blob: 117c0f4b908b60e13dcd0c84e4177f42a94a06f5 [file] [log] [blame]
set_units -time ns
set ::env(WB_CLOCK_PERIOD) "10"
set ::env(WB_CLOCK_PORT) "wb_clk_i"
set ::env(SDRAM_CLOCK_PERIOD) "20"
set ::env(SDRAM_CLOCK_PORT) "sdram_clk"
set ::env(PAD_SDRAM_CLOCK_PERIOD) "20"
set ::env(PAD_SDRAM_CLOCK_PORT) "io_in\[29\]"
######################################
# WB Clock domain input output
######################################
create_clock [get_ports $::env(WB_CLOCK_PORT)] -name $::env(WB_CLOCK_PORT) -period $::env(WB_CLOCK_PERIOD)
set wb_input_delay_value [expr $::env(WB_CLOCK_PERIOD) * 0.6]
set wb_output_delay_value [expr $::env(WB_CLOCK_PERIOD) * 0.6]
puts "\[INFO\]: Setting wb output delay to:$wb_output_delay_value"
puts "\[INFO\]: Setting wb input delay to: $wb_input_delay_value"
set_input_delay 2.0 -clock [get_clocks $::env(WB_CLOCK_PORT)] {wb_rst_n}
set_input_delay 3.0 -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wb_stb_i*]
set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wb_addr_i*]
set_input_delay 5.0 -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wb_we_i*]
set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wb_dat_i*]
set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wb_sel_i*]
set_input_delay 3.0 -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wb_cyc_i*]
set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wb_cti_i*]
set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_tras_d*]
set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_trp_d*]
set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_trcd_d*]
set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_en*]
set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_req_depth*]
set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_mode_reg*]
set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_cas*]
set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_trcar_d*]
set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_twr_d*]
set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_rfsh*]
set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_rfmax*]
set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wb_dat_o*]
set_output_delay 3.0 -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wb_ack_o*]
set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port sdr_init_done*]
######################################
# SDRAM Clock domain input output
######################################
create_clock [get_ports $::env(SDRAM_CLOCK_PORT)] -name $::env(SDRAM_CLOCK_PORT) -period $::env(SDRAM_CLOCK_PERIOD)
set sdram_input_delay_value [expr $::env(SDRAM_CLOCK_PERIOD) * 0.6]
set sdram_output_delay_value [expr $::env(SDRAM_CLOCK_PERIOD) * 0.6]
puts "\[INFO\]: Setting wb output delay to:$wb_output_delay_value"
puts "\[INFO\]: Setting wb input delay to: $wb_input_delay_value"
set_output_delay $sdram_output_delay_value -clock [get_clocks $::env(SDRAM_CLOCK_PORT)] [get_port io_out*]
set_output_delay $sdram_output_delay_value -clock [get_clocks $::env(SDRAM_CLOCK_PORT)] [get_port io_oeb*]
################################################
# PAD SDRAM Clock domain input output
# Note: PAD SDRAM clock is same as SDRAM clock
# it's a feedback clock through pads
################################################
create_clock [get_ports $::env(PAD_SDRAM_CLOCK_PORT)] -name $::env(PAD_SDRAM_CLOCK_PORT) -period $::env(SDRAM_CLOCK_PERIOD)
set_input_delay $sdram_input_delay_value -clock [get_clocks $::env(PAD_SDRAM_CLOCK_PORT)] [get_port io_in*]
set_clock_groups -name async_clock -asynchronous -comment "Async Clock group" -group [get_clocks $::env(WB_CLOCK_PORT)] -group [get_clocks $::env(SDRAM_CLOCK_PORT)]
# TODO set this as parameter
set_driving_cell -lib_cell $::env(SYNTH_DRIVING_CELL) -pin $::env(SYNTH_DRIVING_CELL_PIN) [all_inputs]
set cap_load [expr $::env(SYNTH_CAP_LOAD) / 1000.0]
puts "\[INFO\]: Setting load to: $cap_load"
set_load $cap_load [all_outputs]