blob: 15920465ecbe4b2dcebbf3982533556b6c5eaf02 [file] [log] [blame]
Compatibility modes selected: hs a
Warning: m=xx on .subckt line will override multiplier m hierarchy!
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_net1_x1_1 1.8
int_net2_x1_2 0
int_out_x1_3 6.80528e-09
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.1522e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch -4.84676e-27
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 4.57125e-05
vmeas_current_vdd#branch 4.57125e-05
v2#branch -4.57126e-05
x1:vctrl#branch 0
x1:out#branch 4.84676e-27
x1:vss#branch 4.57125e-05
x1:vdd#branch -4.57125e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 1.62553e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.84734e-05 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 0.000000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 6.006177e-06 at= 1.000500e-08
vlow_outside_while = -5.981220e-06 at= 1.001500e-08
peak_to_peak_outside_while= 1.19874e-05
supply_current_rms = 5.51701e-05 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_net1_x1_1 1.8
int_net2_x1_2 0
int_out_x1_3 6.80528e-09
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.1522e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch -4.84676e-27
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 4.57125e-05
vmeas_current_vdd#branch 4.57125e-05
v2#branch -4.57126e-05
x1:vctrl#branch 0
x1:out#branch 4.84676e-27
x1:vss#branch 4.57125e-05
x1:vdd#branch -4.57125e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 1.59364e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 1.70511e-05 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 4.275696e-06 at= 1.000500e-08
vlow_outside_while = -4.255813e-06 at= 1.001500e-08
peak_to_peak_outside_while= 8.53151e-06
supply_current_rms = 5.45065e-05 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_net1_x1_1 1.8
int_net2_x1_2 0
int_out_x1_3 6.80528e-09
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.1522e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch -4.84676e-27
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 4.57125e-05
vmeas_current_vdd#branch 4.57125e-05
v2#branch -4.57126e-05
x1:vctrl#branch 0
x1:out#branch 4.84676e-27
x1:vss#branch 4.57125e-05
x1:vdd#branch -4.57125e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 1.39922e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 2.10555e-05 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 2.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.140470e-06 at= 1.001500e-08
vlow_outside_while = -1.128042e-06 at= 1.000500e-08
peak_to_peak_outside_while= 2.26851e-06
supply_current_rms = 5.35560e-05 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_net1_x1_1 1.8
int_net2_x1_2 0
int_out_x1_3 6.80528e-09
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.1522e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch -4.84676e-27
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 4.57125e-05
vmeas_current_vdd#branch 4.57125e-05
v2#branch -4.57126e-05
x1:vctrl#branch 0
x1:out#branch 4.84676e-27
x1:vss#branch 4.57125e-05
x1:vdd#branch -4.57125e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 2.39965e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 4.07788e-05 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 3.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 3.376966e-06 at= 1.000500e-08
vlow_outside_while = -3.356315e-06 at= 1.001500e-08
peak_to_peak_outside_while= 6.73328e-06
supply_current_rms = 5.66274e-05 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_net1_x1_1 1.8
int_net2_x1_2 0
int_out_x1_3 6.80528e-09
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.1522e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch -4.84676e-27
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 4.57125e-05
vmeas_current_vdd#branch 4.57125e-05
v2#branch -4.57126e-05
x1:vctrl#branch 0
x1:out#branch 4.84676e-27
x1:vss#branch 4.57125e-05
x1:vdd#branch -4.57125e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 2.19121e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 2.27630e-05 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 4.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 2.056711e-06 at= 1.000500e-08
vlow_outside_while = -2.040387e-06 at= 1.001500e-08
peak_to_peak_outside_while= 4.09710e-06
supply_current_rms = 5.59314e-05 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_net1_x1_1 1.8
int_net2_x1_2 0
int_out_x1_3 6.80528e-09
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.1522e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch -4.84676e-27
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 4.57125e-05
vmeas_current_vdd#branch 4.57125e-05
v2#branch -4.57126e-05
x1:vctrl#branch 0
x1:out#branch 4.84676e-27
x1:vss#branch 4.57125e-05
x1:vdd#branch -4.57125e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 9.46547e-05 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 8.02524e-05 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 5.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 2.251210e-01 at= 1.588500e-08
vlow_outside_while = -5.922048e-02 at= 1.583500e-08
peak_to_peak_outside_while= 2.84342e-01
supply_current_rms = 1.16729e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_net1_x1_1 1.8
int_net2_x1_2 0
int_out_x1_3 6.80528e-09
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.1522e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch -4.84676e-27
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 4.57125e-05
vmeas_current_vdd#branch 4.57125e-05
v2#branch -4.57126e-05
x1:vctrl#branch 0
x1:out#branch 4.84676e-27
x1:vss#branch 4.57125e-05
x1:vdd#branch -4.57125e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
Error: measure tvco_outside_while (TRIG) : out of interval
.meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed!
