verilog/dv/jacaranda_test/jacaranda_test.c

/*
 * SPDX-FileCopyrightText: 2020 Efabless Corporation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 * SPDX-License-Identifier: Apache-2.0
 */

// This include is relative to $CARAVEL_PATH (see Makefile)
#include "verilog/dv/caravel/defs.h"
#include "verilog/dv/caravel/stub.c"


// --------------------------------------------------------
//

#define BASE_ADDR 0x30000000
#define IMEM_WRITE BASE_ADDR
#define UART_CLK_FREQ BASE_ADDR + 0x4

static void
write(uint32_t addr, uint32_t val)
{
    *(volatile uint32_t *)addr = val;
}

void
reset()
{
    reg_mprj_io_37 = GPIO_MODE_MGMT_STD_OUTPUT;
    reg_la0_iena = 0;
    reg_la0_oenb = 0;

    reg_la0_data = 0;
    reg_mprj_xfer = 1;
    while (reg_mprj_xfer == 1);
}

void
main()
{
    #include "instr.c"
    reg_spimaster_config = 0xa002;

    reset();

    // set reset to high
	reg_la0_data = 1;

    // set uart clk frequency
    write(UART_CLK_FREQ, 40000000);

    for(int i = 0; i < 29; ++i) {
        write(IMEM_WRITE, i << 8 | mem[i]);
    }

//    reg_la0_data = 1 << 16 | 0x00 << 8 | 0b11000000; // ldih 0  0xC0
//    reg_la0_data = 1 << 16 | 0x01 << 8 | 0b11010000; // ldil 0  0xD0
//    reg_la0_data = 1 << 16 | 0x02 << 8 | 0b10110011; // jmp r3  0xB3

    reg_la0_data = 0;

    while(1) {}
}