| // Copyright 2020 Efabless Corporation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| /* Generated by Yosys 0.9+3621 (git sha1 84e9fa7, gcc 8.3.1 -fPIC -Os) */ |
| |
| module chip_io(vddio, vssio, vccd, vssd, vdda, vssa, vdda1, vdda2, vssa1, vssa2, vccd1, vccd2, vssd1, vssd2, gpio, clock, resetb, flash_csb, flash_clk, flash_io0, flash_io1, porb_h, por, resetb_core_h, clock_core, gpio_out_core, gpio_in_core, gpio_mode0_core, gpio_mode1_core, gpio_outenb_core, gpio_inenb_core, flash_csb_core, flash_clk_core, flash_csb_oeb_core, flash_clk_oeb_core, flash_io0_oeb_core, flash_io1_oeb_core, flash_csb_ieb_core, flash_clk_ieb_core, flash_io0_ieb_core, flash_io1_ieb_core, flash_io0_do_core, flash_io1_do_core, flash_io0_di_core, flash_io1_di_core, mprj_io, mprj_io_out, mprj_io_oeb, mprj_io_hldh_n, mprj_io_enh, mprj_io_inp_dis, mprj_io_ib_mode_sel, mprj_io_vtrip_sel, mprj_io_slow_sel, mprj_io_holdover, mprj_io_analog_en, mprj_io_analog_sel, mprj_io_analog_pol, mprj_io_dm, mprj_io_in, mprj_analog_io); |
| wire analog_a; |
| wire analog_b; |
| input clock; |
| output clock_core; |
| wire \dm_all[0] ; |
| wire \dm_all[1] ; |
| wire \dm_all[2] ; |
| output flash_clk; |
| input flash_clk_core; |
| input flash_clk_ieb_core; |
| input flash_clk_oeb_core; |
| output flash_csb; |
| input flash_csb_core; |
| input flash_csb_ieb_core; |
| input flash_csb_oeb_core; |
| inout flash_io0; |
| output flash_io0_di_core; |
| input flash_io0_do_core; |
| input flash_io0_ieb_core; |
| wire \flash_io0_mode[0] ; |
| wire \flash_io0_mode[1] ; |
| wire \flash_io0_mode[2] ; |
| input flash_io0_oeb_core; |
| inout flash_io1; |
| output flash_io1_di_core; |
| input flash_io1_do_core; |
| input flash_io1_ieb_core; |
| wire \flash_io1_mode[0] ; |
| wire \flash_io1_mode[1] ; |
| wire \flash_io1_mode[2] ; |
| input flash_io1_oeb_core; |
| inout gpio; |
| output gpio_in_core; |
| input gpio_inenb_core; |
| input gpio_mode0_core; |
| input gpio_mode1_core; |
| input gpio_out_core; |
| input gpio_outenb_core; |
| wire loop_clock; |
| wire loop_flash_clk; |
| wire loop_flash_csb; |
| wire loop_flash_io0; |
| wire loop_flash_io1; |
| wire loop_gpio; |
| inout [30:0] mprj_analog_io; |
| inout [37:0] mprj_io; |
| input [37:0] mprj_io_analog_en; |
| input [37:0] mprj_io_analog_pol; |
| input [37:0] mprj_io_analog_sel; |
| input [113:0] mprj_io_dm; |
| input [37:0] mprj_io_enh; |
| input [37:0] mprj_io_hldh_n; |
| input [37:0] mprj_io_holdover; |
| input [37:0] mprj_io_ib_mode_sel; |
| output [37:0] mprj_io_in; |
| input [37:0] mprj_io_inp_dis; |
| input [37:0] mprj_io_oeb; |
| input [37:0] mprj_io_out; |
| input [37:0] mprj_io_slow_sel; |
| input [37:0] mprj_io_vtrip_sel; |
| wire \mprj_pads.analog_a ; |
| wire \mprj_pads.analog_b ; |
| wire \mprj_pads.analog_en[0] ; |
| wire \mprj_pads.analog_en[10] ; |
| wire \mprj_pads.analog_en[11] ; |
| wire \mprj_pads.analog_en[12] ; |
| wire \mprj_pads.analog_en[13] ; |
| wire \mprj_pads.analog_en[14] ; |
| wire \mprj_pads.analog_en[15] ; |
| wire \mprj_pads.analog_en[16] ; |
| wire \mprj_pads.analog_en[17] ; |
| wire \mprj_pads.analog_en[18] ; |
| wire \mprj_pads.analog_en[19] ; |
| wire \mprj_pads.analog_en[1] ; |
| wire \mprj_pads.analog_en[20] ; |
| wire \mprj_pads.analog_en[21] ; |
| wire \mprj_pads.analog_en[22] ; |
| wire \mprj_pads.analog_en[23] ; |
| wire \mprj_pads.analog_en[24] ; |
| wire \mprj_pads.analog_en[25] ; |
| wire \mprj_pads.analog_en[26] ; |
| wire \mprj_pads.analog_en[27] ; |
| wire \mprj_pads.analog_en[28] ; |
| wire \mprj_pads.analog_en[29] ; |
| wire \mprj_pads.analog_en[2] ; |
| wire \mprj_pads.analog_en[30] ; |
| wire \mprj_pads.analog_en[31] ; |
| wire \mprj_pads.analog_en[32] ; |
| wire \mprj_pads.analog_en[33] ; |
| wire \mprj_pads.analog_en[34] ; |
| wire \mprj_pads.analog_en[35] ; |
| wire \mprj_pads.analog_en[36] ; |
| wire \mprj_pads.analog_en[37] ; |
| wire \mprj_pads.analog_en[3] ; |
| wire \mprj_pads.analog_en[4] ; |
| wire \mprj_pads.analog_en[5] ; |
| wire \mprj_pads.analog_en[6] ; |
| wire \mprj_pads.analog_en[7] ; |
| wire \mprj_pads.analog_en[8] ; |
| wire \mprj_pads.analog_en[9] ; |
| wire \mprj_pads.analog_io[0] ; |
| wire \mprj_pads.analog_io[10] ; |
| wire \mprj_pads.analog_io[11] ; |
| wire \mprj_pads.analog_io[12] ; |
| wire \mprj_pads.analog_io[13] ; |
| wire \mprj_pads.analog_io[14] ; |
| wire \mprj_pads.analog_io[15] ; |
| wire \mprj_pads.analog_io[16] ; |
| wire \mprj_pads.analog_io[17] ; |
| wire \mprj_pads.analog_io[18] ; |
| wire \mprj_pads.analog_io[19] ; |
| wire \mprj_pads.analog_io[1] ; |
| wire \mprj_pads.analog_io[20] ; |
| wire \mprj_pads.analog_io[21] ; |
| wire \mprj_pads.analog_io[22] ; |
| wire \mprj_pads.analog_io[23] ; |
| wire \mprj_pads.analog_io[24] ; |
| wire \mprj_pads.analog_io[25] ; |
| wire \mprj_pads.analog_io[26] ; |
| wire \mprj_pads.analog_io[27] ; |
| wire \mprj_pads.analog_io[28] ; |
| wire \mprj_pads.analog_io[29] ; |
| wire \mprj_pads.analog_io[2] ; |
| wire \mprj_pads.analog_io[30] ; |
| wire \mprj_pads.analog_io[3] ; |
| wire \mprj_pads.analog_io[4] ; |
| wire \mprj_pads.analog_io[5] ; |
| wire \mprj_pads.analog_io[6] ; |
| wire \mprj_pads.analog_io[7] ; |
| wire \mprj_pads.analog_io[8] ; |
| wire \mprj_pads.analog_io[9] ; |
| wire \mprj_pads.analog_pol[0] ; |
| wire \mprj_pads.analog_pol[10] ; |
| wire \mprj_pads.analog_pol[11] ; |
| wire \mprj_pads.analog_pol[12] ; |
| wire \mprj_pads.analog_pol[13] ; |
| wire \mprj_pads.analog_pol[14] ; |
| wire \mprj_pads.analog_pol[15] ; |
| wire \mprj_pads.analog_pol[16] ; |
| wire \mprj_pads.analog_pol[17] ; |
| wire \mprj_pads.analog_pol[18] ; |
| wire \mprj_pads.analog_pol[19] ; |
| wire \mprj_pads.analog_pol[1] ; |
| wire \mprj_pads.analog_pol[20] ; |
| wire \mprj_pads.analog_pol[21] ; |
| wire \mprj_pads.analog_pol[22] ; |
| wire \mprj_pads.analog_pol[23] ; |
| wire \mprj_pads.analog_pol[24] ; |
| wire \mprj_pads.analog_pol[25] ; |
| wire \mprj_pads.analog_pol[26] ; |
| wire \mprj_pads.analog_pol[27] ; |
| wire \mprj_pads.analog_pol[28] ; |
| wire \mprj_pads.analog_pol[29] ; |
| wire \mprj_pads.analog_pol[2] ; |
| wire \mprj_pads.analog_pol[30] ; |
| wire \mprj_pads.analog_pol[31] ; |
| wire \mprj_pads.analog_pol[32] ; |
| wire \mprj_pads.analog_pol[33] ; |
| wire \mprj_pads.analog_pol[34] ; |
| wire \mprj_pads.analog_pol[35] ; |
| wire \mprj_pads.analog_pol[36] ; |
| wire \mprj_pads.analog_pol[37] ; |
| wire \mprj_pads.analog_pol[3] ; |
| wire \mprj_pads.analog_pol[4] ; |
| wire \mprj_pads.analog_pol[5] ; |
| wire \mprj_pads.analog_pol[6] ; |
| wire \mprj_pads.analog_pol[7] ; |
| wire \mprj_pads.analog_pol[8] ; |
| wire \mprj_pads.analog_pol[9] ; |
| wire \mprj_pads.analog_sel[0] ; |
| wire \mprj_pads.analog_sel[10] ; |
| wire \mprj_pads.analog_sel[11] ; |
| wire \mprj_pads.analog_sel[12] ; |
| wire \mprj_pads.analog_sel[13] ; |
| wire \mprj_pads.analog_sel[14] ; |
| wire \mprj_pads.analog_sel[15] ; |
| wire \mprj_pads.analog_sel[16] ; |
| wire \mprj_pads.analog_sel[17] ; |
| wire \mprj_pads.analog_sel[18] ; |
| wire \mprj_pads.analog_sel[19] ; |
| wire \mprj_pads.analog_sel[1] ; |
| wire \mprj_pads.analog_sel[20] ; |
| wire \mprj_pads.analog_sel[21] ; |
| wire \mprj_pads.analog_sel[22] ; |
| wire \mprj_pads.analog_sel[23] ; |
| wire \mprj_pads.analog_sel[24] ; |
| wire \mprj_pads.analog_sel[25] ; |
| wire \mprj_pads.analog_sel[26] ; |
| wire \mprj_pads.analog_sel[27] ; |
| wire \mprj_pads.analog_sel[28] ; |
| wire \mprj_pads.analog_sel[29] ; |
| wire \mprj_pads.analog_sel[2] ; |
| wire \mprj_pads.analog_sel[30] ; |
| wire \mprj_pads.analog_sel[31] ; |
| wire \mprj_pads.analog_sel[32] ; |
| wire \mprj_pads.analog_sel[33] ; |
| wire \mprj_pads.analog_sel[34] ; |
| wire \mprj_pads.analog_sel[35] ; |
| wire \mprj_pads.analog_sel[36] ; |
| wire \mprj_pads.analog_sel[37] ; |
| wire \mprj_pads.analog_sel[3] ; |
| wire \mprj_pads.analog_sel[4] ; |
| wire \mprj_pads.analog_sel[5] ; |
| wire \mprj_pads.analog_sel[6] ; |
| wire \mprj_pads.analog_sel[7] ; |
| wire \mprj_pads.analog_sel[8] ; |
| wire \mprj_pads.analog_sel[9] ; |
| wire \mprj_pads.dm[0] ; |
| wire \mprj_pads.dm[100] ; |
| wire \mprj_pads.dm[101] ; |
| wire \mprj_pads.dm[102] ; |
| wire \mprj_pads.dm[103] ; |
| wire \mprj_pads.dm[104] ; |
| wire \mprj_pads.dm[105] ; |
| wire \mprj_pads.dm[106] ; |
| wire \mprj_pads.dm[107] ; |
| wire \mprj_pads.dm[108] ; |
| wire \mprj_pads.dm[109] ; |
| wire \mprj_pads.dm[10] ; |
| wire \mprj_pads.dm[110] ; |
| wire \mprj_pads.dm[111] ; |
| wire \mprj_pads.dm[112] ; |
| wire \mprj_pads.dm[113] ; |
| wire \mprj_pads.dm[11] ; |
| wire \mprj_pads.dm[12] ; |
| wire \mprj_pads.dm[13] ; |
| wire \mprj_pads.dm[14] ; |
| wire \mprj_pads.dm[15] ; |
| wire \mprj_pads.dm[16] ; |
| wire \mprj_pads.dm[17] ; |
| wire \mprj_pads.dm[18] ; |
| wire \mprj_pads.dm[19] ; |
| wire \mprj_pads.dm[1] ; |
| wire \mprj_pads.dm[20] ; |
| wire \mprj_pads.dm[21] ; |
| wire \mprj_pads.dm[22] ; |
| wire \mprj_pads.dm[23] ; |
| wire \mprj_pads.dm[24] ; |
| wire \mprj_pads.dm[25] ; |
| wire \mprj_pads.dm[26] ; |
| wire \mprj_pads.dm[27] ; |
| wire \mprj_pads.dm[28] ; |
| wire \mprj_pads.dm[29] ; |
| wire \mprj_pads.dm[2] ; |
| wire \mprj_pads.dm[30] ; |
| wire \mprj_pads.dm[31] ; |
| wire \mprj_pads.dm[32] ; |
| wire \mprj_pads.dm[33] ; |
| wire \mprj_pads.dm[34] ; |
| wire \mprj_pads.dm[35] ; |
| wire \mprj_pads.dm[36] ; |
| wire \mprj_pads.dm[37] ; |
| wire \mprj_pads.dm[38] ; |
| wire \mprj_pads.dm[39] ; |
| wire \mprj_pads.dm[3] ; |
| wire \mprj_pads.dm[40] ; |
| wire \mprj_pads.dm[41] ; |
| wire \mprj_pads.dm[42] ; |
| wire \mprj_pads.dm[43] ; |
