update dv tests
diff --git a/openlane/user_proj/src/simpleuart.v b/openlane/user_proj/src/simpleuart.v
index 280f9b2..57d4a23 100644
--- a/openlane/user_proj/src/simpleuart.v
+++ b/openlane/user_proj/src/simpleuart.v
@@ -20,8 +20,8 @@
  *  SPDX-License-Identifier: ISC
  */
 
-module simpleuart_wb # (
-    parameter BASE_ADR = 32'h4000_1000,
+module simpleuartA_wb # (
+    parameter BASE_ADR = 32'h 2000_0000,
     parameter CLK_DIV = 8'h00,
     parameter DATA = 8'h04,
     parameter CONFIG = 8'h08
@@ -44,31 +44,31 @@
     input  ser_rx
 
 );
-    wire [31:0] simpleuart_reg_div_do;
-    wire [31:0] simpleuart_reg_dat_do;
-    wire [31:0] simpleuart_reg_cfg_do;
+    wire [31:0] simpleuartA_reg_div_do;
+    wire [31:0] simpleuartA_reg_dat_do;
+    wire [31:0] simpleuartA_reg_cfg_do;
     wire reg_dat_wait;
 
     wire resetn = ~wb_rst_i;
     wire valid = wb_stb_i && wb_cyc_i; 
-    wire simpleuart_reg_div_sel = valid && (wb_adr_i == (BASE_ADR | CLK_DIV));
-    wire simpleuart_reg_dat_sel = valid && (wb_adr_i == (BASE_ADR | DATA));
-    wire simpleuart_reg_cfg_sel = valid && (wb_adr_i == (BASE_ADR | CONFIG));
+    wire simpleuartA_reg_div_sel = valid && (wb_adr_i == (BASE_ADR | CLK_DIV));
+    wire simpleuartA_reg_dat_sel = valid && (wb_adr_i == (BASE_ADR | DATA));
+    wire simpleuartA_reg_cfg_sel = valid && (wb_adr_i == (BASE_ADR | CONFIG));
 
-    wire [3:0] reg_div_we = simpleuart_reg_div_sel ? (wb_sel_i & {4{wb_we_i}}): 4'b 0000; 
-    wire reg_dat_we = simpleuart_reg_dat_sel ? (wb_sel_i[0] & wb_we_i): 1'b 0;      // simpleuart_reg_dat_sel ? mem_wstrb[0] : 1'b 0
-    wire reg_cfg_we = simpleuart_reg_cfg_sel ? (wb_sel_i[0] & wb_we_i): 1'b 0; 
+    wire [3:0] reg_div_we = simpleuartA_reg_div_sel ? (wb_sel_i & {4{wb_we_i}}): 4'b 0000; 
+    wire reg_dat_we = simpleuartA_reg_dat_sel ? (wb_sel_i[0] & wb_we_i): 1'b 0;      // simpleuartA_reg_dat_sel ? mem_wstrb[0] : 1'b 0
+    wire reg_cfg_we = simpleuartA_reg_cfg_sel ? (wb_sel_i[0] & wb_we_i): 1'b 0; 
 
     wire [31:0] mem_wdata = wb_dat_i;
-    wire reg_dat_re = simpleuart_reg_dat_sel && !wb_sel_i && ~wb_we_i; // read_enable
+    wire reg_dat_re = simpleuartA_reg_dat_sel && !wb_sel_i && ~wb_we_i; // read_enable
 
-    assign wb_dat_o = simpleuart_reg_div_sel ? simpleuart_reg_div_do:
-		      simpleuart_reg_cfg_sel ? simpleuart_reg_cfg_do:
-					       simpleuart_reg_dat_do;
-    assign wb_ack_o = (simpleuart_reg_div_sel || simpleuart_reg_dat_sel
-			|| simpleuart_reg_cfg_sel) && (!reg_dat_wait);
+    assign wb_dat_o = simpleuartA_reg_div_sel ? simpleuartA_reg_div_do:
+		      simpleuartA_reg_cfg_sel ? simpleuartA_reg_cfg_do:
+					       simpleuartA_reg_dat_do;
+    assign wb_ack_o = (simpleuartA_reg_div_sel || simpleuartA_reg_dat_sel
+			|| simpleuartA_reg_cfg_sel) && (!reg_dat_wait);
     
-    simpleuart simpleuart (
+    simpleuartA simpleuartA (
         .clk    (wb_clk_i),
         .resetn (resetn),
 
@@ -78,22 +78,22 @@
 
         .reg_div_we  (reg_div_we), 
         .reg_div_di  (mem_wdata),
-        .reg_div_do  (simpleuart_reg_div_do),
+        .reg_div_do  (simpleuartA_reg_div_do),
 
         .reg_cfg_we  (reg_cfg_we), 
         .reg_cfg_di  (mem_wdata),
-        .reg_cfg_do  (simpleuart_reg_cfg_do),
+        .reg_cfg_do  (simpleuartA_reg_cfg_do),
 
         .reg_dat_we  (reg_dat_we),
         .reg_dat_re  (reg_dat_re),
         .reg_dat_di  (mem_wdata),
-        .reg_dat_do  (simpleuart_reg_dat_do),
+        .reg_dat_do  (simpleuartA_reg_dat_do),
         .reg_dat_wait(reg_dat_wait)
     );
 
 endmodule
 
-module simpleuart (
+module simpleuartA (
     input clk,
     input resetn,
 
diff --git a/openlane/user_proj/src/soc.v b/openlane/user_proj/src/soc.v
index c50d0ac..85c53b8 100644
--- a/openlane/user_proj/src/soc.v
+++ b/openlane/user_proj/src/soc.v
@@ -52,214 +52,12 @@
   output o_csb1_1
 );
 
