blob: 3f8b3ef0156646fb379c1d1e2330f3de662cdcd4 [file] [log] [blame]
.. raw:: html
<!---
# SPDX-FileCopyrightText: 2020 Efabless Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# SPDX-License-Identifier: Apache-2.0
-->
.. _getting-started:
Caravel Architecture
====================
Caravel is composed of three main sub-blocks: *management area*, *storage area*, and *user project area*.
.. _management-area:
Management Area
--------------
The managment area includes a `picorv32 <https://github.com/cliffordwolf/picorv32>`__ based SoC that includes a number of periphrals like timers, uart, and gpio. The managemnt area runs firmware that can be used to:
- Configure User Project I/O pads
- Observe and control User Project signals (through on-chip logic
analyzer probes)
- Control the User Project power supply
For a complete list of the SoC periphrals, check the `memory map <https://github.com/efabless/caravel/blob/master/verilog/rtl/README>`__
.. _storage-area:
Storage Area
--------------
The storage area is an auxiliary storage space for the managment SoC. It holds two dual port RAM blocks (1KB) generated by
`OpenRAM <https://github.com/VLSIDA/OpenRAM.git>`__
The storage area is only accessible by the management SoC.
.. _user-project-area:
User Project Area
--------------
This is the user space. It has a limited silicon area ``2.92mm x 3.52mm`` as well as a fixed number of I/O pads ``38`` and power pads ``4``.
The user space has access to the following utilities provided by the management SoC:
- ``38`` IO Ports
- ``128`` Logic analyzer probes
- Wishbone port connection to the management SoC wishbone bus.
Quick Start for User Projects
=============================
Your area is the full user space, so feel free to add your
project there or create a differnt macro and harden it seperately then
insert it into the ``user_project_wrapper`` for digital projects or insert it into ``user_project_analog_wrapper`` for analog projects.
.. _digital-user-project:
Digital User Project
--------------------
If you are building a digital project for the user space, check a sample project at `caravel_user_project <https://github.com/efabless/caravel_user_project>`__.
If you will use OpenLANE to harden your design, go through the instructions in this `README <https://github.com/efabless/caravel/blob/master/openlane/README.rst>`__.
Digital user projects should adhere the following requirements:
- Top module is named ``user_project_wrapper``
- The ``user_project_wrapper`` adheres to the pin order defined at `Digital Wrapper Pin Order <https://github.com/efabless/caravel/blob/master/openlane/user_project_wrapper_empty/pin_order.cfg>`__.
- The ``user_project_wrapper`` adheres to the fixed design configurations at `Digital Wrapper Fixed Configuration <https://github.com/efabless/caravel/blob/master/openlane/user_project_wrapper_empty/fixed_wrapper_cfgs.tcl>`__.
- The user project repository adheres to the `Required Directory Structure <#required-directory-structure>`__.
.. _analog-user-project:
Analog User Project
------------------
If you are building an analog project for the user space, check a sample project at `caravel_user_project_analog <https://github.com/efabless/caravel_user_project_analog>`__.
Analog user projects should adhere the following requirements:
- Top module is named ``user_analog_project_wrapper``
- The ``user_analog_project_wrapper`` uses the `empty analog wrapper <https://github.com/efabless/caravel/blob/master/mag/user_analog_project_wrapper_empty.mag>`__.
- The ``user_analog_project_wrapper`` adheres to the same pin order and placement of the `empty analog wrapper <https://github.com/efabless/caravel/blob/master/mag/user_analog_project_wrapper_empty.mag>`__.
------
IMPORTANT
^^^^^^^^^
Please make sure to run ``make compress`` before commiting anything to
your repository. Avoid having 2 versions of the
``gds/user_project_wrapper.gds`` one compressed and the
other not compressed.
For information on tooling and versioning, please refer to `tool-versioning.rst <./docs/source/tool-versioning.rst>`__.
-----
Required Directory Structure
============================
- ``gds/`` : includes all the gds files used or produced from the
project.
- ``def`` : includes all the def files used or produced from the
project.
- ``lef/`` : includes all the lef files used or produced from the
project.
- ``mag/`` : includes all the mag files used or produced from the
project.
- ``maglef`` : includes all the maglef files used or produced from the
project.
- ``spi/lvs/`` : includes all the spice files used or produced from the
project.
- ``verilog/dv`` : includes all the simulation test benches and how to
run them.
- ``verilog/gl/`` : includes all the synthesized/elaborated netlists.
- ``verilog/rtl`` : includes all the Verilog RTLs and source files.
- ``openlane/<macro>/`` : includes all configuration files used to
run openlane on your project.
- ``info.yaml``: includes all the info required in `this
example <https://github.com/efabless/caravel/blob/master/info.yaml>`__. Please make sure that you are pointing to an
elaborated caravel netlist as well as a synthesized
gate-level-netlist for the `user_project_wrapper`
**NOTE:**
If you're using openlane to harden your design, the ``verilog/gl`` ``def/`` ``lef/`` ``gds/`` ``mag`` ``maglef`` directories should
be automatically populated by openlane.
.. _additional-material:
Additional Material
===============
.. _mpw-two:
MPW Two
--------
- `Open MPW Program - MPW-TWO Walkthrough <https://www.youtube.com/watch?v=jBrBqhVNgDo>`__
- `MPW Two Shuttle Program <https://efabless.com/open_shuttle_program/2>`__
.. _mpw-one:
MPW One
--------------
- `Caravel User Project Features -- What are the utilities provided by caravel to the user project ? <https://youtu.be/zJhnmilXGPo>`__
- `Aboard Caravel -- How to integrate your design with Caravel? <https://youtu.be/9QV8SDelURk>`__
- `Things to Clarify About Caravel -- What versions to use with Caravel? <https://youtu.be/-LZ522mxXMw>`__
- `45 Chips in 30 Days: Open Source ASIC at its best! <https://www.youtube.com/watch?v=qlBzE27at6M>`__
Check `mpw-one-final <https://github.com/efabless/caravel/tree/mpw-one-final>`__ for the caravel used for the mpw-one tapeout.
> :warning: You don't need to integrate your design with Caravel GDS for **MPW two**. Running ``make ship`` is no longer required.
.. |License| image:: https://img.shields.io/github/license/efabless/caravel
:alt: GitHub license - Apache 2.0
:target: https://github.com/efabless/caravel
.. |Documentation Status| image:: https://readthedocs.org/projects/caravel-harness/badge/?version=latest
:alt: ReadTheDocs Badge - https://caravel-harness.rtfd.io
:target: https://caravel-harness.readthedocs.io/en/latest/?badge=latest
.. |Build Status| image:: https://travis-ci.com/efabless/caravel.svg?branch=master
:alt: Travis Badge - https://travis-ci.org/efabless/caravel
:target: https://travis-ci.com/efabless/caravel