WIP digitalcore macro. Doesn't harden yet

openlane/digitalcore_macro/base.sdc

diff --git a/openlane/digitalcore_macro/base.sdc b/openlane/digitalcore_macro/base.sdc
new file mode 100644
index 0000000..28171c8
--- /dev/null
+++ b/openlane/digitalcore_macro/base.sdc
@@ -0,0 +1,31 @@
+
+if {[info exists ::env(CLOCK_PORT)] && $::env(CLOCK_PORT) != ""} {
+    create_clock [get_ports $::env(CLOCK_PORT)]  -name $::env(CLOCK_PORT)  -period $::env(CLOCK_PERIOD)
+} else {
+    create_clock -name VIRTUAL_CLK -period $::env(CLOCK_PERIOD)
+    set ::env(CLOCK_PORT) VIRTUAL_CLK
+}
+set input_delay_value [expr $::env(CLOCK_PERIOD) * $::env(IO_PCT)]
+set output_delay_value [expr $::env(CLOCK_PERIOD) * $::env(IO_PCT)]
+puts "\[INFO\]: Setting output delay to: $output_delay_value"
+puts "\[INFO\]: Setting input delay to: $input_delay_value"
+
+set_max_fanout $::env(SYNTH_MAX_FANOUT) [current_design]
+
+set clk_indx [lsearch [all_inputs] [get_port $::env(CLOCK_PORT)]]
+#set rst_indx [lsearch [all_inputs] [get_port resetn]]
+set all_inputs_wo_clk [lreplace [all_inputs] $clk_indx $clk_indx]
+#set all_inputs_wo_clk_rst [lreplace $all_inputs_wo_clk $rst_indx $rst_indx]
+set all_inputs_wo_clk_rst $all_inputs_wo_clk
+
+
+# correct resetn
+set_input_delay $input_delay_value  -clock [get_clocks $::env(CLOCK_PORT)] $all_inputs_wo_clk_rst
+#set_input_delay 0.0 -clock [get_clocks $::env(CLOCK_PORT)] {resetn}
+set_output_delay $output_delay_value  -clock [get_clocks $::env(CLOCK_PORT)] [all_outputs]
+
+# TODO set this as parameter
+set_driving_cell -lib_cell $::env(SYNTH_DRIVING_CELL) -pin $::env(SYNTH_DRIVING_CELL_PIN) [all_inputs]
+set cap_load [expr $::env(SYNTH_CAP_LOAD) / 1000.0]
+puts "\[INFO\]: Setting load to: $cap_load"
+set_load  $cap_load [all_outputs]

openlane/digitalcore_macro/config.tcl

diff --git a/openlane/digitalcore_macro/config.tcl b/openlane/digitalcore_macro/config.tcl
new file mode 100755
index 0000000..8f6a898
--- /dev/null
+++ b/openlane/digitalcore_macro/config.tcl
@@ -0,0 +1,52 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# SPDX-License-Identifier: Apache-2.0
+
+set script_dir [file dirname [file normalize [info script]]]
+
+set ::env(DESIGN_NAME) digitalcore_macro
+
+set ::env(VERILOG_FILES) "\
+	$::env(CARAVEL_ROOT)/verilog/rtl/defines.v \
+	$script_dir/../../ip/randsack/dtop.v"
+
+set ::env(DESIGN_IS_CORE) 0
+
+set ::env(BASE_SDC_FILE) "$script_dir/base.sdc"
+
+set ::env(CLOCK_PORT) "wb_clk_i"
+# set ::env(CLOCK_NET) "counter.clk"
+set ::env(CLOCK_PERIOD) "10"
+
+set ::env(FP_SIZING) absolute
+set ::env(DIE_AREA) "0 0 1000 1000"
+
+set ::env(FP_PIN_ORDER_CFG) $script_dir/pin_order.cfg
+
+set ::env(PL_BASIC_PLACEMENT) 1
+set ::env(PL_TARGET_DENSITY) 0.3
+
+# Maximum layer used for routing is metal 4.
+# This is because this macro will be inserted in a top level (user_project_wrapper)
+# where the PDN is planned on metal 5. So, to avoid having shorts between routes
+# in this macro and the top level metal 5 stripes, we have to restrict routes to metal4.
+set ::env(GLB_RT_MAXLAYER) 5
+
+# You can draw more power domains if you need to
+set ::env(VDD_NETS) [list {vccd1}]
+set ::env(GND_NETS) [list {vssd1}]
+
+set ::env(DIODE_INSERTION_STRATEGY) 4
+# If you're going to use multiple power domains, then disable cvc run.
+set ::env(RUN_CVC) 1

openlane/digitalcore_macro/pin_order.cfg

diff --git a/openlane/digitalcore_macro/pin_order.cfg b/openlane/digitalcore_macro/pin_order.cfg
new file mode 100644
index 0000000..2fda806
--- /dev/null
+++ b/openlane/digitalcore_macro/pin_order.cfg
@@ -0,0 +1,10 @@
+#BUS_SORT
+
+#S
+wb_.*
+wbs_.*
+la_.*
+irq.*
+
+#N
+io_.*