-/***************************************************************************/
-// THE BASE ADDRESSES SHOULD MATCH yb_interconnect.yml
+`include "wb_interconnect.vh"
 parameter ROM_BASE_ADDRESS =    32'h3000_0000;
-parameter RAM_BASE_ADDRESS =    32'h3000_3000;
-parameter TIMER_BASE_ADDRESS =  32'h4000_0000;
-parameter UART_BASE_ADR =       32'h4000_1000;
-parameter LED_BASE_ADR =        32'h4000_2000;
-//`include "openlane_test/wb_interconnect.vh"
-// THIS FILE IS AUTOGENERATED BY wb_intercon_gen
-// ANY MANUAL CHANGES WILL BE LOST
-wire [31:0] wb_m2s_cpu0_ibus_adr;
-wire [31:0] wb_m2s_cpu0_ibus_dat;
-wire  [3:0] wb_m2s_cpu0_ibus_sel;
-wire        wb_m2s_cpu0_ibus_we;
-wire        wb_m2s_cpu0_ibus_cyc;
-wire        wb_m2s_cpu0_ibus_stb;
-wire  [2:0] wb_m2s_cpu0_ibus_cti;
-wire  [1:0] wb_m2s_cpu0_ibus_bte;
-wire [31:0] wb_s2m_cpu0_ibus_dat;
-wire        wb_s2m_cpu0_ibus_ack;
-wire        wb_s2m_cpu0_ibus_err;
-wire        wb_s2m_cpu0_ibus_rty;
-wire [31:0] wb_m2s_cpu0_dbus_adr;
-wire [31:0] wb_m2s_cpu0_dbus_dat;
-wire  [3:0] wb_m2s_cpu0_dbus_sel;
-wire        wb_m2s_cpu0_dbus_we;
-wire        wb_m2s_cpu0_dbus_cyc;
-wire        wb_m2s_cpu0_dbus_stb;
-wire  [2:0] wb_m2s_cpu0_dbus_cti;
-wire  [1:0] wb_m2s_cpu0_dbus_bte;
-wire [31:0] wb_s2m_cpu0_dbus_dat;
-wire        wb_s2m_cpu0_dbus_ack;
-wire        wb_s2m_cpu0_dbus_err;
-wire        wb_s2m_cpu0_dbus_rty;
-wire [31:0] wb_m2s_mgmt_adr;
-wire [31:0] wb_m2s_mgmt_dat;
-wire  [3:0] wb_m2s_mgmt_sel;
-wire        wb_m2s_mgmt_we;
-wire        wb_m2s_mgmt_cyc;
-wire        wb_m2s_mgmt_stb;
-wire  [2:0] wb_m2s_mgmt_cti;
-wire  [1:0] wb_m2s_mgmt_bte;
-wire [31:0] wb_s2m_mgmt_dat;
-wire        wb_s2m_mgmt_ack;
-wire        wb_s2m_mgmt_err;
-wire        wb_s2m_mgmt_rty;
-wire [31:0] wb_m2s_timer0_adr;
-wire [31:0] wb_m2s_timer0_dat;
-wire  [3:0] wb_m2s_timer0_sel;
-wire        wb_m2s_timer0_we;
-wire        wb_m2s_timer0_cyc;
-wire        wb_m2s_timer0_stb;
-wire  [2:0] wb_m2s_timer0_cti;
-wire  [1:0] wb_m2s_timer0_bte;
-wire [31:0] wb_s2m_timer0_dat;
-wire        wb_s2m_timer0_ack;
-wire        wb_s2m_timer0_err;
-wire        wb_s2m_timer0_rty;
-wire [31:0] wb_m2s_uart0_adr;
-wire [31:0] wb_m2s_uart0_dat;
-wire  [3:0] wb_m2s_uart0_sel;
-wire        wb_m2s_uart0_we;
-wire        wb_m2s_uart0_cyc;
-wire        wb_m2s_uart0_stb;
-wire  [2:0] wb_m2s_uart0_cti;
-wire  [1:0] wb_m2s_uart0_bte;
-wire [31:0] wb_s2m_uart0_dat;
-wire        wb_s2m_uart0_ack;
-wire        wb_s2m_uart0_err;
-wire        wb_s2m_uart0_rty;
-wire [31:0] wb_m2s_led0_adr;
-wire [31:0] wb_m2s_led0_dat;
-wire  [3:0] wb_m2s_led0_sel;
-wire        wb_m2s_led0_we;
-wire        wb_m2s_led0_cyc;
-wire        wb_m2s_led0_stb;
-wire  [2:0] wb_m2s_led0_cti;
-wire  [1:0] wb_m2s_led0_bte;
-wire [31:0] wb_s2m_led0_dat;
-wire        wb_s2m_led0_ack;
-wire        wb_s2m_led0_err;
-wire        wb_s2m_led0_rty;
-wire [31:0] wb_m2s_cpu0_rom_adr;
-wire [31:0] wb_m2s_cpu0_rom_dat;
-wire  [3:0] wb_m2s_cpu0_rom_sel;
-wire        wb_m2s_cpu0_rom_we;
-wire        wb_m2s_cpu0_rom_cyc;
-wire        wb_m2s_cpu0_rom_stb;
-wire  [2:0] wb_m2s_cpu0_rom_cti;
-wire  [1:0] wb_m2s_cpu0_rom_bte;
-wire [31:0] wb_s2m_cpu0_rom_dat;
-wire        wb_s2m_cpu0_rom_ack;
-wire        wb_s2m_cpu0_rom_err;
-wire        wb_s2m_cpu0_rom_rty;
-wire [31:0] wb_m2s_cpu0_ram_adr;
-wire [31:0] wb_m2s_cpu0_ram_dat;
-wire  [3:0] wb_m2s_cpu0_ram_sel;
-wire        wb_m2s_cpu0_ram_we;
-wire        wb_m2s_cpu0_ram_cyc;
-wire        wb_m2s_cpu0_ram_stb;
-wire  [2:0] wb_m2s_cpu0_ram_cti;
-wire  [1:0] wb_m2s_cpu0_ram_bte;
-wire [31:0] wb_s2m_cpu0_ram_dat;
-wire        wb_s2m_cpu0_ram_ack;
-wire        wb_s2m_cpu0_ram_err;
-wire        wb_s2m_cpu0_ram_rty;
-
-wb_interconnect wb_intercon0(
-  .wb_clk_i           (wb_clk),
-  .wb_rst_i           (wb_rst),
-  .wb_cpu0_ibus_adr_i (wb_m2s_cpu0_ibus_adr),
-  .wb_cpu0_ibus_dat_i (wb_m2s_cpu0_ibus_dat),
-  .wb_cpu0_ibus_sel_i (wb_m2s_cpu0_ibus_sel),
-  .wb_cpu0_ibus_we_i  (wb_m2s_cpu0_ibus_we),
-  .wb_cpu0_ibus_cyc_i (wb_m2s_cpu0_ibus_cyc),
-  .wb_cpu0_ibus_stb_i (wb_m2s_cpu0_ibus_stb),
-  .wb_cpu0_ibus_cti_i (wb_m2s_cpu0_ibus_cti),
-  .wb_cpu0_ibus_bte_i (wb_m2s_cpu0_ibus_bte),
-  .wb_cpu0_ibus_dat_o (wb_s2m_cpu0_ibus_dat),
-  .wb_cpu0_ibus_ack_o (wb_s2m_cpu0_ibus_ack),
-  .wb_cpu0_ibus_err_o (wb_s2m_cpu0_ibus_err),
-  .wb_cpu0_ibus_rty_o (wb_s2m_cpu0_ibus_rty),
-  .wb_cpu0_dbus_adr_i (wb_m2s_cpu0_dbus_adr),
-  .wb_cpu0_dbus_dat_i (wb_m2s_cpu0_dbus_dat),
-  .wb_cpu0_dbus_sel_i (wb_m2s_cpu0_dbus_sel),
-  .wb_cpu0_dbus_we_i  (wb_m2s_cpu0_dbus_we),
-  .wb_cpu0_dbus_cyc_i (wb_m2s_cpu0_dbus_cyc),
-  .wb_cpu0_dbus_stb_i (wb_m2s_cpu0_dbus_stb),
-  .wb_cpu0_dbus_cti_i (wb_m2s_cpu0_dbus_cti),
-  .wb_cpu0_dbus_bte_i (wb_m2s_cpu0_dbus_bte),
-  .wb_cpu0_dbus_dat_o (wb_s2m_cpu0_dbus_dat),
-  .wb_cpu0_dbus_ack_o (wb_s2m_cpu0_dbus_ack),
-  .wb_cpu0_dbus_err_o (wb_s2m_cpu0_dbus_err),
-  .wb_cpu0_dbus_rty_o (wb_s2m_cpu0_dbus_rty),
-  .wb_mgmt_adr_i      (wb_m2s_mgmt_adr),
-  .wb_mgmt_dat_i      (wb_m2s_mgmt_dat),
-  .wb_mgmt_sel_i      (wb_m2s_mgmt_sel),
-  .wb_mgmt_we_i       (wb_m2s_mgmt_we),
-  .wb_mgmt_cyc_i      (wb_m2s_mgmt_cyc),
-  .wb_mgmt_stb_i      (wb_m2s_mgmt_stb),
-  .wb_mgmt_cti_i      (wb_m2s_mgmt_cti),
-  .wb_mgmt_bte_i      (wb_m2s_mgmt_bte),
-  .wb_mgmt_dat_o      (wb_s2m_mgmt_dat),
-  .wb_mgmt_ack_o      (wb_s2m_mgmt_ack),
-  .wb_mgmt_err_o      (wb_s2m_mgmt_err),
-  .wb_mgmt_rty_o      (wb_s2m_mgmt_rty),
-  .wb_timer0_adr_o    (wb_m2s_timer0_adr),
-  .wb_timer0_dat_o    (wb_m2s_timer0_dat),
-  .wb_timer0_sel_o    (wb_m2s_timer0_sel),
-  .wb_timer0_we_o     (wb_m2s_timer0_we),
-  .wb_timer0_cyc_o    (wb_m2s_timer0_cyc),
-  .wb_timer0_stb_o    (wb_m2s_timer0_stb),
-  .wb_timer0_cti_o    (wb_m2s_timer0_cti),
-  .wb_timer0_bte_o    (wb_m2s_timer0_bte),
-  .wb_timer0_dat_i    (wb_s2m_timer0_dat),
-  .wb_timer0_ack_i    (wb_s2m_timer0_ack),
-  .wb_timer0_err_i    (wb_s2m_timer0_err),
-  .wb_timer0_rty_i    (wb_s2m_timer0_rty),
-  .wb_uart0_adr_o     (wb_m2s_uart0_adr),
-  .wb_uart0_dat_o     (wb_m2s_uart0_dat),
-  .wb_uart0_sel_o     (wb_m2s_uart0_sel),
-  .wb_uart0_we_o      (wb_m2s_uart0_we),
-  .wb_uart0_cyc_o     (wb_m2s_uart0_cyc),
-  .wb_uart0_stb_o     (wb_m2s_uart0_stb),
-  .wb_uart0_cti_o     (wb_m2s_uart0_cti),
-  .wb_uart0_bte_o     (wb_m2s_uart0_bte),
-  .wb_uart0_dat_i     (wb_s2m_uart0_dat),
-  .wb_uart0_ack_i     (wb_s2m_uart0_ack),
-  .wb_uart0_err_i     (wb_s2m_uart0_err),
-  .wb_uart0_rty_i     (wb_s2m_uart0_rty),
-  .wb_led0_adr_o      (wb_m2s_led0_adr),
-  .wb_led0_dat_o      (wb_m2s_led0_dat),
-  .wb_led0_sel_o      (wb_m2s_led0_sel),
-  .wb_led0_we_o       (wb_m2s_led0_we),
-  .wb_led0_cyc_o      (wb_m2s_led0_cyc),
-  .wb_led0_stb_o      (wb_m2s_led0_stb),
-  .wb_led0_cti_o      (wb_m2s_led0_cti),
-  .wb_led0_bte_o      (wb_m2s_led0_bte),
-  .wb_led0_dat_i      (wb_s2m_led0_dat),
-  .wb_led0_ack_i      (wb_s2m_led0_ack),
-  .wb_led0_err_i      (wb_s2m_led0_err),
-  .wb_led0_rty_i      (wb_s2m_led0_rty),
-  .wb_cpu0_rom_adr_o  (wb_m2s_cpu0_rom_adr),
-  .wb_cpu0_rom_dat_o  (wb_m2s_cpu0_rom_dat),
-  .wb_cpu0_rom_sel_o  (wb_m2s_cpu0_rom_sel),
-  .wb_cpu0_rom_we_o   (wb_m2s_cpu0_rom_we),
-  .wb_cpu0_rom_cyc_o  (wb_m2s_cpu0_rom_cyc),
-  .wb_cpu0_rom_stb_o  (wb_m2s_cpu0_rom_stb),
-  .wb_cpu0_rom_cti_o  (wb_m2s_cpu0_rom_cti),
-  .wb_cpu0_rom_bte_o  (wb_m2s_cpu0_rom_bte),
-  .wb_cpu0_rom_dat_i  (wb_s2m_cpu0_rom_dat),
-  .wb_cpu0_rom_ack_i  (wb_s2m_cpu0_rom_ack),
-  .wb_cpu0_rom_err_i  (wb_s2m_cpu0_rom_err),
-  .wb_cpu0_rom_rty_i  (wb_s2m_cpu0_rom_rty),
-  .wb_cpu0_ram_adr_o  (wb_m2s_cpu0_ram_adr),
-  .wb_cpu0_ram_dat_o  (wb_m2s_cpu0_ram_dat),
-  .wb_cpu0_ram_sel_o  (wb_m2s_cpu0_ram_sel),
-  .wb_cpu0_ram_we_o   (wb_m2s_cpu0_ram_we),
-  .wb_cpu0_ram_cyc_o  (wb_m2s_cpu0_ram_cyc),
-  .wb_cpu0_ram_stb_o  (wb_m2s_cpu0_ram_stb),
-  .wb_cpu0_ram_cti_o  (wb_m2s_cpu0_ram_cti),
-  .wb_cpu0_ram_bte_o  (wb_m2s_cpu0_ram_bte),
-  .wb_cpu0_ram_dat_i  (wb_s2m_cpu0_ram_dat),
-  .wb_cpu0_ram_ack_i  (wb_s2m_cpu0_ram_ack),
-  .wb_cpu0_ram_err_i  (wb_s2m_cpu0_ram_err),
-  .wb_cpu0_ram_rty_i  (wb_s2m_cpu0_ram_rty)
-);
-/***************************************************************************/
+parameter RAM_BASE_ADDRESS =    32'h3000_1000;
+parameter TIMER_BASE_ADDRESS =  32'h3fff_ff00;
+parameter UART_BASE_ADR =       32'h3fff_fe00;
+parameter LED_BASE_ADR =        32'h3fff_fd00;
 