| wire \mprj_pads.dm[44] ; |
| wire \mprj_pads.dm[45] ; |
| wire \mprj_pads.dm[46] ; |
| wire \mprj_pads.dm[47] ; |
| wire \mprj_pads.dm[48] ; |
| wire \mprj_pads.dm[49] ; |
| wire \mprj_pads.dm[4] ; |
| wire \mprj_pads.dm[50] ; |
| wire \mprj_pads.dm[51] ; |
| wire \mprj_pads.dm[52] ; |
| wire \mprj_pads.dm[53] ; |
| wire \mprj_pads.dm[54] ; |
| wire \mprj_pads.dm[55] ; |
| wire \mprj_pads.dm[56] ; |
| wire \mprj_pads.dm[57] ; |
| wire \mprj_pads.dm[58] ; |
| wire \mprj_pads.dm[59] ; |
| wire \mprj_pads.dm[5] ; |
| wire \mprj_pads.dm[60] ; |
| wire \mprj_pads.dm[61] ; |
| wire \mprj_pads.dm[62] ; |
| wire \mprj_pads.dm[63] ; |
| wire \mprj_pads.dm[64] ; |
| wire \mprj_pads.dm[65] ; |
| wire \mprj_pads.dm[66] ; |
| wire \mprj_pads.dm[67] ; |
| wire \mprj_pads.dm[68] ; |
| wire \mprj_pads.dm[69] ; |
| wire \mprj_pads.dm[6] ; |
| wire \mprj_pads.dm[70] ; |
| wire \mprj_pads.dm[71] ; |
| wire \mprj_pads.dm[72] ; |
| wire \mprj_pads.dm[73] ; |
| wire \mprj_pads.dm[74] ; |
| wire \mprj_pads.dm[75] ; |
| wire \mprj_pads.dm[76] ; |
| wire \mprj_pads.dm[77] ; |
| wire \mprj_pads.dm[78] ; |
| wire \mprj_pads.dm[79] ; |
| wire \mprj_pads.dm[7] ; |
| wire \mprj_pads.dm[80] ; |
| wire \mprj_pads.dm[81] ; |
| wire \mprj_pads.dm[82] ; |
| wire \mprj_pads.dm[83] ; |
| wire \mprj_pads.dm[84] ; |
| wire \mprj_pads.dm[85] ; |
| wire \mprj_pads.dm[86] ; |
| wire \mprj_pads.dm[87] ; |
| wire \mprj_pads.dm[88] ; |
| wire \mprj_pads.dm[89] ; |
| wire \mprj_pads.dm[8] ; |
| wire \mprj_pads.dm[90] ; |
| wire \mprj_pads.dm[91] ; |
| wire \mprj_pads.dm[92] ; |
| wire \mprj_pads.dm[93] ; |
| wire \mprj_pads.dm[94] ; |
| wire \mprj_pads.dm[95] ; |
| wire \mprj_pads.dm[96] ; |
| wire \mprj_pads.dm[97] ; |
| wire \mprj_pads.dm[98] ; |
| wire \mprj_pads.dm[99] ; |
| wire \mprj_pads.dm[9] ; |
| wire \mprj_pads.enh[0] ; |
| wire \mprj_pads.enh[10] ; |
| wire \mprj_pads.enh[11] ; |
| wire \mprj_pads.enh[12] ; |
| wire \mprj_pads.enh[13] ; |
| wire \mprj_pads.enh[14] ; |
| wire \mprj_pads.enh[15] ; |
| wire \mprj_pads.enh[16] ; |
| wire \mprj_pads.enh[17] ; |
| wire \mprj_pads.enh[18] ; |
| wire \mprj_pads.enh[19] ; |
| wire \mprj_pads.enh[1] ; |
| wire \mprj_pads.enh[20] ; |
| wire \mprj_pads.enh[21] ; |
| wire \mprj_pads.enh[22] ; |
| wire \mprj_pads.enh[23] ; |
| wire \mprj_pads.enh[24] ; |
| wire \mprj_pads.enh[25] ; |
| wire \mprj_pads.enh[26] ; |
| wire \mprj_pads.enh[27] ; |
| wire \mprj_pads.enh[28] ; |
| wire \mprj_pads.enh[29] ; |
| wire \mprj_pads.enh[2] ; |
| wire \mprj_pads.enh[30] ; |
| wire \mprj_pads.enh[31] ; |
| wire \mprj_pads.enh[32] ; |
| wire \mprj_pads.enh[33] ; |
| wire \mprj_pads.enh[34] ; |
| wire \mprj_pads.enh[35] ; |
| wire \mprj_pads.enh[36] ; |
| wire \mprj_pads.enh[37] ; |
| wire \mprj_pads.enh[3] ; |
| wire \mprj_pads.enh[4] ; |
| wire \mprj_pads.enh[5] ; |
| wire \mprj_pads.enh[6] ; |
| wire \mprj_pads.enh[7] ; |
| wire \mprj_pads.enh[8] ; |
| wire \mprj_pads.enh[9] ; |
| wire \mprj_pads.hldh_n[0] ; |
| wire \mprj_pads.hldh_n[10] ; |
| wire \mprj_pads.hldh_n[11] ; |
| wire \mprj_pads.hldh_n[12] ; |
| wire \mprj_pads.hldh_n[13] ; |
| wire \mprj_pads.hldh_n[14] ; |
| wire \mprj_pads.hldh_n[15] ; |
| wire \mprj_pads.hldh_n[16] ; |
| wire \mprj_pads.hldh_n[17] ; |
| wire \mprj_pads.hldh_n[18] ; |
| wire \mprj_pads.hldh_n[19] ; |
| wire \mprj_pads.hldh_n[1] ; |
| wire \mprj_pads.hldh_n[20] ; |
| wire \mprj_pads.hldh_n[21] ; |
| wire \mprj_pads.hldh_n[22] ; |
| wire \mprj_pads.hldh_n[23] ; |
| wire \mprj_pads.hldh_n[24] ; |
| wire \mprj_pads.hldh_n[25] ; |
| wire \mprj_pads.hldh_n[26] ; |
| wire \mprj_pads.hldh_n[27] ; |
| wire \mprj_pads.hldh_n[28] ; |
| wire \mprj_pads.hldh_n[29] ; |
| wire \mprj_pads.hldh_n[2] ; |
| wire \mprj_pads.hldh_n[30] ; |
| wire \mprj_pads.hldh_n[31] ; |
| wire \mprj_pads.hldh_n[32] ; |
| wire \mprj_pads.hldh_n[33] ; |
| wire \mprj_pads.hldh_n[34] ; |
| wire \mprj_pads.hldh_n[35] ; |
| wire \mprj_pads.hldh_n[36] ; |
| wire \mprj_pads.hldh_n[37] ; |
| wire \mprj_pads.hldh_n[3] ; |
| wire \mprj_pads.hldh_n[4] ; |
| wire \mprj_pads.hldh_n[5] ; |
| wire \mprj_pads.hldh_n[6] ; |
| wire \mprj_pads.hldh_n[7] ; |
| wire \mprj_pads.hldh_n[8] ; |
| wire \mprj_pads.hldh_n[9] ; |
| wire \mprj_pads.holdover[0] ; |
| wire \mprj_pads.holdover[10] ; |
| wire \mprj_pads.holdover[11] ; |
| wire \mprj_pads.holdover[12] ; |
| wire \mprj_pads.holdover[13] ; |
| wire \mprj_pads.holdover[14] ; |
| wire \mprj_pads.holdover[15] ; |
| wire \mprj_pads.holdover[16] ; |
| wire \mprj_pads.holdover[17] ; |
| wire \mprj_pads.holdover[18] ; |
| wire \mprj_pads.holdover[19] ; |
| wire \mprj_pads.holdover[1] ; |
| wire \mprj_pads.holdover[20] ; |
| wire \mprj_pads.holdover[21] ; |
| wire \mprj_pads.holdover[22] ; |
| wire \mprj_pads.holdover[23] ; |
| wire \mprj_pads.holdover[24] ; |
| wire \mprj_pads.holdover[25] ; |
| wire \mprj_pads.holdover[26] ; |
| wire \mprj_pads.holdover[27] ; |
| wire \mprj_pads.holdover[28] ; |
| wire \mprj_pads.holdover[29] ; |
| wire \mprj_pads.holdover[2] ; |
| wire \mprj_pads.holdover[30] ; |
| wire \mprj_pads.holdover[31] ; |
| wire \mprj_pads.holdover[32] ; |
| wire \mprj_pads.holdover[33] ; |
| wire \mprj_pads.holdover[34] ; |
| wire \mprj_pads.holdover[35] ; |
| wire \mprj_pads.holdover[36] ; |
| wire \mprj_pads.holdover[37] ; |
| wire \mprj_pads.holdover[3] ; |
| wire \mprj_pads.holdover[4] ; |
| wire \mprj_pads.holdover[5] ; |
| wire \mprj_pads.holdover[6] ; |
| wire \mprj_pads.holdover[7] ; |
| wire \mprj_pads.holdover[8] ; |
| wire \mprj_pads.holdover[9] ; |
| wire \mprj_pads.ib_mode_sel[0] ; |
| wire \mprj_pads.ib_mode_sel[10] ; |
| wire \mprj_pads.ib_mode_sel[11] ; |
| wire \mprj_pads.ib_mode_sel[12] ; |
| wire \mprj_pads.ib_mode_sel[13] ; |
| wire \mprj_pads.ib_mode_sel[14] ; |
| wire \mprj_pads.ib_mode_sel[15] ; |
| wire \mprj_pads.ib_mode_sel[16] ; |
| wire \mprj_pads.ib_mode_sel[17] ; |
| wire \mprj_pads.ib_mode_sel[18] ; |
| wire \mprj_pads.ib_mode_sel[19] ; |
| wire \mprj_pads.ib_mode_sel[1] ; |
| wire \mprj_pads.ib_mode_sel[20] ; |
| wire \mprj_pads.ib_mode_sel[21] ; |
| wire \mprj_pads.ib_mode_sel[22] ; |
| wire \mprj_pads.ib_mode_sel[23] ; |
| wire \mprj_pads.ib_mode_sel[24] ; |
| wire \mprj_pads.ib_mode_sel[25] ; |
| wire \mprj_pads.ib_mode_sel[26] ; |
| wire \mprj_pads.ib_mode_sel[27] ; |
| wire \mprj_pads.ib_mode_sel[28] ; |
| wire \mprj_pads.ib_mode_sel[29] ; |
| wire \mprj_pads.ib_mode_sel[2] ; |
| wire \mprj_pads.ib_mode_sel[30] ; |
| wire \mprj_pads.ib_mode_sel[31] ; |
| wire \mprj_pads.ib_mode_sel[32] ; |
| wire \mprj_pads.ib_mode_sel[33] ; |
| wire \mprj_pads.ib_mode_sel[34] ; |
| wire \mprj_pads.ib_mode_sel[35] ; |
| wire \mprj_pads.ib_mode_sel[36] ; |
| wire \mprj_pads.ib_mode_sel[37] ; |
| wire \mprj_pads.ib_mode_sel[3] ; |
| wire \mprj_pads.ib_mode_sel[4] ; |
| wire \mprj_pads.ib_mode_sel[5] ; |
| wire \mprj_pads.ib_mode_sel[6] ; |
| wire \mprj_pads.ib_mode_sel[7] ; |
| wire \mprj_pads.ib_mode_sel[8] ; |
| wire \mprj_pads.ib_mode_sel[9] ; |
| wire \mprj_pads.inp_dis[0] ; |
| wire \mprj_pads.inp_dis[10] ; |
| wire \mprj_pads.inp_dis[11] ; |
| wire \mprj_pads.inp_dis[12] ; |
| wire \mprj_pads.inp_dis[13] ; |
| wire \mprj_pads.inp_dis[14] ; |
| wire \mprj_pads.inp_dis[15] ; |
| wire \mprj_pads.inp_dis[16] ; |
| wire \mprj_pads.inp_dis[17] ; |
| wire \mprj_pads.inp_dis[18] ; |
| wire \mprj_pads.inp_dis[19] ; |
| wire \mprj_pads.inp_dis[1] ; |
| wire \mprj_pads.inp_dis[20] ; |
| wire \mprj_pads.inp_dis[21] ; |
| wire \mprj_pads.inp_dis[22] ; |
| wire \mprj_pads.inp_dis[23] ; |
| wire \mprj_pads.inp_dis[24] ; |
| wire \mprj_pads.inp_dis[25] ; |
| wire \mprj_pads.inp_dis[26] ; |
| wire \mprj_pads.inp_dis[27] ; |
| wire \mprj_pads.inp_dis[28] ; |
| wire \mprj_pads.inp_dis[29] ; |
| wire \mprj_pads.inp_dis[2] ; |
| wire \mprj_pads.inp_dis[30] ; |
| wire \mprj_pads.inp_dis[31] ; |
| wire \mprj_pads.inp_dis[32] ; |
| wire \mprj_pads.inp_dis[33] ; |
| wire \mprj_pads.inp_dis[34] ; |
| wire \mprj_pads.inp_dis[35] ; |
| wire \mprj_pads.inp_dis[36] ; |
| wire \mprj_pads.inp_dis[37] ; |
| wire \mprj_pads.inp_dis[3] ; |
| wire \mprj_pads.inp_dis[4] ; |
| wire \mprj_pads.inp_dis[5] ; |
| wire \mprj_pads.inp_dis[6] ; |
| wire \mprj_pads.inp_dis[7] ; |
| wire \mprj_pads.inp_dis[8] ; |
| wire \mprj_pads.inp_dis[9] ; |
| wire \mprj_pads.io[0] ; |
| wire \mprj_pads.io[10] ; |
| wire \mprj_pads.io[11] ; |
| wire \mprj_pads.io[12] ; |
| wire \mprj_pads.io[13] ; |
| wire \mprj_pads.io[14] ; |
| wire \mprj_pads.io[15] ; |
| wire \mprj_pads.io[16] ; |
| wire \mprj_pads.io[17] ; |
| wire \mprj_pads.io[18] ; |
| wire \mprj_pads.io[19] ; |
| wire \mprj_pads.io[1] ; |
| wire \mprj_pads.io[20] ; |
| wire \mprj_pads.io[21] ; |
| wire \mprj_pads.io[22] ; |
| wire \mprj_pads.io[23] ; |
| wire \mprj_pads.io[24] ; |
| wire \mprj_pads.io[25] ; |
| wire \mprj_pads.io[26] ; |
| wire \mprj_pads.io[27] ; |
| wire \mprj_pads.io[28] ; |
| wire \mprj_pads.io[29] ; |
| wire \mprj_pads.io[2] ; |
| wire \mprj_pads.io[30] ; |
| wire \mprj_pads.io[31] ; |
| wire \mprj_pads.io[32] ; |
| wire \mprj_pads.io[33] ; |
| wire \mprj_pads.io[34] ; |
| wire \mprj_pads.io[35] ; |
| wire \mprj_pads.io[36] ; |
| wire \mprj_pads.io[37] ; |
| wire \mprj_pads.io[3] ; |
| wire \mprj_pads.io[4] ; |
| wire \mprj_pads.io[5] ; |
| wire \mprj_pads.io[6] ; |
| wire \mprj_pads.io[7] ; |
| wire \mprj_pads.io[8] ; |
| wire \mprj_pads.io[9] ; |
| wire \mprj_pads.io_in[0] ; |
| wire \mprj_pads.io_in[10] ; |
| wire \mprj_pads.io_in[11] ; |
| wire \mprj_pads.io_in[12] ; |
| wire \mprj_pads.io_in[13] ; |
| wire \mprj_pads.io_in[14] ; |
| wire \mprj_pads.io_in[15] ; |
