| |
| Compatibility modes selected: hs a |
| |
| Warning: m=xx on .subckt line will override multiplier m hierarchy! |
| |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 3.38361e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.86650e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 0.000000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.926907e+00 at= 1.034500e-08 |
| vlow_outside_while = -8.116158e-02 at= 1.016500e-08 |
| peak_to_peak_outside_while= 2.00807e+00 |
| supply_current_rms = 5.59574e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 4.62342e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.49880e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.122765e-05 at= 1.048500e-08 |
| vlow_outside_while = -1.121234e-05 at= 1.049500e-08 |
| peak_to_peak_outside_while= 2.24400e-05 |
| supply_current_rms = 6.58514e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 2.28524e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 2.89048e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 2.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 8.200122e-06 at= 1.001500e-08 |
| vlow_outside_while = -8.197467e-06 at= 1.000500e-08 |
| peak_to_peak_outside_while= 1.63976e-05 |
| supply_current_rms = 5.47382e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 5.24008e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.29688e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 3.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 2.438409e-06 at= 1.001500e-08 |
| vlow_outside_while = -2.432477e-06 at= 1.000500e-08 |
| peak_to_peak_outside_while= 4.87089e-06 |
| supply_current_rms = 7.00545e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 4.72235e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.86317e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 4.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 8.051442e-06 at= 1.001500e-08 |
| vlow_outside_while = -8.074358e-06 at= 1.000500e-08 |
| peak_to_peak_outside_while= 1.61258e-05 |
| supply_current_rms = 6.66147e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 7.62886e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 7.64586e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 5.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929096e+00 at= 1.098500e-08 |
| vlow_outside_while = -8.057387e-02 at= 1.082500e-08 |
| peak_to_peak_outside_while= 2.00967e+00 |
| supply_current_rms = 9.64272e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 2.13201e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 1.52693e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 6.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929116e+00 at= 1.307500e-08 |
| vlow_outside_while = -7.809854e-02 at= 1.320500e-08 |
| peak_to_peak_outside_while= 2.00721e+00 |
| supply_current_rms = 2.04837e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 3.874020e-10 targ= 2.316262e-08 trig= 2.277522e-08 |
| fvco_outside_while = 2.58130e+09 |
| supply_current_rms_outside_while= 2.97628e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.04343e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 7.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.930634e+00 at= 1.057500e-08 |
| vlow_outside_while = -7.665092e-02 at= 1.382500e-08 |
| peak_to_peak_outside_while= 2.00728e+00 |
| supply_current_rms = 2.90110e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.716194e-10 targ= 1.646168e-08 trig= 1.619006e-08 |
| fvco_outside_while = 3.68162e+09 |
| supply_current_rms_outside_while= 4.31981e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.31471e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 8.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.926496e+00 at= 1.520500e-08 |
| vlow_outside_while = -8.394625e-02 at= 1.616500e-08 |
| peak_to_peak_outside_while= 2.01044e+00 |
| supply_current_rms = 4.22985e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.537990e-10 targ= 1.497657e-08 trig= 1.472277e-08 |
| fvco_outside_while = 3.94013e+09 |
| supply_current_rms_outside_while= 4.64009e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.59466e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 9.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.916009e+00 at= 1.505500e-08 |
| vlow_outside_while = -8.520592e-02 at= 1.748500e-08 |
| peak_to_peak_outside_while= 2.00122e+00 |
| supply_current_rms = 4.56287e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.481102e-10 targ= 1.460580e-08 trig= 1.435769e-08 |
| fvco_outside_while = 4.03047e+09 |
| supply_current_rms_outside_while= 4.83009e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.83304e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.000000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.902348e+00 at= 1.963500e-08 |
| vlow_outside_while = -8.560364e-02 at= 1.755500e-08 |
| peak_to_peak_outside_while= 1.98795e+00 |
| supply_current_rms = 4.75216e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.452788e-10 targ= 1.442304e-08 trig= 1.417776e-08 |
| fvco_outside_while = 4.07699e+09 |