 assign mprj_adr_o = wb_m2s_mgmt_adr;
 assign mprj_dat_o = wb_m2s_mgmt_dat;
@@ -397,7 +195,9 @@
 
 // Uart for console logging
 `ifndef USE_OBSOLETE_UART
-simpleuart_wb simpleuart (
+simpleuartA_wb #(
+  .BASE_ADR(UART_BASE_ADR)
+) simpleuartA0 (
   .wb_clk_i(wb_clk),
   .wb_rst_i(wb_rst),
   .wb_adr_i(wb_m2s_uart0_adr),      
diff --git a/openlane/user_proj/src/wb_interconnect.v b/openlane/user_proj/src/wb_interconnect.v
index 9bed0be..536e4dc 100644
--- a/openlane/user_proj/src/wb_interconnect.v
+++ b/openlane/user_proj/src/wb_interconnect.v
@@ -1,6 +1,6 @@
-// THIS FILE IS AUTOGENERATED BY wb_intercon_gen
+// THIS FILE IS AUTOGENERATED BY wb_interconA_gen
 // ANY MANUAL CHANGES WILL BE LOST
-module wb_interconnect
+module wb_interconA
    (input         wb_clk_i,
     input         wb_rst_i,
     input  [31:0] wb_cpu0_ibus_adr_i,
@@ -267,8 +267,8 @@
 
 wb_mux
   #(.num_slaves (5),
-    .MATCH_ADDR ({32'h30000000, 32'h30003000, 32'h40000000, 32'h40001000, 32'h40002000}),
-    .MATCH_MASK ({32'hfffff800, 32'hfffff800, 32'hfffff000, 32'hfffff000, 32'hfffff000}))
+    .MATCH_ADDR ({32'h30000000, 32'h30001000, 32'h3fffff00, 32'h3ffffe00, 32'h3ffffd00}),
+    .MATCH_MASK ({32'hfffff800, 32'hfffff800, 32'hffffff00, 32'hffffff00, 32'hffffff00}))
  wb_mux_cpu0_dbus
    (.wb_clk_i  (wb_clk_i),
     .wb_rst_i  (wb_rst_i),
@@ -299,8 +299,8 @@
 
