blob: cb6aebb082e257e07618a702673e310d75521224 [file] [log] [blame]
# SPDX-FileCopyrightText: 2021 , Dinesh Annayya
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# SPDX-License-Identifier: Apache-2.0
# SPDX-FileContributor: Modified by Dinesh Annayya <dinesha@opencores.org>
set ::env(LIB_FASTEST) "$::env(PDK_ROOT)/sky130A/libs.ref/sky130_fd_sc_hd/lib/sky130_fd_sc_hd__ff_n40C_1v95.lib"
set ::env(LIB_TYPICAL) "$::env(PDK_ROOT)/sky130A/libs.ref/sky130_fd_sc_hd/lib/sky130_fd_sc_hd__tt_025C_1v80.lib"
set ::env(LIB_SLOWEST) "$::env(PDK_ROOT)/sky130A/libs.ref/sky130_fd_sc_hd/lib/sky130_fd_sc_hd__ss_100C_1v60.lib"
set ::env(DESIGN_NAME) "user_project_wrapper"
set ::env(BASE_SDC_FILE) "base.sdc"
set ::env(SYNTH_DRIVING_CELL) "sky130_fd_sc_hd__inv_8"
set ::env(SYNTH_DRIVING_CELL_PIN) "Y"
set ::env(SYNTH_CAP_LOAD) "17.65"
set ::env(WIRE_RC_LAYER) "met1"
#To disable empty filler cell black box get created
#set link_make_black_boxes 0
set_cmd_units -time ns -capacitance pF -current mA -voltage V -resistance kOhm -distance um
define_corners wc bc tt
read_liberty -corner bc $::env(LIB_FASTEST)
read_liberty -corner wc $::env(LIB_SLOWEST)
read_liberty -corner tt $::env(LIB_TYPICAL)
read_verilog netlist/wb_host.v
read_verilog netlist/mbist1.v
read_verilog netlist/mbist2.v
read_verilog netlist/glbl_cfg.v
read_verilog netlist/wb_interconnect.v
read_verilog netlist/user_project_wrapper.v
read_lib -corner tt ../../lib/sky130_sram_2kbyte_1rw1r_32x512_8_TT_1p8V_25C.lib
read_lib -corner tt ../../lib/sram_1rw1r_32_256_8_sky130_TT_1p8V_25C.lib
link_design $::env(DESIGN_NAME)
read_spef -path u_mbist1 ../../spef/mbist_top1.spef
read_spef -path u_mbist2 ../../spef/mbist_top1.spef
read_spef -path u_mbist3 ../../spef/mbist_top2.spef
read_spef -path u_mbist4 ../../spef/mbist_top2.spef
read_spef -path u_wb_host ../../spef/wb_host.spef
read_spef -path u_intercon ../../spef/wb_interconnect.spef
read_spef -path u_glbl ../../spef/glbl_cfg.spef
read_spef ../../spef/user_project_wrapper.spef
read_sdc -echo $::env(BASE_SDC_FILE)
# check for missing constraints
check_setup -verbose > unconstraints.rpt
set_operating_conditions -analysis_type single
# Propgate the clock
set_propagated_clock [all_clocks]
report_tns
report_wns
#report_power
echo "################ CORNER : WC (SLOW) TIMING Report ###################" > timing_ss_max.rpt
report_checks -unique -path_delay max -slack_max -0.0 -group_count 100 -corner wc >> timing_ss_max.rpt
report_checks -group_count 100 -path_delay max -path_group $::env(WBM_CLOCK_NAME) -corner wc >> timing_ss_max.rpt
report_checks -group_count 100 -path_delay max -path_group $::env(WBS_CLOCK_NAME) -corner wc >> timing_ss_max.rpt
report_checks -group_count 100 -path_delay max -path_group $::env(BIST_CLOCK_NAME) -corner wc >> timing_ss_max.rpt
report_checks -path_delay max -corner wc >> timing_ss_max.rpt
echo "################ CORNER : BC (SLOW) TIMING Report ###################" > timing_ff_min.rpt
report_checks -unique -path_delay min -slack_min -0.0 -group_count 100 -corner bc >> timing_ff_min.rpt
report_checks -group_count 100 -path_delay min -path_group $::env(WBM_CLOCK_NAME) -corner bc >> timing_ff_min.rpt
report_checks -group_count 100 -path_delay min -path_group $::env(WBS_CLOCK_NAME) -corner bc >> timing_ff_min.rpt
report_checks -group_count 100 -path_delay min -path_group $::env(BIST_CLOCK_NAME) -corner bc >> timing_ff_min.rpt
report_checks -path_delay min -corner bc >> timing_ff_min.rpt
echo "################ CORNER : TT (MAX) TIMING Report ###################" > timing_tt_max.rpt
report_checks -unique -path_delay min -slack_min -0.0 -group_count 100 -corner tt >> timing_tt_max.rpt
report_checks -group_count 100 -path_delay max -path_group $::env(WBM_CLOCK_NAME) -corner tt >> timing_tt_max.rpt
report_checks -group_count 100 -path_delay max -path_group $::env(WBS_CLOCK_NAME) -corner tt >> timing_tt_max.rpt
report_checks -group_count 100 -path_delay max -path_group $::env(BIST_CLOCK_NAME) -corner tt >> timing_tt_max.rpt
report_checks -path_delay min -corner tt >> timing_tt_min.rpt
echo "################ CORNER : TT (MIN) TIMING Report ###################" > timing_tt_min.rpt
report_checks -unique -path_delay min -slack_min -0.0 -group_count 100 -corner tt >> timing_tt_min.rpt
report_checks -group_count 100 -path_delay min -path_group $::env(WBM_CLOCK_NAME) -corner tt >> timing_tt_min.rpt
report_checks -group_count 100 -path_delay min -path_group $::env(WBS_CLOCK_NAME) -corner tt >> timing_tt_min.rpt
report_checks -group_count 100 -path_delay min -path_group $::env(BIST_CLOCK_NAME) -corner tt >> timing_tt_min.rpt
report_checks -path_delay min -corner tt >> timing_tt_min.rpt
report_checks -path_delay min
#exit