| wire \mprj_pads.io_in[16] ; |
| wire \mprj_pads.io_in[17] ; |
| wire \mprj_pads.io_in[18] ; |
| wire \mprj_pads.io_in[19] ; |
| wire \mprj_pads.io_in[1] ; |
| wire \mprj_pads.io_in[20] ; |
| wire \mprj_pads.io_in[21] ; |
| wire \mprj_pads.io_in[22] ; |
| wire \mprj_pads.io_in[23] ; |
| wire \mprj_pads.io_in[24] ; |
| wire \mprj_pads.io_in[25] ; |
| wire \mprj_pads.io_in[26] ; |
| wire \mprj_pads.io_in[27] ; |
| wire \mprj_pads.io_in[28] ; |
| wire \mprj_pads.io_in[29] ; |
| wire \mprj_pads.io_in[2] ; |
| wire \mprj_pads.io_in[30] ; |
| wire \mprj_pads.io_in[31] ; |
| wire \mprj_pads.io_in[32] ; |
| wire \mprj_pads.io_in[33] ; |
| wire \mprj_pads.io_in[34] ; |
| wire \mprj_pads.io_in[35] ; |
| wire \mprj_pads.io_in[36] ; |
| wire \mprj_pads.io_in[37] ; |
| wire \mprj_pads.io_in[3] ; |
| wire \mprj_pads.io_in[4] ; |
| wire \mprj_pads.io_in[5] ; |
| wire \mprj_pads.io_in[6] ; |
| wire \mprj_pads.io_in[7] ; |
| wire \mprj_pads.io_in[8] ; |
| wire \mprj_pads.io_in[9] ; |
| wire \mprj_pads.io_out[0] ; |
| wire \mprj_pads.io_out[10] ; |
| wire \mprj_pads.io_out[11] ; |
| wire \mprj_pads.io_out[12] ; |
| wire \mprj_pads.io_out[13] ; |
| wire \mprj_pads.io_out[14] ; |
| wire \mprj_pads.io_out[15] ; |
| wire \mprj_pads.io_out[16] ; |
| wire \mprj_pads.io_out[17] ; |
| wire \mprj_pads.io_out[18] ; |
| wire \mprj_pads.io_out[19] ; |
| wire \mprj_pads.io_out[1] ; |
| wire \mprj_pads.io_out[20] ; |
| wire \mprj_pads.io_out[21] ; |
| wire \mprj_pads.io_out[22] ; |
| wire \mprj_pads.io_out[23] ; |
| wire \mprj_pads.io_out[24] ; |
| wire \mprj_pads.io_out[25] ; |
| wire \mprj_pads.io_out[26] ; |
| wire \mprj_pads.io_out[27] ; |
| wire \mprj_pads.io_out[28] ; |
| wire \mprj_pads.io_out[29] ; |
| wire \mprj_pads.io_out[2] ; |
| wire \mprj_pads.io_out[30] ; |
| wire \mprj_pads.io_out[31] ; |
| wire \mprj_pads.io_out[32] ; |
| wire \mprj_pads.io_out[33] ; |
| wire \mprj_pads.io_out[34] ; |
| wire \mprj_pads.io_out[35] ; |
| wire \mprj_pads.io_out[36] ; |
| wire \mprj_pads.io_out[37] ; |
| wire \mprj_pads.io_out[3] ; |
| wire \mprj_pads.io_out[4] ; |
| wire \mprj_pads.io_out[5] ; |
| wire \mprj_pads.io_out[6] ; |
| wire \mprj_pads.io_out[7] ; |
| wire \mprj_pads.io_out[8] ; |
| wire \mprj_pads.io_out[9] ; |
| wire \mprj_pads.loop1_io[0] ; |
| wire \mprj_pads.loop1_io[10] ; |
| wire \mprj_pads.loop1_io[11] ; |
| wire \mprj_pads.loop1_io[12] ; |
| wire \mprj_pads.loop1_io[13] ; |
| wire \mprj_pads.loop1_io[14] ; |
| wire \mprj_pads.loop1_io[15] ; |
| wire \mprj_pads.loop1_io[16] ; |
| wire \mprj_pads.loop1_io[17] ; |
| wire \mprj_pads.loop1_io[18] ; |
| wire \mprj_pads.loop1_io[19] ; |
| wire \mprj_pads.loop1_io[1] ; |
| wire \mprj_pads.loop1_io[20] ; |
| wire \mprj_pads.loop1_io[21] ; |
| wire \mprj_pads.loop1_io[22] ; |
| wire \mprj_pads.loop1_io[23] ; |
| wire \mprj_pads.loop1_io[24] ; |
| wire \mprj_pads.loop1_io[25] ; |
| wire \mprj_pads.loop1_io[26] ; |
| wire \mprj_pads.loop1_io[27] ; |
| wire \mprj_pads.loop1_io[28] ; |
| wire \mprj_pads.loop1_io[29] ; |
| wire \mprj_pads.loop1_io[2] ; |
| wire \mprj_pads.loop1_io[30] ; |
| wire \mprj_pads.loop1_io[31] ; |
| wire \mprj_pads.loop1_io[32] ; |
| wire \mprj_pads.loop1_io[33] ; |
| wire \mprj_pads.loop1_io[34] ; |
| wire \mprj_pads.loop1_io[35] ; |
| wire \mprj_pads.loop1_io[36] ; |
| wire \mprj_pads.loop1_io[37] ; |
| wire \mprj_pads.loop1_io[3] ; |
| wire \mprj_pads.loop1_io[4] ; |
| wire \mprj_pads.loop1_io[5] ; |
| wire \mprj_pads.loop1_io[6] ; |
| wire \mprj_pads.loop1_io[7] ; |
| wire \mprj_pads.loop1_io[8] ; |
| wire \mprj_pads.loop1_io[9] ; |
| wire \mprj_pads.no_connect[0] ; |
| wire \mprj_pads.no_connect[1] ; |
| wire \mprj_pads.no_connect[2] ; |
| wire \mprj_pads.no_connect[3] ; |
| wire \mprj_pads.no_connect[4] ; |
| wire \mprj_pads.no_connect[5] ; |
| wire \mprj_pads.no_connect[6] ; |
| wire \mprj_pads.oeb[0] ; |
| wire \mprj_pads.oeb[10] ; |
| wire \mprj_pads.oeb[11] ; |
| wire \mprj_pads.oeb[12] ; |
| wire \mprj_pads.oeb[13] ; |
| wire \mprj_pads.oeb[14] ; |
| wire \mprj_pads.oeb[15] ; |
| wire \mprj_pads.oeb[16] ; |
| wire \mprj_pads.oeb[17] ; |
| wire \mprj_pads.oeb[18] ; |
| wire \mprj_pads.oeb[19] ; |
| wire \mprj_pads.oeb[1] ; |
| wire \mprj_pads.oeb[20] ; |
| wire \mprj_pads.oeb[21] ; |
| wire \mprj_pads.oeb[22] ; |
| wire \mprj_pads.oeb[23] ; |
| wire \mprj_pads.oeb[24] ; |
| wire \mprj_pads.oeb[25] ; |
| wire \mprj_pads.oeb[26] ; |
| wire \mprj_pads.oeb[27] ; |
| wire \mprj_pads.oeb[28] ; |
| wire \mprj_pads.oeb[29] ; |
| wire \mprj_pads.oeb[2] ; |
| wire \mprj_pads.oeb[30] ; |
| wire \mprj_pads.oeb[31] ; |
| wire \mprj_pads.oeb[32] ; |
| wire \mprj_pads.oeb[33] ; |
| wire \mprj_pads.oeb[34] ; |
| wire \mprj_pads.oeb[35] ; |
| wire \mprj_pads.oeb[36] ; |
| wire \mprj_pads.oeb[37] ; |
| wire \mprj_pads.oeb[3] ; |
| wire \mprj_pads.oeb[4] ; |
| wire \mprj_pads.oeb[5] ; |
| wire \mprj_pads.oeb[6] ; |
| wire \mprj_pads.oeb[7] ; |
| wire \mprj_pads.oeb[8] ; |
| wire \mprj_pads.oeb[9] ; |
| wire \mprj_pads.porb_h ; |
| wire \mprj_pads.slow_sel[0] ; |
| wire \mprj_pads.slow_sel[10] ; |
| wire \mprj_pads.slow_sel[11] ; |
| wire \mprj_pads.slow_sel[12] ; |
| wire \mprj_pads.slow_sel[13] ; |
| wire \mprj_pads.slow_sel[14] ; |
| wire \mprj_pads.slow_sel[15] ; |
| wire \mprj_pads.slow_sel[16] ; |
| wire \mprj_pads.slow_sel[17] ; |
| wire \mprj_pads.slow_sel[18] ; |
| wire \mprj_pads.slow_sel[19] ; |
| wire \mprj_pads.slow_sel[1] ; |
| wire \mprj_pads.slow_sel[20] ; |
| wire \mprj_pads.slow_sel[21] ; |
| wire \mprj_pads.slow_sel[22] ; |
| wire \mprj_pads.slow_sel[23] ; |
| wire \mprj_pads.slow_sel[24] ; |
| wire \mprj_pads.slow_sel[25] ; |
| wire \mprj_pads.slow_sel[26] ; |
| wire \mprj_pads.slow_sel[27] ; |
| wire \mprj_pads.slow_sel[28] ; |
| wire \mprj_pads.slow_sel[29] ; |
| wire \mprj_pads.slow_sel[2] ; |
| wire \mprj_pads.slow_sel[30] ; |
| wire \mprj_pads.slow_sel[31] ; |
| wire \mprj_pads.slow_sel[32] ; |
| wire \mprj_pads.slow_sel[33] ; |
| wire \mprj_pads.slow_sel[34] ; |
| wire \mprj_pads.slow_sel[35] ; |
| wire \mprj_pads.slow_sel[36] ; |
| wire \mprj_pads.slow_sel[37] ; |
| wire \mprj_pads.slow_sel[3] ; |
| wire \mprj_pads.slow_sel[4] ; |
| wire \mprj_pads.slow_sel[5] ; |
| wire \mprj_pads.slow_sel[6] ; |
| wire \mprj_pads.slow_sel[7] ; |
| wire \mprj_pads.slow_sel[8] ; |
| wire \mprj_pads.slow_sel[9] ; |
| wire \mprj_pads.vccd ; |
| wire \mprj_pads.vccd1 ; |
| wire \mprj_pads.vccd2 ; |
| wire \mprj_pads.vdda ; |
| wire \mprj_pads.vdda1 ; |
| wire \mprj_pads.vdda2 ; |
| wire \mprj_pads.vddio ; |
| wire \mprj_pads.vddio_q ; |
| wire \mprj_pads.vssa ; |
| wire \mprj_pads.vssa1 ; |
| wire \mprj_pads.vssa2 ; |
| wire \mprj_pads.vssd ; |
| wire \mprj_pads.vssd1 ; |
| wire \mprj_pads.vssd2 ; |
| wire \mprj_pads.vssio ; |
| wire \mprj_pads.vssio_q ; |
| wire \mprj_pads.vtrip_sel[0] ; |
| wire \mprj_pads.vtrip_sel[10] ; |
| wire \mprj_pads.vtrip_sel[11] ; |
| wire \mprj_pads.vtrip_sel[12] ; |
| wire \mprj_pads.vtrip_sel[13] ; |
| wire \mprj_pads.vtrip_sel[14] ; |
| wire \mprj_pads.vtrip_sel[15] ; |
| wire \mprj_pads.vtrip_sel[16] ; |
| wire \mprj_pads.vtrip_sel[17] ; |
| wire \mprj_pads.vtrip_sel[18] ; |
| wire \mprj_pads.vtrip_sel[19] ; |
| wire \mprj_pads.vtrip_sel[1] ; |
| wire \mprj_pads.vtrip_sel[20] ; |
| wire \mprj_pads.vtrip_sel[21] ; |
| wire \mprj_pads.vtrip_sel[22] ; |
| wire \mprj_pads.vtrip_sel[23] ; |
| wire \mprj_pads.vtrip_sel[24] ; |
| wire \mprj_pads.vtrip_sel[25] ; |
| wire \mprj_pads.vtrip_sel[26] ; |
| wire \mprj_pads.vtrip_sel[27] ; |
| wire \mprj_pads.vtrip_sel[28] ; |
| wire \mprj_pads.vtrip_sel[29] ; |
| wire \mprj_pads.vtrip_sel[2] ; |
| wire \mprj_pads.vtrip_sel[30] ; |
| wire \mprj_pads.vtrip_sel[31] ; |
| wire \mprj_pads.vtrip_sel[32] ; |
| wire \mprj_pads.vtrip_sel[33] ; |
| wire \mprj_pads.vtrip_sel[34] ; |
| wire \mprj_pads.vtrip_sel[35] ; |
| wire \mprj_pads.vtrip_sel[36] ; |
| wire \mprj_pads.vtrip_sel[37] ; |
| wire \mprj_pads.vtrip_sel[3] ; |
| wire \mprj_pads.vtrip_sel[4] ; |
| wire \mprj_pads.vtrip_sel[5] ; |
| wire \mprj_pads.vtrip_sel[6] ; |
| wire \mprj_pads.vtrip_sel[7] ; |
| wire \mprj_pads.vtrip_sel[8] ; |
| wire \mprj_pads.vtrip_sel[9] ; |
| input por; |
| input porb_h; |
| input resetb; |
| output resetb_core_h; |
| inout vccd; |
| inout vccd1; |
| inout vccd2; |
| inout vdda; |
| inout vdda1; |
| inout vdda2; |
| inout vddio; |
| wire vddio_q; |
| inout vssa; |
| inout vssa1; |
| inout vssa2; |
| inout vssd; |
| inout vssd1; |
| inout vssd2; |
| inout vssio; |
| wire vssio_q; |
| wire xresloop; |
| sky130_ef_io__gpiov2_pad_wrapped clock_pad ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(vssd), |
| .ANALOG_POL(vssd), |
| .ANALOG_SEL(vssd), |
| .DM({ vssd, vssd, vccd }), |
| .ENABLE_H(porb_h), |
| .ENABLE_INP_H(loop_clock), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssa), |
| .HLD_H_N(vddio), |
| .HLD_OVR(vssd), |
| .IB_MODE_SEL(vssd), |
| .IN(clock_core), |
| .INP_DIS(por), |
| .IN_H(), |
| .OE_N(vccd), |
| .OUT(vssd), |
| .PAD(clock), |
| .PAD_A_ESD_0_H(), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(vssd), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(loop_clock), |
| .VCCD(vccd), |
| .VCCHIB(vccd), |
| .VDDA(vdda), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa), |
| .VSSD(vssd), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(vssd) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped flash_clk_pad ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(vssd), |
| .ANALOG_POL(vssd), |
| .ANALOG_SEL(vssd), |
| .DM({ vccd, vccd, vssd }), |
| .ENABLE_H(porb_h), |
| .ENABLE_INP_H(loop_flash_clk), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssa), |
