blob: d85c42a5190062619ba9c5423aec4cbb0e3e6a4f [file] [log] [blame]
# SPDX-FileCopyrightText: 2020 Efabless Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# SPDX-License-Identifier: Apache-2.0
# Base Configurations. Don't Touch
# section begin
# YOU ARE NOT ALLOWED TO CHANGE ANY VARIABLES DEFINED IN THE FIXED WRAPPER CFGS
source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper_empty/fixed_wrapper_cfgs.tcl
# YOU CAN CHANGE ANY VARIABLES DEFINED IN THE DEFAULT WRAPPER CFGS BY OVERRIDING THEM IN THIS CONFIG.TCL
source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper_empty/default_wrapper_cfgs.tcl
set script_dir [file dirname [file normalize [info script]]]
set proj_dir [file dirname [file normalize [info script]]]
set ::env(DESIGN_NAME) user_project_wrapper
set verilog_root $proj_dir/../../verilog/
set lef_root $proj_dir/../../lef/
set gds_root $proj_dir/../../gds/
#section end
# User Configurations
#
set ::env(DESIGN_IS_CORE) 1
set ::env(FP_PDN_CORE_RING) 1
## Source Verilog Files
set ::env(VERILOG_FILES) "\
$proj_dir/../../caravel/verilog/rtl/defines.v \
$proj_dir/../../verilog/rtl/user_project_wrapper.v"
## Clock configurations
set ::env(CLOCK_PORT) "user_clock2 wb_clk_i"
#set ::env(CLOCK_NET) "mprj.clk"
set ::env(CLOCK_PERIOD) "10"
## Internal Macros
### Macro Placement
set ::env(FP_SIZING) "absolute"
set ::env(MACRO_PLACEMENT_CFG) $proj_dir/macro.cfg
set ::env(PDN_CFG) $proj_dir/pdn.tcl
set ::env(SDC_FILE) "$proj_dir/base.sdc"
set ::env(BASE_SDC_FILE) "$proj_dir/base.sdc"
set ::env(SYNTH_READ_BLACKBOX_LIB) 1
### Black-box verilog and views
set ::env(VERILOG_FILES_BLACKBOX) "\
$proj_dir/../../verilog/gl/qspim.v \
$proj_dir/../../verilog/gl/wb_interconnect.v \
$proj_dir/../../verilog/gl/pinmux.v \
$proj_dir/../../verilog/gl/mbist1.v \
$proj_dir/../../verilog/gl/uart_i2cm_usb_spi.v \
$proj_dir/../../verilog/gl/wb_host.v \
$proj_dir/../../verilog/gl/syntacore.v \
$proj_dir/../../verilog/rtl/sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v \
"
set ::env(EXTRA_LEFS) "\
$lef_root/qspim.lef \
$lef_root/pinmux.lef \
$lef_root/wb_interconnect.lef \
$lef_root/uart_i2cm_usb_spi.lef \
$lef_root/wb_host.lef \
$lef_root/mbist1.lef \
$lef_root/syntacore.lef \
$lef_root/sky130_sram_2kbyte_1rw1r_32x512_8.lef \
"
set ::env(EXTRA_GDS_FILES) "\
$gds_root/qspim.gds \
$gds_root/pinmux.gds \
$gds_root/wb_interconnect.gds \
$gds_root/uart_i2cm_usb_spi.gds \
$gds_root/wb_host.gds \
$gds_root/mbist1.gds \
