blob: 948da33c3ed0540e22ad0f41dd9d19bef88dd50a [file] [log] [blame]
#// SPDX-FileCopyrightText: 2021 , Dinesh Annayya
#//
#// Licensed under the Apache License, Version 2.0 (the "License");
#// you may not use this file except in compliance with the License.
#// You may obtain a copy of the License at
#//
#// http://www.apache.org/licenses/LICENSE-2.0
#//
#// Unless required by applicable law or agreed to in writing, software
#// distributed under the License is distributed on an "AS IS" BASIS,
#// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#// See the License for the specific language governing permissions and
#// limitations under the License.
#// SPDX-License-Identifier: Apache-2.0
#// SPDX-FileContributor: Modified by Dinesh Annayya <dinesha@opencores.org>
# Global
# ------
set script_dir [file dirname [file normalize [info script]]]
# Name
set ::env(DESIGN_NAME) wb_host
set ::env(DESIGN_IS_CORE) "0"
# Timing configuration
set ::env(CLOCK_PERIOD) "10"
set ::env(CLOCK_PORT) "wbm_clk_i mem_clk"
set ::env(SYNTH_MAX_FANOUT) 4
# Sources
# -------
# Local sources + no2usb sources
set ::env(VERILOG_FILES) "\
$script_dir/../../verilog/rtl/wb_host/src/wb_host.sv \
$script_dir/../../verilog/rtl/lib/async_fifo.sv \
$script_dir/../../verilog/rtl/lib/async_wb.sv \
$script_dir/../../verilog/rtl/lib/clk_ctl.v \
$script_dir/../../verilog/rtl/lib/ser_inf_32b.sv \
$script_dir/../../verilog/rtl/lib/ctech_cells.sv \
$script_dir/../../verilog/rtl/lib/registers.v"
set ::env(SYNTH_READ_BLACKBOX_LIB) 1
set ::env(SDC_FILE) "$script_dir/base.sdc"
set ::env(BASE_SDC_FILE) "$script_dir/base.sdc"
set ::env(LEC_ENABLE) 0
set ::env(VDD_PIN) [list {vccd1}]
set ::env(GND_PIN) [list {vssd1}]
# Floorplanning
# -------------
set ::env(FP_PIN_ORDER_CFG) $::env(DESIGN_DIR)/pin_order.cfg
set ::env(FP_SIZING) absolute
set ::env(DIE_AREA) "0 0 400 300"
# If you're going to use multiple power domains, then keep this disabled.
set ::env(RUN_CVC) 1
#set ::env(PDN_CFG) $script_dir/pdn.tcl
set ::env(PL_TIME_DRIVEN) 1
set ::env(PL_TARGET_DENSITY) "0.30"
set ::env(FP_IO_VEXTEND) 4
set ::env(FP_IO_HEXTEND) 4
set ::env(FP_PDN_VPITCH) 100
set ::env(FP_PDN_HPITCH) 100
set ::env(FP_PDN_VWIDTH) 5
set ::env(FP_PDN_HWIDTH) 5
set ::env(GLB_RT_MAXLAYER) 5
set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 10
set ::env(DIODE_INSERTION_STRATEGY) 4
set ::env(QUIT_ON_TIMING_VIOLATIONS) "0"
set ::env(QUIT_ON_MAGIC_DRC) "1"
set ::env(QUIT_ON_LVS_ERROR) "0"
set ::env(QUIT_ON_SLEW_VIOLATIONS) "0"