Original line no.: 0, new internal line no.: 12503:
Undefined number [tvco_outside_while]
Original line no.: 0, new internal line no.: 12503:
Cannot compute substitute
fvco_outside_while = failed
supply_current_rms_outside_while= 1.45479e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 9.18971e-05 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 6.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.928503e+00 at= 1.100500e-08
vlow_outside_while = -8.134060e-02 at= 1.005500e-08
peak_to_peak_outside_while= 2.00984e+00
supply_current_rms = 1.53182e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_net1_x1_1 1.8
int_net2_x1_2 0
int_out_x1_3 6.80528e-09
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.1522e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch -4.84676e-27
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 4.57125e-05
vmeas_current_vdd#branch 4.57125e-05
v2#branch -4.57126e-05
x1:vctrl#branch 0
x1:out#branch 4.84676e-27
x1:vss#branch 4.57125e-05
x1:vdd#branch -4.57125e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 4.252541e-10 targ= 2.180345e-08 trig= 2.137819e-08
fvco_outside_while = 2.35154e+09
supply_current_rms_outside_while= 2.95837e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 3.02020e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 7.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.929857e+00 at= 1.144500e-08
vlow_outside_while = -7.714702e-02 at= 1.497500e-08
peak_to_peak_outside_while= 2.00700e+00
supply_current_rms = 2.94130e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_net1_x1_1 1.8
int_net2_x1_2 0
int_out_x1_3 6.80528e-09
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.1522e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch -4.84676e-27
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 4.57125e-05
vmeas_current_vdd#branch 4.57125e-05
v2#branch -4.57126e-05
x1:vctrl#branch 0
x1:out#branch 4.84676e-27
x1:vss#branch 4.57125e-05
x1:vdd#branch -4.57125e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.796168e-10 targ= 1.552873e-08 trig= 1.524911e-08
fvco_outside_while = 3.57632e+09
supply_current_rms_outside_while= 5.42020e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 4.23725e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 8.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.927602e+00 at= 1.759500e-08
vlow_outside_while = -8.337864e-02 at= 1.522500e-08
peak_to_peak_outside_while= 2.01098e+00
supply_current_rms = 5.24338e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_net1_x1_1 1.8
int_net2_x1_2 0
int_out_x1_3 6.80528e-09
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.1522e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch -4.84676e-27
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 4.57125e-05
vmeas_current_vdd#branch 4.57125e-05
v2#branch -4.57126e-05
x1:vctrl#branch 0
x1:out#branch 4.84676e-27
x1:vss#branch 4.57125e-05
x1:vdd#branch -4.57125e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.575129e-10 targ= 1.447668e-08 trig= 1.421917e-08
fvco_outside_while = 3.88330e+09
supply_current_rms_outside_while= 4.59497e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 4.57237e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 9.000000e-01 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.922230e+00 at= 1.173500e-08
vlow_outside_while = -8.340872e-02 at= 1.419500e-08
peak_to_peak_outside_while= 2.00564e+00
supply_current_rms = 4.54144e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_net1_x1_1 1.8
int_net2_x1_2 0
int_out_x1_3 6.80528e-09
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.1522e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch -4.84676e-27
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 4.57125e-05
vmeas_current_vdd#branch 4.57125e-05
