blob: b4ec08e9dcb3832b5506db32145a2787597a7adc [file] [log] [blame]
Compatibility modes selected: hs a
Warning: m=xx on .subckt line will override multiplier m hierarchy!
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15221e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch -4.56262e-210
x2:clk#branch 0
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 3.41127e-05
vmeas_current_vdd#branch 3.41127e-05
v2#branch -3.41128e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 3.41127e-05
x1:vdd#branch -3.41127e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 1.82703e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 1.32034e-05 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 0.000000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 6.069309e-06 at= 1.000500e-08
vlow_outside_while = -6.047239e-06 at= 1.001500e-08
peak_to_peak_outside_while= 1.21165e-05
supply_current_rms = 5.31205e-05 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15221e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch -4.56262e-210
x2:clk#branch 0
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 3.41127e-05
vmeas_current_vdd#branch 3.41127e-05
v2#branch -3.41128e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 3.41127e-05
x1:vdd#branch -3.41127e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 1.24525e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 9.08057e-06 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.392334e-07 at= 1.000500e-08
vlow_outside_while = -1.217968e-07 at= 1.998500e-08
peak_to_peak_outside_while= 2.61030e-07
supply_current_rms = 5.10645e-05 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15221e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch -4.56262e-210
x2:clk#branch 0
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 3.41127e-05
vmeas_current_vdd#branch 3.41127e-05
v2#branch -3.41128e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 3.41127e-05
x1:vdd#branch -3.41127e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 2.06262e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 3.19881e-05 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 2.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 5.055944e-06 at= 1.000500e-08
vlow_outside_while = -5.032939e-06 at= 1.001500e-08
peak_to_peak_outside_while= 1.00889e-05
supply_current_rms = 5.33067e-05 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15221e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch -4.56262e-210
x2:clk#branch 0
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 3.41127e-05
vmeas_current_vdd#branch 3.41127e-05
v2#branch -3.41128e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 3.41127e-05
x1:vdd#branch -3.41127e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 3.51097e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 1.33524e-05 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 3.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 3.025890e-06 at= 1.000500e-08
vlow_outside_while = -3.008855e-06 at= 1.001500e-08
peak_to_peak_outside_while= 6.03475e-06
supply_current_rms = 5.93341e-05 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15221e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch -4.56262e-210
x2:clk#branch 0
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 3.41127e-05
vmeas_current_vdd#branch 3.41127e-05
v2#branch -3.41128e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 3.41127e-05
x1:vdd#branch -3.41127e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 1.88578e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 2.26002e-05 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 4.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 2.091754e-06 at= 1.000500e-08
vlow_outside_while = -2.073792e-06 at= 1.001500e-08
peak_to_peak_outside_while= 4.16555e-06
supply_current_rms = 5.14649e-05 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15221e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch -4.56262e-210
x2:clk#branch 0
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 3.41127e-05
vmeas_current_vdd#branch 3.41127e-05
v2#branch -3.41128e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 3.41127e-05
x1:vdd#branch -3.41127e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 8.40097e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 8.59100e-05 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 5.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.909158e+00 at= 1.778500e-08
vlow_outside_while = -7.737419e-02 at= 1.768500e-08
peak_to_peak_outside_while= 1.98653e+00
supply_current_rms = 9.36485e-05 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15221e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch -4.56262e-210
x2:clk#branch 0
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 3.41127e-05
vmeas_current_vdd#branch 3.41127e-05
v2#branch -3.41128e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 3.41127e-05
x1:vdd#branch -3.41127e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 9.39740e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 1.09785e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 6.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.925105e+00 at= 1.185500e-08
vlow_outside_while = -7.576951e-02 at= 1.084500e-08
peak_to_peak_outside_while= 2.00087e+00
supply_current_rms = 1.13992e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15221e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch -4.56262e-210
x2:clk#branch 0
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 3.41127e-05
vmeas_current_vdd#branch 3.41127e-05