$gds_root/syntacore.gds \
$gds_root/sky130_sram_2kbyte_1rw1r_32x512_8.gds \
"
set ::env(SYNTH_DEFINES) [list SYNTHESIS ]
set ::env(VERILOG_INCLUDE_DIRS) [glob $proj_dir/../../verilog/rtl/syntacore/scr1/src/includes ]
set ::env(GLB_RT_MAXLAYER) 5
set ::env(FP_PDN_CHECK_NODES) 0
## Internal Macros
### Macro PDN Connections
set ::env(FP_PDN_ENABLE_MACROS_GRID) "1"
set ::env(FP_PDN_ENABLE_GLOBAL_CONNECTIONS) "1"
set ::env(VDD_NETS) "vccd1 vccd2 vdda1 vdda2"
set ::env(GND_NETS) "vssd1 vssd2 vssa1 vssa2"
#
set ::env(VDD_PIN) "vccd1 vccd2 vdda1 vdda2"
set ::env(GND_PIN) "vssd1 vssd2 vssa1 vssa2"
set ::env(GLB_RT_OBS) "
li1 200 165 883.1 581.54,\
met1 200 165 883.1 581.54,\
met2 200 165 883.1 581.54,\
met3 200 165 883.1 581.54,\
met4 200 195 883.1 581.54,\
li1 200 1325 883.1 1741.54,\
met1 200 1325 883.1 1741.54,\
met2 200 1325 883.1 1741.54,\
met3 200 1325 883.1 1741.54,\
li1 200 1850 883.1 2266.54,\
met1 200 1850 883.1 2266.54,\
met2 200 1850 883.1 2266.54,\
met3 200 1850 883.1 2266.54,\
li1 200 2400 883.1 2816.54,\
met1 200 2400 883.1 2816.54,\
met2 200 2400 883.1 2816.54,\
met3 200 2400 883.1 2816.54,\
li1 200 2950 883.1 3366.54,\
met1 200 2950 883.1 3366.54,\
met2 200 2950 883.1 3366.54,\
met3 200 2950 883.1 3366.54,\
met5 0 0 2920 3520"
set ::env(FP_PDN_MACRO_HOOKS) "\
u_intercon vccd1 vssd1 \
u_pinmux vccd1 vssd1 \
u_qspi_master vccd1 vssd1 \
u_riscv_top vccd1 vssd1 \
u_sram_2kb vccd1 vssd1 \
u_mbist1 vccd1 vssd1 \
u_mbist2 vccd1 vssd1 \
u_mbist3 vccd1 vssd1 \
u_mbist4 vccd1 vssd1 \
u_sram1_2kb vccd1 vssd1 \
u_sram2_2kb vccd1 vssd1 \
u_sram3_2kb vccd1 vssd1 \
u_sram4_2kb vccd1 vssd1 \
u_uart_i2c_usb_spi vccd1 vssd1 \
u_wb_host vccd1 vssd1 \
"
# The following is because there are no std cells in the example wrapper project.
set ::env(SYNTH_TOP_LEVEL) 1
set ::env(PL_RANDOM_GLB_PLACEMENT) 1
set ::env(PL_RESIZER_DESIGN_OPTIMIZATIONS) 0
set ::env(PL_RESIZER_TIMING_OPTIMIZATIONS) 0
set ::env(PL_RESIZER_BUFFER_INPUT_PORTS) 0
set ::env(PL_RESIZER_BUFFER_OUTPUT_PORTS) 0
set ::env(FP_PDN_ENABLE_RAILS) 0
set ::env(DIODE_INSERTION_STRATEGY) 0
set ::env(FILL_INSERTION) 0
set ::env(TAP_DECAP_INSERTION) 0
set ::env(CLOCK_TREE_SYNTH) 0
set ::env(QUIT_ON_LVS_ERROR) "0"
set ::env(QUIT_ON_MAGIC_DRC) "0"
set ::env(QUIT_ON_NEGATIVE_WNS) "0"
set ::env(QUIT_ON_SLEW_VIOLATIONS) "0"
set ::env(QUIT_ON_TIMING_VIOLATIONS) "0"
set ::env(QUIT_ON_TR_DRC) "0"
set ::env(FP_PDN_HPITCH) "90"
set ::env(FP_PDN_VPITCH) "180"
set ::env(FP_PDN_HSPACING) "6"