| |
| Compatibility modes selected: hs a |
| |
| Warning: m=xx on .subckt line will override multiplier m hierarchy! |
| |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net5 1.8 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 4.04634e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.44770e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 0.000000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 6.017106e-06 at= 1.194500e-08 |
| vlow_outside_while = -5.410462e-06 at= 1.099500e-08 |
| peak_to_peak_outside_while= 1.14276e-05 |
| supply_current_rms = 6.25872e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net5 1.8 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 1.57226e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 2.51039e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 3.009703e-06 at= 1.000500e-08 |
| vlow_outside_while = -2.219146e-06 at= 1.001500e-08 |
| peak_to_peak_outside_while= 5.22885e-06 |
| supply_current_rms = 5.36892e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net5 1.8 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 1.60060e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 2.19535e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 2.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.954152e-06 at= 1.153500e-08 |
| vlow_outside_while = -1.677610e-06 at= 1.080500e-08 |
| peak_to_peak_outside_while= 3.63176e-06 |
| supply_current_rms = 5.29154e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net5 1.8 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 3.35176e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.20154e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 3.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.472920e-05 at= 1.001500e-08 |
| vlow_outside_while = -1.472254e-05 at= 1.000500e-08 |
| peak_to_peak_outside_while= 2.94517e-05 |
| supply_current_rms = 5.96312e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net5 1.8 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 1.43326e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.00414e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 4.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 2.265351e-06 at= 1.000500e-08 |
| vlow_outside_while = -2.238907e-06 at= 1.001500e-08 |
| peak_to_peak_outside_while= 4.50426e-06 |
| supply_current_rms = 5.35174e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net5 1.8 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 3.93489e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.54095e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 5.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.834946e+00 at= 1.132500e-08 |
| vlow_outside_while = -7.450899e-02 at= 1.123500e-08 |
| peak_to_peak_outside_while= 1.90945e+00 |
| supply_current_rms = 6.56019e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net5 1.8 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 1.598954e-09 targ= 6.333837e-08 trig= 6.173942e-08 |
| fvco_outside_while = 6.25409e+08 |
| supply_current_rms_outside_while= 1.48989e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 1.56236e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 6.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.927695e+00 at= 1.105500e-08 |
| vlow_outside_while = -8.347376e-02 at= 1.329500e-08 |
| peak_to_peak_outside_while= 2.01117e+00 |
| supply_current_rms = 1.60211e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net5 1.8 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 5.081865e-10 targ= 2.724422e-08 trig= 2.673603e-08 |
| fvco_outside_while = 1.96778e+09 |
| supply_current_rms_outside_while= 2.56493e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 2.53037e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 7.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.928334e+00 at= 1.744500e-08 |
| vlow_outside_while = -7.095087e-02 at= 1.959500e-08 |
| peak_to_peak_outside_while= 1.99928e+00 |
| supply_current_rms = 2.52753e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net5 1.8 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.929823e-10 targ= 1.727859e-08 trig= 1.698560e-08 |
| fvco_outside_while = 3.41318e+09 |
| supply_current_rms_outside_while= 4.06648e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.99109e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 8.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.927557e+00 at= 1.065500e-08 |
| vlow_outside_while = -8.108597e-02 at= 1.021500e-08 |
| peak_to_peak_outside_while= 2.00864e+00 |
| supply_current_rms = 3.95524e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net5 1.8 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.680603e-10 targ= 1.553938e-08 trig= 1.527132e-08 |
| fvco_outside_while = 3.73050e+09 |
| supply_current_rms_outside_while= 4.46878e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.44392e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 9.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.924316e+00 at= 1.885500e-08 |
| vlow_outside_while = -8.076857e-02 at= 1.685500e-08 |
| peak_to_peak_outside_while= 2.00508e+00 |
| supply_current_rms = 4.39640e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net5 1.8 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.577627e-10 targ= 1.497831e-08 trig= 1.472055e-08 |
| fvco_outside_while = 3.87954e+09 |
| supply_current_rms_outside_while= 4.85098e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.78572e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.000000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.921209e+00 at= 1.867500e-08 |
| vlow_outside_while = -8.080743e-02 at= 1.701500e-08 |
| peak_to_peak_outside_while= 2.00202e+00 |
| supply_current_rms = 4.76899e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net5 1.8 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.531519e-10 targ= 1.472205e-08 trig= 1.446890e-08 |
| fvco_outside_while = 3.95020e+09 |
| supply_current_rms_outside_while= 5.08961e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.08642e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.100000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.918571e+00 at= 1.885500e-08 |
