| |
| Compatibility modes selected: hs a |
| |
| Warning: m=xx on .subckt line will override multiplier m hierarchy! |
| |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net5 1.8 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 3.41112e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.26658e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 0.000000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.926124e+00 at= 1.087500e-08 |
| vlow_outside_while = -8.146002e-02 at= 1.072500e-08 |
| peak_to_peak_outside_while= 2.00758e+00 |
| supply_current_rms = 5.54515e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net5 1.8 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 4.91331e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 1.58677e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 3.405164e-06 at= 1.000500e-08 |
| vlow_outside_while = -3.364600e-06 at= 1.001500e-08 |
| peak_to_peak_outside_while= 6.76976e-06 |
| supply_current_rms = 6.73300e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net5 1.8 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 1.50853e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.61998e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 2.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.365017e-05 at= 1.000500e-08 |
| vlow_outside_while = -1.361321e-05 at= 1.001500e-08 |
| peak_to_peak_outside_while= 2.72634e-05 |
| supply_current_rms = 5.18212e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net5 1.8 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 4.44954e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.10402e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 3.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.149947e-05 at= 1.050500e-08 |
| vlow_outside_while = -1.148452e-05 at= 1.051500e-08 |
| peak_to_peak_outside_while= 2.29840e-05 |
| supply_current_rms = 6.41630e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net5 1.8 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 9.85946e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 2.42277e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 4.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 9.979112e-06 at= 1.176500e-08 |
| vlow_outside_while = -9.254459e-06 at= 1.115500e-08 |
| peak_to_peak_outside_while= 1.92336e-05 |
| supply_current_rms = 1.03380e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net5 1.8 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 9.12357e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 7.38040e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 5.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.927195e+00 at= 1.102500e-08 |
| vlow_outside_while = -8.209564e-02 at= 1.086500e-08 |
| peak_to_peak_outside_while= 2.00929e+00 |
| supply_current_rms = 1.01895e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net5 1.8 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 3.26686e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 1.54276e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 6.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.927504e+00 at= 1.292500e-08 |
| vlow_outside_while = -7.986223e-02 at= 1.011500e-08 |
| peak_to_peak_outside_while= 2.00737e+00 |
| supply_current_rms = 2.78701e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net5 1.8 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 3.875399e-10 targ= 2.310807e-08 trig= 2.272053e-08 |
| fvco_outside_while = 2.58038e+09 |
| supply_current_rms_outside_while= 2.98478e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.03765e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 7.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.928845e+00 at= 1.014500e-08 |
| vlow_outside_while = -7.366888e-02 at= 1.843500e-08 |
| peak_to_peak_outside_while= 2.00251e+00 |
| supply_current_rms = 2.90760e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net5 1.8 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.710748e-10 targ= 1.642394e-08 trig= 1.615286e-08 |
| fvco_outside_while = 3.68902e+09 |
| supply_current_rms_outside_while= 4.26644e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.27182e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 8.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.925582e+00 at= 1.029500e-08 |
| vlow_outside_while = -8.005204e-02 at= 1.260500e-08 |
| peak_to_peak_outside_while= 2.00563e+00 |
| supply_current_rms = 4.17486e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net5 1.8 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.532283e-10 targ= 1.494354e-08 trig= 1.469031e-08 |
| fvco_outside_while = 3.94901e+09 |
| supply_current_rms_outside_while= 4.63559e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.59998e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 9.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.918177e+00 at= 1.224500e-08 |
| vlow_outside_while = -8.106337e-02 at= 1.112500e-08 |
| peak_to_peak_outside_while= 1.99924e+00 |
| supply_current_rms = 4.55163e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net5 1.8 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.474412e-10 targ= 1.457409e-08 trig= 1.432665e-08 |
| fvco_outside_while = 4.04136e+09 |
| supply_current_rms_outside_while= 4.85510e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.85989e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.000000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.910882e+00 at= 1.118500e-08 |
| vlow_outside_while = -8.149412e-02 at= 1.875500e-08 |
| peak_to_peak_outside_while= 1.99238e+00 |
| supply_current_rms = 4.77979e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net5 1.8 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.448005e-10 targ= 1.439228e-08 trig= 1.414748e-08 |
| fvco_outside_while = 4.08496e+09 |
| supply_current_rms_outside_while= 5.10367e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.11429e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.100000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.903555e+00 at= 1.103500e-08 |