| .HLD_H_N(vddio), |
| .HLD_OVR(vssd), |
| .IB_MODE_SEL(vssd), |
| .IN(), |
| .INP_DIS(flash_clk_ieb_core), |
| .IN_H(), |
| .OE_N(flash_clk_oeb_core), |
| .OUT(flash_clk_core), |
| .PAD(flash_clk), |
| .PAD_A_ESD_0_H(), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(vssd), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(loop_flash_clk), |
| .VCCD(vccd), |
| .VCCHIB(vccd), |
| .VDDA(vdda), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa), |
| .VSSD(vssd), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(vssd) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped flash_csb_pad ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(vssd), |
| .ANALOG_POL(vssd), |
| .ANALOG_SEL(vssd), |
| .DM({ vccd, vccd, vssd }), |
| .ENABLE_H(porb_h), |
| .ENABLE_INP_H(loop_flash_csb), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssa), |
| .HLD_H_N(vddio), |
| .HLD_OVR(vssd), |
| .IB_MODE_SEL(vssd), |
| .IN(), |
| .INP_DIS(flash_csb_ieb_core), |
| .IN_H(), |
| .OE_N(flash_csb_oeb_core), |
| .OUT(flash_csb_core), |
| .PAD(flash_csb), |
| .PAD_A_ESD_0_H(), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(vssd), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(loop_flash_csb), |
| .VCCD(vccd), |
| .VCCHIB(vccd), |
| .VDDA(vdda), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa), |
| .VSSD(vssd), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(vssd) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped flash_io0_pad ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(vssd), |
| .ANALOG_POL(vssd), |
| .ANALOG_SEL(vssd), |
| .DM({ flash_io0_ieb_core, flash_io0_ieb_core, flash_io0_oeb_core }), |
| .ENABLE_H(porb_h), |
| .ENABLE_INP_H(loop_flash_io0), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssa), |
| .HLD_H_N(vddio), |
| .HLD_OVR(vssd), |
| .IB_MODE_SEL(vssd), |
| .IN(flash_io0_di_core), |
| .INP_DIS(flash_io0_ieb_core), |
| .IN_H(), |
| .OE_N(flash_io0_oeb_core), |
| .OUT(flash_io0_do_core), |
| .PAD(flash_io0), |
| .PAD_A_ESD_0_H(), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(vssd), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(loop_flash_io0), |
| .VCCD(vccd), |
| .VCCHIB(vccd), |
| .VDDA(vdda), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa), |
| .VSSD(vssd), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(vssd) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped flash_io1_pad ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(vssd), |
| .ANALOG_POL(vssd), |
| .ANALOG_SEL(vssd), |
| .DM({ flash_io1_ieb_core, flash_io1_ieb_core, flash_io1_oeb_core }), |
| .ENABLE_H(porb_h), |
| .ENABLE_INP_H(loop_flash_io1), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssa), |
| .HLD_H_N(vddio), |
| .HLD_OVR(vssd), |
| .IB_MODE_SEL(vssd), |
| .IN(flash_io1_di_core), |
| .INP_DIS(flash_io1_ieb_core), |
| .IN_H(), |
| .OE_N(flash_io1_oeb_core), |
| .OUT(flash_io1_do_core), |
| .PAD(flash_io1), |
| .PAD_A_ESD_0_H(), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(vssd), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(loop_flash_io1), |
| .VCCD(vccd), |
| .VCCHIB(vccd), |
| .VDDA(vdda), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa), |
| .VSSD(vssd), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(vssd) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped gpio_pad ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(vssd), |
| .ANALOG_POL(vssd), |
| .ANALOG_SEL(vssd), |
| .DM({ gpio_mode1_core, gpio_mode1_core, gpio_mode0_core }), |
| .ENABLE_H(porb_h), |
| .ENABLE_INP_H(loop_gpio), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssa), |
| .HLD_H_N(vddio), |
| .HLD_OVR(vssd), |
| .IB_MODE_SEL(vssd), |
| .IN(gpio_in_core), |
| .INP_DIS(gpio_inenb_core), |
| .IN_H(), |
| .OE_N(gpio_outenb_core), |
| .OUT(gpio_out_core), |
| .PAD(gpio), |
| .PAD_A_ESD_0_H(), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(vssd), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(loop_gpio), |
| .VCCD(vccd), |
| .VCCHIB(vccd), |
| .VDDA(vdda), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa), |
| .VSSD(vssd), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(vssd) |
| ); |
| sky130_ef_io__corner_pad \mgmt_corner[0] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .VCCD(vccd), |
| .VCCHIB(vccd), |
| .VDDA(vdda), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa), |
| .VSSD(vssd), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__corner_pad \mgmt_corner[1] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .VCCD(vccd), |
| .VCCHIB(vccd), |
| .VDDA(vdda), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa), |
| .VSSD(vssd), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__vccd_lvc_pad mgmt_vccd_lvclamp_pad ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .BDY2_B2B(vssa), |
| .DRN_LVC1(vccd), |
| .DRN_LVC2(vccd), |
| .SRC_BDY_LVC1(vssio), |
| .SRC_BDY_LVC2(vssd), |
| .VCCD(vccd), |
| .VCCHIB(vccd), |
| .VDDA(vdda), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa), |
| .VSSD(vssd), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__vdda_hvc_pad mgmt_vdda_hvclamp_pad ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .DRN_HVC(vdda), |
| .SRC_BDY_HVC(vssa), |
| .VCCD(vccd), |
| .VCCHIB(vccd), |
| .VDDA(vdda), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa), |
| .VSSD(vssd), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__vddio_hvc_pad \mgmt_vddio_hvclamp_pad[0] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .DRN_HVC(vddio), |
| .SRC_BDY_HVC(vssio), |
| .VCCD(vccd), |
| .VCCHIB(vccd), |
| .VDDA(vdda), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa), |
| .VSSD(vssd), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__vddio_hvc_pad \mgmt_vddio_hvclamp_pad[1] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .DRN_HVC(vddio), |
| .SRC_BDY_HVC(vssio), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__vssa_hvc_pad mgmt_vssa_hvclamp_pad ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .DRN_HVC(vdda), |
| .SRC_BDY_HVC(vssa), |
| .VCCD(vccd), |
| .VCCHIB(vccd), |
| .VDDA(vdda), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa), |
| .VSSD(vssd), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__vssd_lvc_pad mgmt_vssd_lvclmap_pad ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .BDY2_B2B(vssa), |
| .DRN_LVC1(vccd), |
| .DRN_LVC2(vccd), |
| .SRC_BDY_LVC1(vssio), |
| .SRC_BDY_LVC2(vssd), |
| .VCCD(vccd), |
| .VCCHIB(vccd), |
| .VDDA(vdda), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa), |
| .VSSD(vssd), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__vssio_hvc_pad \mgmt_vssio_hvclamp_pad[0] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .DRN_HVC(vddio), |
| .SRC_BDY_HVC(vssio), |
| .VCCD(vccd), |
| .VCCHIB(vccd), |
| .VDDA(vdda), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa), |
| .VSSD(vssd), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__vssio_hvc_pad \mgmt_vssio_hvclamp_pad[1] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .DRN_HVC(vddio), |
| .SRC_BDY_HVC(vssio), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area1_io_pad[0] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[0]), |
| .ANALOG_POL(mprj_io_analog_pol[0]), |
| .ANALOG_SEL(mprj_io_analog_sel[0]), |
| .DM(mprj_io_dm[2:0]), |
| .ENABLE_H(mprj_io_enh[0]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[0] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[0]), |
| .HLD_OVR(mprj_io_holdover[0]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[0]), |
| .IN(\mprj_pads.io_in[0] ), |
| .INP_DIS(mprj_io_inp_dis[0]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[0]), |
| .OUT(mprj_io_out[0]), |
| .PAD(mprj_io[0]), |
| .PAD_A_ESD_0_H(\mprj_pads.no_connect[0] ), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[0]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[0] ), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[0]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area1_io_pad[10] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[10]), |
| .ANALOG_POL(mprj_io_analog_pol[10]), |
| .ANALOG_SEL(mprj_io_analog_sel[10]), |
| .DM(mprj_io_dm[32:30]), |
| .ENABLE_H(mprj_io_enh[10]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[10] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[10]), |
| .HLD_OVR(mprj_io_holdover[10]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[10]), |
| .IN(\mprj_pads.io_in[10] ), |
| .INP_DIS(mprj_io_inp_dis[10]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[10]), |
| .OUT(mprj_io_out[10]), |
| .PAD(mprj_io[10]), |
| .PAD_A_ESD_0_H(mprj_analog_io[3]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[10]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[10] ), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[10]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area1_io_pad[11] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[11]), |
| .ANALOG_POL(mprj_io_analog_pol[11]), |
| .ANALOG_SEL(mprj_io_analog_sel[11]), |
| .DM(mprj_io_dm[35:33]), |
| .ENABLE_H(mprj_io_enh[11]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[11] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[11]), |
| .HLD_OVR(mprj_io_holdover[11]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[11]), |
| .IN(\mprj_pads.io_in[11] ), |
| .INP_DIS(mprj_io_inp_dis[11]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[11]), |
| .OUT(mprj_io_out[11]), |
| .PAD(mprj_io[11]), |
