| |
| Compatibility modes selected: hs a |
| |
| Warning: m=xx on .subckt line will override multiplier m hierarchy! |
| |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.74924e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net5 1.77531 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 1.45044e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.74357e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 0.000000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 3.282756e-06 at= 1.046500e-08 |
| vlow_outside_while = -3.268921e-06 at= 1.045500e-08 |
| peak_to_peak_outside_while= 6.55168e-06 |
| supply_current_rms = 4.93030e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.74924e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net5 1.77531 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 5.79493e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 1.79898e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 2.120739e-06 at= 1.073500e-08 |
| vlow_outside_while = -2.106574e-06 at= 1.074500e-08 |
| peak_to_peak_outside_while= 4.22731e-06 |
| supply_current_rms = 7.19837e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.74924e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net5 1.77531 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 6.00159e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 1.51033e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 2.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 3.305597e-06 at= 1.069500e-08 |
| vlow_outside_while = -3.291331e-06 at= 1.068500e-08 |
| peak_to_peak_outside_while= 6.59693e-06 |
| supply_current_rms = 7.32293e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.74924e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net5 1.77531 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 1.96575e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 2.63321e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 3.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 3.502476e-06 at= 1.001500e-08 |
| vlow_outside_while = -2.768660e-06 at= 1.000500e-08 |
| peak_to_peak_outside_while= 6.27114e-06 |
| supply_current_rms = 5.06429e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.74924e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net5 1.77531 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 2.61733e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 1.52479e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 4.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 7.383879e-07 at= 1.045500e-08 |
| vlow_outside_while = -7.244229e-07 at= 1.044500e-08 |
| peak_to_peak_outside_while= 1.46281e-06 |
| supply_current_rms = 5.33981e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.74924e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net5 1.77531 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 1.51019e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 2.76534e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 5.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.290746e-06 at= 1.388500e-08 |
| vlow_outside_while = -1.111609e-06 at= 1.211500e-08 |
| peak_to_peak_outside_while= 2.40236e-06 |
| supply_current_rms = 5.48683e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.74924e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net5 1.77531 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| |
| Error: measure tvco_outside_while (TRIG) : out of interval |
| .meas tran tvco_outside_while trig v(out) val=0.5*1.8 rise=50 targ v(out) val=0.5*1.8 rise=51 failed! |
| |
| Original line no.: 0, new internal line no.: 12460: |
| Undefined number [tvco_outside_while] |
| Original line no.: 0, new internal line no.: 12460: |
| Cannot compute substitute |
| fvco_outside_while = failed |
| supply_current_rms_outside_while= 8.66225e-05 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 8.03177e-05 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 6.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.926349e+00 at= 1.416500e-08 |
| vlow_outside_while = -7.607944e-02 at= 1.936500e-08 |
| peak_to_peak_outside_while= 2.00243e+00 |
| supply_current_rms = 9.26284e-05 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.74924e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net5 1.77531 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 1.219275e-09 targ= 5.727549e-08 trig= 5.605621e-08 |
| fvco_outside_while = 8.20159e+08 |
| supply_current_rms_outside_while= 1.52863e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 1.75645e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 7.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.927590e+00 at= 1.146500e-08 |
| vlow_outside_while = -8.358438e-02 at= 1.892500e-08 |
| peak_to_peak_outside_while= 2.01117e+00 |
| supply_current_rms = 1.60002e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.74924e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net5 1.77531 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 5.550529e-10 targ= 2.903311e-08 trig= 2.847806e-08 |