 wb_mux
   #(.num_slaves (5),
-    .MATCH_ADDR ({32'h30000000, 32'h30003000, 32'h40000000, 32'h40001000, 32'h40002000}),
-    .MATCH_MASK ({32'hfffff800, 32'hfffff800, 32'hfffff000, 32'hfffff000, 32'hfffff000}))
+    .MATCH_ADDR ({32'h30000000, 32'h30001000, 32'h3fffff00, 32'h3ffffe00, 32'h3ffffd00}),
+    .MATCH_MASK ({32'hfffff800, 32'hfffff800, 32'hffffff00, 32'hffffff00, 32'hffffff00}))
  wb_mux_mgmt
    (.wb_clk_i  (wb_clk_i),
     .wb_rst_i  (wb_rst_i),
diff --git a/openlane/user_proj/src/wb_interconnect.vh b/openlane/user_proj/src/wb_interconnect.vh
new file mode 100644
index 0000000..f2b4261
--- /dev/null
+++ b/openlane/user_proj/src/wb_interconnect.vh
@@ -0,0 +1,199 @@
+// THIS FILE IS AUTOGENERATED BY wb_interconA_gen
+// ANY MANUAL CHANGES WILL BE LOST
+wire [31:0] wb_m2s_cpu0_ibus_adr;
+wire [31:0] wb_m2s_cpu0_ibus_dat;
+wire  [3:0] wb_m2s_cpu0_ibus_sel;
+wire        wb_m2s_cpu0_ibus_we;
+wire        wb_m2s_cpu0_ibus_cyc;
+wire        wb_m2s_cpu0_ibus_stb;
+wire  [2:0] wb_m2s_cpu0_ibus_cti;
+wire  [1:0] wb_m2s_cpu0_ibus_bte;
+wire [31:0] wb_s2m_cpu0_ibus_dat;
+wire        wb_s2m_cpu0_ibus_ack;
+wire        wb_s2m_cpu0_ibus_err;
+wire        wb_s2m_cpu0_ibus_rty;
+wire [31:0] wb_m2s_cpu0_dbus_adr;
+wire [31:0] wb_m2s_cpu0_dbus_dat;
+wire  [3:0] wb_m2s_cpu0_dbus_sel;
+wire        wb_m2s_cpu0_dbus_we;
+wire        wb_m2s_cpu0_dbus_cyc;
+wire        wb_m2s_cpu0_dbus_stb;
+wire  [2:0] wb_m2s_cpu0_dbus_cti;
+wire  [1:0] wb_m2s_cpu0_dbus_bte;
+wire [31:0] wb_s2m_cpu0_dbus_dat;
+wire        wb_s2m_cpu0_dbus_ack;
+wire        wb_s2m_cpu0_dbus_err;
+wire        wb_s2m_cpu0_dbus_rty;
+wire [31:0] wb_m2s_mgmt_adr;
+wire [31:0] wb_m2s_mgmt_dat;
+wire  [3:0] wb_m2s_mgmt_sel;
+wire        wb_m2s_mgmt_we;
+wire        wb_m2s_mgmt_cyc;
+wire        wb_m2s_mgmt_stb;
+wire  [2:0] wb_m2s_mgmt_cti;
+wire  [1:0] wb_m2s_mgmt_bte;
+wire [31:0] wb_s2m_mgmt_dat;
+wire        wb_s2m_mgmt_ack;
+wire        wb_s2m_mgmt_err;
+wire        wb_s2m_mgmt_rty;
+wire [31:0] wb_m2s_timer0_adr;
+wire [31:0] wb_m2s_timer0_dat;
+wire  [3:0] wb_m2s_timer0_sel;
+wire        wb_m2s_timer0_we;
+wire        wb_m2s_timer0_cyc;
+wire        wb_m2s_timer0_stb;
+wire  [2:0] wb_m2s_timer0_cti;
+wire  [1:0] wb_m2s_timer0_bte;
+wire [31:0] wb_s2m_timer0_dat;
+wire        wb_s2m_timer0_ack;
+wire        wb_s2m_timer0_err;
+wire        wb_s2m_timer0_rty;
+wire [31:0] wb_m2s_uart0_adr;
+wire [31:0] wb_m2s_uart0_dat;
+wire  [3:0] wb_m2s_uart0_sel;
+wire        wb_m2s_uart0_we;
+wire        wb_m2s_uart0_cyc;
+wire        wb_m2s_uart0_stb;
+wire  [2:0] wb_m2s_uart0_cti;
+wire  [1:0] wb_m2s_uart0_bte;
+wire [31:0] wb_s2m_uart0_dat;
+wire        wb_s2m_uart0_ack;
+wire        wb_s2m_uart0_err;
+wire        wb_s2m_uart0_rty;
+wire [31:0] wb_m2s_led0_adr;
+wire [31:0] wb_m2s_led0_dat;
+wire  [3:0] wb_m2s_led0_sel;
+wire        wb_m2s_led0_we;
+wire        wb_m2s_led0_cyc;
+wire        wb_m2s_led0_stb;
+wire  [2:0] wb_m2s_led0_cti;
+wire  [1:0] wb_m2s_led0_bte;
+wire [31:0] wb_s2m_led0_dat;
+wire        wb_s2m_led0_ack;
+wire        wb_s2m_led0_err;
+wire        wb_s2m_led0_rty;
+wire [31:0] wb_m2s_cpu0_rom_adr;
+wire [31:0] wb_m2s_cpu0_rom_dat;
+wire  [3:0] wb_m2s_cpu0_rom_sel;
+wire        wb_m2s_cpu0_rom_we;
+wire        wb_m2s_cpu0_rom_cyc;
+wire        wb_m2s_cpu0_rom_stb;
+wire  [2:0] wb_m2s_cpu0_rom_cti;
+wire  [1:0] wb_m2s_cpu0_rom_bte;
+wire [31:0] wb_s2m_cpu0_rom_dat;
+wire        wb_s2m_cpu0_rom_ack;
+wire        wb_s2m_cpu0_rom_err;
+wire        wb_s2m_cpu0_rom_rty;
+wire [31:0] wb_m2s_cpu0_ram_adr;
+wire [31:0] wb_m2s_cpu0_ram_dat;
+wire  [3:0] wb_m2s_cpu0_ram_sel;
+wire        wb_m2s_cpu0_ram_we;
+wire        wb_m2s_cpu0_ram_cyc;
+wire        wb_m2s_cpu0_ram_stb;
+wire  [2:0] wb_m2s_cpu0_ram_cti;
+wire  [1:0] wb_m2s_cpu0_ram_bte;
+wire [31:0] wb_s2m_cpu0_ram_dat;
+wire        wb_s2m_cpu0_ram_ack;
+wire        wb_s2m_cpu0_ram_err;
+wire        wb_s2m_cpu0_ram_rty;
+
+wb_interconA wb_interconA0
+   (.wb_clk_i           (wb_clk),
+    .wb_rst_i           (wb_rst),
+    .wb_cpu0_ibus_adr_i (wb_m2s_cpu0_ibus_adr),
+    .wb_cpu0_ibus_dat_i (wb_m2s_cpu0_ibus_dat),
+    .wb_cpu0_ibus_sel_i (wb_m2s_cpu0_ibus_sel),
+    .wb_cpu0_ibus_we_i  (wb_m2s_cpu0_ibus_we),
+    .wb_cpu0_ibus_cyc_i (wb_m2s_cpu0_ibus_cyc),
+    .wb_cpu0_ibus_stb_i (wb_m2s_cpu0_ibus_stb),
+    .wb_cpu0_ibus_cti_i (wb_m2s_cpu0_ibus_cti),
+    .wb_cpu0_ibus_bte_i (wb_m2s_cpu0_ibus_bte),
+    .wb_cpu0_ibus_dat_o (wb_s2m_cpu0_ibus_dat),
+    .wb_cpu0_ibus_ack_o (wb_s2m_cpu0_ibus_ack),
+    .wb_cpu0_ibus_err_o (wb_s2m_cpu0_ibus_err),
+    .wb_cpu0_ibus_rty_o (wb_s2m_cpu0_ibus_rty),
+    .wb_cpu0_dbus_adr_i (wb_m2s_cpu0_dbus_adr),
+    .wb_cpu0_dbus_dat_i (wb_m2s_cpu0_dbus_dat),
+    .wb_cpu0_dbus_sel_i (wb_m2s_cpu0_dbus_sel),
+    .wb_cpu0_dbus_we_i  (wb_m2s_cpu0_dbus_we),
+    .wb_cpu0_dbus_cyc_i (wb_m2s_cpu0_dbus_cyc),
+    .wb_cpu0_dbus_stb_i (wb_m2s_cpu0_dbus_stb),
+    .wb_cpu0_dbus_cti_i (wb_m2s_cpu0_dbus_cti),
+    .wb_cpu0_dbus_bte_i (wb_m2s_cpu0_dbus_bte),
+    .wb_cpu0_dbus_dat_o (wb_s2m_cpu0_dbus_dat),
+    .wb_cpu0_dbus_ack_o (wb_s2m_cpu0_dbus_ack),
+    .wb_cpu0_dbus_err_o (wb_s2m_cpu0_dbus_err),
+    .wb_cpu0_dbus_rty_o (wb_s2m_cpu0_dbus_rty),
+    .wb_mgmt_adr_i      (wb_m2s_mgmt_adr),
+    .wb_mgmt_dat_i      (wb_m2s_mgmt_dat),
+    .wb_mgmt_sel_i      (wb_m2s_mgmt_sel),
+    .wb_mgmt_we_i       (wb_m2s_mgmt_we),
+    .wb_mgmt_cyc_i      (wb_m2s_mgmt_cyc),
+    .wb_mgmt_stb_i      (wb_m2s_mgmt_stb),
+    .wb_mgmt_cti_i      (wb_m2s_mgmt_cti),
+    .wb_mgmt_bte_i      (wb_m2s_mgmt_bte),
+    .wb_mgmt_dat_o      (wb_s2m_mgmt_dat),
+    .wb_mgmt_ack_o      (wb_s2m_mgmt_ack),
+    .wb_mgmt_err_o      (wb_s2m_mgmt_err),
+    .wb_mgmt_rty_o      (wb_s2m_mgmt_rty),
+    .wb_timer0_adr_o    (wb_m2s_timer0_adr),
+    .wb_timer0_dat_o    (wb_m2s_timer0_dat),
+    .wb_timer0_sel_o    (wb_m2s_timer0_sel),
+    .wb_timer0_we_o     (wb_m2s_timer0_we),
+    .wb_timer0_cyc_o    (wb_m2s_timer0_cyc),
+    .wb_timer0_stb_o    (wb_m2s_timer0_stb),
+    .wb_timer0_cti_o    (wb_m2s_timer0_cti),
+    .wb_timer0_bte_o    (wb_m2s_timer0_bte),
+    .wb_timer0_dat_i    (wb_s2m_timer0_dat),
+    .wb_timer0_ack_i    (wb_s2m_timer0_ack),
+    .wb_timer0_err_i    (wb_s2m_timer0_err),
+    .wb_timer0_rty_i    (wb_s2m_timer0_rty),
+    .wb_uart0_adr_o     (wb_m2s_uart0_adr),
+    .wb_uart0_dat_o     (wb_m2s_uart0_dat),
+    .wb_uart0_sel_o     (wb_m2s_uart0_sel),
+    .wb_uart0_we_o      (wb_m2s_uart0_we),
+    .wb_uart0_cyc_o     (wb_m2s_uart0_cyc),
+    .wb_uart0_stb_o     (wb_m2s_uart0_stb),
+    .wb_uart0_cti_o     (wb_m2s_uart0_cti),
+    .wb_uart0_bte_o     (wb_m2s_uart0_bte),
+    .wb_uart0_dat_i     (wb_s2m_uart0_dat),
+    .wb_uart0_ack_i     (wb_s2m_uart0_ack),
+    .wb_uart0_err_i     (wb_s2m_uart0_err),
+    .wb_uart0_rty_i     (wb_s2m_uart0_rty),
+    .wb_led0_adr_o      (wb_m2s_led0_adr),
+    .wb_led0_dat_o      (wb_m2s_led0_dat),
+    .wb_led0_sel_o      (wb_m2s_led0_sel),
+    .wb_led0_we_o       (wb_m2s_led0_we),
+    .wb_led0_cyc_o      (wb_m2s_led0_cyc),
+    .wb_led0_stb_o      (wb_m2s_led0_stb),
+    .wb_led0_cti_o      (wb_m2s_led0_cti),
+    .wb_led0_bte_o      (wb_m2s_led0_bte),
+    .wb_led0_dat_i      (wb_s2m_led0_dat),
+    .wb_led0_ack_i      (wb_s2m_led0_ack),
+    .wb_led0_err_i      (wb_s2m_led0_err),
+    .wb_led0_rty_i      (wb_s2m_led0_rty),
+    .wb_cpu0_rom_adr_o  (wb_m2s_cpu0_rom_adr),
+    .wb_cpu0_rom_dat_o  (wb_m2s_cpu0_rom_dat),
+    .wb_cpu0_rom_sel_o  (wb_m2s_cpu0_rom_sel),
+    .wb_cpu0_rom_we_o   (wb_m2s_cpu0_rom_we),
+    .wb_cpu0_rom_cyc_o  (wb_m2s_cpu0_rom_cyc),
+    .wb_cpu0_rom_stb_o  (wb_m2s_cpu0_rom_stb),
+    .wb_cpu0_rom_cti_o  (wb_m2s_cpu0_rom_cti),
+    .wb_cpu0_rom_bte_o  (wb_m2s_cpu0_rom_bte),
+    .wb_cpu0_rom_dat_i  (wb_s2m_cpu0_rom_dat),
+    .wb_cpu0_rom_ack_i  (wb_s2m_cpu0_rom_ack),
+    .wb_cpu0_rom_err_i  (wb_s2m_cpu0_rom_err),
+    .wb_cpu0_rom_rty_i  (wb_s2m_cpu0_rom_rty),
+    .wb_cpu0_ram_adr_o  (wb_m2s_cpu0_ram_adr),
+    .wb_cpu0_ram_dat_o  (wb_m2s_cpu0_ram_dat),
+    .wb_cpu0_ram_sel_o  (wb_m2s_cpu0_ram_sel),
+    .wb_cpu0_ram_we_o   (wb_m2s_cpu0_ram_we),
+    .wb_cpu0_ram_cyc_o  (wb_m2s_cpu0_ram_cyc),
+    .wb_cpu0_ram_stb_o  (wb_m2s_cpu0_ram_stb),
+    .wb_cpu0_ram_cti_o  (wb_m2s_cpu0_ram_cti),
+    .wb_cpu0_ram_bte_o  (wb_m2s_cpu0_ram_bte),
+    .wb_cpu0_ram_dat_i  (wb_s2m_cpu0_ram_dat),
+    .wb_cpu0_ram_ack_i  (wb_s2m_cpu0_ram_ack),
+    .wb_cpu0_ram_err_i  (wb_s2m_cpu0_ram_err),
+    .wb_cpu0_ram_rty_i  (wb_s2m_cpu0_ram_rty));
+
diff --git a/openlane/user_proj/src/wb_led.v b/openlane/user_proj/src/wb_led.v
index cc0a93f..5755d18 100644
--- a/openlane/user_proj/src/wb_led.v
+++ b/openlane/user_proj/src/wb_led.v
@@ -24,16 +24,14 @@
 // Wishbone register addresses
 localparam
     wb_r_DATA  = 1'b0,
-    wb_r_SHIFT = 1'b1,
     wb_r_MAX   = 1'b1;
 
