK (Input)
else if(cfg_port_b_dir_sel[5]) digital_io_out[16] = port_b_out[5];
//Pin-23 PC0/ADC0 digital_io[18]/analog_io[11]
if(cfg_port_c_dir_sel[0]) digital_io_out[18] = port_c_out[0];
//Pin-24 PC1/ADC1 digital_io[19]/analog_io[12]
if(cfg_port_c_dir_sel[1]) digital_io_out[19] = port_c_out[1];
//Pin-25 PC2/ADC2 digital_io[20]/analog_io[13]
if(cfg_port_c_dir_sel[2]) digital_io_out[20] = port_c_out[2];
//Pin-26 PC3/ADC3 digital_io[21]/analog_io[14]
if(cfg_port_c_dir_sel[3]) digital_io_out[21] = port_c_out[3];
//Pin-27 PC4/ADC4/SDA digital_io[22]/analog_io[15]
if(cfg_i2cm_enb) digital_io_out[22] = i2cm_data_o;
else if(cfg_port_c_dir_sel[4]) digital_io_out[22] = port_c_out[4];
//Pin-28 PC5/ADC5/SCL digital_io[23]/analog_io[16]
if(cfg_i2cm_enb) digital_io_out[23] = i2cm_clk_o;
else if(cfg_port_c_dir_sel[5]) digital_io_out[23] = port_c_out[5];
// Serial Flash
digital_io_out[24] = sflash_sck ;
digital_io_out[25] = sflash_ss[0] ;
digital_io_out[26] = sflash_ss[1] ;
digital_io_out[27] = sflash_ss[2] ;
digital_io_out[28] = sflash_ss[3] ;
digital_io_out[29] = sflash_do[0] ;
digital_io_out[30] = sflash_do[1] ;
digital_io_out[31] = sflash_do[2] ;
digital_io_out[32] = sflash_do[3] ;
// dbg_clk_mon - Pll clock output monitor
digital_io_out[33] = dbg_clk_mon;
// UART MASTER I/f
digital_io_out[34] = 1'b0 ; // RXD
digital_io_out[35] = uartm_txd ; // TXD
// USB 1.1
digital_io_out[36] = usb_dp_o ;
digital_io_out[37] = usb_dn_o ;
end
// dataoen selection
always_comb begin
digital_io_oen = 38'h3F_FFFF_FFFF;
//Pin-1 PC6/WS[0]/RESET* digital_io[0]
if(cfg_port_c_port_type[6]) digital_io_oen[0] = 1'b1;
else if(cfg_port_c_dir_sel[6]) digital_io_oen[0] = 1'b0;
//Pin-2 PD0/WS[0]/RXD[0] digital_io[1]
if (cfg_uart_enb[0]) digital_io_oen[1] = 1'b1;
else if(cfg_port_d_port_type[0])digital_io_oen[1] = 1'b1;
else if(cfg_port_d_dir_sel[0]) digital_io_oen[1] = 1'b0;
//Pin-3 PD1/WS[0]/TXD[0] digital_io[2]
if (cfg_uart_enb[0]) digital_io_oen[2] = 1'b0;
else if(cfg_port_d_port_type[1])digital_io_oen[2] = 1'b1;
else if(cfg_port_d_dir_sel[1]) digital_io_oen[2] = 1'b0;
//Pin-4 PD2/WS[0]/RXD[1]/INT0 digital_io[3]
if (cfg_uart_enb[1]) digital_io_oen[3] = 1'b1;
else if(cfg_int_enb[0]) digital_io_oen[3] = 1'b1;
else if(cfg_port_d_port_type[2])digital_io_oen[3] = 1'b1;
else if(cfg_port_d_dir_sel[2]) digital_io_oen[3] = 1'b0;
//Pin-5 PD3/WS[1]/INT1/OC2B(PWM0) digital_io[4]
if(cfg_pwm_enb[0]) digital_io_oen[4] = 1'b0;
else if(cfg_int_enb[1]) digital_io_oen[4] = 1'b1;
else if(cfg_port_d_port_type[3])digital_io_oen[4] = 1'b1;
else if(cfg_port_d_dir_sel[3]) digital_io_oen[4] = 1'b0;
//Pin-6 PD4/WS[1]/TXD[1] digital_io[5]
if (cfg_uart_enb[1]) digital_io_oen[5] = 1'b0;
else if(cfg_port_d_port_type[4])digital_io_oen[5] = 1'b1;
else if(cfg_port_d_dir_sel[4]) digital_io_oen[5] = 1'b0;
//Pin-9 PB6/WS[1]/XTAL1/TOSC1 digital_io[6]
if(cfg_port_b_port_type[6]) digital_io_oen[6] = 1'b1;
else if(cfg_port_b_dir_sel[6]) digital_io_oen[6] = 1'b0;
// Pin-10 PB7/WS[1]/XTAL2/TOSC2 digital_io[7]
if(cfg_port_b_port_type[7]) digital_io_oen[7] = 1'b1;
else if(cfg_port_b_dir_sel[7]) digital_io_oen[7] = 1'b0;
//Pin-11 PD5/WS[2]/SS[3]/OC0B(PWM1)/T1 digital_io[8]
if(cfg_pwm_enb[1]) digital_io_oen[8] = 1'b0;
else if(cfg_spim_cs_enb[3]) digital_io_oen[8] = 1'b0;
else if(cfg_port_d_port_type[5])digital_io_oen[8] = 1'b1;
