Clone this repo:

Branches

  1. 1cfbc60 final gds oasis by Jeff DiCorpo · 9 months ago main
  2. 375473f Merge branch 'release' of github.com:jasteve4/ActuatorController into release by jasteve4 · 10 months ago
  3. bb08d4f added cpu control overide to inputs into asic by jasteve4 · 10 months ago
  4. 4d30950 Fix Makefile pre-check by jasteve4 · 11 months ago
  5. 84d3ee8 Using TEST license by jasteve4 · 11 months ago

License

This is licensed under GNU General Public License v3.0 . Presently the efabless mpw_precheck tool recognizes the GPL 3.0 license file as the AGPL-3.0 license file which is prohibited. However, the GPL 3.0 is in the approved license lists (https://github.com/efabless/mpw_precheck/tree/mpw-5c/checks/license_check/_licenses/_approved_licenses). Thus, we have changed the LICENSE to reflect the Apache 2.0 License for the purpose of passing the mpw_precheck only. Again, the license is GPL 3.0.

Actuator Controller

This design is to precisely control the timing sequence of 10 micro-motors. The SPI enterface allows a microcontroller to pass the required commands to adjust the firing order and width of the PWM pulses.

Harding Design

make actuator_driver_controller
make user_project_wrrappper

RTL Simulation

make verify-spi_transfer_test-rtl # run spi passthrough
make verify-memory_test-rtl # run read and write to memory test
make verify-actuator_driver_test0-rtl # set actuator to all zeros position test
make verify-actuator_driver_test1-rtl # set actuator to count up and done one bit at a time
make verify-actuator_driver_test1-rt2 # set actuator to count up and done one bit at a time, invert output test

GL Simulation

make verify-spi_transfer_test-gl # run spi passthrough
make verify-memory_test-gl # run read and write to memory test
make verify-actuator_driver_test0-gl # set actuator to all zeros position test
make verify-actuator_driver_test1-gl # set actuator to count up and done one bit at a time
make verify-actuator_driver_test1-gl # set actuator to count up and done one bit at a time, invert output test

GL+SDF Simulation

make verify-spi_transfer_test-gl-sdf # run spi passthrough
make verify-memory_test-gl-sdf # run read and write to memory test
make verify-actuator_driver_test0-gl-sdf # set actuator to all zeros position test
make verify-actuator_driver_test1-gl-sdf # set actuator to count up and done one bit at a time
make verify-actuator_driver_test1-gl-sdf # set actuator to count up and done one bit at a time, invert output test

Spi Commuation Packet

Memory Mapped Registers