blob: 802900321677f092a27288e836412894f1258a5a [file] [log] [blame]
# SPDX-FileCopyrightText: 2020 Efabless Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# SPDX-License-Identifier: Apache-2.0
# Base Configurations. Don't Touch
# section begin
set ::env(PDK) "sky130A"
set ::env(STD_CELL_LIBRARY) "sky130_fd_sc_hd"
# YOU ARE NOT ALLOWED TO CHANGE ANY VARIABLES DEFINED IN THE FIXED WRAPPER CFGS
#source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper_empty/fixed_wrapper_cfgs.tcl
source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper/fixed_wrapper_cfgs.tcl
# YOU CAN CHANGE ANY VARIABLES DEFINED IN THE DEFAULT WRAPPER CFGS BY OVERRIDING THEM IN THIS CONFIG.TCL
#source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper_empty/default_wrapper_cfgs.tcl
source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper/default_wrapper_cfgs.tcl
set script_dir [file dirname [file normalize [info script]]]
set ::env(DESIGN_NAME) user_project_wrapper
#section end
######################################################
# User Configurations
## Source Verilog Files
set ::env(VERILOG_FILES) "\
$::env(CARAVEL_ROOT)/verilog/rtl/defines.v \
$script_dir/src/user_project_wrapper.v"
### Black-box verilog and views
set ::env(VERILOG_FILES_BLACKBOX) "\
$::env(CARAVEL_ROOT)/verilog/rtl/defines.v \
$script_dir/../user_proj/src/user_proj.v \
$script_dir/src/sky130_sram_2kbyte_1rw1r_32x512_8.v"
set ::env(EXTRA_LEFS) "\
$script_dir/../../lef/user_proj.lef \
$script_dir/src/sky130_sram_2kbyte_1rw1r_32x512_8.lef"
#set ::env(EXTRA_LEFS) "\
$script_dir/../user_proj/runs/user_proj/results/final/lef/user_proj.lef \
$script_dir/src/sky130_sram_2kbyte_1rw1r_32x512_8.lef"
set ::env(EXTRA_GDS_FILES) "\
$script_dir/../../gds/user_proj.gds \
$script_dir/src/sky130_sram_2kbyte_1rw1r_32x512_8.gds"
set ::env(EXTRA_GDS_FILES) "\
$script_dir/../user_proj/runs/user_proj/results/final/gds/user_proj.gds \
$script_dir/src/sky130_sram_2kbyte_1rw1r_32x512_8.gds"
#set ::env(EXTRA_LIBS) "\
$script_dir/src/sky130_sram_2kbyte_1rw1r_32x512_8_TT_1p8V_25C.lib"
#set ::env(CELL_PAD) 4
## Clock configurations
set ::env(CLOCK_PORT) "wb_clk_i"
set ::env(CLOCK_PERIOD) 20
set ::env(CLOCK_TREE_SYNTH) 0
set ::env(DIODE_INSERTION_STRATEGY) 0
set ::env(FILL_INSERTION) 0
# disable pdn check nodes becuase it hangs with multiple power domains.
# any issue with pdn connections will be flagged with LVS so it is not a critical check.
#if FP_SIZING is relative use FP_CORE_UTIL
set ::env(FP_CORE_UTIL) 15
set ::env(FP_PDN_CHECK_NODES) 0
set ::env(FP_PDN_ENABLE_RAILS) 0
set ::env(FP_PDN_MACRO_HOOKS) " \
mprj vccd1 vssd1 \
sram vccd1 vssd1 \
sram1 vccd1 vssd1"
#set ::env(FP_PDN_ENABLE_MACROS_GRID) 1
#set ::env(FP_PDN_ENABLE_GLOBAL_CONNECTIONS) 1
#set ::env(FP_PDN_IRDROP) 0
#set ::env(GLB_RT_ALLOW_CONGESTION) 1
set ::env(GLB_RT_MAXLAYER) 5
#set ::env(GLB_RESIZER_TIMING_OPTIMIZATIONS) 0
#set ::env(GLB_RT_ADJUSTMENT) 0.1
#set ::env(GLB_RT_L2_ADJUSTMENT) 0.9
#set ::env(GLB_RT_L3_ADJUSTMENT) 0.7
#set ::env(GLB_RT_L4_ADJUSTMENT) 0.20
#set ::env(GLB_RT_OBS) " \
li1 0 0 2920 3520"
#set ::env(GLB_RT_OBS) " \
li1 0 0 2920 3520, \
met1 300 300 1800 1800, \
met2 300 300 1800 1800, \
met3 300 300 1800 1800, \
met4 300 300 1800 1800, \
met5 300 300 1800 1800"
set ::env(GLB_RT_OBS) " \
li1 0 0 2920 3520, \
met1 300 300 1300 1300, \
met1 300 2100 983.1 2516.54, \
met1 1100 2100 1783.1 2516.54"
#set ::env(KLAYOUT_XOR_GDS) 0
### Macro Placement
set ::env(MACRO_PLACEMENT_CFG) $script_dir/macro.cfg
set ::env(MAGIC_DRC_USE_GDS) 0
set ::env(PL_TARGET_DENSITY) [ expr ($::env(FP_CORE_UTIL)+5) / 100.0 ]
set ::env(PL_RANDOM_GLB_PLACEMENT) 1
set ::env(PL_RESIZER_DESIGN_OPTIMIZATIONS) 0
set ::env(PL_RESIZER_TIMING_OPTIMIZATIONS) 0
set ::env(PL_RESIZER_BUFFER_INPUT_PORTS) 0
set ::env(PL_RESIZER_BUFFER_OUTPUT_PORTS) 0
set ::env(QUIT_ON_HOLD_VIOLATIONS) 0
set ::env(QUIT_ON_TIMING_VIOLATIONS) 0
set ::env(QUIT_ON_SLEW_VIOLATIONS) 0
set ::env(QUIT_ON_MAGIC_DRC) 0
set ::env(QUIT_ON_TR_DRC) 0
set ::env(QUIT_ON_LVS_ERROR) 0
set ::env(QUIT_ON_NEGATIVE_WNS) 0
set ::env(ROUTING_CORES) 8
#set ::env(ROUTING_OPT_ITERS) 8
set ::env(RT_MAX_LAYER) "met4"
set ::env(RUN_KLAYOUT_DRC) 0
set ::env(RUN_MAGIC_DRC) 0
# The following is because there are no std cells in the example wrapper project.
set ::env(SYNTH_TOP_LEVEL) 1
#set ::env(SYNTH_MAX_FANOUT) 4
set ::env(SYNTH_READ_BLACKBOX_LIB) 1
#set ::env(SYNTH_DRIVING_CELL) "sky130_fd_sc_hd__inv_8"
set ::env(TAP_DECAP_INSERTION) 0