else if(cfg_port_d_dir_sel[5]) digital_io_oen[8] = 1'b0;
//Pin-12 PD6/SS[2]/OC0A(PWM2)/AIN0 digital_io[9] /analog_io[2]
if(cfg_pwm_enb[2]) digital_io_oen[9] = 1'b0;
else if(cfg_spim_cs_enb[2]) digital_io_oen[9] = 1'b0;
else if(cfg_port_d_port_type[6])digital_io_oen[9] = 1'b1;
else if(cfg_port_d_dir_sel[6]) digital_io_oen[9] = 1'b0;
//Pin-13 PD7/WS[2]/A1N1 digital_io[10]/analog_io[3]
if(cfg_port_d_port_type[7]) digital_io_oen[10] = 1'b1;
else if(cfg_port_d_dir_sel[7]) digital_io_oen[10] = 1'b0;
//Pin-14 PB0/WS[2]/CLKO/ICP1 digital_io[11]
if(cfg_port_b_port_type[0]) digital_io_oen[11] = 1'b1;
else if(cfg_port_b_dir_sel[0]) digital_io_oen[11] = 1'b0;
//Pin-15 PB1/WS[3]/SS[1]/OC1A(PWM3) digital_io[12]
if(cfg_pwm_enb[3]) digital_io_oen[12] = 1'b0;
else if(cfg_spim_cs_enb[1]) digital_io_oen[12] = 1'b0;
else if(cfg_port_b_port_type[1])digital_io_oen[12] = 1'b1;
else if(cfg_port_b_dir_sel[1]) digital_io_oen[12] = 1'b0;
//Pin-16 PB2/WS[3]/SS[0]/OC1B(PWM4) digital_io[13]
if(cfg_pwm_enb[4]) digital_io_oen[13] = 1'b0;
else if(cfg_spim_cs_enb[0]) digital_io_oen[13] = 1'b0;
else if(cfg_port_b_port_type[2])digital_io_oen[13] = 1'b1;
else if(cfg_port_b_dir_sel[2]) digital_io_oen[13] = 1'b0;
//Pin-17 PB3/WS[3]/MOSI/OC2A(PWM5) digital_io[14]
if(cfg_spim_enb) digital_io_oen[14] = 1'b1; // SPIM MOSI (Input)
else if(cfg_pwm_enb[5]) digital_io_oen[14] = 1'b0;
else if(cfg_port_b_port_type[3])digital_io_oen[14] = 1'b1;
else if(cfg_port_b_dir_sel[3]) digital_io_oen[14] = 1'b0;
else if(spis_boot) digital_io_oen[14] = 1'b0; // SPIS MISO (Output)
//Pin-18 PB4/WS[3]/MISO digital_io[15]
if(cfg_spim_enb) digital_io_oen[15] = 1'b0; // SPIM MISO (Output)
else if(cfg_port_b_port_type[4])digital_io_oen[15] = 1'b1;
else if(cfg_port_b_dir_sel[4]) digital_io_oen[15] = 1'b0;
else if(spis_boot) digital_io_oen[15] = 1'b1; // SPIS MOSI (Input)
//Pin-19 PB5/SCK digital_io[16]
if(cfg_spim_enb) digital_io_oen[16] = 1'b0; // SPIM SCK (Output)
else if(cfg_port_b_dir_sel[5]) digital_io_oen[16] = 1'b0;
else if(spis_boot) digital_io_oen[16] = 1'b1; // SPIS SCK (Input)
//Pin-23 PC0/ADC0 digital_io[18]/analog_io[11]
if(cfg_port_c_dir_sel[0]) digital_io_oen[18] = 1'b0;
//Pin-24 PC1/ADC1 digital_io[19]/analog_io[12]
if(cfg_port_c_dir_sel[1]) digital_io_oen[19] = 1'b0;
//Pin-25 PC2/ADC2 digital_io[20]/analog_io[13]
if(cfg_port_c_dir_sel[2]) digital_io_oen[20] = 1'b0;
//Pin-26 PC3/ADC3 digital_io[21]/analog_io[14]
if(cfg_port_c_dir_sel[3]) digital_io_oen[21] = 1'b0;
//Pin-27 PC4/ADC4/SDA digital_io[22]/analog_io[15]
if(cfg_i2cm_enb) digital_io_oen[22] = i2cm_data_oen;
else if(cfg_port_c_dir_sel[4]) digital_io_oen[22] = 1'b0;
//Pin-28 PC5/ADC5/SCL digital_io[23]/analog_io[16]
if(cfg_i2cm_enb) digital_io_oen[23] = i2cm_clk_oen;
else if(cfg_port_c_dir_sel[5]) digital_io_oen[23] = 1'b0;
// Serial Flash
digital_io_oen[24] = 1'b0 ;
digital_io_oen[25] = 1'b0 ;
digital_io_oen[26] = 1'b0 ;
digital_io_oen[27] = 1'b0 ;
digital_io_oen[28] = 1'b0 ;
digital_io_oen[29] = sflash_oen[0];
digital_io_oen[30] = sflash_oen[1];
digital_io_oen[31] = sflash_oen[2];
digital_io_oen[32] = sflash_oen[3];
// dbg_clk_mon
digital_io_oen[33] = 1'b0 ;
// UART MASTER
digital_io_oen[34] = 1'b1; // RXD
digital_io_oen[35] = cfg_muart_dis; // TXD
// USB 1.1
digital_io_oen[36] = usb_oen;
digital_io_oen[37] = usb_oen;
end
endmodule