| |
| Compatibility modes selected: hs a |
| |
| Warning: m=xx on .subckt line will override multiplier m hierarchy! |
| |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12921e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.79999 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 3.70415e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 2.84818e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 0.000000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 7.148989e-06 at= 1.000500e-08 |
| vlow_outside_while = -5.816138e-06 at= 1.001500e-08 |
| peak_to_peak_outside_while= 1.29651e-05 |
| supply_current_rms = 6.47230e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12921e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.79999 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 1.78173e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.57157e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 9.085991e-06 at= 1.000500e-08 |
| vlow_outside_while = -9.063840e-06 at= 1.001500e-08 |
| peak_to_peak_outside_while= 1.81498e-05 |
| supply_current_rms = 5.62956e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12921e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.79999 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 1.71180e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.48885e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 2.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 8.172318e-06 at= 1.001500e-08 |
| vlow_outside_while = -8.170118e-06 at= 1.000500e-08 |
| peak_to_peak_outside_while= 1.63424e-05 |
| supply_current_rms = 5.58966e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12921e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.79999 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 4.19866e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.82371e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 3.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 8.469881e-06 at= 1.000500e-08 |
| vlow_outside_while = -6.813848e-06 at= 1.001500e-08 |
| peak_to_peak_outside_while= 1.52837e-05 |
| supply_current_rms = 6.74489e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12921e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.79999 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 1.44014e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.00485e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 4.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 7.805722e-06 at= 1.000500e-08 |
| vlow_outside_while = -7.770741e-06 at= 1.001500e-08 |
| peak_to_peak_outside_while= 1.55765e-05 |
| supply_current_rms = 5.49509e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12921e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.79999 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 3.85891e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.94918e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 5.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 6.633867e-06 at= 1.001500e-08 |
| vlow_outside_while = -6.625066e-06 at= 1.000500e-08 |
| peak_to_peak_outside_while= 1.32589e-05 |
| supply_current_rms = 6.25657e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12921e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.79999 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 9.11475e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 1.06769e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 6.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.927379e+00 at= 1.687500e-08 |
| vlow_outside_while = -8.534463e-02 at= 1.323500e-08 |
| peak_to_peak_outside_while= 2.01272e+00 |
| supply_current_rms = 9.96616e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12921e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.79999 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 8.209290e-10 targ= 4.030826e-08 trig= 3.948733e-08 |
| fvco_outside_while = 1.21813e+09 |
| supply_current_rms_outside_while= 2.02276e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 2.07230e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 7.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929501e+00 at= 1.691500e-08 |
| vlow_outside_while = -8.768217e-02 at= 1.826500e-08 |
| peak_to_peak_outside_while= 2.01718e+00 |
| supply_current_rms = 1.96533e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12921e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.79999 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 4.151597e-10 targ= 2.251247e-08 trig= 2.209731e-08 |
| fvco_outside_while = 2.40871e+09 |
| supply_current_rms_outside_while= 3.31520e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 2.80562e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 8.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929863e+00 at= 1.685500e-08 |
| vlow_outside_while = -8.804678e-02 at= 1.293500e-08 |
| peak_to_peak_outside_while= 2.01791e+00 |
| supply_current_rms = 3.22330e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12921e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.79999 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 3.119562e-10 targ= 1.749754e-08 trig= 1.718558e-08 |
| fvco_outside_while = 3.20558e+09 |
| supply_current_rms_outside_while= 3.93646e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.88645e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 9.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929611e+00 at= 1.793500e-08 |
| vlow_outside_while = -8.653253e-02 at= 1.934500e-08 |
| peak_to_peak_outside_while= 2.01614e+00 |
| supply_current_rms = 3.87597e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12921e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.79999 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.946199e-10 targ= 1.659260e-08 trig= 1.629798e-08 |
| fvco_outside_while = 3.39420e+09 |
| supply_current_rms_outside_while= 4.38070e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.34882e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.000000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.928594e+00 at= 1.346500e-08 |
| vlow_outside_while = -8.575226e-02 at= 1.391500e-08 |
| peak_to_peak_outside_while= 2.01435e+00 |
| supply_current_rms = 4.32008e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12921e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.79999 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.855879e-10 targ= 1.609632e-08 trig= 1.581073e-08 |
| fvco_outside_while = 3.50155e+09 |
