blob: 2a77c710a7135ca86820172fdc0613faeb743b73 [file] [log] [blame]
Compatibility modes selected: hs a
Warning: m=xx on .subckt line will override multiplier m hierarchy!
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15224e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07605e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03802e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80998e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch 0
x2:vdd#branch 4.88498e-15
vmeas_current_gnd#branch 4.62723e-05
vmeas_current_vdd#branch 4.62723e-05
v2#branch -4.62724e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 4.62723e-05
x1:vdd#branch -4.62723e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 2.53138e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 4.26057e-05 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 0.000000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.129125e-06 at= 1.001500e-08
vlow_outside_while = -1.118302e-06 at= 1.000500e-08
peak_to_peak_outside_while= 2.24743e-06
supply_current_rms = 5.47458e-05 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15224e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07605e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03802e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80998e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch 0
x2:vdd#branch 4.88498e-15
vmeas_current_gnd#branch 4.62723e-05
vmeas_current_vdd#branch 4.62723e-05
v2#branch -4.62724e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 4.62723e-05
x1:vdd#branch -4.62723e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 3.15793e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 1.87151e-05 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 2.886023e-06 at= 1.000500e-08
vlow_outside_while = -2.868703e-06 at= 1.001500e-08
peak_to_peak_outside_while= 5.75473e-06
supply_current_rms = 5.73279e-05 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15224e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07605e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03802e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80998e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch 0
x2:vdd#branch 4.88498e-15
vmeas_current_gnd#branch 4.62723e-05
vmeas_current_vdd#branch 4.62723e-05
v2#branch -4.62724e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 4.62723e-05
x1:vdd#branch -4.62723e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 3.39398e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 2.09614e-05 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 2.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 7.266411e-07 at= 1.001500e-08
vlow_outside_while = -7.143019e-07 at= 1.000500e-08
peak_to_peak_outside_while= 1.44094e-06
supply_current_rms = 5.89225e-05 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15224e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07605e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03802e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80998e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch 0
x2:vdd#branch 4.88498e-15
vmeas_current_gnd#branch 4.62723e-05
vmeas_current_vdd#branch 4.62723e-05
v2#branch -4.62724e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 4.62723e-05
x1:vdd#branch -4.62723e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 2.63014e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 2.62008e-05 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 3.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 8.848695e-07 at= 1.814500e-08
vlow_outside_while = -8.712259e-07 at= 1.815500e-08
peak_to_peak_outside_while= 1.75610e-06
supply_current_rms = 5.46776e-05 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15224e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07605e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03802e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80998e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch 0
x2:vdd#branch 4.88498e-15
vmeas_current_gnd#branch 4.62723e-05
vmeas_current_vdd#branch 4.62723e-05
v2#branch -4.62724e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 4.62723e-05
x1:vdd#branch -4.62723e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 1.65309e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 2.45277e-05 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 4.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 5.051472e-06 at= 1.000500e-08
vlow_outside_while = -5.030846e-06 at= 1.001500e-08
peak_to_peak_outside_while= 1.00823e-05
supply_current_rms = 5.19956e-05 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15224e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07605e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03802e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80998e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch 0
x2:vdd#branch 4.88498e-15
vmeas_current_gnd#branch 4.62723e-05
vmeas_current_vdd#branch 4.62723e-05
v2#branch -4.62724e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 4.62723e-05
x1:vdd#branch -4.62723e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 7.04542e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 6.75481e-05 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 5.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.922754e+00 at= 1.472500e-08
vlow_outside_while = -8.342222e-02 at= 1.459500e-08
peak_to_peak_outside_while= 2.00618e+00
supply_current_rms = 8.42989e-05 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15224e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07605e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03802e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80998e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch 0
x2:vdd#branch 4.88498e-15
vmeas_current_gnd#branch 4.62723e-05
vmeas_current_vdd#branch 4.62723e-05
v2#branch -4.62724e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 4.62723e-05
x1:vdd#branch -4.62723e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 9.13072e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 1.05355e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 6.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.923655e+00 at= 1.197500e-08
vlow_outside_while = -8.147752e-02 at= 1.011500e-08
peak_to_peak_outside_while= 2.00513e+00
supply_current_rms = 1.04676e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15224e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07605e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03802e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80998e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch 0
