| |
| Compatibility modes selected: hs a |
| |
| Warning: m=xx on .subckt line will override multiplier m hierarchy! |
| |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16221e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net5 1.79999 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 2.05613e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 1.62155e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 0.000000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 7.025800e-07 at= 1.001500e-08 |
| vlow_outside_while = -4.252659e-07 at= 1.000500e-08 |
| peak_to_peak_outside_while= 1.12785e-06 |
| supply_current_rms = 5.68618e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16221e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net5 1.79999 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 6.28402e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.71940e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 8.841604e-06 at= 1.001500e-08 |
| vlow_outside_while = -8.843895e-06 at= 1.000500e-08 |
| peak_to_peak_outside_while= 1.76855e-05 |
| supply_current_rms = 7.97736e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16221e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net5 1.79999 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 5.53439e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 8.14628e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 2.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 8.629707e-06 at= 1.000500e-08 |
| vlow_outside_while = -8.597268e-06 at= 1.001500e-08 |
| peak_to_peak_outside_while= 1.72270e-05 |
| supply_current_rms = 7.57548e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16221e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net5 1.79999 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 7.51943e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.38729e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 3.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 2.396429e-06 at= 1.001500e-08 |
| vlow_outside_while = -2.396714e-06 at= 1.000500e-08 |
| peak_to_peak_outside_while= 4.79314e-06 |
| supply_current_rms = 8.85055e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16221e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net5 1.79999 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 2.98329e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.10136e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 4.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 2.434116e-06 at= 1.001500e-08 |
| vlow_outside_while = -2.017900e-06 at= 1.000500e-08 |
| peak_to_peak_outside_while= 4.45202e-06 |
| supply_current_rms = 6.06247e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16221e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net5 1.79999 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 4.08605e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.53544e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 5.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 9.649351e-06 at= 1.000500e-08 |
| vlow_outside_while = -9.626865e-06 at= 1.001500e-08 |
| peak_to_peak_outside_while= 1.92762e-05 |
| supply_current_rms = 6.46940e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16221e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net5 1.79999 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 9.29646e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 9.60723e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 6.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.927910e+00 at= 1.348500e-08 |
| vlow_outside_while = -8.329762e-02 at= 1.321500e-08 |
| peak_to_peak_outside_while= 2.01121e+00 |
| supply_current_rms = 1.03902e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16221e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net5 1.79999 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 8.200376e-10 targ= 4.025589e-08 trig= 3.943586e-08 |
| fvco_outside_while = 1.21946e+09 |
| supply_current_rms_outside_while= 1.84693e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 1.90656e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 7.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.927920e+00 at= 1.531500e-08 |
| vlow_outside_while = -8.363308e-02 at= 1.984500e-08 |
| peak_to_peak_outside_while= 2.01155e+00 |
| supply_current_rms = 2.31236e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16221e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net5 1.79999 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 4.144382e-10 targ= 2.247902e-08 trig= 2.206458e-08 |
| fvco_outside_while = 2.41291e+09 |
| supply_current_rms_outside_while= 2.85780e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 2.78834e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 8.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.928235e+00 at= 1.144500e-08 |
| vlow_outside_while = -8.431197e-02 at= 1.457500e-08 |
| peak_to_peak_outside_while= 2.01255e+00 |
| supply_current_rms = 2.82423e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16221e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net5 1.79999 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 3.117599e-10 targ= 1.746479e-08 trig= 1.715303e-08 |
| fvco_outside_while = 3.20760e+09 |
| supply_current_rms_outside_while= 3.86477e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.85405e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 9.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.928057e+00 at= 1.603500e-08 |
| vlow_outside_while = -8.287037e-02 at= 1.432500e-08 |
| peak_to_peak_outside_while= 2.01093e+00 |
| supply_current_rms = 3.81097e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16221e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net5 1.79999 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.938028e-10 targ= 1.656001e-08 trig= 1.626621e-08 |
| fvco_outside_while = 3.40364e+09 |
| supply_current_rms_outside_while= 4.35021e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.33586e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.000000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.927215e+00 at= 1.079500e-08 |
| vlow_outside_while = -8.202671e-02 at= 1.506500e-08 |
| peak_to_peak_outside_while= 2.00924e+00 |
