| |
| Compatibility modes selected: hs a |
| |
| Warning: m=xx on .subckt line will override multiplier m hierarchy! |
| |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 1.05096e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.97556e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 0.000000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 9.257659e-06 at= 1.011500e-08 |
| vlow_outside_while = -9.242708e-06 at= 1.010500e-08 |
| peak_to_peak_outside_while= 1.85004e-05 |
| supply_current_rms = 1.11437e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 6.34844e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 2.93190e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 4.310862e-06 at= 1.148500e-08 |
| vlow_outside_while = -4.296573e-06 at= 1.149500e-08 |
| peak_to_peak_outside_while= 8.60743e-06 |
| supply_current_rms = 7.80736e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 1.74836e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 1.41737e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 2.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.780522e-06 at= 1.001500e-08 |
| vlow_outside_while = -1.775279e-06 at= 1.000500e-08 |
| peak_to_peak_outside_while= 3.55580e-06 |
| supply_current_rms = 5.40982e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 2.02051e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 7.78363e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 3.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.121029e-05 at= 1.000500e-08 |
| vlow_outside_while = -1.118614e-05 at= 1.001500e-08 |
| peak_to_peak_outside_while= 2.23964e-05 |
| supply_current_rms = 5.52344e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 1.43381e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.08902e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 4.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 6.177804e-07 at= 1.466500e-08 |
| vlow_outside_while = -6.040500e-07 at= 1.467500e-08 |
| peak_to_peak_outside_while= 1.22183e-06 |
| supply_current_rms = 5.38192e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 4.39587e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.41191e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 5.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.733434e+00 at= 1.133500e-08 |
| vlow_outside_while = -7.912534e-02 at= 1.125500e-08 |
| peak_to_peak_outside_while= 1.81256e+00 |
| supply_current_rms = 6.94973e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 1.599098e-09 targ= 6.338998e-08 trig= 6.179088e-08 |
| fvco_outside_while = 6.25352e+08 |
| supply_current_rms_outside_while= 2.20695e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 1.44746e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 6.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929077e+00 at= 1.297500e-08 |
| vlow_outside_while = -8.747969e-02 at= 1.331500e-08 |
| peak_to_peak_outside_while= 2.01656e+00 |
| supply_current_rms = 2.73831e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 5.087590e-10 targ= 2.726572e-08 trig= 2.675696e-08 |
| fvco_outside_while = 1.96557e+09 |
| supply_current_rms_outside_while= 2.49251e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 2.64062e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 7.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.930159e+00 at= 1.440500e-08 |
| vlow_outside_while = -7.382856e-02 at= 1.401500e-08 |
| peak_to_peak_outside_while= 2.00399e+00 |
| supply_current_rms = 2.46458e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.940897e-10 targ= 1.701698e-08 trig= 1.672289e-08 |
| fvco_outside_while = 3.40032e+09 |
| supply_current_rms_outside_while= 4.12312e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.01262e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 8.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929062e+00 at= 1.860500e-08 |
| vlow_outside_while = -8.479566e-02 at= 1.875500e-08 |
| peak_to_peak_outside_while= 2.01386e+00 |
| supply_current_rms = 4.03797e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.687029e-10 targ= 1.556958e-08 trig= 1.530088e-08 |
| fvco_outside_while = 3.72158e+09 |
| supply_current_rms_outside_while= 4.49411e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.45485e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 9.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.924993e+00 at= 1.378500e-08 |
| vlow_outside_while = -8.466285e-02 at= 1.930500e-08 |
| peak_to_peak_outside_while= 2.00966e+00 |
| supply_current_rms = 4.42583e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.584359e-10 targ= 1.500809e-08 trig= 1.474966e-08 |
| fvco_outside_while = 3.86943e+09 |
| supply_current_rms_outside_while= 4.83872e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.81254e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.000000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.920795e+00 at= 1.044500e-08 |
| vlow_outside_while = -8.491764e-02 at= 1.756500e-08 |
| peak_to_peak_outside_while= 2.00571e+00 |
| supply_current_rms = 4.76562e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.532518e-10 targ= 1.475130e-08 trig= 1.449805e-08 |
| fvco_outside_while = 3.94864e+09 |