| .PAD_A_ESD_0_H(mprj_analog_io[4]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[11]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[11] ), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[11]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area1_io_pad[12] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[12]), |
| .ANALOG_POL(mprj_io_analog_pol[12]), |
| .ANALOG_SEL(mprj_io_analog_sel[12]), |
| .DM(mprj_io_dm[38:36]), |
| .ENABLE_H(mprj_io_enh[12]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[12] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[12]), |
| .HLD_OVR(mprj_io_holdover[12]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[12]), |
| .IN(\mprj_pads.io_in[12] ), |
| .INP_DIS(mprj_io_inp_dis[12]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[12]), |
| .OUT(mprj_io_out[12]), |
| .PAD(mprj_io[12]), |
| .PAD_A_ESD_0_H(mprj_analog_io[5]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[12]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[12] ), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[12]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area1_io_pad[13] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[13]), |
| .ANALOG_POL(mprj_io_analog_pol[13]), |
| .ANALOG_SEL(mprj_io_analog_sel[13]), |
| .DM(mprj_io_dm[41:39]), |
| .ENABLE_H(mprj_io_enh[13]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[13] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[13]), |
| .HLD_OVR(mprj_io_holdover[13]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[13]), |
| .IN(\mprj_pads.io_in[13] ), |
| .INP_DIS(mprj_io_inp_dis[13]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[13]), |
| .OUT(mprj_io_out[13]), |
| .PAD(mprj_io[13]), |
| .PAD_A_ESD_0_H(mprj_analog_io[6]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[13]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[13] ), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[13]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area1_io_pad[14] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[14]), |
| .ANALOG_POL(mprj_io_analog_pol[14]), |
| .ANALOG_SEL(mprj_io_analog_sel[14]), |
| .DM(mprj_io_dm[44:42]), |
| .ENABLE_H(mprj_io_enh[14]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[14] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[14]), |
| .HLD_OVR(mprj_io_holdover[14]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[14]), |
| .IN(\mprj_pads.io_in[14] ), |
| .INP_DIS(mprj_io_inp_dis[14]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[14]), |
| .OUT(mprj_io_out[14]), |
| .PAD(mprj_io[14]), |
| .PAD_A_ESD_0_H(mprj_analog_io[7]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[14]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[14] ), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[14]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area1_io_pad[15] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[15]), |
| .ANALOG_POL(mprj_io_analog_pol[15]), |
| .ANALOG_SEL(mprj_io_analog_sel[15]), |
| .DM(mprj_io_dm[47:45]), |
| .ENABLE_H(mprj_io_enh[15]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[15] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[15]), |
| .HLD_OVR(mprj_io_holdover[15]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[15]), |
| .IN(\mprj_pads.io_in[15] ), |
| .INP_DIS(mprj_io_inp_dis[15]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[15]), |
| .OUT(mprj_io_out[15]), |
| .PAD(mprj_io[15]), |
| .PAD_A_ESD_0_H(mprj_analog_io[8]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[15]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[15] ), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[15]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area1_io_pad[16] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[16]), |
| .ANALOG_POL(mprj_io_analog_pol[16]), |
| .ANALOG_SEL(mprj_io_analog_sel[16]), |
| .DM(mprj_io_dm[50:48]), |
| .ENABLE_H(mprj_io_enh[16]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[16] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[16]), |
| .HLD_OVR(mprj_io_holdover[16]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[16]), |
| .IN(\mprj_pads.io_in[16] ), |
| .INP_DIS(mprj_io_inp_dis[16]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[16]), |
| .OUT(mprj_io_out[16]), |
| .PAD(mprj_io[16]), |
| .PAD_A_ESD_0_H(mprj_analog_io[9]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[16]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[16] ), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[16]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area1_io_pad[17] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[17]), |
| .ANALOG_POL(mprj_io_analog_pol[17]), |
| .ANALOG_SEL(mprj_io_analog_sel[17]), |
| .DM(mprj_io_dm[53:51]), |
| .ENABLE_H(mprj_io_enh[17]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[17] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[17]), |
| .HLD_OVR(mprj_io_holdover[17]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[17]), |
| .IN(\mprj_pads.io_in[17] ), |
| .INP_DIS(mprj_io_inp_dis[17]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[17]), |
| .OUT(mprj_io_out[17]), |
| .PAD(mprj_io[17]), |
| .PAD_A_ESD_0_H(mprj_analog_io[10]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[17]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[17] ), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[17]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area1_io_pad[1] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[1]), |
| .ANALOG_POL(mprj_io_analog_pol[1]), |
| .ANALOG_SEL(mprj_io_analog_sel[1]), |
| .DM(mprj_io_dm[5:3]), |
| .ENABLE_H(mprj_io_enh[1]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[1] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[1]), |
| .HLD_OVR(mprj_io_holdover[1]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[1]), |
| .IN(\mprj_pads.io_in[1] ), |
| .INP_DIS(mprj_io_inp_dis[1]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[1]), |
| .OUT(mprj_io_out[1]), |
| .PAD(mprj_io[1]), |
| .PAD_A_ESD_0_H(\mprj_pads.no_connect[1] ), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[1]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[1] ), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[1]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area1_io_pad[2] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[2]), |
| .ANALOG_POL(mprj_io_analog_pol[2]), |
| .ANALOG_SEL(mprj_io_analog_sel[2]), |
| .DM(mprj_io_dm[8:6]), |
| .ENABLE_H(mprj_io_enh[2]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[2] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[2]), |
| .HLD_OVR(mprj_io_holdover[2]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[2]), |
| .IN(\mprj_pads.io_in[2] ), |
| .INP_DIS(mprj_io_inp_dis[2]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[2]), |
| .OUT(mprj_io_out[2]), |
| .PAD(mprj_io[2]), |
| .PAD_A_ESD_0_H(\mprj_pads.no_connect[2] ), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[2]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[2] ), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[2]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area1_io_pad[3] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[3]), |
| .ANALOG_POL(mprj_io_analog_pol[3]), |
| .ANALOG_SEL(mprj_io_analog_sel[3]), |
| .DM(mprj_io_dm[11:9]), |
| .ENABLE_H(mprj_io_enh[3]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[3] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[3]), |
| .HLD_OVR(mprj_io_holdover[3]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[3]), |
| .IN(\mprj_pads.io_in[3] ), |
| .INP_DIS(mprj_io_inp_dis[3]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[3]), |
| .OUT(mprj_io_out[3]), |
| .PAD(mprj_io[3]), |
| .PAD_A_ESD_0_H(\mprj_pads.no_connect[3] ), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[3]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[3] ), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[3]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area1_io_pad[4] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[4]), |
| .ANALOG_POL(mprj_io_analog_pol[4]), |
| .ANALOG_SEL(mprj_io_analog_sel[4]), |
| .DM(mprj_io_dm[14:12]), |
| .ENABLE_H(mprj_io_enh[4]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[4] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[4]), |
| .HLD_OVR(mprj_io_holdover[4]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[4]), |
| .IN(\mprj_pads.io_in[4] ), |
| .INP_DIS(mprj_io_inp_dis[4]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[4]), |
| .OUT(mprj_io_out[4]), |
| .PAD(mprj_io[4]), |
| .PAD_A_ESD_0_H(\mprj_pads.no_connect[4] ), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[4]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[4] ), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[4]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area1_io_pad[5] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[5]), |
| .ANALOG_POL(mprj_io_analog_pol[5]), |
| .ANALOG_SEL(mprj_io_analog_sel[5]), |
| .DM(mprj_io_dm[17:15]), |
| .ENABLE_H(mprj_io_enh[5]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[5] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[5]), |
| .HLD_OVR(mprj_io_holdover[5]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[5]), |
| .IN(\mprj_pads.io_in[5] ), |
| .INP_DIS(mprj_io_inp_dis[5]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[5]), |
| .OUT(mprj_io_out[5]), |
| .PAD(mprj_io[5]), |
| .PAD_A_ESD_0_H(\mprj_pads.no_connect[5] ), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[5]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[5] ), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[5]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area1_io_pad[6] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[6]), |
