|author||Philipp Gühring <email@example.com>||Sat Nov 13 17:08:32 2021 +0100|
|committer||Philipp Gühring <firstname.lastname@example.org>||Sat Nov 13 17:08:32 2021 +0100|
Updated to MPW3
This project is a test-wafer which puts various LS130 cells into the user-area of a Caravel harness for taping the LS130 cells out on the Skywater 130nm process.
The LS130 cells are generated with the https://github.com/thesourcerer8/StdCellLib flow (which uses Librecell's lclayout and lctime), using the Tech.SKY130 configuration.
The build report can be seen here: https://pdk.libresilicon.com/dist/StdCellLib_20210618/Catalog/buildreport.html The cells were copied into this repository to avoid additional dependencies: https://github.com/thesourcerer8/caravel_stdcelllib_stdcells_project/tree/main/cells
A generator was developed to generate a Verilog file for all the cells that places each cell once and connects it to the IOs of the harness: https://github.com/thesourcerer8/caravel_stdcelllib_stdcells_project/blob/main/scripts/generator.pl The script needs to be run from the Catalog directory of your StdCellLib. The output is then used as https://github.com/thesourcerer8/caravel_stdcelllib_stdcells_project/blob/main/verilog/rtl/user_proj_example.v
In the end I adapted https://github.com/thesourcerer8/caravel_stdcelllib_stdcells_project/blob/main/openlane/user_proj_example/config.tcl to use the cells as blackbox cells.
git clone email@example.com:thesourcerer8/caravel_stdcelllib_stdcells_project.git
make install # install caravel-lite
make pdk # clone and build pdk
make openlane # clone and build build openlane
scripts/deploy2caravel.sh # This takes all the cells from the StdCellLib/Catalog directory and puts them on the Caravel
make user_proj_example # This builds the Caravel
Refer to README for the Caravel documentation.