| fvco_outside_while = 1.80163e+09 |
| supply_current_rms_outside_while= 2.21881e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 2.42489e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 8.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.928091e+00 at= 1.262500e-08 |
| vlow_outside_while = -8.416978e-02 at= 1.790500e-08 |
| peak_to_peak_outside_while= 2.01226e+00 |
| supply_current_rms = 2.20979e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.74924e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net5 1.77531 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 3.723450e-10 targ= 2.031834e-08 trig= 1.994599e-08 |
| fvco_outside_while = 2.68568e+09 |
| supply_current_rms_outside_while= 3.23747e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.29682e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 9.000000e-01 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.928581e+00 at= 1.677500e-08 |
| vlow_outside_while = -8.323504e-02 at= 1.321500e-08 |
| peak_to_peak_outside_while= 2.01182e+00 |
| supply_current_rms = 3.19775e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.74924e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net5 1.77531 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 3.213757e-10 targ= 1.782538e-08 trig= 1.750400e-08 |
| fvco_outside_while = 3.11162e+09 |
| supply_current_rms_outside_while= 4.01999e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 3.99814e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.000000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.928540e+00 at= 1.186500e-08 |
| vlow_outside_while = -8.228328e-02 at= 1.908500e-08 |
| peak_to_peak_outside_while= 2.01082e+00 |
| supply_current_rms = 3.95742e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.74924e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net5 1.77531 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 3.067518e-10 targ= 1.709735e-08 trig= 1.679060e-08 |
| fvco_outside_while = 3.25996e+09 |
| supply_current_rms_outside_while= 4.41493e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.42932e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.100000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.928154e+00 at= 1.753500e-08 |
| vlow_outside_while = -8.162204e-02 at= 1.952500e-08 |
| peak_to_peak_outside_while= 2.00978e+00 |
| supply_current_rms = 4.35011e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.74924e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net5 1.77531 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.999080e-10 targ= 1.675532e-08 trig= 1.645541e-08 |
| fvco_outside_while = 3.33436e+09 |
| supply_current_rms_outside_while= 1.22433e-03 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 8.32445e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.200000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.928053e+00 at= 1.298500e-08 |
| vlow_outside_while = -7.868092e-02 at= 1.013500e-08 |
| peak_to_peak_outside_while= 2.00673e+00 |
| supply_current_rms = 1.55254e-03 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.74924e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net5 1.77531 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.961271e-10 targ= 1.656999e-08 trig= 1.627386e-08 |
| fvco_outside_while = 3.37693e+09 |
| supply_current_rms_outside_while= 4.86435e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.87383e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.300000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.928173e+00 at= 1.699500e-08 |
| vlow_outside_while = -7.988881e-02 at= 1.980500e-08 |
| peak_to_peak_outside_while= 2.00806e+00 |
| supply_current_rms = 4.79251e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.74924e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net5 1.77531 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.941737e-10 targ= 1.644394e-08 trig= 1.614977e-08 |
| fvco_outside_while = 3.39935e+09 |
| supply_current_rms_outside_while= 4.93905e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 4.94981e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.400000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.928210e+00 at= 1.745500e-08 |
| vlow_outside_while = -7.907816e-02 at= 1.612500e-08 |
| peak_to_peak_outside_while= 2.00729e+00 |
| supply_current_rms = 4.87049e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.74924e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net5 1.77531 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.920152e-10 targ= 1.634927e-08 trig= 1.605725e-08 |
| fvco_outside_while = 3.42448e+09 |
| supply_current_rms_outside_while= 5.00395e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.01123e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.500000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.928236e+00 at= 1.180500e-08 |
| vlow_outside_while = -7.838218e-02 at= 1.778500e-08 |
