| |
| Compatibility modes selected: hs a |
| |
| Warning: m=xx on .subckt line will override multiplier m hierarchy! |
| |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.70206e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.77531 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 1.60502e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.21812e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 0.000000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 2.685082e-06 at= 1.000500e-08 |
| vlow_outside_while = -2.663742e-06 at= 1.001500e-08 |
| peak_to_peak_outside_while= 5.34882e-06 |
| supply_current_rms = 5.02593e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.70206e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.77531 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 2.82300e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 2.02051e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.234558e-05 at= 1.000500e-08 |
| vlow_outside_while = -1.231343e-05 at= 1.001500e-08 |
| peak_to_peak_outside_while= 2.46590e-05 |
| supply_current_rms = 5.45163e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.70206e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.77531 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 2.90731e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.65320e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 2.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.445580e-05 at= 1.000500e-08 |
| vlow_outside_while = -1.442448e-05 at= 1.001500e-08 |
| peak_to_peak_outside_while= 2.88803e-05 |
| supply_current_rms = 5.47040e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.70206e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.77531 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 1.92312e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.59308e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 3.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 4.260241e-06 at= 1.000500e-08 |
| vlow_outside_while = -4.230769e-06 at= 1.001500e-08 |
| peak_to_peak_outside_while= 8.49101e-06 |
| supply_current_rms = 5.08798e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.70206e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.77531 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 3.15766e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.99497e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 4.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 8.325977e-06 at= 1.000500e-08 |
| vlow_outside_while = -8.295543e-06 at= 1.001500e-08 |
| peak_to_peak_outside_while= 1.66215e-05 |
| supply_current_rms = 5.58374e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.70206e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.77531 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 3.80296e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 2.18746e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 5.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 4.022084e-06 at= 1.001500e-08 |
| vlow_outside_while = -4.019306e-06 at= 1.000500e-08 |
| peak_to_peak_outside_while= 8.04139e-06 |
| supply_current_rms = 5.96467e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.70206e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.77531 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 6.67407e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 8.04816e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 6.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.926822e+00 at= 1.419500e-08 |
| vlow_outside_while = -8.685949e-02 at= 1.940500e-08 |
| peak_to_peak_outside_while= 2.01368e+00 |
| supply_current_rms = 8.39790e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.70206e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.77531 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 1.220333e-09 targ= 5.733917e-08 trig= 5.611884e-08 |
| fvco_outside_while = 8.19449e+08 |
| supply_current_rms_outside_while= 1.64451e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 1.47914e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 7.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929086e+00 at= 1.367500e-08 |
| vlow_outside_while = -8.740907e-02 at= 1.666500e-08 |
| peak_to_peak_outside_while= 2.01649e+00 |
| supply_current_rms = 1.71008e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.70206e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.77531 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 5.561425e-10 targ= 2.907698e-08 trig= 2.852084e-08 |
| fvco_outside_while = 1.79810e+09 |
| supply_current_rms_outside_while= 2.98916e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 2.23886e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 8.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929854e+00 at= 1.208500e-08 |
| vlow_outside_while = -8.789232e-02 at= 1.236500e-08 |
| peak_to_peak_outside_while= 2.01775e+00 |
| supply_current_rms = 2.85982e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.70206e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.77531 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 3.729117e-10 targ= 2.034901e-08 trig= 1.997610e-08 |
| fvco_outside_while = 2.68160e+09 |
| supply_current_rms_outside_while= 3.29776e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.29582e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 9.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.930230e+00 at= 1.530500e-08 |
| vlow_outside_while = -8.686830e-02 at= 1.808500e-08 |
| peak_to_peak_outside_while= 2.01710e+00 |
| supply_current_rms = 3.25313e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.70206e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.77531 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 3.216990e-10 targ= 1.785832e-08 trig= 1.753662e-08 |
| fvco_outside_while = 3.10850e+09 |
| supply_current_rms_outside_while= 4.02831e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.01324e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.000000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.930097e+00 at= 1.574500e-08 |
| vlow_outside_while = -8.590436e-02 at= 1.815500e-08 |
| peak_to_peak_outside_while= 2.01600e+00 |
