| |
| Compatibility modes selected: hs a |
| |
| Warning: m=xx on .subckt line will override multiplier m hierarchy! |
| |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66618 |
| vctrl 0 |
| x1.net8 0.938142 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.938142 |
| x1.net2 1.79219 |
| x1.net4 0.130516 |
| x1.pg3 1.8 |
| x1.pg0 1.66618 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66618 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.60237e-11 |
| vmeas_current_gnd#branch 1.37538e-05 |
| vmeas_current_vdd#branch 1.37538e-05 |
| v2#branch -1.37539e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 4.44520e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.78335e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 0.000000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 5.760322e-06 at= 1.001500e-08 |
| vlow_outside_while = -5.745752e-06 at= 1.002500e-08 |
| peak_to_peak_outside_while= 1.15061e-05 |
| supply_current_rms = 6.75140e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66618 |
| vctrl 0 |
| x1.net8 0.938142 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.938142 |
| x1.net2 1.79219 |
| x1.net4 0.130516 |
| x1.pg3 1.8 |
| x1.pg0 1.66618 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66618 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.60237e-11 |
| vmeas_current_gnd#branch 1.37538e-05 |
| vmeas_current_vdd#branch 1.37538e-05 |
| v2#branch -1.37539e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 6.18212e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 1.45400e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 5.304070e-06 at= 1.001500e-08 |
| vlow_outside_while = -5.312619e-06 at= 1.000500e-08 |
| peak_to_peak_outside_while= 1.06167e-05 |
| supply_current_rms = 7.86452e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66618 |
| vctrl 0 |
| x1.net8 0.938142 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.938142 |
| x1.net2 1.79219 |
| x1.net4 0.130516 |
| x1.pg3 1.8 |
| x1.pg0 1.66618 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66618 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.60237e-11 |
| vmeas_current_gnd#branch 1.37538e-05 |
| vmeas_current_vdd#branch 1.37538e-05 |
| v2#branch -1.37539e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 1.53894e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 1.62993e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 2.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 3.147335e-06 at= 1.000500e-08 |
| vlow_outside_while = -2.546222e-06 at= 1.001500e-08 |
| peak_to_peak_outside_while= 5.69356e-06 |
| supply_current_rms = 5.53727e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66618 |
| vctrl 0 |
| x1.net8 0.938142 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.938142 |
| x1.net2 1.79219 |
| x1.net4 0.130516 |
| x1.pg3 1.8 |
| x1.pg0 1.66618 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66618 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.60237e-11 |
| vmeas_current_gnd#branch 1.37538e-05 |
| vmeas_current_vdd#branch 1.37538e-05 |
| v2#branch -1.37539e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 6.29585e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.40052e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 3.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.202137e-05 at= 1.000500e-08 |
| vlow_outside_while = -1.196396e-05 at= 1.001500e-08 |
| peak_to_peak_outside_while= 2.39853e-05 |
| supply_current_rms = 8.03314e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66618 |
| vctrl 0 |
| x1.net8 0.938142 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.938142 |
| x1.net2 1.79219 |
| x1.net4 0.130516 |
| x1.pg3 1.8 |
| x1.pg0 1.66618 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66618 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.60237e-11 |
| vmeas_current_gnd#branch 1.37538e-05 |
| vmeas_current_vdd#branch 1.37538e-05 |
| v2#branch -1.37539e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 2.82455e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 7.20352e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 4.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.055187e-05 at= 1.000500e-08 |
| vlow_outside_while = -1.052455e-05 at= 1.001500e-08 |
| peak_to_peak_outside_while= 2.10764e-05 |
| supply_current_rms = 6.04304e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66618 |
| vctrl 0 |
| x1.net8 0.938142 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.938142 |
| x1.net2 1.79219 |
| x1.net4 0.130516 |
| x1.pg3 1.8 |
| x1.pg0 1.66618 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66618 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.60237e-11 |
| vmeas_current_gnd#branch 1.37538e-05 |
| vmeas_current_vdd#branch 1.37538e-05 |