| .ANALOG_POL(mprj_io_analog_pol[6]), |
| .ANALOG_SEL(mprj_io_analog_sel[6]), |
| .DM(mprj_io_dm[20:18]), |
| .ENABLE_H(mprj_io_enh[6]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[6] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[6]), |
| .HLD_OVR(mprj_io_holdover[6]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[6]), |
| .IN(\mprj_pads.io_in[6] ), |
| .INP_DIS(mprj_io_inp_dis[6]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[6]), |
| .OUT(mprj_io_out[6]), |
| .PAD(mprj_io[6]), |
| .PAD_A_ESD_0_H(\mprj_pads.no_connect[6] ), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[6]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[6] ), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[6]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area1_io_pad[7] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[7]), |
| .ANALOG_POL(mprj_io_analog_pol[7]), |
| .ANALOG_SEL(mprj_io_analog_sel[7]), |
| .DM(mprj_io_dm[23:21]), |
| .ENABLE_H(mprj_io_enh[7]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[7] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[7]), |
| .HLD_OVR(mprj_io_holdover[7]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[7]), |
| .IN(\mprj_pads.io_in[7] ), |
| .INP_DIS(mprj_io_inp_dis[7]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[7]), |
| .OUT(mprj_io_out[7]), |
| .PAD(mprj_io[7]), |
| .PAD_A_ESD_0_H(mprj_analog_io[0]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[7]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[7] ), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[7]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area1_io_pad[8] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[8]), |
| .ANALOG_POL(mprj_io_analog_pol[8]), |
| .ANALOG_SEL(mprj_io_analog_sel[8]), |
| .DM(mprj_io_dm[26:24]), |
| .ENABLE_H(mprj_io_enh[8]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[8] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[8]), |
| .HLD_OVR(mprj_io_holdover[8]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[8]), |
| .IN(\mprj_pads.io_in[8] ), |
| .INP_DIS(mprj_io_inp_dis[8]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[8]), |
| .OUT(mprj_io_out[8]), |
| .PAD(mprj_io[8]), |
| .PAD_A_ESD_0_H(mprj_analog_io[1]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[8]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[8] ), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[8]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area1_io_pad[9] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[9]), |
| .ANALOG_POL(mprj_io_analog_pol[9]), |
| .ANALOG_SEL(mprj_io_analog_sel[9]), |
| .DM(mprj_io_dm[29:27]), |
| .ENABLE_H(mprj_io_enh[9]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[9] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[9]), |
| .HLD_OVR(mprj_io_holdover[9]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[9]), |
| .IN(\mprj_pads.io_in[9] ), |
| .INP_DIS(mprj_io_inp_dis[9]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[9]), |
| .OUT(mprj_io_out[9]), |
| .PAD(mprj_io[9]), |
| .PAD_A_ESD_0_H(mprj_analog_io[2]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[9]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[9] ), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[9]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[0] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[18]), |
| .ANALOG_POL(mprj_io_analog_pol[18]), |
| .ANALOG_SEL(mprj_io_analog_sel[18]), |
| .DM(mprj_io_dm[56:54]), |
| .ENABLE_H(mprj_io_enh[18]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[18] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[18]), |
| .HLD_OVR(mprj_io_holdover[18]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[18]), |
| .IN(\mprj_pads.io_in[18] ), |
| .INP_DIS(mprj_io_inp_dis[18]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[18]), |
| .OUT(mprj_io_out[18]), |
| .PAD(mprj_io[18]), |
| .PAD_A_ESD_0_H(mprj_analog_io[11]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[18]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[18] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[18]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[10] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[28]), |
| .ANALOG_POL(mprj_io_analog_pol[28]), |
| .ANALOG_SEL(mprj_io_analog_sel[28]), |
| .DM(mprj_io_dm[86:84]), |
| .ENABLE_H(mprj_io_enh[28]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[28] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[28]), |
| .HLD_OVR(mprj_io_holdover[28]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[28]), |
| .IN(\mprj_pads.io_in[28] ), |
| .INP_DIS(mprj_io_inp_dis[28]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[28]), |
| .OUT(mprj_io_out[28]), |
| .PAD(mprj_io[28]), |
| .PAD_A_ESD_0_H(mprj_analog_io[21]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[28]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[28] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[28]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[11] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[29]), |
| .ANALOG_POL(mprj_io_analog_pol[29]), |
| .ANALOG_SEL(mprj_io_analog_sel[29]), |
| .DM(mprj_io_dm[89:87]), |
| .ENABLE_H(mprj_io_enh[29]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[29] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[29]), |
| .HLD_OVR(mprj_io_holdover[29]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[29]), |
| .IN(\mprj_pads.io_in[29] ), |
| .INP_DIS(mprj_io_inp_dis[29]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[29]), |
| .OUT(mprj_io_out[29]), |
| .PAD(mprj_io[29]), |
| .PAD_A_ESD_0_H(mprj_analog_io[22]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[29]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[29] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[29]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[12] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[30]), |
| .ANALOG_POL(mprj_io_analog_pol[30]), |
| .ANALOG_SEL(mprj_io_analog_sel[30]), |
| .DM(mprj_io_dm[92:90]), |
| .ENABLE_H(mprj_io_enh[30]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[30] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[30]), |
| .HLD_OVR(mprj_io_holdover[30]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[30]), |
| .IN(\mprj_pads.io_in[30] ), |
| .INP_DIS(mprj_io_inp_dis[30]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[30]), |
| .OUT(mprj_io_out[30]), |
| .PAD(mprj_io[30]), |
| .PAD_A_ESD_0_H(mprj_analog_io[23]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[30]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[30] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[30]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[13] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[31]), |
| .ANALOG_POL(mprj_io_analog_pol[31]), |
| .ANALOG_SEL(mprj_io_analog_sel[31]), |
| .DM(mprj_io_dm[95:93]), |
| .ENABLE_H(mprj_io_enh[31]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[31] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[31]), |
| .HLD_OVR(mprj_io_holdover[31]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[31]), |
| .IN(\mprj_pads.io_in[31] ), |
| .INP_DIS(mprj_io_inp_dis[31]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[31]), |
| .OUT(mprj_io_out[31]), |
| .PAD(mprj_io[31]), |
| .PAD_A_ESD_0_H(mprj_analog_io[24]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[31]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[31] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[31]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[14] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[32]), |
| .ANALOG_POL(mprj_io_analog_pol[32]), |
| .ANALOG_SEL(mprj_io_analog_sel[32]), |
| .DM(mprj_io_dm[98:96]), |
| .ENABLE_H(mprj_io_enh[32]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[32] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[32]), |
| .HLD_OVR(mprj_io_holdover[32]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[32]), |
| .IN(\mprj_pads.io_in[32] ), |
| .INP_DIS(mprj_io_inp_dis[32]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[32]), |
| .OUT(mprj_io_out[32]), |
| .PAD(mprj_io[32]), |
| .PAD_A_ESD_0_H(mprj_analog_io[25]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[32]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[32] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[32]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[15] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[33]), |
| .ANALOG_POL(mprj_io_analog_pol[33]), |
| .ANALOG_SEL(mprj_io_analog_sel[33]), |
| .DM(mprj_io_dm[101:99]), |
| .ENABLE_H(mprj_io_enh[33]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[33] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[33]), |
| .HLD_OVR(mprj_io_holdover[33]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[33]), |
| .IN(\mprj_pads.io_in[33] ), |
| .INP_DIS(mprj_io_inp_dis[33]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[33]), |
| .OUT(mprj_io_out[33]), |
| .PAD(mprj_io[33]), |
| .PAD_A_ESD_0_H(mprj_analog_io[26]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[33]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[33] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[33]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[16] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[34]), |
| .ANALOG_POL(mprj_io_analog_pol[34]), |
| .ANALOG_SEL(mprj_io_analog_sel[34]), |