v2#branch -4.57126e-05
x1:vctrl#branch 0
x1:out#branch 4.84676e-27
x1:vss#branch 4.57125e-05
x1:vdd#branch -4.57125e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.511065e-10 targ= 1.419816e-08 trig= 1.394705e-08
fvco_outside_while = 3.98237e+09
supply_current_rms_outside_while= 4.83419e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 4.84369e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.000000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.917886e+00 at= 1.930500e-08
vlow_outside_while = -8.361652e-02 at= 1.065500e-08
peak_to_peak_outside_while= 2.00150e+00
supply_current_rms = 4.78015e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_net1_x1_1 1.8
int_net2_x1_2 0
int_out_x1_3 6.80528e-09
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.1522e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch -4.84676e-27
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 4.57125e-05
vmeas_current_vdd#branch 4.57125e-05
v2#branch -4.57126e-05
x1:vctrl#branch 0
x1:out#branch 4.84676e-27
x1:vss#branch 4.57125e-05
x1:vdd#branch -4.57125e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.487839e-10 targ= 1.407491e-08 trig= 1.382613e-08
fvco_outside_while = 4.01955e+09
supply_current_rms_outside_while= 5.09968e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.10737e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.100000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.914849e+00 at= 1.340500e-08
vlow_outside_while = -8.372164e-02 at= 1.504500e-08
peak_to_peak_outside_while= 1.99857e+00
supply_current_rms = 5.03768e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_net1_x1_1 1.8
int_net2_x1_2 0
int_out_x1_3 6.80528e-09
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.1522e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch -4.84676e-27
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 4.57125e-05
vmeas_current_vdd#branch 4.57125e-05
v2#branch -4.57126e-05
x1:vctrl#branch 0
x1:out#branch 4.84676e-27
x1:vss#branch 4.57125e-05
x1:vdd#branch -4.57125e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.472385e-10 targ= 1.401300e-08 trig= 1.376576e-08
fvco_outside_while = 4.04468e+09
supply_current_rms_outside_while= 5.30730e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.31701e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.200000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.912884e+00 at= 1.532500e-08
vlow_outside_while = -8.375353e-02 at= 1.522500e-08
peak_to_peak_outside_while= 1.99664e+00
supply_current_rms = 5.24026e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_net1_x1_1 1.8
int_net2_x1_2 0
int_out_x1_3 6.80528e-09
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.1522e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch -4.84676e-27
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 4.57125e-05
vmeas_current_vdd#branch 4.57125e-05
v2#branch -4.57126e-05
x1:vctrl#branch 0
x1:out#branch 4.84676e-27
x1:vss#branch 4.57125e-05
x1:vdd#branch -4.57125e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.465702e-10 targ= 1.398249e-08 trig= 1.373592e-08
fvco_outside_while = 4.05564e+09
supply_current_rms_outside_while= 5.41381e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.42430e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.300000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.911980e+00 at= 1.726500e-08
vlow_outside_while = -8.375336e-02 at= 1.568500e-08
peak_to_peak_outside_while= 1.99573e+00
supply_current_rms = 5.34732e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_net1_x1_1 1.8
int_net2_x1_2 0
int_out_x1_3 6.80528e-09
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.1522e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch -4.84676e-27
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 4.57125e-05