| supply_current_rms_outside_while= 4.77643e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.73615e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.100000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.928031e+00 at= 1.506500e-08 |
| vlow_outside_while = -8.486167e-02 at= 1.521500e-08 |
| peak_to_peak_outside_while= 2.01289e+00 |
| supply_current_rms = 4.70934e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12921e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.79999 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.796125e-10 targ= 1.580156e-08 trig= 1.552194e-08 |
| fvco_outside_while = 3.57638e+09 |
| supply_current_rms_outside_while= 5.59124e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.20674e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.200000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.927921e+00 at= 1.898500e-08 |
| vlow_outside_while = -8.428722e-02 at= 1.689500e-08 |
| peak_to_peak_outside_while= 2.01221e+00 |
| supply_current_rms = 5.46063e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12921e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.79999 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.765754e-10 targ= 1.590718e-08 trig= 1.563060e-08 |
| fvco_outside_while = 3.61565e+09 |
| supply_current_rms_outside_while= 5.18959e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.15823e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.300000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.927776e+00 at= 1.297500e-08 |
| vlow_outside_while = -8.335480e-02 at= 1.864500e-08 |
| peak_to_peak_outside_while= 2.01113e+00 |
| supply_current_rms = 5.11270e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12921e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.79999 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.740459e-10 targ= 1.579233e-08 trig= 1.551828e-08 |
| fvco_outside_while = 3.64902e+09 |
| supply_current_rms_outside_while= 5.27101e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.24019e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.400000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.927745e+00 at= 1.891500e-08 |
| vlow_outside_while = -8.276111e-02 at= 1.960500e-08 |
| peak_to_peak_outside_while= 2.01051e+00 |
| supply_current_rms = 5.19224e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12921e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.79999 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.724261e-10 targ= 1.571084e-08 trig= 1.543842e-08 |
| fvco_outside_while = 3.67072e+09 |
| supply_current_rms_outside_while= 5.32739e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.30146e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.500000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.927752e+00 at= 1.336500e-08 |
| vlow_outside_while = -8.229432e-02 at= 1.132500e-08 |
| peak_to_peak_outside_while= 2.01005e+00 |
| supply_current_rms = 5.25124e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12921e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.79999 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.713094e-10 targ= 1.565023e-08 trig= 1.537892e-08 |
| fvco_outside_while = 3.68583e+09 |
| supply_current_rms_outside_while= 5.36775e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.34543e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.600000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.927757e+00 at= 1.331500e-08 |
| vlow_outside_while = -8.191015e-02 at= 1.752500e-08 |
| peak_to_peak_outside_while= 2.00967e+00 |
| supply_current_rms = 5.29414e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12921e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.79999 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.705062e-10 targ= 1.560360e-08 trig= 1.533309e-08 |
| fvco_outside_while = 3.69677e+09 |
| supply_current_rms_outside_while= 5.40656e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.38045e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.700000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.927765e+00 at= 1.841500e-08 |
| vlow_outside_while = -8.161881e-02 at= 1.936500e-08 |
| peak_to_peak_outside_while= 2.00938e+00 |
| supply_current_rms = 5.32729e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.12921e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67179 |
| vctrl 0 |
| x1.net8 0.900366 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.79999 |
| x1.ng0 3.93259e-09 |
| x1.vco_switch_n_v2_0/selb 2.69671e-09 |
| sel0 1.8 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.900366 |
| x1.net2 1.78805 |
| x1.net4 0.374104 |
| x1.pg3 1.8 |
| x1.pg0 1.67179 |
| x1.vco_switch_p_0/selb 2.69671e-09 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.68327e-11 |
| vmeas_current_gnd#branch 1.43205e-05 |
| vmeas_current_vdd#branch 1.43206e-05 |
| v2#branch -1.43207e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.697952e-10 targ= 1.556739e-08 trig= 1.529759e-08 |
| fvco_outside_while = 3.70651e+09 |
| supply_current_rms_outside_while= 5.43564e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.40924e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.927775e+00 at= 1.459500e-08 |
| vlow_outside_while = -8.138054e-02 at= 1.230500e-08 |
| peak_to_peak_outside_while= 2.00916e+00 |
| supply_current_rms = 5.35096e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.697952e-10 targ= 1.556739e-08 trig= 1.529759e-08 |
| Original line no.: 0, new internal line no.: 12460: |
| insertnumber: fails. |
| s = ".meas tran fvco_outside_while param= 3.706514527843505e+09 " u=" 3.706514527843505e+09 " id=0 |
| fvco_outside_while = 3.70651e+09 |
| supply_current_rms_outside_while= 5.43564e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.40924e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.927775e+00 at= 1.459500e-08 |
| vlow_outside_while = -8.138054e-02 at= 1.230500e-08 |
| Original line no.: 0, new internal line no.: 12466: |
| insertnumber: fails. |
| s = ".meas tran peak_to_peak_outside_while param= 2.009155417828525e+00 " u=" 2.009155417828525e+00 " id=0 |
| peak_to_peak_outside_while= 2.00916e+00 |
| supply_current_rms = 5.35096e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| |
| Total analysis time (seconds) = 16.0491 |
| |
| Total CPU time (seconds) = 301.170 |
| |
| Total DRAM available = 7952.234 MB. |
| DRAM currently available = 2873.715 MB. |
| Maximum ngspice program size = 684.809 MB. |
| Current ngspice program size = 666.141 MB. |
| |
| Shared ngspice pages = 9.055 MB. |
| Text (code) pages = 7.879 MB. |
| Stack = 0 bytes. |
| Library pages = 657.324 MB. |
| |