| vlow_outside_while = -8.096490e-02 at= 1.368500e-08 |
| peak_to_peak_outside_while= 1.99954e+00 |
| supply_current_rms = 5.01370e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net5 1.8 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.506674e-10 targ= 1.458559e-08 trig= 1.433492e-08 |
| fvco_outside_while = 3.98935e+09 |
| supply_current_rms_outside_while= 5.31669e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.30349e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.200000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.916730e+00 at= 1.065500e-08 |
| vlow_outside_while = -8.097731e-02 at= 1.982500e-08 |
| peak_to_peak_outside_while= 1.99771e+00 |
| supply_current_rms = 5.23562e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net5 1.8 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.496224e-10 targ= 1.451017e-08 trig= 1.426055e-08 |
| fvco_outside_while = 4.00605e+09 |
| supply_current_rms_outside_while= 5.42816e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.41885e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.300000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.915927e+00 at= 1.159500e-08 |
| vlow_outside_while = -8.090664e-02 at= 1.473500e-08 |
| peak_to_peak_outside_while= 1.99683e+00 |
| supply_current_rms = 5.34298e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net5 1.8 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.488677e-10 targ= 1.446017e-08 trig= 1.421131e-08 |
| fvco_outside_while = 4.01820e+09 |
| supply_current_rms_outside_while= 5.49922e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.49055e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.400000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.915534e+00 at= 1.553500e-08 |
| vlow_outside_while = -8.085732e-02 at= 1.866500e-08 |
| peak_to_peak_outside_while= 1.99639e+00 |
| supply_current_rms = 5.42046e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net5 1.8 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.483981e-10 targ= 1.442529e-08 trig= 1.417689e-08 |
| fvco_outside_while = 4.02580e+09 |
| supply_current_rms_outside_while= 5.54750e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.53994e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.500000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.915297e+00 at= 1.003500e-08 |
| vlow_outside_while = -8.081654e-02 at= 1.514500e-08 |
| peak_to_peak_outside_while= 1.99611e+00 |
| supply_current_rms = 5.46577e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net5 1.8 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.479967e-10 targ= 1.439880e-08 trig= 1.415080e-08 |
| fvco_outside_while = 4.03231e+09 |
| supply_current_rms_outside_while= 5.58209e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.57453e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.600000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.915156e+00 at= 1.720500e-08 |
| vlow_outside_while = -8.077581e-02 at= 1.660500e-08 |
| peak_to_peak_outside_while= 1.99593e+00 |
| supply_current_rms = 5.50009e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net5 1.8 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.477164e-10 targ= 1.437868e-08 trig= 1.413096e-08 |
| fvco_outside_while = 4.03687e+09 |
| supply_current_rms_outside_while= 5.60611e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.60169e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.700000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.915026e+00 at= 1.049500e-08 |
| vlow_outside_while = -8.074174e-02 at= 1.633500e-08 |
| peak_to_peak_outside_while= 1.99577e+00 |
| supply_current_rms = 5.52413e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.16209e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66135 |
| vctrl 0 |
| x1.net8 0.952127 |
| x1.ng3 9.63187e-09 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 3.93259e-09 |
| x1.vco_switch_n_v2_2/selb 2.69671e-09 |
| sel2 1.8 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.952128 |
| x1.net5 1.8 |
| x1.net2 1.7937 |
| x1.net4 0.102646 |
| x1.pg3 1.8 |
| x1.pg0 1.66135 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66135 |
| x1.pg2 1.66135 |
| x1.vco_switch_p_2/selb 2.69671e-09 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.52147e-11 |
| vmeas_current_gnd#branch 1.30191e-05 |
| vmeas_current_vdd#branch 1.30191e-05 |
| v2#branch -1.30192e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.471562e-10 targ= 1.436251e-08 trig= 1.411536e-08 |
| fvco_outside_while = 4.04602e+09 |
| supply_current_rms_outside_while= 5.63255e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.62655e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.914946e+00 at= 1.889500e-08 |
| vlow_outside_while = -8.073068e-02 at= 1.458500e-08 |
| peak_to_peak_outside_while= 1.99568e+00 |
| supply_current_rms = 5.54831e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.471562e-10 targ= 1.436251e-08 trig= 1.411536e-08 |
| Original line no.: 0, new internal line no.: 12460: |
| insertnumber: fails. |
| s = ".meas tran fvco_outside_while param= 4.046023549291243e+09 " u=" 4.046023549291243e+09 " id=0 |
| fvco_outside_while = 4.04602e+09 |
| supply_current_rms_outside_while= 5.63255e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.62655e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.914946e+00 at= 1.889500e-08 |
| vlow_outside_while = -8.073068e-02 at= 1.458500e-08 |
| Original line no.: 0, new internal line no.: 12466: |
| insertnumber: fails. |
| s = ".meas tran peak_to_peak_outside_while param= 1.995676315181723e+00 " u=" 1.995676315181723e+00 " id=0 |
| peak_to_peak_outside_while= 1.99568e+00 |
| supply_current_rms = 5.54831e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| |
| Total analysis time (seconds) = 15.161 |
| |
| Total CPU time (seconds) = 281.199 |
| |
| Total DRAM available = 7952.234 MB. |
| DRAM currently available = 4233.176 MB. |
| Maximum ngspice program size = 684.824 MB. |
| Current ngspice program size = 667.395 MB. |
| |
| Shared ngspice pages = 10.223 MB. |
| Text (code) pages = 7.879 MB. |
| Stack = 0 bytes. |
| Library pages = 657.340 MB. |
| |