| supply_current_rms_outside_while= 5.11135e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.09966e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.100000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.916657e+00 at= 1.229500e-08 |
| vlow_outside_while = -8.511673e-02 at= 1.041500e-08 |
| peak_to_peak_outside_while= 2.00177e+00 |
| supply_current_rms = 5.03194e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.515579e-10 targ= 1.461447e-08 trig= 1.436291e-08 |
| fvco_outside_while = 3.97523e+09 |
| supply_current_rms_outside_while= 5.30497e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.29268e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.200000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.913597e+00 at= 1.946500e-08 |
| vlow_outside_while = -8.518360e-02 at= 1.383500e-08 |
| peak_to_peak_outside_while= 1.99878e+00 |
| supply_current_rms = 5.22354e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.500098e-10 targ= 1.453852e-08 trig= 1.428851e-08 |
| fvco_outside_while = 3.99984e+09 |
| supply_current_rms_outside_while= 5.41747e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.40603e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.300000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.911785e+00 at= 1.986500e-08 |
| vlow_outside_while = -8.340232e-02 at= 1.976500e-08 |
| peak_to_peak_outside_while= 1.99519e+00 |
| supply_current_rms = 5.33607e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.492970e-10 targ= 1.448940e-08 trig= 1.424010e-08 |
| fvco_outside_while = 4.01128e+09 |
| supply_current_rms_outside_while= 5.48679e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.47449e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.400000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.911639e+00 at= 1.805500e-08 |
| vlow_outside_while = -8.504470e-02 at= 1.022500e-08 |
| peak_to_peak_outside_while= 1.99668e+00 |
| supply_current_rms = 5.40630e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.488344e-10 targ= 1.445444e-08 trig= 1.420561e-08 |
| fvco_outside_while = 4.01874e+09 |
| supply_current_rms_outside_while= 5.53190e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.52535e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.500000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.911213e+00 at= 1.527500e-08 |
| vlow_outside_while = -8.499148e-02 at= 1.517500e-08 |
| peak_to_peak_outside_while= 1.99620e+00 |
| supply_current_rms = 5.45435e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.485325e-10 targ= 1.442796e-08 trig= 1.417942e-08 |
| fvco_outside_while = 4.02362e+09 |
| supply_current_rms_outside_while= 5.56492e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.56239e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.600000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.910903e+00 at= 1.723500e-08 |
| vlow_outside_while = -8.492703e-02 at= 1.713500e-08 |
| peak_to_peak_outside_while= 1.99583e+00 |
| supply_current_rms = 5.48659e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.482718e-10 targ= 1.440790e-08 trig= 1.415963e-08 |
| fvco_outside_while = 4.02784e+09 |
| supply_current_rms_outside_while= 5.59789e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.59351e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.700000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.910636e+00 at= 1.944500e-08 |
| vlow_outside_while = -8.491362e-02 at= 1.264500e-08 |
| peak_to_peak_outside_while= 1.99555e+00 |
| supply_current_rms = 5.51502e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.478008e-10 targ= 1.439156e-08 trig= 1.414376e-08 |
| fvco_outside_while = 4.03550e+09 |
| supply_current_rms_outside_while= 5.62194e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.61251e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.910490e+00 at= 1.694500e-08 |
| vlow_outside_while = -8.489914e-02 at= 1.932500e-08 |
| peak_to_peak_outside_while= 1.99539e+00 |
| supply_current_rms = 5.53942e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.478008e-10 targ= 1.439156e-08 trig= 1.414376e-08 |
| Original line no.: 0, new internal line no.: 12460: |
| insertnumber: fails. |
| s = ".meas tran fvco_outside_while param= 4.035499510064193e+09 " u=" 4.035499510064193e+09 " id=0 |
| fvco_outside_while = 4.03550e+09 |
| supply_current_rms_outside_while= 5.62194e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.61251e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.910490e+00 at= 1.694500e-08 |
| vlow_outside_while = -8.489914e-02 at= 1.932500e-08 |
| Original line no.: 0, new internal line no.: 12466: |
| insertnumber: fails. |
| s = ".meas tran peak_to_peak_outside_while param= 1.995388736917344e+00 " u=" 1.995388736917344e+00 " id=0 |
| peak_to_peak_outside_while= 1.99539e+00 |
| supply_current_rms = 5.53942e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| |
| Total analysis time (seconds) = 15.0595 |
| |
| Total CPU time (seconds) = 303.944 |
| |
| Total DRAM available = 7952.234 MB. |
| DRAM currently available = 4552.332 MB. |
| Maximum ngspice program size = 684.801 MB. |
| Current ngspice program size = 665.574 MB. |
| |
| Shared ngspice pages = 8.488 MB. |
| Text (code) pages = 7.879 MB. |
| Stack = 0 bytes. |
| Library pages = 657.316 MB. |
| |
