| # SPDX-FileCopyrightText: 2020 Efabless Corporation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| set script_dir [file dirname [file normalize [info script]]] |
| |
| set ::env(DESIGN_NAME) user_proj_example |
| |
| set ::env(VERILOG_FILES) "\ |
| $script_dir/../../caravel/verilog/rtl/defines.v \ |
| $script_dir/../../verilog/rtl/ptc/ptc_defines.v \ |
| $script_dir/../../verilog/rtl/ptc/ptc_top.v \ |
| $script_dir/../../verilog/rtl/i2c/i2c_master_defines.v \ |
| $script_dir/../../verilog/rtl/i2c/i2c_master_bit_ctrl.v \ |
| $script_dir/../../verilog/rtl/i2c/i2c_master_byte_ctrl.v \ |
| $script_dir/../../verilog/rtl/i2c/i2c_master_top.v \ |
| $script_dir/../../verilog/rtl/fpu/except.v \ |
| $script_dir/../../verilog/rtl/fpu/post_norm.v \ |
| $script_dir/../../verilog/rtl/fpu/pre_norm_fmul.v \ |
| $script_dir/../../verilog/rtl/fpu/pre_norm.v \ |
| $script_dir/../../verilog/rtl/fpu/primitives.v \ |
| $script_dir/../../verilog/rtl/fpu/fpu.v \ |
| $script_dir/../../verilog/rtl/user_proj_example.v" |
| |
| set ::env(CLOCK_PORT) "wb_clk_i" |
| set ::env(CLOCK_NET) "wb_clk_i" |
| set ::env(CLOCK_PERIOD) "10" |
| |
| set ::env(DESIGN_IS_CORE) 0 |
| set ::env(FP_PDN_CORE_RING) 0 |
| set ::env(GLB_RT_MAXLAYER) 5 |
| set ::env(FP_PIN_ORDER_CFG) $script_dir/pin_order.cfg |
| |
| set ::env(VDD_NETS) [list {vccd1} {vccd2} {vdda1} {vdda2}] |
| set ::env(GND_NETS) [list {vssd1} {vssd2} {vssa1} {vssa2}] |
| |
| set ::env(SYNTH_MAX_FANOUT) 6 |
| set ::env(FP_CORE_UTIL) 20 |
| set ::env(PL_TARGET_DENSITY) [ expr ($::env(FP_CORE_UTIL)+4) / 100.0 ] |
| set ::env(CELL_PAD) 4 |
| |
| set ::env(DIODE_INSERTION_STRATEGY) 0 |
| #set ::env(SYNTH_STRATEGY) 2 |
| #set ::env(SYNTH_STRATEGY) "DELAY 1" |
| set ::env(SYNTH_NO_FLAT) 0 |
| |
| set ::env(ROUTING_CORES) 16 |
| |
| set ::env(MAGIC_DRC_USE_GDS) 1 |
| set ::env(LVS_INSERT_POWER_PINS) 1 |
| |