| v2#branch -1.37539e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 3.12736e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.70702e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 5.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.665290e-02 at= 1.905500e-08 |
| vlow_outside_while = -2.055050e-02 at= 1.900500e-08 |
| peak_to_peak_outside_while= 3.72034e-02 |
| supply_current_rms = 6.06047e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66618 |
| vctrl 0 |
| x1.net8 0.938142 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.938142 |
| x1.net2 1.79219 |
| x1.net4 0.130516 |
| x1.pg3 1.8 |
| x1.pg0 1.66618 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66618 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.60237e-11 |
| vmeas_current_gnd#branch 1.37538e-05 |
| vmeas_current_vdd#branch 1.37538e-05 |
| v2#branch -1.37539e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 1.355512e-09 targ= 6.468910e-08 trig= 6.333358e-08 |
| fvco_outside_while = 7.37729e+08 |
| supply_current_rms_outside_while= 1.43154e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 1.64976e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 6.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929133e+00 at= 1.265500e-08 |
| vlow_outside_while = -8.670451e-02 at= 1.964500e-08 |
| peak_to_peak_outside_while= 2.01584e+00 |
| supply_current_rms = 1.57495e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66618 |
| vctrl 0 |
| x1.net8 0.938142 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.938142 |
| x1.net2 1.79219 |
| x1.net4 0.130516 |
| x1.pg3 1.8 |
| x1.pg0 1.66618 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66618 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.60237e-11 |
| vmeas_current_gnd#branch 1.37538e-05 |
| vmeas_current_vdd#branch 1.37538e-05 |
| v2#branch -1.37539e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 5.881565e-10 targ= 3.053695e-08 trig= 2.994880e-08 |
| fvco_outside_while = 1.70023e+09 |
| supply_current_rms_outside_while= 2.19513e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 2.17823e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 7.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929861e+00 at= 1.795500e-08 |
| vlow_outside_while = -8.777685e-02 at= 1.816500e-08 |
| peak_to_peak_outside_while= 2.01764e+00 |
| supply_current_rms = 2.21937e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66618 |
| vctrl 0 |
| x1.net8 0.938142 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.938142 |
| x1.net2 1.79219 |
| x1.net4 0.130516 |
| x1.pg3 1.8 |
| x1.pg0 1.66618 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66618 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.60237e-11 |
| vmeas_current_gnd#branch 1.37538e-05 |
| vmeas_current_vdd#branch 1.37538e-05 |
| v2#branch -1.37539e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 3.260785e-10 targ= 1.840352e-08 trig= 1.807744e-08 |
| fvco_outside_while = 3.06675e+09 |
| supply_current_rms_outside_while= 3.56209e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.57712e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 8.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.930199e+00 at= 1.789500e-08 |
| vlow_outside_while = -8.578716e-02 at= 1.446500e-08 |
| peak_to_peak_outside_while= 2.01599e+00 |
| supply_current_rms = 3.50776e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66618 |
| vctrl 0 |
| x1.net8 0.938142 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.938142 |
| x1.net2 1.79219 |
| x1.net4 0.130516 |
| x1.pg3 1.8 |
| x1.pg0 1.66618 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66618 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.60237e-11 |
| vmeas_current_gnd#branch 1.37538e-05 |
| vmeas_current_vdd#branch 1.37538e-05 |
| v2#branch -1.37539e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.893118e-10 targ= 1.647110e-08 trig= 1.618179e-08 |
| fvco_outside_while = 3.45648e+09 |
| supply_current_rms_outside_while= 4.25893e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.19923e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 9.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.928056e+00 at= 1.484500e-08 |
| vlow_outside_while = -8.567244e-02 at= 1.268500e-08 |
| peak_to_peak_outside_while= 2.01373e+00 |
| supply_current_rms = 4.19349e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66618 |
| vctrl 0 |
| x1.net8 0.938142 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.938142 |
| x1.net2 1.79219 |
| x1.net4 0.130516 |
| x1.pg3 1.8 |
| x1.pg0 1.66618 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66618 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.60237e-11 |
| vmeas_current_gnd#branch 1.37538e-05 |
| vmeas_current_vdd#branch 1.37538e-05 |
| v2#branch -1.37539e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.744849e-10 targ= 1.572040e-08 trig= 1.544592e-08 |
| fvco_outside_while = 3.64319e+09 |
