| **.subckt csfd-abstract vdd in1 in2 gnd out1 out2 tc lc1 lc2 |
| *.ipin vdd |
| *.ipin in1 |
| *.ipin in2 |
| *.ipin gnd |
| *.opin out1 |
| *.opin out2 |
| *.ipin tc |
| *.ipin lc1 |
| *.ipin lc2 |
| XM9 out1 lc1 vdd vdd sky130_fd_pr__pfet_01v8 L=0.15 W=1 nf=1 ad='int((nf+1)/2) * W/nf * 0.29' as='int((nf+2)/2) * W/nf * 0.29' |
| + pd='2*int((nf+1)/2) * (W/nf + 0.29)' ps='2*int((nf+2)/2) * (W/nf + 0.29)' nrd='0.29 / W' nrs='0.29 / W' |
| + sa=0 sb=0 sd=0 mult=1 m=1 |
| XM10 out1 in1 source gnd sky130_fd_pr__nfet_01v8 L=0.15 W=1 nf=1 ad='int((nf+1)/2) * W/nf * 0.29' as='int((nf+2)/2) * W/nf * 0.29' |
| + pd='2*int((nf+1)/2) * (W/nf + 0.29)' ps='2*int((nf+2)/2) * (W/nf + 0.29)' nrd='0.29 / W' nrs='0.29 / W' |
| + sa=0 sb=0 sd=0 mult=1 m=1 |
| XM2 lc2 lc2 vdd vdd sky130_fd_pr__pfet_01v8 L=0.15 W=1 nf=1 ad='int((nf+1)/2) * W/nf * 0.29' as='int((nf+2)/2) * W/nf * 0.29' |
| + pd='2*int((nf+1)/2) * (W/nf + 0.29)' ps='2*int((nf+2)/2) * (W/nf + 0.29)' nrd='0.29 / W' nrs='0.29 / W' |
| + sa=0 sb=0 sd=0 mult=1 m=1 |
| XM3 out2 lc2 vdd vdd sky130_fd_pr__pfet_01v8 L=0.15 W=1 nf=1 ad='int((nf+1)/2) * W/nf * 0.29' as='int((nf+2)/2) * W/nf * 0.29' |
| + pd='2*int((nf+1)/2) * (W/nf + 0.29)' ps='2*int((nf+2)/2) * (W/nf + 0.29)' nrd='0.29 / W' nrs='0.29 / W' |
| + sa=0 sb=0 sd=0 mult=1 m=1 |
| XM7 lc1 lc1 vdd vdd sky130_fd_pr__pfet_01v8 L=0.15 W=1 nf=1 ad='int((nf+1)/2) * W/nf * 0.29' as='int((nf+2)/2) * W/nf * 0.29' |
| + pd='2*int((nf+1)/2) * (W/nf + 0.29)' ps='2*int((nf+2)/2) * (W/nf + 0.29)' nrd='0.29 / W' nrs='0.29 / W' |
| + sa=0 sb=0 sd=0 mult=1 m=1 |
| XM1 source tc gnd gnd sky130_fd_pr__nfet_01v8 L=0.15 W=1 nf=1 ad='int((nf+1)/2) * W/nf * 0.29' as='int((nf+2)/2) * W/nf * 0.29' |
| + pd='2*int((nf+1)/2) * (W/nf + 0.29)' ps='2*int((nf+2)/2) * (W/nf + 0.29)' nrd='0.29 / W' nrs='0.29 / W' |
| + sa=0 sb=0 sd=0 mult=1 m=1 |
| XM4 tc tc gnd gnd sky130_fd_pr__nfet_01v8 L=0.15 W=1 nf=1 ad='int((nf+1)/2) * W/nf * 0.29' as='int((nf+2)/2) * W/nf * 0.29' |
| + pd='2*int((nf+1)/2) * (W/nf + 0.29)' ps='2*int((nf+2)/2) * (W/nf + 0.29)' nrd='0.29 / W' nrs='0.29 / W' |
| + sa=0 sb=0 sd=0 mult=1 m=1 |
| XM5 out2 in2 source gnd sky130_fd_pr__nfet_01v8 L=0.15 W=1 nf=1 ad='int((nf+1)/2) * W/nf * 0.29' as='int((nf+2)/2) * W/nf * 0.29' |
| + pd='2*int((nf+1)/2) * (W/nf + 0.29)' ps='2*int((nf+2)/2) * (W/nf + 0.29)' nrd='0.29 / W' nrs='0.29 / W' |
| + sa=0 sb=0 sd=0 mult=1 m=1 |
| **** begin user architecture code |
| ** manual skywater pdks install (with patches applied) |
| * .lib /ef/tech/SW.2/sky130A/libs.tech/ngspice/models/sky130.lib.spice tt |
| |
| ** opencircuitdesign pdks install |
| .lib /ef/tech/SW.2/sky130A/libs.tech/ngspice/sky130.lib.spice tt |
| |
| .param mc_mm_switch=0 |
| .param mc_pr_switch=0 |
| |
| |
| |
| .tran 0.000001s 0.00001s |
| .plot v(drain1) v(drain2) |
| |
| |
| **** end user architecture code |
| **.ends |
| ** flattened .save nodes |
| .end |