x2:vdd#branch 4.88498e-15
vmeas_current_gnd#branch 4.62723e-05
vmeas_current_vdd#branch 4.62723e-05
v2#branch -4.62724e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 4.62723e-05
x1:vdd#branch -4.62723e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 6.149339e-10 targ= 3.079698e-08 trig= 3.018205e-08
fvco_outside_while = 1.62619e+09
supply_current_rms_outside_while= 2.28230e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 2.35744e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 7.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.929407e+00 at= 1.956500e-08
vlow_outside_while = -8.148000e-02 at= 1.171500e-08
peak_to_peak_outside_while= 2.01089e+00
supply_current_rms = 2.29102e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15224e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07605e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03802e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80998e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch 0
x2:vdd#branch 4.88498e-15
vmeas_current_gnd#branch 4.62723e-05
vmeas_current_vdd#branch 4.62723e-05
v2#branch -4.62724e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 4.62723e-05
x1:vdd#branch -4.62723e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 3.402937e-10 targ= 1.843733e-08 trig= 1.809704e-08
fvco_outside_while = 2.93864e+09
supply_current_rms_outside_while= 3.95843e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 3.81187e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 8.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.929528e+00 at= 1.927500e-08
vlow_outside_while = -8.477888e-02 at= 1.126500e-08
peak_to_peak_outside_while= 2.01431e+00
supply_current_rms = 3.93347e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15224e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07605e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03802e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80998e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch 0
x2:vdd#branch 4.88498e-15
vmeas_current_gnd#branch 4.62723e-05
vmeas_current_vdd#branch 4.62723e-05
v2#branch -4.62724e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 4.62723e-05
x1:vdd#branch -4.62723e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.811130e-10 targ= 1.563638e-08 trig= 1.535526e-08
fvco_outside_while = 3.55729e+09
supply_current_rms_outside_while= 4.44171e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 4.34395e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 9.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.927479e+00 at= 1.771500e-08
vlow_outside_while = -8.313838e-02 at= 1.842500e-08
peak_to_peak_outside_while= 2.01062e+00
supply_current_rms = 4.39213e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15224e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07605e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03802e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80998e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch 0
x2:vdd#branch 4.88498e-15
vmeas_current_gnd#branch 4.62723e-05
vmeas_current_vdd#branch 4.62723e-05
v2#branch -4.62724e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 4.62723e-05
x1:vdd#branch -4.62723e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.645656e-10 targ= 1.482535e-08 trig= 1.456079e-08
fvco_outside_while = 3.77978e+09
supply_current_rms_outside_while= 4.77452e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 4.73556e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.000000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.924861e+00 at= 1.201500e-08
vlow_outside_while = -8.294165e-02 at= 1.189500e-08
peak_to_peak_outside_while= 2.00780e+00
supply_current_rms = 4.71489e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15224e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07605e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03802e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80998e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch 0
x2:vdd#branch 4.88498e-15
vmeas_current_gnd#branch 4.62723e-05
vmeas_current_vdd#branch 4.62723e-05
v2#branch -4.62724e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 4.62723e-05
x1:vdd#branch -4.62723e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.580450e-10 targ= 1.453970e-08 trig= 1.428165e-08
fvco_outside_while = 3.87529e+09
supply_current_rms_outside_while= 5.14205e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.05654e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.100000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.923061e+00 at= 1.669500e-08
vlow_outside_while = -8.314189e-02 at= 1.890500e-08
peak_to_peak_outside_while= 2.00620e+00
supply_current_rms = 5.07687e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15224e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07605e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03802e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80998e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch 0
x2:vdd#branch 4.88498e-15
vmeas_current_gnd#branch 4.62723e-05
vmeas_current_vdd#branch 4.62723e-05
v2#branch -4.62724e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 4.62723e-05
x1:vdd#branch -4.62723e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.551504e-10 targ= 1.440888e-08 trig= 1.415373e-08
fvco_outside_while = 3.91926e+09
supply_current_rms_outside_while= 5.28857e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.28067e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.200000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.921963e+00 at= 1.960500e-08
vlow_outside_while = -8.310749e-02 at= 1.157500e-08
peak_to_peak_outside_while= 2.00507e+00
supply_current_rms = 5.22046e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15224e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07605e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03802e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80998e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch 0
x2:vdd#branch 4.88498e-15
vmeas_current_gnd#branch 4.62723e-05
vmeas_current_vdd#branch 4.62723e-05
v2#branch -4.62724e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 4.62723e-05
x1:vdd#branch -4.62723e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.543894e-10 targ= 1.434598e-08 trig= 1.409159e-08
fvco_outside_while = 3.93098e+09
