| # SPDX-FileCopyrightText: 2020 Efabless Corporation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| # Base Configurations. Don't Touch |
| # section begin |
| set script_dir [file dirname [file normalize [info script]]] |
| |
| source $script_dir/../../caravel/openlane/user_project_wrapper_empty/fixed_wrapper_cfgs.tcl |
| |
| set ::env(DESIGN_NAME) user_project_wrapper |
| #section end |
| |
| # User Configurations |
| |
| ## Source Verilog Files |
| set ::env(VERILOG_FILES) "\ |
| $script_dir/../../caravel/verilog/rtl/defines.v \ |
| $script_dir/../../verilog/rtl/user_project_wrapper.v" |
| |
| ## Clock configurations |
| set ::env(CLOCK_PORT) "user_clock2" |
| set ::env(CLOCK_NET) "mprj.clk" |
| |
| set ::env(CLOCK_PERIOD) "10" |
| |
| ## Internal Macros |
| ### Macro Placement |
| |
| set ::env(MACRO_PLACEMENT_CFG) $script_dir/macro.cfg |
| |
| ### Black-box verilog and views |
| set ::env(VERILOG_FILES_BLACKBOX) "\ |
| $script_dir/../../caravel/verilog/rtl/defines.v \ |
| $script_dir/../../verilog/rtl/user_proj_example.v \ |
| $script_dir/../../verilog/rtl/ecc_registers/register_file.v \ |
| $script_dir/../../verilog/rtl/ecc_registers/register_data.v \ |
| $script_dir/../../verilog/rtl/ecc_registers/data_verificator.v \ |
| $script_dir/../../verilog/rtl/ecc_registers/decoder_output.v \ |
| $script_dir/../../verilog/rtl/ecc_registers/parity_calculator.v \ |
| $script_dir/../../verilog/rtl/ecc_registers/state_counters.v" |
| |
| set ::env(EXTRA_LEFS) "\ |
| $script_dir/../../lef/user_proj_example.lef" |
| |
| set ::env(EXTRA_GDS_FILES) "\ |
| $script_dir/../../gds/user_proj_example.gds" |
| |
| set ::env(GLB_RT_MAXLAYER) 5 |
| |
| set ::env(FP_PDN_CHECK_NODES) 0 |
| |
| # The following is because there are no std cells in the example wrapper project. |
| set ::env(SYNTH_TOP_LEVEL) 1 |
| set ::env(PL_RANDOM_GLB_PLACEMENT) 1 |
| |
| set ::env(PL_RESIZER_DESIGN_OPTIMIZATIONS) 0 |
| set ::env(PL_RESIZER_TIMING_OPTIMIZATIONS) 0 |
| set ::env(PL_RESIZER_BUFFER_INPUT_PORTS) 0 |
| set ::env(PL_RESIZER_BUFFER_OUTPUT_PORTS) 0 |
| |
| set ::env(DIODE_INSERTION_STRATEGY) 0 |
| set ::env(FILL_INSERTION) 0 |
| set ::env(TAP_DECAP_INSERTION) 0 |
| set ::env(CLOCK_TREE_SYNTH) 0 |
| |
| set ::env(ROUTING_CORES) 6 |
| set ::env(PL_BASIC_PLACEMENT) 0 |
| set ::env(ROUTING_OPT_ITERS) 70 |