| supply_current_rms_outside_while= 5.06048e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.07875e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.100000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.886091e+00 at= 1.473500e-08 |
| vlow_outside_while = -8.573665e-02 at= 1.071500e-08 |
| peak_to_peak_outside_while= 1.97183e+00 |
| supply_current_rms = 4.98121e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.439906e-10 targ= 1.432154e-08 trig= 1.407755e-08 |
| fvco_outside_while = 4.09852e+09 |
| supply_current_rms_outside_while= 5.25318e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.28107e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.200000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.873735e+00 at= 1.609500e-08 |
| vlow_outside_while = -8.575339e-02 at= 1.722500e-08 |
| peak_to_peak_outside_while= 1.95949e+00 |
| supply_current_rms = 5.17242e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.434753e-10 targ= 1.426312e-08 trig= 1.401965e-08 |
| fvco_outside_while = 4.10719e+09 |
| supply_current_rms_outside_while= 5.35285e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.37410e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.300000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.868167e+00 at= 1.286500e-08 |
| vlow_outside_while = -8.571639e-02 at= 1.277500e-08 |
| peak_to_peak_outside_while= 1.95388e+00 |
| supply_current_rms = 5.27396e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.433372e-10 targ= 1.422480e-08 trig= 1.398147e-08 |
| fvco_outside_while = 4.10952e+09 |
| supply_current_rms_outside_while= 5.42015e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.43894e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.400000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.865134e+00 at= 1.258500e-08 |
| vlow_outside_while = -8.570167e-02 at= 1.322500e-08 |
| peak_to_peak_outside_while= 1.95084e+00 |
| supply_current_rms = 5.33892e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.429655e-10 targ= 1.419742e-08 trig= 1.395446e-08 |
| fvco_outside_while = 4.11581e+09 |
| supply_current_rms_outside_while= 5.47344e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.48572e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.500000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.863160e+00 at= 1.304500e-08 |
| vlow_outside_while = -8.567741e-02 at= 1.708500e-08 |
| peak_to_peak_outside_while= 1.94884e+00 |
| supply_current_rms = 5.38944e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.428288e-10 targ= 1.417689e-08 trig= 1.393406e-08 |
| fvco_outside_while = 4.11813e+09 |
| supply_current_rms_outside_while= 5.50409e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.51593e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.600000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.861770e+00 at= 1.836500e-08 |
| vlow_outside_while = -8.566965e-02 at= 1.730500e-08 |
| peak_to_peak_outside_while= 1.94744e+00 |
| supply_current_rms = 5.42178e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.424671e-10 targ= 1.416083e-08 trig= 1.391836e-08 |
| fvco_outside_while = 4.12427e+09 |
| supply_current_rms_outside_while= 5.53132e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.54438e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.700000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.860742e+00 at= 1.349500e-08 |
| vlow_outside_while = -8.565540e-02 at= 1.898500e-08 |
| peak_to_peak_outside_while= 1.94640e+00 |
| supply_current_rms = 5.44876e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.424380e-10 targ= 1.414821e-08 trig= 1.390577e-08 |
| fvco_outside_while = 4.12477e+09 |
| supply_current_rms_outside_while= 5.54965e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.56177e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.859954e+00 at= 1.469500e-08 |
| vlow_outside_while = -8.564857e-02 at= 1.945500e-08 |
| peak_to_peak_outside_while= 1.94560e+00 |
| supply_current_rms = 5.46738e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.424380e-10 targ= 1.414821e-08 trig= 1.390577e-08 |
| Original line no.: 0, new internal line no.: 12460: |
| insertnumber: fails. |
| s = ".meas tran fvco_outside_while param= 4.124765509710453e+09 " u=" 4.124765509710453e+09 " id=0 |
| fvco_outside_while = 4.12477e+09 |
| supply_current_rms_outside_while= 5.54965e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.56177e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.859954e+00 at= 1.469500e-08 |
| vlow_outside_while = -8.564857e-02 at= 1.945500e-08 |
| Original line no.: 0, new internal line no.: 12466: |
| insertnumber: fails. |
| s = ".meas tran peak_to_peak_outside_while param= 1.945602402679072e+00 " u=" 1.945602402679072e+00 " id=0 |
| peak_to_peak_outside_while= 1.94560e+00 |
| supply_current_rms = 5.46738e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| |
| Total analysis time (seconds) = 15.5163 |
| |
| Total CPU time (seconds) = 298.935 |
| |
| Total DRAM available = 7952.234 MB. |
| DRAM currently available = 3992.711 MB. |
| Maximum ngspice program size = 684.805 MB. |
| Current ngspice program size = 665.617 MB. |
| |
| Shared ngspice pages = 8.531 MB. |
| Text (code) pages = 7.879 MB. |
| Stack = 0 bytes. |
| Library pages = 657.320 MB. |
| |