| supply_current_rms_outside_while= 4.64216e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.61953e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.000000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.926341e+00 at= 1.939500e-08 |
| vlow_outside_while = -8.481796e-02 at= 1.679500e-08 |
| peak_to_peak_outside_while= 2.01116e+00 |
| supply_current_rms = 4.57540e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66618 |
| vctrl 0 |
| x1.net8 0.938142 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.938142 |
| x1.net2 1.79219 |
| x1.net4 0.130516 |
| x1.pg3 1.8 |
| x1.pg0 1.66618 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66618 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.60237e-11 |
| vmeas_current_gnd#branch 1.37538e-05 |
| vmeas_current_vdd#branch 1.37538e-05 |
| v2#branch -1.37539e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.668066e-10 targ= 1.533218e-08 trig= 1.506537e-08 |
| fvco_outside_while = 3.74803e+09 |
| supply_current_rms_outside_while= 4.99621e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.95793e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.100000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.924872e+00 at= 1.756500e-08 |
| vlow_outside_while = -8.446532e-02 at= 1.931500e-08 |
| peak_to_peak_outside_while= 2.00934e+00 |
| supply_current_rms = 4.92457e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66618 |
| vctrl 0 |
| x1.net8 0.938142 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.938142 |
| x1.net2 1.79219 |
| x1.net4 0.130516 |
| x1.pg3 1.8 |
| x1.pg0 1.66618 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66618 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.60237e-11 |
| vmeas_current_gnd#branch 1.37538e-05 |
| vmeas_current_vdd#branch 1.37538e-05 |
| v2#branch -1.37539e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.629654e-10 targ= 1.512811e-08 trig= 1.486514e-08 |
| fvco_outside_while = 3.80278e+09 |
| supply_current_rms_outside_while= 5.25609e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.20757e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.200000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.923949e+00 at= 1.811500e-08 |
| vlow_outside_while = -8.425554e-02 at= 1.694500e-08 |
| peak_to_peak_outside_while= 2.00820e+00 |
| supply_current_rms = 5.18060e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66618 |
| vctrl 0 |
| x1.net8 0.938142 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.938142 |
| x1.net2 1.79219 |
| x1.net4 0.130516 |
| x1.pg3 1.8 |
| x1.pg0 1.66618 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66618 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.60237e-11 |
| vmeas_current_gnd#branch 1.37538e-05 |
| vmeas_current_vdd#branch 1.37538e-05 |
| v2#branch -1.37539e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.611173e-10 targ= 1.501543e-08 trig= 1.475431e-08 |
| fvco_outside_while = 3.82970e+09 |
| supply_current_rms_outside_while= 5.50795e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.36673e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.300000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.923526e+00 at= 1.745500e-08 |
| vlow_outside_while = -8.400000e-02 at= 1.629500e-08 |
| peak_to_peak_outside_while= 2.00753e+00 |
| supply_current_rms = 5.42987e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66618 |
| vctrl 0 |
| x1.net8 0.938142 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.938142 |
| x1.net2 1.79219 |
| x1.net4 0.130516 |
| x1.pg3 1.8 |
| x1.pg0 1.66618 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66618 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.60237e-11 |
| vmeas_current_gnd#branch 1.37538e-05 |
| vmeas_current_vdd#branch 1.37538e-05 |
| v2#branch -1.37539e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.595432e-10 targ= 1.494198e-08 trig= 1.468244e-08 |
| fvco_outside_while = 3.85292e+09 |
| supply_current_rms_outside_while= 6.09228e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.66704e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.400000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.923494e+00 at= 1.347500e-08 |
| vlow_outside_while = -8.382245e-02 at= 1.621500e-08 |
| peak_to_peak_outside_while= 2.00732e+00 |
| supply_current_rms = 5.91837e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66618 |
| vctrl 0 |
| x1.net8 0.938142 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.938142 |
| x1.net2 1.79219 |
| x1.net4 0.130516 |
| x1.pg3 1.8 |
| x1.pg0 1.66618 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66618 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.60237e-11 |
| vmeas_current_gnd#branch 1.37538e-05 |
| vmeas_current_vdd#branch 1.37538e-05 |
| v2#branch -1.37539e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.586580e-10 targ= 1.488975e-08 trig= 1.463110e-08 |
| fvco_outside_while = 3.86611e+09 |
