blob: f9bfc18cf1e8bfda86e8428fb6bee1d70a7c95e6 [file] [log] [blame]
# SPDX-FileCopyrightText: 2020 Efabless Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# SPDX-License-Identifier: Apache-2.0
set script_dir [file dirname [file normalize [info script]]]
set ::env(DESIGN_NAME) memory
set ::env(VERILOG_FILES) "\
$script_dir/../../verilog/rtl/elpis/definitions.v \
$script_dir/../../verilog/rtl/elpis/memory.v "
set ::env(DESIGN_IS_CORE) 0
set ::env(CLOCK_PORT) "wb_clk_i"
set ::env(CLOCK_NET) "clk"
set ::env(CLOCK_PERIOD) "50"
set ::env(FP_SIZING) absolute
set ::env(DIE_AREA) "0 0 2000 2000"
set ::env(FP_PIN_ORDER_CFG) $script_dir/pin_order.cfg
#set ::env(PL_BASIC_PLACEMENT) 1
set ::env(PL_TARGET_DENSITY) 0.42
set ::env(FP_CORE_UTIL) "50"
#set ::env(GLB_RESIZER_TIMING_OPTIMIZATIONS) 0
# Maximum layer used for routing is metal 4.
# This is because this macro will be inserted in a top level (user_project_wrapper)
# where the PDN is planned on metal 5. So, to avoid having shorts between routes
# in this macro and the top level metal 5 stripes, we have to restrict routes to metal4.
set ::env(GLB_RT_MAXLAYER) 5
#set ::env(MACRO_PLACEMENT_CFG) $script_dir/macro.cfg
#set ::env(VERILOG_FILES_BLACKBOX) "\
# $script_dir/../../verilog/rtl/elpis/sram_32_1024_sky130.v"
#set ::env(EXTRA_LEFS) "\
# $script_dir/../../lef/sram_32_1024_sky130.lef"
#set ::env(EXTRA_GDS_FILES) "\
# $script_dir/../../gds/sram_32_1024_sky130.gds"
# You can draw more power domains if you need to
set ::env(VDD_NETS) [list {vccd1}]
set ::env(GND_NETS) [list {vssd1}]
set ::env(DIODE_INSERTION_STRATEGY) 4
# If you're going to use multiple power domains, then disable cvc run.
set ::env(RUN_CVC) 1
set ::env(ROUTING_CORES) 6