 // register
 reg [31:0] data;
-reg [5:0] shift;
 
 // output generation
 always @(posedge i_clk) begin
-    o_led <= data[shift];
+    o_led <= data[0];
 end
 
 // Since the incoming wishbone address from the CPU increments by 4 bytes, we
@@ -45,7 +43,6 @@
     if (i_reset) begin
         o_wb_ack <= 0;
         data <= 0;
-        shift <= 0;
     end else begin
         // Wishbone interface logic
         o_wb_ack <= 1'b0;
@@ -55,14 +52,12 @@
             // Register read
             case (register_index)
                 wb_r_DATA: o_wb_dat <= data;
-                wb_r_SHIFT:o_wb_dat <= shift;
             endcase
 
             // Register write
             if (i_wb_we) begin
                 case (register_index)
                     wb_r_DATA: data <= i_wb_dat;
-                    wb_r_SHIFT: shift <= i_wb_dat;
                 endcase
             end
         end
diff --git a/openlane/user_project_wrapper/config.tcl b/openlane/user_project_wrapper/config.tcl
index 3405326..ab66b5a 100755
--- a/openlane/user_project_wrapper/config.tcl
+++ b/openlane/user_project_wrapper/config.tcl
@@ -20,12 +20,12 @@
 set ::env(STD_CELL_LIBRARY) "sky130_fd_sc_hd"
 
 # YOU ARE NOT ALLOWED TO CHANGE ANY VARIABLES DEFINED IN THE FIXED WRAPPER CFGS 
-#source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper_empty/fixed_wrapper_cfgs.tcl
-source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper/fixed_wrapper_cfgs.tcl
+source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper_empty/fixed_wrapper_cfgs.tcl
+#source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper/fixed_wrapper_cfgs.tcl
 
 # YOU CAN CHANGE ANY VARIABLES DEFINED IN THE DEFAULT WRAPPER CFGS BY OVERRIDING THEM IN THIS CONFIG.TCL
-#source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper_empty/default_wrapper_cfgs.tcl
-source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper/default_wrapper_cfgs.tcl
+source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper_empty/default_wrapper_cfgs.tcl
+#source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper/default_wrapper_cfgs.tcl
 
 set script_dir [file dirname [file normalize [info script]]]
 
@@ -89,7 +89,8 @@
   met2 1100 2100 1783.1 2516.54, \
   met3 1100 2100 1783.1 2516.54, \
   met4 1100 2100 1783.1 2516.54"
-#set ::env(KLAYOUT_XOR_GDS) 0
+
+set ::env(KLAYOUT_XOR_GDS) 0
 
 set ::env(MACRO_PLACEMENT_CFG) $script_dir/macro.cfg
 
diff --git a/verilog/dv/Makefile b/verilog/dv/Makefile
index d87238f..668dd5b 100644
--- a/verilog/dv/Makefile
+++ b/verilog/dv/Makefile
@@ -19,7 +19,8 @@
 .SUFFIXES:
 .SILENT: clean all
 
-PATTERNS = io_ports la_test1 la_test2 wb_port mprj_stimulus
+#PATTERNS = io_ports la_test1 la_test2 wb_port mprj_stimulus
+PATTERNS = wb_leds
 
 all:  ${PATTERNS}
 	for i in ${PATTERNS}; do \
diff --git a/verilog/dv/io_ports/Makefile b/verilog/dv/io_ports/Makefile
index 5237a05..d186b06 100644
--- a/verilog/dv/io_ports/Makefile
+++ b/verilog/dv/io_ports/Makefile
@@ -50,7 +50,7 @@
 ifeq ($(SIM),RTL)
 	iverilog $(SIM_DEFINES) -I $(PDK_PATH) \
 	-I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
-	-I $(UPRJ_BEHAVIOURAL_MODELS)    -I $(UPRJ_RTL_PATH) \
+	-I $(UPRJ_BEHAVIOURAL_MODELS)    -I $(UPRJ_RTL_PATH) -I ../../../openlane/user_proj/src \
 	$< -o $@ 
 else  
 	iverilog $(SIM_DEFINES) -DGL -I $(PDK_PATH) \
diff --git a/verilog/dv/io_ports/io_ports_tb.v b/verilog/dv/io_ports/io_ports_tb.v
index f7628bc..020ab66 100644
--- a/verilog/dv/io_ports/io_ports_tb.v
+++ b/verilog/dv/io_ports/io_ports_tb.v
@@ -28,8 +28,8 @@
 	reg power1, power2;
 	reg power3, power4;
 
-    	wire gpio;
-    	wire [37:0] mprj_io;
+	wire gpio;
+	wire [37:0] mprj_io;
 	wire [7:0] mprj_io_0;
 
 	assign mprj_io_0 = mprj_io[7:0];
@@ -68,19 +68,19 @@
 	end
 
 	initial begin
-	    // Observe Output pins [7:0]
-	    wait(mprj_io_0 == 8'h01);
-	    wait(mprj_io_0 == 8'h02);
-	    wait(mprj_io_0 == 8'h03);
-    	    wait(mprj_io_0 == 8'h04);
-	    wait(mprj_io_0 == 8'h05);
-            wait(mprj_io_0 == 8'h06);
-	    wait(mprj_io_0 == 8'h07);
-            wait(mprj_io_0 == 8'h08);
-	    wait(mprj_io_0 == 8'h09);
-            wait(mprj_io_0 == 8'h0A);   
-	    wait(mprj_io_0 == 8'hFF);
-	    wait(mprj_io_0 == 8'h00);
+		// Observe Output pins [7:0]
+		wait(mprj_io_0 == 8'h01);
+		wait(mprj_io_0 == 8'h02);
+		wait(mprj_io_0 == 8'h03);
+		wait(mprj_io_0 == 8'h04);
+		wait(mprj_io_0 == 8'h05);
+		wait(mprj_io_0 == 8'h06);
+		wait(mprj_io_0 == 8'h07);
+		wait(mprj_io_0 == 8'h08);
+		wait(mprj_io_0 == 8'h09);
+		wait(mprj_io_0 == 8'h0A);
+		wait(mprj_io_0 == 8'hFF);
+		wait(mprj_io_0 == 8'h00);
 		