| supply_current_rms_outside_while= 5.63674e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.49396e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.500000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.923446e+00 at= 1.601500e-08 |
| vlow_outside_while = -8.347040e-02 at= 1.098500e-08 |
| peak_to_peak_outside_while= 2.00692e+00 |
| supply_current_rms = 5.55070e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66618 |
| vctrl 0 |
| x1.net8 0.938142 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.938142 |
| x1.net2 1.79219 |
| x1.net4 0.130516 |
| x1.pg3 1.8 |
| x1.pg0 1.66618 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66618 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.60237e-11 |
| vmeas_current_gnd#branch 1.37538e-05 |
| vmeas_current_vdd#branch 1.37538e-05 |
| v2#branch -1.37539e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.577190e-10 targ= 1.485091e-08 trig= 1.459320e-08 |
| fvco_outside_while = 3.88020e+09 |
| supply_current_rms_outside_while= 5.56363e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.50795e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.600000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.923358e+00 at= 1.571500e-08 |
| vlow_outside_while = -8.329946e-02 at= 1.869500e-08 |
| peak_to_peak_outside_while= 2.00666e+00 |
| supply_current_rms = 5.48355e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66618 |
| vctrl 0 |
| x1.net8 0.938142 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.938142 |
| x1.net2 1.79219 |
| x1.net4 0.130516 |
| x1.pg3 1.8 |
| x1.pg0 1.66618 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66618 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.60237e-11 |
| vmeas_current_gnd#branch 1.37538e-05 |
| vmeas_current_vdd#branch 1.37538e-05 |
| v2#branch -1.37539e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.571009e-10 targ= 1.482085e-08 trig= 1.456374e-08 |
| fvco_outside_while = 3.88952e+09 |
| supply_current_rms_outside_while= 5.61064e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.54720e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.700000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.923292e+00 at= 1.748500e-08 |
| vlow_outside_while = -8.317787e-02 at= 1.685500e-08 |
| peak_to_peak_outside_while= 2.00647e+00 |
| supply_current_rms = 5.53095e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12909e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.66618 |
| vctrl 0 |
| x1.net8 0.938142 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.8 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 3.93259e-09 |
| x1.vco_switch_n_v2_1/selb 2.69671e-09 |
| sel1 1.8 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.938142 |
| x1.net2 1.79219 |
| x1.net4 0.130516 |
| x1.pg3 1.8 |
| x1.pg0 1.66618 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.66618 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 2.69671e-09 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.60237e-11 |
| vmeas_current_gnd#branch 1.37538e-05 |
| vmeas_current_vdd#branch 1.37538e-05 |
| v2#branch -1.37539e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.572479e-10 targ= 1.479746e-08 trig= 1.454021e-08 |
| fvco_outside_while = 3.88730e+09 |
| supply_current_rms_outside_while= 5.60015e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.57010e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.923247e+00 at= 1.848500e-08 |
| vlow_outside_while = -8.309296e-02 at= 1.965500e-08 |
| peak_to_peak_outside_while= 2.00634e+00 |
| supply_current_rms = 5.51593e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.572479e-10 targ= 1.479746e-08 trig= 1.454021e-08 |
| Original line no.: 0, new internal line no.: 12460: |
| insertnumber: fails. |
| s = ".meas tran fvco_outside_while param= 3.887300726576908e+09 " u=" 3.887300726576908e+09 " id=0 |
| fvco_outside_while = 3.88730e+09 |
| supply_current_rms_outside_while= 5.60015e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.57010e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.923247e+00 at= 1.848500e-08 |
| vlow_outside_while = -8.309296e-02 at= 1.965500e-08 |
| Original line no.: 0, new internal line no.: 12466: |
| insertnumber: fails. |
| s = ".meas tran peak_to_peak_outside_while param= 2.006339773436696e+00 " u=" 2.006339773436696e+00 " id=0 |
| peak_to_peak_outside_while= 2.00634e+00 |
| supply_current_rms = 5.51593e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| |
| Total analysis time (seconds) = 14.9337 |
| |
| Total CPU time (seconds) = 293.880 |
| |
| Total DRAM available = 7952.234 MB. |
| DRAM currently available = 3433.090 MB. |
| Maximum ngspice program size = 684.809 MB. |
| Current ngspice program size = 665.770 MB. |
| |
| Shared ngspice pages = 8.680 MB. |
| Text (code) pages = 7.879 MB. |
| Stack = 0 bytes. |
| Library pages = 657.324 MB. |
| |