vmeas_current_vdd#branch 4.57125e-05
v2#branch -4.57126e-05
x1:vctrl#branch 0
x1:out#branch 4.84676e-27
x1:vss#branch 4.57125e-05
x1:vdd#branch -4.57125e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.465469e-10 targ= 1.396429e-08 trig= 1.371775e-08
fvco_outside_while = 4.05602e+09
supply_current_rms_outside_while= 5.47868e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.49278e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.400000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.911503e+00 at= 1.699500e-08
vlow_outside_while = -8.373515e-02 at= 1.763500e-08
peak_to_peak_outside_while= 1.99524e+00
supply_current_rms = 5.41205e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_net1_x1_1 1.8
int_net2_x1_2 0
int_out_x1_3 6.80528e-09
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.1522e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch -4.84676e-27
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 4.57125e-05
vmeas_current_vdd#branch 4.57125e-05
v2#branch -4.57126e-05
x1:vctrl#branch 0
x1:out#branch 4.84676e-27
x1:vss#branch 4.57125e-05
x1:vdd#branch -4.57125e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.458357e-10 targ= 1.395152e-08 trig= 1.370569e-08
fvco_outside_while = 4.06776e+09
supply_current_rms_outside_while= 5.52205e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.53673e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.500000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.911202e+00 at= 1.279500e-08
vlow_outside_while = -8.371560e-02 at= 1.466500e-08
peak_to_peak_outside_while= 1.99492e+00
supply_current_rms = 5.45623e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_net1_x1_1 1.8
int_net2_x1_2 0
int_out_x1_3 6.80528e-09
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.1522e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch -4.84676e-27
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 4.57125e-05
vmeas_current_vdd#branch 4.57125e-05
v2#branch -4.57126e-05
x1:vctrl#branch 0
x1:out#branch 4.84676e-27
x1:vss#branch 4.57125e-05
x1:vdd#branch -4.57125e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.458044e-10 targ= 1.394250e-08 trig= 1.369670e-08
fvco_outside_while = 4.06828e+09
supply_current_rms_outside_while= 5.55577e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.57042e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.600000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.910996e+00 at= 1.106500e-08
vlow_outside_while = -8.370287e-02 at= 1.588500e-08
peak_to_peak_outside_while= 1.99470e+00
supply_current_rms = 5.48888e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_net1_x1_1 1.8
int_net2_x1_2 0
int_out_x1_3 6.80528e-09
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.1522e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch -4.84676e-27
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 4.57125e-05
vmeas_current_vdd#branch 4.57125e-05
v2#branch -4.57126e-05
x1:vctrl#branch 0
x1:out#branch 4.84676e-27
x1:vss#branch 4.57125e-05
x1:vdd#branch -4.57125e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.461096e-10 targ= 1.393586e-08 trig= 1.368975e-08
fvco_outside_while = 4.06323e+09
supply_current_rms_outside_while= 5.58282e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.59597e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.700000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.910831e+00 at= 1.425500e-08
vlow_outside_while = -8.368798e-02 at= 1.833500e-08
peak_to_peak_outside_while= 1.99452e+00
supply_current_rms = 5.51521e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch
option SCALE: Scale is set to 1e-06 for instance and model parameters
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Initial Transient Solution
--------------------------