| vlow_outside_while = -8.169848e-02 at= 1.926500e-08 |
| peak_to_peak_outside_while= 1.98525e+00 |
| supply_current_rms = 5.02605e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net5 1.8 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.434474e-10 targ= 1.429111e-08 trig= 1.404766e-08 |
| fvco_outside_while = 4.10766e+09 |
| supply_current_rms_outside_while= 5.30029e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.32505e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.200000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.898660e+00 at= 1.265500e-08 |
| vlow_outside_while = -8.175048e-02 at= 1.158500e-08 |
| peak_to_peak_outside_while= 1.98041e+00 |
| supply_current_rms = 5.21818e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net5 1.8 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.431595e-10 targ= 1.423302e-08 trig= 1.398986e-08 |
| fvco_outside_while = 4.11253e+09 |
| supply_current_rms_outside_while= 5.40731e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.43543e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.300000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.896470e+00 at= 1.697500e-08 |
| vlow_outside_while = -8.173207e-02 at= 1.323500e-08 |
| peak_to_peak_outside_while= 1.97820e+00 |
| supply_current_rms = 5.32486e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net5 1.8 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.430599e-10 targ= 1.419495e-08 trig= 1.395189e-08 |
| fvco_outside_while = 4.11421e+09 |
| supply_current_rms_outside_while= 5.47350e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.50000e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.400000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.895278e+00 at= 1.353500e-08 |
| vlow_outside_while = -8.172142e-02 at= 1.659500e-08 |
| peak_to_peak_outside_while= 1.97700e+00 |
| supply_current_rms = 5.39058e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net5 1.8 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.422177e-10 targ= 1.416753e-08 trig= 1.392531e-08 |
| fvco_outside_while = 4.12852e+09 |
| supply_current_rms_outside_while= 5.52316e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.53607e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.500000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.894516e+00 at= 1.520500e-08 |
| vlow_outside_while = -8.170435e-02 at= 1.656500e-08 |
| peak_to_peak_outside_while= 1.97622e+00 |
| supply_current_rms = 5.43861e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net5 1.8 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.420747e-10 targ= 1.414711e-08 trig= 1.390504e-08 |
| fvco_outside_while = 4.13096e+09 |
| supply_current_rms_outside_while= 5.55415e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.56689e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.600000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.893995e+00 at= 1.760500e-08 |
| vlow_outside_while = -8.168997e-02 at= 1.678500e-08 |
| peak_to_peak_outside_while= 1.97568e+00 |
| supply_current_rms = 5.47271e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net5 1.8 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.419174e-10 targ= 1.413087e-08 trig= 1.388895e-08 |
| fvco_outside_while = 4.13364e+09 |
| supply_current_rms_outside_while= 5.57941e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.59083e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.700000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.893622e+00 at= 1.734500e-08 |
| vlow_outside_while = -8.168715e-02 at= 1.410500e-08 |
| peak_to_peak_outside_while= 1.97531e+00 |
| supply_current_rms = 5.49807e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.6571 |
| vctrl 0 |
| x1.net8 0.966293 |
| x1.ng3 3.93259e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 2.69671e-09 |
| sel3 1.8 |
| x1.net3 0.966293 |
| x1.net5 1.8 |
| x1.net2 1.79523 |
| x1.net4 0.0839479 |
| x1.pg3 1.6571 |
| x1.pg0 1.6571 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.6571 |
| x1.pg2 1.6571 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 2.69671e-09 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.44058e-11 |
| vmeas_current_gnd#branch 1.2222e-05 |
| vmeas_current_vdd#branch 1.2222e-05 |
| v2#branch -1.22221e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.417053e-10 targ= 1.411835e-08 trig= 1.387665e-08 |
| fvco_outside_while = 4.13727e+09 |
| supply_current_rms_outside_while= 5.60052e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.62218e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.893334e+00 at= 1.660500e-08 |
| vlow_outside_while = -8.167676e-02 at= 1.820500e-08 |
| peak_to_peak_outside_while= 1.97501e+00 |
| supply_current_rms = 5.51873e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.417053e-10 targ= 1.411835e-08 trig= 1.387665e-08 |
| Original line no.: 0, new internal line no.: 12460: |
| insertnumber: fails. |
| s = ".meas tran fvco_outside_while param= 4.137269400697080e+09 " u=" 4.137269400697080e+09 " id=0 |
| fvco_outside_while = 4.13727e+09 |
| supply_current_rms_outside_while= 5.60052e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.62218e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.893334e+00 at= 1.660500e-08 |
| vlow_outside_while = -8.167676e-02 at= 1.820500e-08 |
| Original line no.: 0, new internal line no.: 12466: |
| insertnumber: fails. |
| s = ".meas tran peak_to_peak_outside_while param= 1.975011101634743e+00 " u=" 1.975011101634743e+00 " id=0 |
| peak_to_peak_outside_while= 1.97501e+00 |
| supply_current_rms = 5.51873e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| |
| Total analysis time (seconds) = 11.2864 |
| |
| Total CPU time (seconds) = 204.384 |
| |
| Total DRAM available = 7952.234 MB. |
| DRAM currently available = 127.242 MB. |
| Maximum ngspice program size = 684.824 MB. |
| Current ngspice program size = 666.176 MB. |
| |
| Shared ngspice pages = 9.070 MB. |
| Text (code) pages = 7.879 MB. |
| Stack = 0 bytes. |
| Library pages = 657.340 MB. |
| |