| supply_current_rms = 4.28720e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16221e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net5 1.79999 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.850914e-10 targ= 1.606494e-08 trig= 1.577985e-08 |
| fvco_outside_while = 3.50765e+09 |
| supply_current_rms_outside_while= 4.74465e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.71483e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.100000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.926757e+00 at= 1.418500e-08 |
| vlow_outside_while = -8.110428e-02 at= 1.575500e-08 |
| peak_to_peak_outside_while= 2.00786e+00 |
| supply_current_rms = 4.67260e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16221e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net5 1.79999 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.790268e-10 targ= 1.577026e-08 trig= 1.549123e-08 |
| fvco_outside_while = 3.58389e+09 |
| supply_current_rms_outside_while= 5.22855e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.00152e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.200000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.926569e+00 at= 1.476500e-08 |
| vlow_outside_while = -8.041709e-02 at= 1.881500e-08 |
| peak_to_peak_outside_while= 2.00699e+00 |
| supply_current_rms = 5.13770e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16221e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net5 1.79999 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.760857e-10 targ= 1.587558e-08 trig= 1.559949e-08 |
| fvco_outside_while = 3.62206e+09 |
| supply_current_rms_outside_while= 5.14872e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.13950e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.300000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.926541e+00 at= 1.019500e-08 |
| vlow_outside_while = -7.954191e-02 at= 1.557500e-08 |
| peak_to_peak_outside_while= 2.00608e+00 |
| supply_current_rms = 5.07645e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16221e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net5 1.79999 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.734010e-10 targ= 1.576064e-08 trig= 1.548724e-08 |
| fvco_outside_while = 3.65763e+09 |
| supply_current_rms_outside_while= 5.23104e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.21809e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.400000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.926521e+00 at= 1.696500e-08 |
| vlow_outside_while = -7.892371e-02 at= 1.026500e-08 |
| peak_to_peak_outside_while= 2.00544e+00 |
| supply_current_rms = 5.15498e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16221e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net5 1.79999 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.718749e-10 targ= 1.567936e-08 trig= 1.540748e-08 |
| fvco_outside_while = 3.67816e+09 |
| supply_current_rms_outside_while= 5.28488e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.27383e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.500000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.926493e+00 at= 1.932500e-08 |
| vlow_outside_while = -7.846929e-02 at= 1.021500e-08 |
| peak_to_peak_outside_while= 2.00496e+00 |
| supply_current_rms = 5.21327e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16221e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net5 1.79999 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.707615e-10 targ= 1.561871e-08 trig= 1.534795e-08 |
| fvco_outside_while = 3.69329e+09 |
| supply_current_rms_outside_while= 5.33174e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.32317e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.600000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.926527e+00 at= 1.789500e-08 |
| vlow_outside_while = -7.812532e-02 at= 1.261500e-08 |
| peak_to_peak_outside_while= 2.00465e+00 |
| supply_current_rms = 5.25555e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16221e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net5 1.79999 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.699146e-10 targ= 1.557347e-08 trig= 1.530356e-08 |
| fvco_outside_while = 3.70488e+09 |
| supply_current_rms_outside_while= 5.37077e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.35532e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.700000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.926524e+00 at= 1.001500e-08 |
| vlow_outside_while = -7.601775e-02 at= 1.986500e-08 |
| peak_to_peak_outside_while= 2.00254e+00 |
| supply_current_rms = 5.28741e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16221e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net5 1.79999 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.692925e-10 targ= 1.553575e-08 trig= 1.526645e-08 |
| fvco_outside_while = 3.71343e+09 |
| supply_current_rms_outside_while= 5.39514e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.38203e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.926548e+00 at= 1.914500e-08 |
| vlow_outside_while = -7.762978e-02 at= 1.416500e-08 |
| peak_to_peak_outside_while= 2.00418e+00 |
| supply_current_rms = 5.31855e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.692925e-10 targ= 1.553575e-08 trig= 1.526645e-08 |
| Original line no.: 0, new internal line no.: 12460: |
| insertnumber: fails. |
| s = ".meas tran fvco_outside_while param= 3.713433935801915e+09 " u=" 3.713433935801915e+09 " id=0 |
| fvco_outside_while = 3.71343e+09 |
| supply_current_rms_outside_while= 5.39514e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.38203e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.926548e+00 at= 1.914500e-08 |
| vlow_outside_while = -7.762978e-02 at= 1.416500e-08 |
| Original line no.: 0, new internal line no.: 12466: |
| insertnumber: fails. |
| s = ".meas tran peak_to_peak_outside_while param= 2.004178094097200e+00 " u=" 2.004178094097200e+00 " id=0 |
| peak_to_peak_outside_while= 2.00418e+00 |
| supply_current_rms = 5.31855e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| |
| Total analysis time (seconds) = 10.2395 |
| |
| Total CPU time (seconds) = 203.646 |
| |
| Total DRAM available = 7952.234 MB. |
| DRAM currently available = 117.641 MB. |
| Maximum ngspice program size = 684.824 MB. |
| Current ngspice program size = 665.957 MB. |
| |
| Shared ngspice pages = 8.852 MB. |
| Text (code) pages = 7.879 MB. |
| Stack = 0 bytes. |
| Library pages = 657.340 MB. |
| |
