| # SPDX-FileCopyrightText: 2021 , Dinesh Annayya |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # SPDX-License-Identifier: Apache-2.0 |
| # SPDX-FileContributor: Modified by Dinesh Annayya <dinesha@opencores.org> |
| |
| |
| set_units -time ns |
| set ::env(WB_CLOCK_PERIOD) "10" |
| set ::env(WB_CLOCK_PORT) "wb_clk_i" |
| |
| set ::env(SDRAM_CLOCK_PERIOD) "20" |
| set ::env(SDRAM_CLOCK_PORT) "sdram_clk" |
| |
| set ::env(PAD_SDRAM_CLOCK_PERIOD) "20" |
| set ::env(PAD_SDRAM_CLOCK_PORT) "io_in\[29\]" |
| ###################################### |
| # WB Clock domain input output |
| ###################################### |
| create_clock [get_ports $::env(WB_CLOCK_PORT)] -name $::env(WB_CLOCK_PORT) -period $::env(WB_CLOCK_PERIOD) |
| set wb_input_delay_value [expr $::env(WB_CLOCK_PERIOD) * 0.6] |
| set wb_output_delay_value [expr $::env(WB_CLOCK_PERIOD) * 0.6] |
| puts "\[INFO\]: Setting wb output delay to:$wb_output_delay_value" |
| puts "\[INFO\]: Setting wb input delay to: $wb_input_delay_value" |
| |
| |
| set_input_delay 2.0 -clock [get_clocks $::env(WB_CLOCK_PORT)] {wb_rst_n} |
| |
| set_input_delay 3.0 -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wb_stb_i*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wb_addr_i*] |
| set_input_delay 5.0 -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wb_we_i*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wb_dat_i*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wb_sel_i*] |
| set_input_delay 3.0 -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wb_cyc_i*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wb_cti_i*] |
| |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_tras_d*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_trp_d*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_trcd_d*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_en*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_req_depth*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_mode_reg*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_cas*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_trcar_d*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_twr_d*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_rfsh*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port cfg_sdr_rfmax*] |
| |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wb_dat_o*] |
| set_output_delay 3.0 -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wb_ack_o*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port sdr_init_done*] |
| |
| ###################################### |
| # SDRAM Clock domain input output |
| ###################################### |
| create_clock [get_ports $::env(SDRAM_CLOCK_PORT)] -name $::env(SDRAM_CLOCK_PORT) -period $::env(SDRAM_CLOCK_PERIOD) |
| set sdram_input_delay_value [expr $::env(SDRAM_CLOCK_PERIOD) * 0.6] |
| set sdram_output_delay_value [expr $::env(SDRAM_CLOCK_PERIOD) * 0.6] |
| puts "\[INFO\]: Setting wb output delay to:$wb_output_delay_value" |
| puts "\[INFO\]: Setting wb input delay to: $wb_input_delay_value" |
| |
| set_output_delay $sdram_output_delay_value -clock [get_clocks $::env(SDRAM_CLOCK_PORT)] [get_port io_out*] |
| set_output_delay $sdram_output_delay_value -clock [get_clocks $::env(SDRAM_CLOCK_PORT)] [get_port io_oeb*] |
| |
| ################################################ |
| # PAD SDRAM Clock domain input output |
| # Note: PAD SDRAM clock is same as SDRAM clock |
| # it's a feedback clock through pads |
| ################################################ |
| |
| create_clock [get_ports $::env(PAD_SDRAM_CLOCK_PORT)] -name $::env(PAD_SDRAM_CLOCK_PORT) -period $::env(SDRAM_CLOCK_PERIOD) |
| set_input_delay $sdram_input_delay_value -clock [get_clocks $::env(PAD_SDRAM_CLOCK_PORT)] [get_port io_in*] |
| |
| |
| set_clock_groups -name async_clock -asynchronous -comment "Async Clock group" -group [get_clocks $::env(WB_CLOCK_PORT)] -group [get_clocks $::env(SDRAM_CLOCK_PORT)] |
| |
| |
| # TODO set this as parameter |
| set_driving_cell -lib_cell $::env(SYNTH_DRIVING_CELL) -pin $::env(SYNTH_DRIVING_CELL_PIN) [all_inputs] |
| set cap_load [expr $::env(SYNTH_CAP_LOAD) / 1000.0] |
| puts "\[INFO\]: Setting load to: $cap_load" |
| set_load $cap_load [all_outputs] |
| |