 		`ifdef GL
 	    	$display("Monitor: Test 1 Mega-Project IO (GL) Passed");
@@ -94,12 +94,12 @@
 		RSTB <= 1'b0;
 		CSB  <= 1'b1;		// Force CSB high
 		#2000;
-		RSTB <= 1'b1;	    	// Release reset
+		RSTB <= 1'b1;		// Release reset
 		#170000;
-		CSB = 1'b0;		// CSB can be released
+		CSB = 1'b0;			// CSB can be released
 	end
 
-	initial begin		// Power-up sequence
+	initial begin			// Power-up sequence
 		power1 <= 1'b0;
 		power2 <= 1'b0;
 		power3 <= 1'b0;
@@ -146,7 +146,7 @@
 		.vssd2	  (VSS),
 		.clock	  (clock),
 		.gpio     (gpio),
-        	.mprj_io  (mprj_io),
+		.mprj_io  (mprj_io),
 		.flash_csb(flash_csb),
 		.flash_clk(flash_clk),
 		.flash_io0(flash_io0),
diff --git a/verilog/dv/la_test1/Makefile b/verilog/dv/la_test1/Makefile
index ba979f7..bd2d8d0 100644
--- a/verilog/dv/la_test1/Makefile
+++ b/verilog/dv/la_test1/Makefile
@@ -50,7 +50,7 @@
 ifeq ($(SIM),RTL)
 	iverilog $(SIM_DEFINES) -I $(PDK_PATH) \
 	-I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
-	-I $(UPRJ_BEHAVIOURAL_MODELS)    -I $(UPRJ_RTL_PATH) \
+	-I $(UPRJ_BEHAVIOURAL_MODELS)    -I $(UPRJ_RTL_PATH) -I ../../../openlane/user_proj/src \
 	$< -o $@ 
 else  
 	iverilog $(SIM_DEFINES) -DGL -I $(PDK_PATH) \
diff --git a/verilog/dv/la_test1/la_test1_tb.v b/verilog/dv/la_test1/la_test1_tb.v
index 626e390..ae59b9a 100644
--- a/verilog/dv/la_test1/la_test1_tb.v
+++ b/verilog/dv/la_test1/la_test1_tb.v
@@ -24,14 +24,14 @@
 
 module la_test1_tb;
 	reg clock;
-    reg RSTB;
+	reg RSTB;
 	reg CSB;
 
 	reg power1, power2;
 
-    	wire gpio;
+	wire gpio;
 	wire uart_tx;
-    	wire [37:0] mprj_io;
+	wire [37:0] mprj_io;
 	wire [15:0] checkbits;
 
 	assign checkbits  = mprj_io[31:16];
@@ -40,7 +40,7 @@
 	always #12.5 clock <= (clock === 1'b0);
 
 	initial begin
-		clock = 0;
+	clock = 0;
 	end
 
 	assign mprj_io[3] = (CSB == 1'b1) ? 1'b1 : 1'bz;
@@ -91,13 +91,13 @@
 		power2 <= 1'b1;
 	end
 
-    	wire flash_csb;
+	wire flash_csb;
 	wire flash_clk;
 	wire flash_io0;
 	wire flash_io1;
 
 	wire VDD1V8;
-    	wire VDD3V3;
+	wire VDD3V3;
 	wire VSS;
     
 	assign VDD3V3 = power1;
@@ -121,7 +121,7 @@
 		.vssd2	  (VSS),
 		.clock	  (clock),
 		.gpio     (gpio),
-        	.mprj_io  (mprj_io),
+		.mprj_io  (mprj_io),
 		.flash_csb(flash_csb),
 		.flash_clk(flash_clk),
 		.flash_io0(flash_io0),
diff --git a/verilog/dv/la_test2/Makefile b/verilog/dv/la_test2/Makefile
index 0435500..a8af4c6 100644
--- a/verilog/dv/la_test2/Makefile
+++ b/verilog/dv/la_test2/Makefile
@@ -50,7 +50,7 @@
 ifeq ($(SIM),RTL)
 	iverilog $(SIM_DEFINES) -I $(PDK_PATH) \
 	-I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
-	-I $(UPRJ_BEHAVIOURAL_MODELS)    -I $(UPRJ_RTL_PATH) \
+	-I $(UPRJ_BEHAVIOURAL_MODELS)    -I $(UPRJ_RTL_PATH) -I ../../../openlane/user_proj/src \
 	$< -o $@ 
 else  
 	iverilog $(SIM_DEFINES) -DGL -I $(PDK_PATH) \
diff --git a/verilog/dv/la_test2/la_test2_tb.v b/verilog/dv/la_test2/la_test2_tb.v
index e09905e..ddbdf72 100644
--- a/verilog/dv/la_test2/la_test2_tb.v
+++ b/verilog/dv/la_test2/la_test2_tb.v
@@ -28,8 +28,8 @@
 
 	reg power1, power2;
 
-    	wire gpio;
-    	wire [37:0] mprj_io;
+	wire gpio;
+	wire [37:0] mprj_io;
 	wire [15:0] checkbits;
 
 	assign checkbits = mprj_io[31:16];
@@ -86,13 +86,13 @@
 		power2 <= 1'b1;
 	end
 
-    	wire flash_csb;
+	wire flash_csb;
 	wire flash_clk;
 	wire flash_io0;
 	wire flash_io1;
 
 	wire VDD1V8;
-    	wire VDD3V3;
+	wire VDD3V3;
 	wire VSS;
     
 	assign VDD3V3 = power1;
@@ -116,7 +116,7 @@
 		.vssd2	  (VSS),
 		.clock	  (clock),
 		.gpio     (gpio),
-        	.mprj_io  (mprj_io),
+		.mprj_io  (mprj_io),
 		.flash_csb(flash_csb),
 		.flash_clk(flash_clk),
 		.flash_io0(flash_io0),
diff --git a/verilog/dv/mprj_stimulus/Makefile b/verilog/dv/mprj_stimulus/Makefile
index b0e4051..e8af253 100644
--- a/verilog/dv/mprj_stimulus/Makefile
+++ b/verilog/dv/mprj_stimulus/Makefile
@@ -55,7 +55,7 @@
 ifeq ($(SIM),RTL)
 	iverilog $(SIM_DEFINES) -I $(PDK_PATH) \
 	-I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
-	-I $(UPRJ_BEHAVIOURAL_MODELS)    -I $(UPRJ_RTL_PATH) -I $(MGMT_SOC_RTL_PATH) \
+	-I $(UPRJ_BEHAVIOURAL_MODELS)    -I $(UPRJ_RTL_PATH) -I $(MGMT_SOC_RTL_PATH) -I ../../../openlane/user_proj/src \
 	$< -o $@ 
 else  
 	iverilog $(SIM_DEFINES) -DGL -I $(PDK_PATH) \
diff --git a/verilog/dv/mprj_stimulus/mprj_stimulus.c b/verilog/dv/mprj_stimulus/mprj_stimulus.c
index 7d2c29a..a8fca32 100644
--- a/verilog/dv/mprj_stimulus/mprj_stimulus.c
+++ b/verilog/dv/mprj_stimulus/mprj_stimulus.c
@@ -34,7 +34,7 @@
 
     uint32_t testval;
 
-    reg_hkspi_disable = 1;		// Shut off the housekeeping SPI,
+//    reg_hkspi_disable = 1;		// Shut off the housekeeping SPI,
 					// so we can use the pins.
 