| peak_to_peak_outside_while= 2.00662e+00 |
| supply_current_rms = 4.93683e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.74924e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net5 1.77531 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.906387e-10 targ= 1.627563e-08 trig= 1.598499e-08 |
| fvco_outside_while = 3.44070e+09 |
| supply_current_rms_outside_while= 5.05101e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.06348e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.600000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.928257e+00 at= 1.204500e-08 |
| vlow_outside_while = -7.784299e-02 at= 1.799500e-08 |
| peak_to_peak_outside_while= 2.00610e+00 |
| supply_current_rms = 4.97843e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.74924e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net5 1.77531 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.896241e-10 targ= 1.621650e-08 trig= 1.592687e-08 |
| fvco_outside_while = 3.45275e+09 |
| supply_current_rms_outside_while= 5.08428e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.09589e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.700000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.928276e+00 at= 1.750500e-08 |
| vlow_outside_while = -7.738412e-02 at= 1.387500e-08 |
| peak_to_peak_outside_while= 2.00566e+00 |
| supply_current_rms = 5.00932e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Reset re-loads circuit ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| Circuit: ** sch_path: /home/darunix/gitsandboxes/vco/vco/xschem/3-stage_cs-vco_tb.sch |
| |
| option SCALE: Scale is set to 1e-06 for instance and model parameters |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Initial Transient Solution |
| -------------------------- |
| |
| Node Voltage |
| ---- ------- |
| x1.net7 1.8 |
| x1.net6 1.74924e-06 |
| net1 1.8 |
| net2 0 |
| out 6.80528e-09 |
| x1.vgp 1.67848 |
| vctrl 0 |
| x1.net8 0.870271 |
| x1.ng3 9.63187e-09 |
| x1.ng0 9.63187e-09 |
| x1.vco_switch_n_v2_0/selb 1.8 |
| sel0 0 |
| x1.ng1 9.63187e-09 |
| x1.vco_switch_n_v2_1/selb 1.8 |
| sel1 0 |
| x1.ng2 9.63187e-09 |
| x1.vco_switch_n_v2_2/selb 1.8 |
| sel2 0 |
| x1.vco_switch_n_v2_3/selb 1.8 |
| sel3 0 |
| x1.net3 0.870271 |
| x1.net5 1.77531 |
| x1.net2 1.76679 |
| x1.net4 0.698728 |
| x1.pg3 1.8 |
| x1.pg0 1.8 |
| x1.vco_switch_p_0/selb 1.8 |
| x1.pg1 1.8 |
| x1.pg2 1.8 |
| x1.vco_switch_p_2/selb 1.8 |
| x1.vco_switch_p_1/selb 1.8 |
| x1.vco_switch_p_3/selb 1.8 |
| vdd 1.8 |
| buf1_out 2.60627e-09 |
| net4 4.9501e-09 |
| net5 4.9501e-09 |
| net3 4.9501e-09 |
| buf16_out 4.9501e-09 |
| v1#branch 1.76416e-11 |
| vmeas_current_gnd#branch 2.14689e-05 |
| vmeas_current_vdd#branch 2.14689e-05 |
| v2#branch -2.1469e-05 |
| vsel3#branch 0 |
| vsel2#branch 0 |
| vsel1#branch 0 |
| vsel0#branch 0 |
| |
| |
| No. of Data Rows : 7020 |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.886767e-10 targ= 1.616772e-08 trig= 1.587905e-08 |
| fvco_outside_while = 3.46408e+09 |
| supply_current_rms_outside_while= 5.11942e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.11167e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.928300e+00 at= 1.485500e-08 |
| vlow_outside_while = -7.700404e-02 at= 1.152500e-08 |
| peak_to_peak_outside_while= 2.00530e+00 |
| supply_current_rms = 5.04807e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| binary raw file "3-stage_cs-vco_tb_WITH_APPENDWRITE.raw" |
| Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 |
| |
| Warning: v1: no DC value, transient time 0 value used |
| |
| Measurements for Transient Analysis |
| |
| tvco_outside_while = 2.886767e-10 targ= 1.616772e-08 trig= 1.587905e-08 |
| Original line no.: 0, new internal line no.: 12460: |
| insertnumber: fails. |
| s = ".meas tran fvco_outside_while param= 3.464083085556678e+09 " u=" 3.464083085556678e+09 " id=0 |
| fvco_outside_while = 3.46408e+09 |
| supply_current_rms_outside_while= 5.11942e-04 from= 1.00000e-08 to= 4.00000e-08 |
| ground_current_rms_outside_while= 5.11167e-04 from= 1.00000e-08 to= 4.00000e-08 |
| vctrl_avg_outside_while= 1.800000e+00 from= 1.000000e-08 to= 2.000500e-08 |
| vhigh_outside_while = 1.928300e+00 at= 1.485500e-08 |
| vlow_outside_while = -7.700404e-02 at= 1.152500e-08 |
| Original line no.: 0, new internal line no.: 12466: |
| insertnumber: fails. |
| s = ".meas tran peak_to_peak_outside_while param= 2.005303996255893e+00 " u=" 2.005303996255893e+00 " id=0 |
| peak_to_peak_outside_while= 2.00530e+00 |
| supply_current_rms = 5.04807e-04 from= 0.00000e+00 to= 7.00000e-08 |
| |
| |
| Total analysis time (seconds) = 10.0878 |
| |
| Total CPU time (seconds) = 201.913 |
| |
| Total DRAM available = 7952.234 MB. |
| DRAM currently available = 129.441 MB. |
| Maximum ngspice program size = 684.824 MB. |
| Current ngspice program size = 666.086 MB. |
| |
| Shared ngspice pages = 8.977 MB. |
| Text (code) pages = 7.879 MB. |
| Stack = 0 bytes. |
| Library pages = 657.340 MB. |
| |