| .DM(mprj_io_dm[104:102]), |
| .ENABLE_H(mprj_io_enh[34]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[34] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[34]), |
| .HLD_OVR(mprj_io_holdover[34]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[34]), |
| .IN(\mprj_pads.io_in[34] ), |
| .INP_DIS(mprj_io_inp_dis[34]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[34]), |
| .OUT(mprj_io_out[34]), |
| .PAD(mprj_io[34]), |
| .PAD_A_ESD_0_H(mprj_analog_io[27]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[34]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[34] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[34]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[17] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[35]), |
| .ANALOG_POL(mprj_io_analog_pol[35]), |
| .ANALOG_SEL(mprj_io_analog_sel[35]), |
| .DM(mprj_io_dm[107:105]), |
| .ENABLE_H(mprj_io_enh[35]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[35] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[35]), |
| .HLD_OVR(mprj_io_holdover[35]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[35]), |
| .IN(\mprj_pads.io_in[35] ), |
| .INP_DIS(mprj_io_inp_dis[35]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[35]), |
| .OUT(mprj_io_out[35]), |
| .PAD(mprj_io[35]), |
| .PAD_A_ESD_0_H(mprj_analog_io[28]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[35]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[35] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[35]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[18] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[36]), |
| .ANALOG_POL(mprj_io_analog_pol[36]), |
| .ANALOG_SEL(mprj_io_analog_sel[36]), |
| .DM(mprj_io_dm[110:108]), |
| .ENABLE_H(mprj_io_enh[36]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[36] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[36]), |
| .HLD_OVR(mprj_io_holdover[36]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[36]), |
| .IN(\mprj_pads.io_in[36] ), |
| .INP_DIS(mprj_io_inp_dis[36]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[36]), |
| .OUT(mprj_io_out[36]), |
| .PAD(mprj_io[36]), |
| .PAD_A_ESD_0_H(mprj_analog_io[29]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[36]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[36] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[36]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[19] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[37]), |
| .ANALOG_POL(mprj_io_analog_pol[37]), |
| .ANALOG_SEL(mprj_io_analog_sel[37]), |
| .DM(mprj_io_dm[113:111]), |
| .ENABLE_H(mprj_io_enh[37]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[37] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[37]), |
| .HLD_OVR(mprj_io_holdover[37]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[37]), |
| .IN(\mprj_pads.io_in[37] ), |
| .INP_DIS(mprj_io_inp_dis[37]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[37]), |
| .OUT(mprj_io_out[37]), |
| .PAD(mprj_io[37]), |
| .PAD_A_ESD_0_H(mprj_analog_io[30]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[37]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[37] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[37]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[1] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[19]), |
| .ANALOG_POL(mprj_io_analog_pol[19]), |
| .ANALOG_SEL(mprj_io_analog_sel[19]), |
| .DM(mprj_io_dm[59:57]), |
| .ENABLE_H(mprj_io_enh[19]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[19] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[19]), |
| .HLD_OVR(mprj_io_holdover[19]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[19]), |
| .IN(\mprj_pads.io_in[19] ), |
| .INP_DIS(mprj_io_inp_dis[19]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[19]), |
| .OUT(mprj_io_out[19]), |
| .PAD(mprj_io[19]), |
| .PAD_A_ESD_0_H(mprj_analog_io[12]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[19]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[19] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[19]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[2] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[20]), |
| .ANALOG_POL(mprj_io_analog_pol[20]), |
| .ANALOG_SEL(mprj_io_analog_sel[20]), |
| .DM(mprj_io_dm[62:60]), |
| .ENABLE_H(mprj_io_enh[20]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[20] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[20]), |
| .HLD_OVR(mprj_io_holdover[20]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[20]), |
| .IN(\mprj_pads.io_in[20] ), |
| .INP_DIS(mprj_io_inp_dis[20]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[20]), |
| .OUT(mprj_io_out[20]), |
| .PAD(mprj_io[20]), |
| .PAD_A_ESD_0_H(mprj_analog_io[13]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[20]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[20] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[20]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[3] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[21]), |
| .ANALOG_POL(mprj_io_analog_pol[21]), |
| .ANALOG_SEL(mprj_io_analog_sel[21]), |
| .DM(mprj_io_dm[65:63]), |
| .ENABLE_H(mprj_io_enh[21]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[21] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[21]), |
| .HLD_OVR(mprj_io_holdover[21]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[21]), |
| .IN(\mprj_pads.io_in[21] ), |
| .INP_DIS(mprj_io_inp_dis[21]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[21]), |
| .OUT(mprj_io_out[21]), |
| .PAD(mprj_io[21]), |
| .PAD_A_ESD_0_H(mprj_analog_io[14]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[21]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[21] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[21]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[4] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[22]), |
| .ANALOG_POL(mprj_io_analog_pol[22]), |
| .ANALOG_SEL(mprj_io_analog_sel[22]), |
| .DM(mprj_io_dm[68:66]), |
| .ENABLE_H(mprj_io_enh[22]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[22] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[22]), |
| .HLD_OVR(mprj_io_holdover[22]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[22]), |
| .IN(\mprj_pads.io_in[22] ), |
| .INP_DIS(mprj_io_inp_dis[22]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[22]), |
| .OUT(mprj_io_out[22]), |
| .PAD(mprj_io[22]), |
| .PAD_A_ESD_0_H(mprj_analog_io[15]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[22]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[22] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[22]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[5] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[23]), |
| .ANALOG_POL(mprj_io_analog_pol[23]), |
| .ANALOG_SEL(mprj_io_analog_sel[23]), |
| .DM(mprj_io_dm[71:69]), |
| .ENABLE_H(mprj_io_enh[23]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[23] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[23]), |
| .HLD_OVR(mprj_io_holdover[23]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[23]), |
| .IN(\mprj_pads.io_in[23] ), |
| .INP_DIS(mprj_io_inp_dis[23]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[23]), |
| .OUT(mprj_io_out[23]), |
| .PAD(mprj_io[23]), |
| .PAD_A_ESD_0_H(mprj_analog_io[16]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[23]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[23] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[23]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[6] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[24]), |
| .ANALOG_POL(mprj_io_analog_pol[24]), |
| .ANALOG_SEL(mprj_io_analog_sel[24]), |
| .DM(mprj_io_dm[74:72]), |
| .ENABLE_H(mprj_io_enh[24]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[24] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[24]), |
| .HLD_OVR(mprj_io_holdover[24]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[24]), |
| .IN(\mprj_pads.io_in[24] ), |
| .INP_DIS(mprj_io_inp_dis[24]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[24]), |
| .OUT(mprj_io_out[24]), |
| .PAD(mprj_io[24]), |
| .PAD_A_ESD_0_H(mprj_analog_io[17]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[24]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[24] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[24]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[7] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[25]), |
| .ANALOG_POL(mprj_io_analog_pol[25]), |
| .ANALOG_SEL(mprj_io_analog_sel[25]), |
| .DM(mprj_io_dm[77:75]), |
| .ENABLE_H(mprj_io_enh[25]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[25] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[25]), |
| .HLD_OVR(mprj_io_holdover[25]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[25]), |
| .IN(\mprj_pads.io_in[25] ), |
| .INP_DIS(mprj_io_inp_dis[25]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[25]), |
| .OUT(mprj_io_out[25]), |
| .PAD(mprj_io[25]), |
| .PAD_A_ESD_0_H(mprj_analog_io[18]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[25]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[25] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[25]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[8] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[26]), |
| .ANALOG_POL(mprj_io_analog_pol[26]), |
| .ANALOG_SEL(mprj_io_analog_sel[26]), |
| .DM(mprj_io_dm[80:78]), |
| .ENABLE_H(mprj_io_enh[26]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[26] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[26]), |