     reg_mprj_datal = 0x00000000;
diff --git a/verilog/dv/wb_leds/.gitignore b/verilog/dv/wb_leds/.gitignore
new file mode 100644
index 0000000..5ca552f
--- /dev/null
+++ b/verilog/dv/wb_leds/.gitignore
@@ -0,0 +1,3 @@
+*hex
+*vcd
+*swp
diff --git a/verilog/dv/wb_leds/Makefile b/verilog/dv/wb_leds/Makefile
new file mode 100644
index 0000000..cc00101
--- /dev/null
+++ b/verilog/dv/wb_leds/Makefile
@@ -0,0 +1,79 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+## Caravel Pointers
+CARAVEL_ROOT ?= ../../../caravel
+CARAVEL_PATH ?= $(CARAVEL_ROOT)
+CARAVEL_FIRMWARE_PATH = $(CARAVEL_PATH)/verilog/dv/caravel
+CARAVEL_VERILOG_PATH  = $(CARAVEL_PATH)/verilog
+CARAVEL_RTL_PATH = $(CARAVEL_VERILOG_PATH)/rtl
+CARAVEL_BEHAVIOURAL_MODELS = $(CARAVEL_VERILOG_PATH)/dv/caravel
+
+## User Project Pointers
+UPRJ_VERILOG_PATH ?= ../../../verilog
+UPRJ_RTL_PATH = $(UPRJ_VERILOG_PATH)/rtl
+UPRJ_BEHAVIOURAL_MODELS = ../
+
+## RISCV GCC 
+PDK_ROOT?=/local/home/roman/projects/opencircuitdesign/shuttle4/pdks
+GCC_PATH?=/opt/xpack-riscv-none-embed-gcc/bin
+GCC_PREFIX?=riscv-none-embed
+PDK_PATH?=$(PDK_ROOT)/sky130A
+
+## Simulation mode: RTL/GL
+SIM?=RTL
+
+.SUFFIXES:
+
+PATTERN = wb_leds
+
+all:  ${PATTERN:=.vcd}
+
+hex:  ${PATTERN:=.hex}
+
+%.vvp: %_tb.v %.hex
+ifeq ($(SIM),RTL)
+	iverilog -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+	-I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
+	-I $(UPRJ_RTL_PATH) -I ../../../openlane/user_proj/src \
+	$< -o $@ 
+else  
+	iverilog -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
+	-I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) -I $(CARAVEL_VERILOG_PATH) \
+	-I $(UPRJ_BEHAVIOURAL_MODELS) -I$(UPRJ_RTL_PATH)   -I $(UPRJ_VERILOG_PATH) \
+	$< -o $@ 
+endif
+
+%.vcd: %.vvp
+	vvp $<
+
+%.elf: %.c $(CARAVEL_FIRMWARE_PATH)/sections.lds $(CARAVEL_FIRMWARE_PATH)/start.s
+	${GCC_PATH}/${GCC_PREFIX}-gcc -I $(CARAVEL_PATH) -march=rv32imc -mabi=ilp32 -Wl,-Bstatic,-T,$(CARAVEL_FIRMWARE_PATH)/sections.lds,--strip-debug -ffreestanding -nostdlib -o $@ $(CARAVEL_FIRMWARE_PATH)/start.s $<
+
+%.hex: %.elf
+	${GCC_PATH}/${GCC_PREFIX}-objcopy -O verilog $< $@ 
+	# to fix flash base address
+	sed -i 's/@10000000/@00000000/g' $@
+
+%.bin: %.elf
+	${GCC_PATH}/${GCC_PREFIX}-objcopy -O binary $< /dev/stdout | tail -c +1048577 > $@
+
+# ---- Clean ----
+
+clean:
+	rm -f *.elf *.hex *.bin *.vvp *.vcd *.log
+
+.PHONY: clean hex all
diff --git a/verilog/dv/wb_leds/wb_leds.c b/verilog/dv/wb_leds/wb_leds.c
new file mode 100644
index 0000000..a54786a
--- /dev/null
+++ b/verilog/dv/wb_leds/wb_leds.c
@@ -0,0 +1,89 @@
+/*
+ * SPDX-FileCopyrightText: 2020 Efabless Corporation
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+// This include is relative to $CARAVEL_PATH (see Makefile)
+#include "verilog/dv/caravel/defs.h"
+#include "verilog/dv/caravel/stub.c"
+
+/*
+	Wishbone Test:
+		- Configures MPRJ lower 8-IO pins as outputs
+		- Checks led value through the wishbone port
+*/
+
+#define reg_wb_leds (*(volatile uint32_t*)0x3ffffd00)
+
+void main()
+{
+
+	/* 
+	IO Control Registers
+	| DM     | VTRIP | SLOW  | AN_POL | AN_SEL | AN_EN | MOD_SEL | INP_DIS | HOLDH | OEB_N | MGMT_EN |
+	| 3-bits | 1-bit | 1-bit | 1-bit  | 1-bit  | 1-bit | 1-bit   | 1-bit   | 1-bit | 1-bit | 1-bit   |
+	Output: 0000_0110_0000_1110  (0x1808) = GPIO_MODE_USER_STD_OUTPUT
+	| DM     | VTRIP | SLOW  | AN_POL | AN_SEL | AN_EN | MOD_SEL | INP_DIS | HOLDH | OEB_N | MGMT_EN |
+	| 110    | 0     | 0     | 0      | 0      | 0     | 0       | 1       | 0     | 0     | 0       |
+	
+	 
+	Input: 0000_0001_0000_1111 (0x0402) = GPIO_MODE_USER_STD_INPUT_NOPULL
+	| DM     | VTRIP | SLOW  | AN_POL | AN_SEL | AN_EN | MOD_SEL | INP_DIS | HOLDH | OEB_N | MGMT_EN |
+	| 001    | 0     | 0     | 0      | 0      | 0     | 0       | 0       | 0     | 1     | 0       |
+	*/
+
+	/* Set up the housekeeping SPI to be connected internally so	*/
+	/* that external pin changes don't affect it.			*/
+
+	reg_spimaster_config = 0xa002;	// Enable, prescaler = 2,
+	// connect to housekeeping SPI
+	// Connect the housekeeping SPI to the SPI master
+	// so that the CSB line is not left floating.  This allows
+	// all of the GPIO pins to be used for user functions.
+
+    reg_mprj_io_31 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_30 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_29 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_28 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_27 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_26 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_25 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_24 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_23 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_22 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_21 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_20 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_19 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_18 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_17 = GPIO_MODE_MGMT_STD_OUTPUT;
+    reg_mprj_io_16 = GPIO_MODE_MGMT_STD_OUTPUT;
+
+	/* Apply configuration */
+	reg_mprj_xfer = 1;
+	while (reg_mprj_xfer == 1);
+
+	reg_la2_oenb = reg_la2_iena = 0xFFFFFFFF;    // [95:64]
+
+	// Flag start of the test
+	reg_mprj_datal = 0x00600000;
+
+	// set the led, signalling the end of the test
+	reg_wb_leds = 0xff;
+	if (reg_wb_leds == 0xff) {
+		reg_mprj_datal = 0x00610000;
+	} else {
+		reg_mprj_datal = 0x00600000;
+	}
+}
diff --git a/verilog/dv/wb_leds/wb_leds_tb.v b/verilog/dv/wb_leds/wb_leds_tb.v
new file mode 100644
index 0000000..0086f9f
--- /dev/null
+++ b/verilog/dv/wb_leds/wb_leds_tb.v
@@ -0,0 +1,165 @@
+// SPDX-FileCopyrightText: 2020 Efabless Corporation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+
+`default_nettype none
+
+`timescale 1 ns / 1 ps
+
+`include "uprj_netlists.v"
+`include "caravel_netlists.v"
+`include "spiflash.v"
+
+module wb_leds_tb;
+	reg clock;
+	reg RSTB;
+	reg CSB;
+	reg power1, power2;
+	reg power3, power4;
+
+	wire gpio;
+	wire [37:0] mprj_io;
+	wire led;
+	wire [7:0] checkbits;
+
+	assign checkbits = mprj_io[23:16];
+	assign led = mprj_io[25];
+
+	assign mprj_io[3] = (CSB == 1'b1) ? 1'b1 : 1'bz;
+
+	// External clock is used by default.  Make this artificially fast for the
+	// simulation.  Normally this would be a slow clock and the digital PLL
+	// would be the fast clock.
+
+	always #12.5 clock <= (clock === 1'b0);
+
+	initial begin
+		clock = 0;
+	end
+
+	initial begin
+		$dumpfile("wb_leds.vcd");
+		$dumpvars(0, wb_leds_tb);
+
+		// Repeat cycles of 1000 clock edges as needed to complete testbench
+		repeat (30) begin
+			repeat (1000) @(posedge clock);
+			// $display("+1000 cycles");
+		end
+		$display("%c[1;31m",27);
+		`ifdef GL
+			$display ("Monitor: Timeout, Test Mega-Project IO Ports (GL) Failed");
+		`else
+			$display ("Monitor: Timeout, Test Mega-Project IO Ports (RTL) Failed");
+		`endif
+		$display("%c[0m",27);
+		$finish;
+	end
+
+	initial begin
+		wait(checkbits == 8'h 60);
+		$display("Monitor: MPRJ-Logic WB Started");
+		wait(checkbits == 8'h 61);
+
+		// wait for leds to get set
+		wait(led == 1'b0);
+		$display("Monitor: LED=0");
+		wait(led == 1'b1);
+		$display("Monitor: LED=1");
+
+		`ifdef GL
+	    	$display("Monitor: Test 1 Mega-Project IO (GL) Passed");
+		`else
+		    $display("Monitor: Test 1 Mega-Project IO (RTL) Passed");
+		`endif
+	    $finish;
+	end
+
+	initial begin
+		RSTB <= 1'b0;
+		CSB  <= 1'b1;		// Force CSB high
+		#2000;
+		RSTB <= 1'b1;	    	// Release reset
+		#170000;
+		CSB = 1'b0;		// CSB can be released
+	end
+
+	initial begin		// Power-up sequence
+		power1 <= 1'b0;
+		power2 <= 1'b0;
+		power3 <= 1'b0;
+		power4 <= 1'b0;
+		#100;
+		power1 <= 1'b1;
+		#100;
+		power2 <= 1'b1;
+		#100;
+		power3 <= 1'b1;
+		#100;
+		power4 <= 1'b1;
+	end
+
+	always @(mprj_io) begin
+		#1 $display("MPRJ-IO state = %b ", mprj_io[7:0]);
+	end
+
+	wire flash_csb;
+	wire flash_clk;
+	wire flash_io0;
+	wire flash_io1;
+
+	wire VDD3V3 = power1;
+	wire VDD1V8 = power2;
+	wire USER_VDD3V3 = power3;
+	wire USER_VDD1V8 = power4;
+	wire VSS = 1'b0;
+
+	caravel uut (
+		.vddio	  (VDD3V3),
+		.vssio	  (VSS),
+		.vdda	  (VDD3V3),
+		.vssa	  (VSS),
+		.vccd	  (VDD1V8),
+		.vssd	  (VSS),
+		.vdda1    (USER_VDD3V3),
+		.vdda2    (USER_VDD3V3),
+		.vssa1	  (VSS),
+		.vssa2	  (VSS),
+		.vccd1	  (USER_VDD1V8),
+		.vccd2	  (USER_VDD1V8),
+		.vssd1	  (VSS),
+		.vssd2	  (VSS),
+		.clock	  (clock),
+		.gpio     (gpio),
+		.mprj_io  (mprj_io),
+		.flash_csb(flash_csb),
+		.flash_clk(flash_clk),
+		.flash_io0(flash_io0),
+		.flash_io1(flash_io1),
+		.resetb	  (RSTB)
+	);
+
+	spiflash #(
+		.FILENAME("wb_leds.hex")
+	) spiflash (
+		.csb(flash_csb),
+		.clk(flash_clk),
+		.io0(flash_io0),
+		.io1(flash_io1),
+		.io2(),			// not used
+		.io3()			// not used
+	);
+
+endmodule
+`default_nettype wire
\ No newline at end of file
diff --git a/verilog/dv/wb_port/Makefile b/verilog/dv/wb_port/Makefile
index 1c784c6..f749903 100644
--- a/verilog/dv/wb_port/Makefile
+++ b/verilog/dv/wb_port/Makefile
@@ -50,7 +50,7 @@
 ifeq ($(SIM),RTL)
 	iverilog $(SIM_DEFINES) -I $(PDK_PATH) \
 	-I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
-	-I $(UPRJ_BEHAVIOURAL_MODELS)    -I $(UPRJ_RTL_PATH) \
+	-I $(UPRJ_BEHAVIOURAL_MODELS)    -I $(UPRJ_RTL_PATH) -I ../../../openlane/user_proj/src \
 	$< -o $@ 
 else  
 	iverilog $(SIM_DEFINES) -DGL -I $(PDK_PATH) \
diff --git a/verilog/dv/wb_port/wb_port_tb.v b/verilog/dv/wb_port/wb_port_tb.v
index b32f900..46e13bc 100644
--- a/verilog/dv/wb_port/wb_port_tb.v
+++ b/verilog/dv/wb_port/wb_port_tb.v
@@ -67,7 +67,7 @@
 	end
 