supply_current_rms_outside_while= 5.40069e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.40066e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.300000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.921515e+00 at= 1.646500e-08
vlow_outside_while = -8.303452e-02 at= 1.330500e-08
peak_to_peak_outside_while= 2.00455e+00
supply_current_rms = 5.33387e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15224e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07605e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03802e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80998e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch 0
x2:vdd#branch 4.88498e-15
vmeas_current_gnd#branch 4.62723e-05
vmeas_current_vdd#branch 4.62723e-05
v2#branch -4.62724e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 4.62723e-05
x1:vdd#branch -4.62723e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.530863e-10 targ= 1.430734e-08 trig= 1.405426e-08
fvco_outside_while = 3.95122e+09
supply_current_rms_outside_while= 5.65461e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.46543e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.400000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.920838e+00 at= 1.008500e-08
vlow_outside_while = -8.223664e-02 at= 1.073500e-08
peak_to_peak_outside_while= 2.00308e+00
supply_current_rms = 5.89111e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15224e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07605e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03802e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80998e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch 0
x2:vdd#branch 4.88498e-15
vmeas_current_gnd#branch 4.62723e-05
vmeas_current_vdd#branch 4.62723e-05
v2#branch -4.62724e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 4.62723e-05
x1:vdd#branch -4.62723e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.528223e-10 targ= 1.428095e-08 trig= 1.402813e-08
fvco_outside_while = 3.95535e+09
supply_current_rms_outside_while= 5.51524e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.51855e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.500000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.921123e+00 at= 1.967500e-08
vlow_outside_while = -8.289089e-02 at= 1.501500e-08
peak_to_peak_outside_while= 2.00401e+00
supply_current_rms = 5.45116e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15224e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07605e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03802e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80998e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch 0
x2:vdd#branch 4.88498e-15
vmeas_current_gnd#branch 4.62723e-05
vmeas_current_vdd#branch 4.62723e-05
v2#branch -4.62724e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 4.62723e-05
x1:vdd#branch -4.62723e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.525764e-10 targ= 1.426188e-08 trig= 1.400930e-08
fvco_outside_while = 3.95920e+09
supply_current_rms_outside_while= 5.55120e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.55420e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.600000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.921023e+00 at= 1.308500e-08
vlow_outside_while = -8.283867e-02 at= 1.398500e-08
peak_to_peak_outside_while= 2.00386e+00
supply_current_rms = 5.48506e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15224e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07605e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03802e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80998e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch 0
x2:vdd#branch 4.88498e-15
vmeas_current_gnd#branch 4.62723e-05
vmeas_current_vdd#branch 4.62723e-05
v2#branch -4.62724e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 4.62723e-05
x1:vdd#branch -4.62723e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.517866e-10 targ= 1.424729e-08 trig= 1.399550e-08
fvco_outside_while = 3.97162e+09
supply_current_rms_outside_while= 5.58213e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.58070e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.700000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.920948e+00 at= 1.584500e-08
vlow_outside_while = -8.280451e-02 at= 1.447500e-08
peak_to_peak_outside_while= 2.00375e+00
supply_current_rms = 5.51428e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_out_x1_3 6.80528e-09
int_net1_x1_1 1.8
int_net2_x1_2 0
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.15224e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07605e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03802e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80998e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch 0
x2:vdd#branch 4.88498e-15
vmeas_current_gnd#branch 4.62723e-05
vmeas_current_vdd#branch 4.62723e-05
v2#branch -4.62724e-05
x1:vctrl#branch 0
x1:out#branch 0
x1:vss#branch 4.62723e-05
x1:vdd#branch -4.62723e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.517535e-10 targ= 1.423614e-08 trig= 1.398439e-08
fvco_outside_while = 3.97214e+09
supply_current_rms_outside_while= 5.60065e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.59951e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.920877e+00 at= 1.356500e-08
vlow_outside_while = -8.274649e-02 at= 1.068500e-08
peak_to_peak_outside_while= 2.00362e+00
supply_current_rms = 5.53288e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Measurements for Transient Analysis
tvco_outside_while = 2.517535e-10 targ= 1.423614e-08 trig= 1.398439e-08
Original line no.: 0, new internal line no.: 12503:
insertnumber: fails.
s = ".meas tran fvco_outside_while param= 3.972140146074597e+09 " u=" 3.972140146074597e+09 " id=0
fvco_outside_while = 3.97214e+09
supply_current_rms_outside_while= 5.60065e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.59951e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.920877e+00 at= 1.356500e-08
vlow_outside_while = -8.274649e-02 at= 1.068500e-08
Original line no.: 0, new internal line no.: 12509:
insertnumber: fails.
s = ".meas tran peak_to_peak_outside_while param= 2.003623330469933e+00 " u=" 2.003623330469933e+00 " id=0
peak_to_peak_outside_while= 2.00362e+00
supply_current_rms = 5.53288e-04 from= 0.00000e+00 to= 7.00000e-08
Total analysis time (seconds) = 11.1922
Total CPU time (seconds) = 226.012
Total DRAM available = 7955.125 MB.
DRAM currently available = 1973.199 MB.
Maximum ngspice program size = 684.738 MB.
Current ngspice program size = 665.977 MB.
Shared ngspice pages = 8.957 MB.
Text (code) pages = 7.879 MB.
Stack = 0 bytes.
Library pages = 657.258 MB.