v2#branch -3.41128e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 3.41127e-05
x1:vdd#branch -3.41127e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 4.050321e-10 targ= 2.099878e-08 trig= 2.059375e-08
fvco_outside_while = 2.46894e+09
supply_current_rms_outside_while= 2.72852e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 2.86298e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 7.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.928871e+00 at= 1.273500e-08
vlow_outside_while = -7.913834e-02 at= 1.084500e-08
peak_to_peak_outside_while= 2.00801e+00
supply_current_rms = 2.73012e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15221e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch -4.56262e-210
x2:clk#branch 0
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 3.41127e-05
vmeas_current_vdd#branch 3.41127e-05
v2#branch -3.41128e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 3.41127e-05
x1:vdd#branch -3.41127e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.861045e-10 targ= 1.586015e-08 trig= 1.557404e-08
fvco_outside_while = 3.49523e+09
supply_current_rms_outside_while= 3.85991e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 3.81517e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 8.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.927336e+00 at= 1.855500e-08
vlow_outside_while = -8.207872e-02 at= 1.669500e-08
peak_to_peak_outside_while= 2.00941e+00
supply_current_rms = 3.81693e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15221e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch -4.56262e-210
x2:clk#branch 0
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 3.41127e-05
vmeas_current_vdd#branch 3.41127e-05
v2#branch -3.41128e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 3.41127e-05
x1:vdd#branch -3.41127e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.689004e-10 targ= 1.503567e-08 trig= 1.476677e-08
fvco_outside_while = 3.71885e+09
supply_current_rms_outside_while= 4.14086e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 4.13694e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 9.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.925431e+00 at= 1.836500e-08
vlow_outside_while = -8.136220e-02 at= 1.178500e-08
peak_to_peak_outside_while= 2.00679e+00
supply_current_rms = 4.10064e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15221e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch -4.56262e-210
x2:clk#branch 0
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 3.41127e-05
vmeas_current_vdd#branch 3.41127e-05
v2#branch -3.41128e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 3.41127e-05
x1:vdd#branch -3.41127e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.639576e-10 targ= 1.480330e-08 trig= 1.453935e-08
fvco_outside_while = 3.78849e+09
supply_current_rms_outside_while= 4.42853e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 4.40599e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.000000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.924422e+00 at= 1.305500e-08
vlow_outside_while = -8.134393e-02 at= 1.451500e-08
peak_to_peak_outside_while= 2.00577e+00
supply_current_rms = 4.37730e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15221e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch -4.56262e-210
x2:clk#branch 0
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 3.41127e-05
vmeas_current_vdd#branch 3.41127e-05
v2#branch -3.41128e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 3.41127e-05
x1:vdd#branch -3.41127e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.615959e-10 targ= 1.469719e-08 trig= 1.443559e-08
fvco_outside_while = 3.82269e+09
supply_current_rms_outside_while= 4.74619e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 4.68641e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.100000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.923786e+00 at= 1.950500e-08
vlow_outside_while = -8.138805e-02 at= 1.964500e-08
peak_to_peak_outside_while= 2.00517e+00
supply_current_rms = 4.69329e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15221e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch -4.56262e-210
x2:clk#branch 0
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 3.41127e-05
vmeas_current_vdd#branch 3.41127e-05
v2#branch -3.41128e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 3.41127e-05
x1:vdd#branch -3.41127e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.604852e-10 targ= 1.464378e-08 trig= 1.438329e-08
fvco_outside_while = 3.83899e+09
supply_current_rms_outside_while= 5.42198e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 4.91991e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.200000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.923406e+00 at= 1.239500e-08
vlow_outside_while = -8.140321e-02 at= 1.253500e-08
peak_to_peak_outside_while= 2.00481e+00
supply_current_rms = 5.36757e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15221e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch -4.56262e-210
x2:clk#branch 0
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 3.41127e-05
vmeas_current_vdd#branch 3.41127e-05
v2#branch -3.41128e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 3.41127e-05
x1:vdd#branch -3.41127e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.600154e-10 targ= 1.462108e-08 trig= 1.436107e-08
fvco_outside_while = 3.84593e+09
supply_current_rms_outside_while= 3.37032e-03 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 1.19336e-03 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.300000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.922708e+00 at= 1.003500e-08
