| # SPDX-FileCopyrightText: 2021 , Dinesh Annayya |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # SPDX-License-Identifier: Apache-2.0 |
| # SPDX-FileContributor: Modified by Dinesh Annayya <dinesha@opencores.org> |
| |
| # Global |
| # ------ |
| |
| set script_dir [file dirname [file normalize [info script]]] |
| # Name |
| set ::env(DESIGN_NAME) wb_interconnect |
| |
| |
| set ::env(DESIGN_IS_CORE) "0" |
| set ::env(FP_PDN_CORE_RING) "0" |
| |
| # Timing configuration |
| set ::env(CLOCK_PERIOD) "10" |
| set ::env(CLOCK_PORT) "clk_i" |
| |
| set ::env(SYNTH_MAX_FANOUT) 4 |
| |
| # Sources |
| # ------- |
| |
| # Local sources + no2usb sources |
| set ::env(VERILOG_FILES) "\ |
| $script_dir/../../verilog/rtl/clk_skew_adjust/src/clk_skew_adjust.gv \ |
| $script_dir/../../verilog/rtl/lib/wb_stagging.sv \ |
| $script_dir/../../verilog/rtl/wb_interconnect/src/wb_interconnect.sv \ |
| " |
| |
| set ::env(SYNTH_READ_BLACKBOX_LIB) 1 |
| set ::env(SDC_FILE) "$script_dir/base.sdc" |
| set ::env(BASE_SDC_FILE) "$script_dir/base.sdc" |
| |
| set ::env(LEC_ENABLE) 0 |
| |
| set ::env(VDD_PIN) [list {vccd1}] |
| set ::env(GND_PIN) [list {vssd1}] |
| |
| |
| # Floorplanning |
| # ------------- |
| |
| set ::env(FP_PIN_ORDER_CFG) $::env(DESIGN_DIR)/pin_order.cfg |
| |
| set ::env(FP_SIZING) absolute |
| set ::env(DIE_AREA) "0 0 150 2200" |
| |
| |
| # If you're going to use multiple power domains, then keep this disabled. |
| set ::env(RUN_CVC) 0 |
| |
| #set ::env(PDN_CFG) $script_dir/pdn.tcl |
| |
| |
| set ::env(PL_TIME_DRIVEN) 1 |
| set ::env(FP_CORE_UTIL) "50" |
| set ::env(PL_TARGET_DENSITY) "0.50" |
| |
| # helps in anteena fix |
| set ::env(USE_ARC_ANTENNA_CHECK) "0" |
| |
| set ::env(FP_IO_VEXTEND) 4 |
| set ::env(FP_IO_HEXTEND) 4 |
| |
| set ::env(FP_PDN_VPITCH) 100 |
| set ::env(FP_PDN_HPITCH) 100 |
| set ::env(FP_PDN_VWIDTH) 5 |
| set ::env(FP_PDN_HWIDTH) 5 |
| |
| set ::env(GLB_RT_MAXLAYER) 5 |
| set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 10 |
| set ::env(DIODE_INSERTION_STRATEGY) 4 |
| |
| |
| set ::env(QUIT_ON_TIMING_VIOLATIONS) "0" |
| set ::env(QUIT_ON_MAGIC_DRC) "1" |
| set ::env(QUIT_ON_LVS_ERROR) "0" |
| set ::env(QUIT_ON_SLEW_VIOLATIONS) "0" |
| |
| set ::env(GLB_RESIZER_TIMING_OPTIMIZATIONS) "0" |
| set ::env(PL_RESIZER_BUFFER_INPUT_PORTS) "0" |
| set ::env(PL_RESIZER_BUFFER_OUTPUT_PORTS) "0" |
| |