blob: acb43f84fec483a4025b0f32397055420ede635a [file] [log] [blame]
# SPDX-FileCopyrightText: 2020 Efabless Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# SPDX-License-Identifier: Apache-2.0
# Base Configurations. Don't Touch
# section begin
set script_dir [file dirname [file normalize [info script]]]
source $script_dir/../../caravel/openlane/user_project_wrapper_empty/fixed_wrapper_cfgs.tcl
set ::env(DESIGN_NAME) user_project_wrapper
set verilog_root $script_dir/../../verilog/
set lef_root $script_dir/../../lef/
set gds_root $script_dir/../../gds/
#section end
# User Configurations
#
set ::env(DESIGN_IS_CORE) 1
set ::env(FP_PDN_CORE_RING) 1
## Source Verilog Files
set ::env(VERILOG_FILES) "\
$script_dir/../../caravel/verilog/rtl/defines.v \
$script_dir/../../verilog/rtl/user_project_wrapper.v"
## Clock configurations
set ::env(CLOCK_PORT) "user_clock2 wb_clk_i"
#set ::env(CLOCK_NET) "mprj.clk"
set ::env(CLOCK_PERIOD) "10"
## Internal Macros
### Macro Placement
set ::env(FP_SIZING) "absolute"
set ::env(MACRO_PLACEMENT_CFG) $script_dir/macro.cfg
set ::env(PDN_CFG) $script_dir/pdn.tcl
set ::env(SDC_FILE) "$script_dir/base.sdc"
set ::env(BASE_SDC_FILE) "$script_dir/base.sdc"
set ::env(SYNTH_READ_BLACKBOX_LIB) 1
### Black-box verilog and views
set ::env(VERILOG_FILES_BLACKBOX) "\
$script_dir/../../verilog/gl/spi_master.v \
$script_dir/../../verilog/gl/wb_interconnect.v \
$script_dir/../../verilog/gl/glbl_cfg.v \
$script_dir/../../verilog/gl/uart_i2cm.v \
$script_dir/../../verilog/gl/sdram.v \
$script_dir/../../verilog/gl/wb_host.v \
$script_dir/../../verilog/gl/clk_skew_adjust.v \
$script_dir/../../verilog/gl/syntacore.v \
"
set ::env(EXTRA_LEFS) "\
$lef_root/spi_master.lef \
$lef_root/glbl_cfg.lef \
$lef_root/wb_interconnect.lef \
$lef_root/sdram.lef \
$lef_root/uart_i2cm.lef \
$lef_root/wb_host.lef \
$lef_root/clk_skew_adjust.lef \
$lef_root/syntacore.lef \
"
set ::env(EXTRA_GDS_FILES) "\
$gds_root/spi_master.gds \
$gds_root/glbl_cfg.gds \
$gds_root/wb_interconnect.gds \
$gds_root/uart_i2cm.gds \
$gds_root/sdram.gds \
$gds_root/wb_host.gds \
$gds_root/clk_skew_adjust.gds \
$gds_root/syntacore.gds \
"
set ::env(SYNTH_DEFINES) [list SYNTHESIS ]
set ::env(VERILOG_INCLUDE_DIRS) [glob $script_dir/../../verilog/rtl/syntacore/scr1/src/includes $script_dir/../../verilog/rtl/sdram_ctrl/src/defs ]
set ::env(GLB_RT_MAXLAYER) 5
set ::env(FP_PDN_CHECK_NODES) 0
set ::env(RUN_KLAYOUT_DRC) 0
set ::env(VDD_PIN) [list {vdda1 vdda2 vccd1 vccd2}]
set ::env(GND_PIN) [list {vssa1 vssa2 vssd1 vssd2}]
set ::env(VDD_NETS) [list {vccd1}]
set ::env(GND_NETS) [list {vssd1}]
# The following is because there are no std cells in the example wrapper project.
#set ::env(SYNTH_TOP_LEVEL) 1
#set ::env(PL_RANDOM_GLB_PLACEMENT) 1
set ::env(PL_RESIZER_DESIGN_OPTIMIZATIONS) 0
set ::env(PL_RESIZER_TIMING_OPTIMIZATIONS) 0
set ::env(PL_RESIZER_BUFFER_INPUT_PORTS) 0
set ::env(PL_RESIZER_BUFFER_OUTPUT_PORTS) 0
set ::env(TAP_DECAP_INSERTION) "0"
set ::env(DIODE_INSERTION_STRATEGY) 0
set ::env(FILL_INSERTION) 0
set ::env(CLOCK_TREE_SYNTH) 0
#set ::env(MAGIC_EXT_USE_GDS) "1"
set ::env(PL_DIAMOND_SEARCH_HEIGHT) "250"
set ::env(FP_PDN_HOFFSET) "5"
set ::env(FP_PDN_HPITCH) "80"
set ::env(FP_PDN_HSPACING) "15"
set ::env(FP_PDN_HWIDTH) "3"
set ::env(FP_PDN_LOWER_LAYER) "met4"
set ::env(FP_PDN_RAILS_LAYER) "met1"
set ::env(FP_PDN_RAIL_OFFSET) "0"
set ::env(FP_PDN_RAIL_WIDTH) "0.48"
set ::env(FP_PDN_UPPER_LAYER) "met5"
set ::env(FP_PDN_VOFFSET) "5"
set ::env(FP_PDN_VPITCH) "80"
set ::env(FP_PDN_VSPACING) "15"
set ::env(FP_PDN_VWIDTH) "3"