verilog/rtl/syntacore/scr1/src/top/scr1_dp_memory.sv

//////////////////////////////////////////////////////////////////////////////
// SPDX-FileCopyrightText: Syntacore LLC © 2016-2021
// 
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//      http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// SPDX-License-Identifier: Apache-2.0
// SPDX-FileContributor: Syntacore LLC
// //////////////////////////////////////////////////////////////////////////
/// @file       <scr1_dp_memory.sv>
/// @brief      Dual-port synchronous memory with byte enable inputs
///

`include "scr1_arch_description.svh"

`ifdef SCR1_TCM_EN
module scr1_dp_memory
#(
    parameter SCR1_WIDTH    = 32,
    parameter SCR1_SIZE     = `SCR1_IMEM_AWIDTH'h00010000,
    parameter SCR1_NBYTES   = SCR1_WIDTH / 8
)
(
    input   logic                           clk,
    // Port A
    input   logic                           rena,
    input   logic [$clog2(SCR1_SIZE)-1:2]   addra,
    output  logic [SCR1_WIDTH-1:0]          qa,
    // Port B
    input   logic                           renb,
    input   logic                           wenb,
    input   logic [SCR1_NBYTES-1:0]         webb,
    input   logic [$clog2(SCR1_SIZE)-1:2]   addrb,
    input   logic [SCR1_WIDTH-1:0]          datab,
    output  logic [SCR1_WIDTH-1:0]          qb
);

`ifdef SCR1_TRGT_FPGA_INTEL
//-------------------------------------------------------------------------------
// Local signal declaration
//-------------------------------------------------------------------------------
 `ifdef SCR1_TRGT_FPGA_INTEL_MAX10
(* ramstyle = "M9K" *)    logic [SCR1_NBYTES-1:0][7:0]  memory_array  [0:(SCR1_SIZE/SCR1_NBYTES)-1];
 `elsif SCR1_TRGT_FPGA_INTEL_ARRIAV
(* ramstyle = "M10K" *)   logic [SCR1_NBYTES-1:0][7:0]  memory_array  [0:(SCR1_SIZE/SCR1_NBYTES)-1];
 `endif
logic [3:0] wenbb;
//-------------------------------------------------------------------------------
// Port B memory behavioral description
//-------------------------------------------------------------------------------
assign wenbb = {4{wenb}} & webb;
always_ff @(posedge clk) begin
    if (wenb) begin
        if (wenbb[0]) begin
            memory_array[addrb][0] <= datab[0+:8];
        end
        if (wenbb[1]) begin
            memory_array[addrb][1] <= datab[8+:8];
        end
        if (wenbb[2]) begin
            memory_array[addrb][2] <= datab[16+:8];
        end
        if (wenbb[3]) begin
            memory_array[addrb][3] <= datab[24+:8];
        end
    end
    qb <= memory_array[addrb];
end
//-------------------------------------------------------------------------------
// Port A memory behavioral description
//-------------------------------------------------------------------------------
always_ff @(posedge clk) begin
    qa <= memory_array[addra];
end

`else // SCR1_TRGT_FPGA_INTEL

// CASE: OTHERS - SCR1_TRGT_FPGA_XILINX, SIMULATION, ASIC etc

localparam int unsigned RAM_SIZE_WORDS = SCR1_SIZE/SCR1_NBYTES;

//-------------------------------------------------------------------------------
// Local signal declaration
//-------------------------------------------------------------------------------
 `ifdef SCR1_TRGT_FPGA_XILINX
(* ram_style = "block" *)  logic  [SCR1_WIDTH-1:0]  ram_block  [RAM_SIZE_WORDS-1:0];
 `else  // ASIC or SIMULATION
logic  [SCR1_WIDTH-1:0]  ram_block  [RAM_SIZE_WORDS-1:0];
 `endif
//-------------------------------------------------------------------------------
// Port A memory behavioral description
//-------------------------------------------------------------------------------
always_ff @(posedge clk) begin
    if (rena) begin
        qa <= ram_block[addra];
    end
end

//-------------------------------------------------------------------------------
// Port B memory behavioral description
//-------------------------------------------------------------------------------
always_ff @(posedge clk) begin
    if (wenb) begin
        for (int i=0; i<SCR1_NBYTES; i++) begin
            if (webb[i]) begin
                ram_block[addrb][i*8 +: 8] <= datab[i*8 +: 8];
            end
        end
    end
    if (renb) begin
        qb <= ram_block[addrb];
    end
end

`endif // SCR1_TRGT_FPGA_INTEL

endmodule : scr1_dp_memory

`endif // SCR1_TCM_EN