| supply_current_rms = 3.97393e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.70206e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.77531 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 3.070522e-10 targ= 1.713027e-08 trig= 1.682322e-08 |
| fvco_outside_while = 3.25678e+09 |
| supply_current_rms_outside_while= 4.46822e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.45032e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.100000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929773e+00 at= 1.879500e-08 |
| vlow_outside_while = -8.527933e-02 at= 1.710500e-08 |
| peak_to_peak_outside_while= 2.01505e+00 |
| supply_current_rms = 4.40441e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.70206e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.77531 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 3.004545e-10 targ= 1.678842e-08 trig= 1.648797e-08 |
| fvco_outside_while = 3.32829e+09 |
| supply_current_rms_outside_while= 4.91797e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.90567e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.200000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929785e+00 at= 1.150500e-08 |
| vlow_outside_while = -8.455985e-02 at= 1.195500e-08 |
| peak_to_peak_outside_while= 2.01434e+00 |
| supply_current_rms = 4.84125e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.70206e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.77531 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.965687e-10 targ= 1.660197e-08 trig= 1.630540e-08 |
| fvco_outside_while = 3.37190e+09 |
| supply_current_rms_outside_while= 4.93501e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.89117e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.300000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929759e+00 at= 1.316500e-08 |
| vlow_outside_while = -8.356754e-02 at= 1.479500e-08 |
| peak_to_peak_outside_while= 2.01333e+00 |
| supply_current_rms = 4.86269e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.70206e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.77531 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.949554e-10 targ= 1.647564e-08 trig= 1.618069e-08 |
| fvco_outside_while = 3.39034e+09 |
| supply_current_rms_outside_while= 4.97953e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.97725e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.400000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929789e+00 at= 1.159500e-08 |
| vlow_outside_while = -8.271477e-02 at= 1.026500e-08 |
| peak_to_peak_outside_while= 2.01250e+00 |
| supply_current_rms = 4.91212e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.70206e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.77531 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.925360e-10 targ= 1.638041e-08 trig= 1.608787e-08 |
| fvco_outside_while = 3.41838e+09 |
| supply_current_rms_outside_while= 5.04090e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.04007e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.500000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929832e+00 at= 1.299500e-08 |
| vlow_outside_while = -8.202431e-02 at= 1.957500e-08 |
| peak_to_peak_outside_while= 2.01186e+00 |
| supply_current_rms = 4.97294e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.70206e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.77531 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.911407e-10 targ= 1.630662e-08 trig= 1.601548e-08 |
| fvco_outside_while = 3.43476e+09 |
| supply_current_rms_outside_while= 5.09257e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.08317e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.600000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929862e+00 at= 1.672500e-08 |
| vlow_outside_while = -8.145274e-02 at= 1.715500e-08 |
| peak_to_peak_outside_while= 2.01132e+00 |
| supply_current_rms = 5.02101e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.70206e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.77531 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.900933e-10 targ= 1.624616e-08 trig= 1.595607e-08 |
| fvco_outside_while = 3.44717e+09 |
| supply_current_rms_outside_while= 5.11892e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.13273e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.700000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929885e+00 at= 1.985500e-08 |
| vlow_outside_while = -7.757051e-02 at= 1.999500e-08 |
| peak_to_peak_outside_while= 2.00746e+00 |
| supply_current_rms = 5.04892e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.70206e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.net5 1.77531 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.892783e-10 targ= 1.619846e-08 trig= 1.590918e-08 |
| fvco_outside_while = 3.45688e+09 |
| supply_current_rms_outside_while= 5.15036e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.15425e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929891e+00 at= 1.314500e-08 |
| vlow_outside_while = -8.055922e-02 at= 1.906500e-08 |
| peak_to_peak_outside_while= 2.01045e+00 |
| supply_current_rms = 5.07799e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.892783e-10 targ= 1.619846e-08 trig= 1.590918e-08 |
| Original line no.: 0, new internal line no.: 12460: |
| insertnumber: fails. |
| s = ".meas tran fvco_outside_while param= 3.456879064059381e+09 " u=" 3.456879064059381e+09 " id=0 |
| fvco_outside_while = 3.45688e+09 |
| supply_current_rms_outside_while= 5.15036e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.15425e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.929891e+00 at= 1.314500e-08 |
| vlow_outside_while = -8.055922e-02 at= 1.906500e-08 |
| Original line no.: 0, new internal line no.: 12466: |
| insertnumber: fails. |
| s = ".meas tran peak_to_peak_outside_while param= 2.010450557855210e+00 " u=" 2.010450557855210e+00 " id=0 |
| peak_to_peak_outside_while= 2.01045e+00 |
| supply_current_rms = 5.07799e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| |
| Total analysis time (seconds) = 11.9791 |
| |
| Total CPU time (seconds) = 286.471 |
| |
| Total DRAM available = 7952.234 MB. |
| DRAM currently available = 2314.594 MB. |
| Maximum ngspice program size = 684.809 MB. |
| Current ngspice program size = 665.219 MB. |
| |
| Shared ngspice pages = 8.133 MB. |
| Text (code) pages = 7.879 MB. |
| Stack = 0 bytes. |
| Library pages = 657.324 MB. |
| |