Node Voltage
---- -------
int_net1_x1_1 1.8
int_net2_x1_2 0
int_out_x1_3 6.80528e-09
int_vctrl_x1_4 0
net1 1.8
net2 0
out 6.80528e-09
vctrl 0
vdd 1.8
int_vdd_x2_1 1.8
int_out_x2_2 6.80528e-09
int_gnd_x2_3 0
int_gnd_x3_2 0
int_out_x3_1 6.80528e-09
int_gnd_x3_3 0
int_buf1_out_x3_6 2.60627e-09
int_vdd_x3_5 1.8
int_vdd_x3_4 1.8
buf1_out 2.60627e-09
int_buf1_out_x4_1 2.60627e-09
int_vdd_x4_5 1.8
int_vdd_x4_4 1.8
int_gnd_x4_2 0
int_gnd_x4_3 0
int_net4_x4_6 4.9501e-09
net4 4.9501e-09
int_vdd_x5_5 1.8
int_net5_x5_6 4.9501e-09
int_vdd_x5_4 1.8
int_net4_x5_1 4.9501e-09
int_gnd_x5_2 0
int_gnd_x5_3 0
net5 4.9501e-09
int_net3_x6_6 4.9501e-09
int_gnd_x6_2 0
int_gnd_x6_3 0
int_net5_x6_1 4.9501e-09
int_vdd_x6_5 1.8
int_vdd_x6_4 1.8
net3 4.9501e-09
int_vdd_x7_5 1.8
int_buf16_out_x7_6 4.9501e-09
int_vdd_x7_4 1.8
int_gnd_x7_2 0
int_gnd_x7_3 0
int_net3_x7_1 4.9501e-09
buf16_out 4.9501e-09
v1#branch 0
x7:x#branch 0
x7:vpwr#branch -8.17036e-12
x7:vpb#branch -4.1522e-11
x7:vnb#branch 7.2401e-12
x7:vgnd#branch 4.24513e-11
x7:a#branch 0
x6:x#branch 0
x6:vpwr#branch -4.08518e-12
x6:vpb#branch -2.07608e-11
x6:vnb#branch 3.62005e-12
x6:vgnd#branch 2.12257e-11
x6:a#branch 0
x5:x#branch 0
x5:vpwr#branch -2.04259e-12
x5:vpb#branch -1.03803e-11
x5:vnb#branch 1.81003e-12
x5:vgnd#branch 1.06128e-11
x5:a#branch 0
x4:x#branch 0
x4:vpwr#branch -1.9439e-12
x4:vpb#branch -5.1902e-12
x4:vnb#branch 1.81003e-12
x4:vgnd#branch 5.32401e-12
x4:a#branch 0
x3:x#branch 0
x3:vpwr#branch -2.01847e-12
x3:vpb#branch -1.80997e-12
x3:vnb#branch 1.81009e-12
x3:vgnd#branch 2.01837e-12
x3:a#branch 0
x2:vss#branch 0
x2:clk#branch -4.84676e-27
x2:vdd#branch 4.96131e-15
vmeas_current_gnd#branch 4.57125e-05
vmeas_current_vdd#branch 4.57125e-05
v2#branch -4.57126e-05
x1:vctrl#branch 0
x1:out#branch 4.84676e-27
x1:vss#branch 4.57125e-05
x1:vdd#branch -4.57125e-05
No. of Data Rows : 7020
Measurements for Transient Analysis
tvco_outside_while = 2.453048e-10 targ= 1.393020e-08 trig= 1.368490e-08
fvco_outside_while = 4.07656e+09
supply_current_rms_outside_while= 5.60259e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.61536e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.910717e+00 at= 1.621500e-08
vlow_outside_while = -8.367983e-02 at= 1.562500e-08
peak_to_peak_outside_while= 1.99440e+00
supply_current_rms = 5.53405e-04 from= 0.00000e+00 to= 7.00000e-08
binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw"
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: v1: no DC value, transient time 0 value used
Measurements for Transient Analysis
tvco_outside_while = 2.453048e-10 targ= 1.393020e-08 trig= 1.368490e-08
Original line no.: 0, new internal line no.: 12503:
insertnumber: fails.
s = ".meas tran fvco_outside_while param= 4.076560964643878e+09 " u=" 4.076560964643878e+09 " id=0
fvco_outside_while = 4.07656e+09
supply_current_rms_outside_while= 5.60259e-04 from= 1.00000e-08 to= 4.00000e-08
ground_current_rms_outside_while= 5.61536e-04 from= 1.00000e-08 to= 4.00000e-08
vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08
vhigh_outside_while = 1.910717e+00 at= 1.621500e-08
vlow_outside_while = -8.367983e-02 at= 1.562500e-08
Original line no.: 0, new internal line no.: 12509:
insertnumber: fails.
s = ".meas tran peak_to_peak_outside_while param= 1.994396963740868e+00 " u=" 1.994396963740868e+00 " id=0
peak_to_peak_outside_while= 1.99440e+00
supply_current_rms = 5.53405e-04 from= 0.00000e+00 to= 7.00000e-08
Total analysis time (seconds) = 9.0219
Total CPU time (seconds) = 175.509
Total DRAM available = 7955.125 MB.
DRAM currently available = 120.273 MB.
Maximum ngspice program size = 684.711 MB.
Current ngspice program size = 665.734 MB.
Shared ngspice pages = 8.738 MB.
Text (code) pages = 7.879 MB.
Stack = 0 bytes.
Library pages = 657.230 MB.