vlow_outside_while = -8.083502e-02 at= 1.017500e-08
peak_to_peak_outside_while= 2.00354e+00
supply_current_rms = 5.35448e-03 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15221e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch -4.56262e-210
x2:clk#branch 0
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 3.41127e-05
vmeas_current_vdd#branch 3.41127e-05
v2#branch -3.41128e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 3.41127e-05
x1:vdd#branch -3.41127e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.595389e-10 targ= 1.460214e-08 trig= 1.434260e-08
fvco_outside_while = 3.85299e+09
supply_current_rms_outside_while= 7.67031e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.74765e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.400000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.922986e+00 at= 1.729500e-08
vlow_outside_while = -8.138276e-02 at= 1.717500e-08
peak_to_peak_outside_while= 2.00437e+00
supply_current_rms = 7.36851e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15221e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch -4.56262e-210
x2:clk#branch 0
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 3.41127e-05
vmeas_current_vdd#branch 3.41127e-05
v2#branch -3.41128e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 3.41127e-05
x1:vdd#branch -3.41127e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.594543e-10 targ= 1.459060e-08 trig= 1.433115e-08
fvco_outside_while = 3.85424e+09
supply_current_rms_outside_while= 5.95473e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.28028e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.500000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.923008e+00 at= 1.520500e-08
vlow_outside_while = -8.132815e-02 at= 1.041500e-08
peak_to_peak_outside_while= 2.00434e+00
supply_current_rms = 5.86964e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15221e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch -4.56262e-210
x2:clk#branch 0
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 3.41127e-05
vmeas_current_vdd#branch 3.41127e-05
v2#branch -3.41128e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 3.41127e-05
x1:vdd#branch -3.41127e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.590348e-10 targ= 1.458280e-08 trig= 1.432376e-08
fvco_outside_while = 3.86048e+09
supply_current_rms_outside_while= 5.67402e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.24414e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.600000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.923034e+00 at= 1.208500e-08
vlow_outside_while = -8.127742e-02 at= 1.585500e-08
peak_to_peak_outside_while= 2.00431e+00
supply_current_rms = 5.57819e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15221e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch -4.56262e-210
x2:clk#branch 0
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 3.41127e-05
vmeas_current_vdd#branch 3.41127e-05
v2#branch -3.41128e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 3.41127e-05
x1:vdd#branch -3.41127e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.593316e-10 targ= 1.457705e-08 trig= 1.431772e-08
fvco_outside_while = 3.85607e+09
supply_current_rms_outside_while= 5.58777e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.24734e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.700000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.923047e+00 at= 1.052500e-08
vlow_outside_while = -8.123211e-02 at= 1.999500e-08
peak_to_peak_outside_while= 2.00428e+00
supply_current_rms = 5.48928e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15221e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch -4.56262e-210
x2:clk#branch 0
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 3.41127e-05
vmeas_current_vdd#branch 3.41127e-05
v2#branch -3.41128e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 3.41127e-05
x1:vdd#branch -3.41127e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.588883e-10 targ= 1.457167e-08 trig= 1.431278e-08
fvco_outside_while = 3.86267e+09
supply_current_rms_outside_while= 5.54318e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.25611e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.923054e+00 at= 1.518500e-08
vlow_outside_while = -8.121322e-02 at= 1.247500e-08
peak_to_peak_outside_while= 2.00427e+00
supply_current_rms = 5.43529e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Measurements for Transient Analysis
tvco_outside_while = 2.588883e-10 targ= 1.457167e-08 trig= 1.431278e-08
Original line no.: 0, new internal line no.: 12503:
insertnumber: fails.
s = ".meas tran fvco_outside_while param= 3.862669028224071e+09 " u=" 3.862669028224071e+09 " id=0
fvco_outside_while = 3.86267e+09
supply_current_rms_outside_while= 5.54318e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.25611e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.923054e+00 at= 1.518500e-08
vlow_outside_while = -8.121322e-02 at= 1.247500e-08
Original line no.: 0, new internal line no.: 12509:
insertnumber: fails.
s = ".meas tran peak_to_peak_outside_while param= 2.004267694949307e+00 " u=" 2.004267694949307e+00 " id=0
peak_to_peak_outside_while= 2.00427e+00
supply_current_rms = 5.43529e-04 from= 0.00000e+00 to= 7.00000e-08
Total analysis time (seconds) = 8.14383
Total CPU time (seconds) = 167.147
Total DRAM available = 7955.125 MB.
DRAM currently available = 1603.668 MB.
Maximum ngspice program size = 684.789 MB.
Current ngspice program size = 665.348 MB.
Shared ngspice pages = 8.277 MB.
Text (code) pages = 7.879 MB.
Stack = 0 bytes.
Library pages = 657.309 MB.