 	initial begin
-	   wait(checkbits == 16'h AB60);
+		wait(checkbits == 16'h AB60);
 		$display("Monitor: MPRJ-Logic WB Started");
 		wait(checkbits == 16'h AB61);
 		`ifdef GL
@@ -134,7 +134,7 @@
 		.vssd2	  (VSS),
 		.clock	  (clock),
 		.gpio     (gpio),
-        .mprj_io  (mprj_io),
+		.mprj_io  (mprj_io),
 		.flash_csb(flash_csb),
 		.flash_clk(flash_clk),
 		.flash_io0(flash_io0),
diff --git a/verilog/rtl/uprj_netlists.v b/verilog/rtl/uprj_netlists.v
index 6e09a5d..17dd6d2 100644
--- a/verilog/rtl/uprj_netlists.v
+++ b/verilog/rtl/uprj_netlists.v
@@ -33,8 +33,8 @@
     `include "../../../openlane/user_proj/src/wb_arbiter.v"
     `include "../../../openlane/user_proj/src/wb_mux.v"
     `include "../../../openlane/user_proj/src/wb_interconnect.v"
-//    `include "../../../openlane/user_proj/src/simpleuart.v"
     `include "../../../openlane/user_proj/src/wb_openram_wrapper.v"
     `include "../../../openlane/user_proj/src/wb_led.v"
     `include "../../../openlane/user_proj/src/timer_wb.v"
+    `include "../../../openlane/user_proj/src/simpleuart.v"
 `endif
diff --git a/verilog/rtl/user_project_wrapper.v b/verilog/rtl/user_project_wrapper.v
deleted file mode 100644
index ffde4f1..0000000
--- a/verilog/rtl/user_project_wrapper.v
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-FileCopyrightText: 2020 Efabless Corporation
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-//      http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-// SPDX-License-Identifier: Apache-2.0
-
-`default_nettype none
-/*
- *-------------------------------------------------------------
- *
- * user_project_wrapper
- *
- * This wrapper enumerates all of the pins available to the
- * user for the user project.
- *
- * An example user project is provided in this wrapper.  The
- * example should be removed and replaced with the actual
- * user project.
- *
- *-------------------------------------------------------------
- */
-
-module user_project_wrapper #(
-    parameter BITS = 32
-) (
-`ifdef USE_POWER_PINS
-    inout vdda1,	// User area 1 3.3V supply
-    inout vdda2,	// User area 2 3.3V supply
-    inout vssa1,	// User area 1 analog ground
-    inout vssa2,	// User area 2 analog ground
-    inout vccd1,	// User area 1 1.8V supply
-    inout vccd2,	// User area 2 1.8v supply
-    inout vssd1,	// User area 1 digital ground
-    inout vssd2,	// User area 2 digital ground
-`endif
-
-    // Wishbone Slave ports (WB MI A)
-    input wb_clk_i,
-    input wb_rst_i,
-    input wbs_stb_i,
-    input wbs_cyc_i,
-    input wbs_we_i,
-    input [3:0] wbs_sel_i,
-    input [31:0] wbs_dat_i,
-    input [31:0] wbs_adr_i,
-    output wbs_ack_o,
-    output [31:0] wbs_dat_o,
-
-    // Logic Analyzer Signals
-    input  [127:0] la_data_in,
-    output [127:0] la_data_out,
-    input  [127:0] la_oenb,
-
-    // IOs
-    input  [`MPRJ_IO_PADS-1:0] io_in,
-    output [`MPRJ_IO_PADS-1:0] io_out,
-    output [`MPRJ_IO_PADS-1:0] io_oeb,
-
-    // Analog (direct connection to GPIO pad---use with caution)
-    // Note that analog I/O is not available on the 7 lowest-numbered
-    // GPIO pads, and so the analog_io indexing is offset from the
-    // GPIO indexing by 7 (also upper 2 GPIOs do not have analog_io).
-    inout [`MPRJ_IO_PADS-10:0] analog_io,
-
-    // Independent clock (on independent integer divider)
-    input   user_clock2,
-
-    // User maskable interrupt signals
-    output [2:0] user_irq
-);
-
-/*--------------------------------------*/
-/* User project is instantiated  here   */
-/*--------------------------------------*/
-
-user_proj mprj (
-`ifdef USE_POWER_PINS
-	.vccd1(vccd1),	// User area 1 1.8V power
-	.vssd1(vssd1),	// User area 1 digital ground
-`endif
-
-    .wb_clk_i(wb_clk_i),
-    .wb_rst_i(wb_rst_i),
-
-    // MGMT SoC Wishbone Slave
-
-    .wbs_cyc_i(wbs_cyc_i),
-    .wbs_stb_i(wbs_stb_i),
-    .wbs_we_i(wbs_we_i),
-    .wbs_sel_i(wbs_sel_i),
-    .wbs_adr_i(wbs_adr_i),
-    .wbs_dat_i(wbs_dat_i),
-    .wbs_ack_o(wbs_ack_o),
-    .wbs_dat_o(wbs_dat_o),
-
-    // Logic Analyzer
-
-    .la_data_in(la_data_in),
-    .la_data_out(la_data_out),
-    .la_oenb (la_oenb),
-
-    // IO Pads
-
-    .io_in (io_in),
-    .io_out(io_out),
-    .io_oeb(io_oeb),
-
-    // IRQ
-    .irq(user_irq)
-);
-
-endmodule	// user_project_wrapper
-
-`default_nettype wire