openlane/spi_master/config.tcl

# Global
# ------

set script_dir [file dirname [file normalize [info script]]]
# Name

set ::env(DESIGN_NAME) spim_top

# Timing configuration
set ::env(CLOCK_PERIOD) "10"
set ::env(CLOCK_PORT) "mclk"

set ::env(SYNTH_MAX_FANOUT) 4

# Sources
# -------

# Local sources + no2usb sources
set ::env(VERILOG_FILES) "\
        $script_dir/../../verilog/rtl/spi_master/src/spim_top.sv \
        $script_dir/../../verilog/rtl/spi_master/src/spim_regs.sv \
        $script_dir/../../verilog/rtl/spi_master/src/spim_clkgen.sv \
        $script_dir/../../verilog/rtl/spi_master/src/spim_ctrl.sv \
        $script_dir/../../verilog/rtl/spi_master/src/spim_rx.sv \
        $script_dir/../../verilog/rtl/spi_master/src/spim_tx.sv "

set ::env(SDC_FILE) "$script_dir/base.sdc"
set ::env(BASE_SDC_FILE) "$script_dir/base.sdc"


# Floorplanning
# -------------

set ::env(FP_PIN_ORDER_CFG) $::env(DESIGN_DIR)/pin_order.cfg

set ::env(FP_SIZING) absolute
set ::env(DIE_AREA) "0 0 600 500"



set ::env(FP_PDN_VPITCH) 50
set ::env(PDN_CFG) $script_dir/pdn.tcl

set ::env(FP_VERTICAL_HALO) 6
set ::env(PL_TARGET_DENSITY) 0.52
set ::env(PL_TARGET_DENSITY_CELLS) 0.38
set ::env(PL_OPENPHYSYN_OPTIMIZATIONS) 1
set ::env(CELL_PAD) 4

set ::env(GLB_RT_ADJUSTMENT) 0
set ::env(GLB_RT_L2_ADJUSTMENT) 0.2
set ::env(GLB_RT_L3_ADJUSTMENT) 0.25
set ::env(GLB_RT_L4_ADJUSTMENT) 0.2
set ::env(GLB_RT_L5_ADJUSTMENT) 0.1
set ::env(GLB_RT_L6_ADJUSTMENT) 0.1
set ::env(GLB_RT_TILES) 14
set ::env(GLB_RT_MAXLAYER) 5

set ::env(DIODE_INSERTION_STRATEGY) 4