| .HLD_OVR(mprj_io_holdover[26]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[26]), |
| .IN(\mprj_pads.io_in[26] ), |
| .INP_DIS(mprj_io_inp_dis[26]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[26]), |
| .OUT(mprj_io_out[26]), |
| .PAD(mprj_io[26]), |
| .PAD_A_ESD_0_H(mprj_analog_io[19]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[26]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[26] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[26]) |
| ); |
| sky130_ef_io__gpiov2_pad_wrapped \mprj_pads.area2_io_pad[9] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .ANALOG_EN(mprj_io_analog_en[27]), |
| .ANALOG_POL(mprj_io_analog_pol[27]), |
| .ANALOG_SEL(mprj_io_analog_sel[27]), |
| .DM(mprj_io_dm[83:81]), |
| .ENABLE_H(mprj_io_enh[27]), |
| .ENABLE_INP_H(\mprj_pads.loop1_io[27] ), |
| .ENABLE_VDDA_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .ENABLE_VSWITCH_H(vssio), |
| .HLD_H_N(mprj_io_hldh_n[27]), |
| .HLD_OVR(mprj_io_holdover[27]), |
| .IB_MODE_SEL(mprj_io_ib_mode_sel[27]), |
| .IN(\mprj_pads.io_in[27] ), |
| .INP_DIS(mprj_io_inp_dis[27]), |
| .IN_H(), |
| .OE_N(mprj_io_oeb[27]), |
| .OUT(mprj_io_out[27]), |
| .PAD(mprj_io[27]), |
| .PAD_A_ESD_0_H(mprj_analog_io[20]), |
| .PAD_A_ESD_1_H(), |
| .PAD_A_NOESD_H(), |
| .SLOW(mprj_io_slow_sel[27]), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(\mprj_pads.loop1_io[27] ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .VTRIP_SEL(mprj_io_vtrip_sel[27]) |
| ); |
| sky130_fd_io__top_xres4v2 resetb_pad ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .DISABLE_PULLUP_H(vssio), |
| .ENABLE_H(porb_h), |
| .ENABLE_VDDIO(vccd), |
| .EN_VDDIO_SIG_H(vssio), |
| .FILT_IN_H(vssio), |
| .INP_SEL_H(vssio), |
| .PAD(resetb), |
| .PAD_A_ESD_H(xresloop), |
| .PULLUP_H(vssio), |
| .TIE_HI_ESD(), |
| .TIE_LO_ESD(), |
| .TIE_WEAK_HI_H(xresloop), |
| .VCCD(vccd), |
| .VCCHIB(vccd), |
| .VDDA(vdda), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa), |
| .VSSD(vssd), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio), |
| .XRES_H_N(resetb_core_h) |
| ); |
| sky130_ef_io__corner_pad user1_corner ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__vccd_lvc_pad user1_vccd_lvclamp_pad ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .BDY2_B2B(vssio), |
| .DRN_LVC1(vccd1), |
| .DRN_LVC2(vccd1), |
| .SRC_BDY_LVC1(vssd1), |
| .SRC_BDY_LVC2(vssd), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__vdda_hvc_pad \user1_vdda_hvclamp_pad[0] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .DRN_HVC(vdda1), |
| .SRC_BDY_HVC(vssa1), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__vdda_hvc_pad \user1_vdda_hvclamp_pad[1] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .DRN_HVC(vdda1), |
| .SRC_BDY_HVC(vssa1), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__vssa_hvc_pad \user1_vssa_hvclamp_pad[0] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .DRN_HVC(vdda1), |
| .SRC_BDY_HVC(vssa1), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__vssa_hvc_pad \user1_vssa_hvclamp_pad[1] ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .DRN_HVC(vdda1), |
| .SRC_BDY_HVC(vssa1), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__vssd_lvc_pad user1_vssd_lvclmap_pad ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .BDY2_B2B(vssio), |
| .DRN_LVC1(vccd1), |
| .DRN_LVC2(vccd1), |
| .SRC_BDY_LVC1(vssd1), |
| .SRC_BDY_LVC2(vssd), |
| .VCCD(vccd1), |
| .VCCHIB(vccd), |
| .VDDA(vdda1), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa1), |
| .VSSD(vssd1), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__corner_pad user2_corner ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__vccd_lvc_pad user2_vccd_lvclamp_pad ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .BDY2_B2B(vssio), |
| .DRN_LVC1(vccd2), |
| .DRN_LVC2(vccd2), |
| .SRC_BDY_LVC1(vssd2), |
| .SRC_BDY_LVC2(vssd), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__vdda_hvc_pad user2_vdda_hvclamp_pad ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .DRN_HVC(vdda2), |
| .SRC_BDY_HVC(vssa2), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__vssa_hvc_pad user2_vssa_hvclamp_pad ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .DRN_HVC(vdda2), |
| .SRC_BDY_HVC(vssa2), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| sky130_ef_io__vssd_lvc_pad user2_vssd_lvclmap_pad ( |
| .AMUXBUS_A(\mprj_pads.analog_a ), |
| .AMUXBUS_B(\mprj_pads.analog_b ), |
| .BDY2_B2B(vssio), |
| .DRN_LVC1(vccd2), |
| .DRN_LVC2(vccd2), |
| .SRC_BDY_LVC1(vssd2), |
| .SRC_BDY_LVC2(vssd), |
| .VCCD(vccd2), |
| .VCCHIB(vccd), |
| .VDDA(vdda2), |
| .VDDIO(vddio), |
| .VDDIO_Q(\mprj_pads.vddio_q ), |
| .VSSA(vssa2), |
| .VSSD(vssd2), |
| .VSSIO(vssio), |
| .VSSIO_Q(\mprj_pads.vssio_q ), |
| .VSWITCH(vddio) |
| ); |
| assign \mprj_pads.dm[92] = mprj_io_dm[92]; |
| assign \mprj_pads.dm[91] = mprj_io_dm[91]; |
| assign \mprj_pads.dm[90] = mprj_io_dm[90]; |
| assign \mprj_pads.dm[89] = mprj_io_dm[89]; |
| assign \mprj_pads.dm[88] = mprj_io_dm[88]; |
| assign \mprj_pads.dm[87] = mprj_io_dm[87]; |
| assign \mprj_pads.dm[86] = mprj_io_dm[86]; |
| assign \mprj_pads.dm[85] = mprj_io_dm[85]; |
| assign \mprj_pads.dm[84] = mprj_io_dm[84]; |
| assign \mprj_pads.dm[83] = mprj_io_dm[83]; |
| assign \mprj_pads.dm[82] = mprj_io_dm[82]; |
| assign \mprj_pads.dm[81] = mprj_io_dm[81]; |
| assign \mprj_pads.dm[80] = mprj_io_dm[80]; |
| assign \mprj_pads.dm[79] = mprj_io_dm[79]; |
| assign \mprj_pads.dm[78] = mprj_io_dm[78]; |
| assign \mprj_pads.dm[77] = mprj_io_dm[77]; |
| assign \mprj_pads.dm[76] = mprj_io_dm[76]; |
| assign \mprj_pads.dm[75] = mprj_io_dm[75]; |
| assign \mprj_pads.dm[74] = mprj_io_dm[74]; |
| assign \mprj_pads.dm[73] = mprj_io_dm[73]; |
| assign \mprj_pads.dm[72] = mprj_io_dm[72]; |
| assign \mprj_pads.dm[71] = mprj_io_dm[71]; |
| assign \mprj_pads.dm[70] = mprj_io_dm[70]; |
| assign \mprj_pads.dm[69] = mprj_io_dm[69]; |
| assign \mprj_pads.dm[68] = mprj_io_dm[68]; |
| assign \mprj_pads.dm[67] = mprj_io_dm[67]; |
| assign \mprj_pads.dm[66] = mprj_io_dm[66]; |
| assign \mprj_pads.dm[65] = mprj_io_dm[65]; |
| assign \mprj_pads.dm[64] = mprj_io_dm[64]; |
| assign \mprj_pads.dm[63] = mprj_io_dm[63]; |
| assign \mprj_pads.dm[62] = mprj_io_dm[62]; |
| assign \mprj_pads.dm[61] = mprj_io_dm[61]; |
| assign \mprj_pads.dm[60] = mprj_io_dm[60]; |
| assign \mprj_pads.dm[59] = mprj_io_dm[59]; |
| assign \mprj_pads.dm[58] = mprj_io_dm[58]; |
| assign \mprj_pads.dm[57] = mprj_io_dm[57]; |
| assign \mprj_pads.dm[56] = mprj_io_dm[56]; |
| assign \mprj_pads.dm[55] = mprj_io_dm[55]; |
| assign \mprj_pads.dm[54] = mprj_io_dm[54]; |
| assign \mprj_pads.dm[53] = mprj_io_dm[53]; |
| assign \mprj_pads.dm[52] = mprj_io_dm[52]; |
| assign \mprj_pads.dm[51] = mprj_io_dm[51]; |
| assign \mprj_pads.dm[50] = mprj_io_dm[50]; |
| assign \mprj_pads.dm[49] = mprj_io_dm[49]; |
| assign \mprj_pads.dm[48] = mprj_io_dm[48]; |
| assign \mprj_pads.dm[47] = mprj_io_dm[47]; |
| assign \mprj_pads.dm[46] = mprj_io_dm[46]; |
| assign \mprj_pads.dm[45] = mprj_io_dm[45]; |
| assign \mprj_pads.dm[44] = mprj_io_dm[44]; |
| assign \mprj_pads.dm[43] = mprj_io_dm[43]; |
| assign \mprj_pads.dm[42] = mprj_io_dm[42]; |
| assign \mprj_pads.dm[41] = mprj_io_dm[41]; |
| assign \mprj_pads.dm[40] = mprj_io_dm[40]; |
| assign \mprj_pads.dm[39] = mprj_io_dm[39]; |
| assign \mprj_pads.dm[38] = mprj_io_dm[38]; |
| assign \mprj_pads.dm[37] = mprj_io_dm[37]; |
| assign \mprj_pads.dm[36] = mprj_io_dm[36]; |
| assign \mprj_pads.dm[35] = mprj_io_dm[35]; |
| assign \mprj_pads.dm[34] = mprj_io_dm[34]; |
| assign \mprj_pads.dm[33] = mprj_io_dm[33]; |
| assign \mprj_pads.dm[32] = mprj_io_dm[32]; |
| assign \mprj_pads.dm[31] = mprj_io_dm[31]; |
| assign \mprj_pads.dm[30] = mprj_io_dm[30]; |
| assign \mprj_pads.dm[29] = mprj_io_dm[29]; |
| assign \mprj_pads.dm[28] = mprj_io_dm[28]; |
| assign \mprj_pads.dm[27] = mprj_io_dm[27]; |
| assign \mprj_pads.dm[26] = mprj_io_dm[26]; |
| assign \mprj_pads.dm[25] = mprj_io_dm[25]; |
| assign \mprj_pads.dm[24] = mprj_io_dm[24]; |
| assign \mprj_pads.dm[23] = mprj_io_dm[23]; |
| assign \mprj_pads.dm[22] = mprj_io_dm[22]; |
| assign \mprj_pads.dm[21] = mprj_io_dm[21]; |
| assign \mprj_pads.dm[20] = mprj_io_dm[20]; |
| assign \mprj_pads.dm[19] = mprj_io_dm[19]; |
| assign \mprj_pads.dm[18] = mprj_io_dm[18]; |
| assign \mprj_pads.dm[17] = mprj_io_dm[17]; |
| assign \mprj_pads.dm[16] = mprj_io_dm[16]; |
| assign \mprj_pads.dm[15] = mprj_io_dm[15]; |
| assign \mprj_pads.dm[14] = mprj_io_dm[14]; |
| assign \mprj_pads.dm[13] = mprj_io_dm[13]; |
| assign \mprj_pads.dm[12] = mprj_io_dm[12]; |
| assign \mprj_pads.dm[11] = mprj_io_dm[11]; |
| assign \mprj_pads.dm[10] = mprj_io_dm[10]; |
| assign \mprj_pads.dm[9] = mprj_io_dm[9]; |
| assign \mprj_pads.dm[8] = mprj_io_dm[8]; |
| assign \mprj_pads.dm[7] = mprj_io_dm[7]; |
| assign \mprj_pads.dm[6] = mprj_io_dm[6]; |
| assign \mprj_pads.dm[5] = mprj_io_dm[5]; |
| assign \mprj_pads.dm[4] = mprj_io_dm[4]; |
| assign \mprj_pads.dm[3] = mprj_io_dm[3]; |
| assign \mprj_pads.dm[2] = mprj_io_dm[2]; |
| assign \mprj_pads.dm[1] = mprj_io_dm[1]; |
| assign \mprj_pads.dm[0] = mprj_io_dm[0]; |
| assign \mprj_pads.analog_pol[37] = mprj_io_analog_pol[37]; |
| assign \mprj_pads.analog_pol[36] = mprj_io_analog_pol[36]; |
| assign \mprj_pads.analog_pol[35] = mprj_io_analog_pol[35]; |
| assign \mprj_pads.analog_pol[34] = mprj_io_analog_pol[34]; |
| assign \mprj_pads.analog_pol[33] = mprj_io_analog_pol[33]; |
| assign \mprj_pads.analog_pol[32] = mprj_io_analog_pol[32]; |
| assign \mprj_pads.analog_pol[31] = mprj_io_analog_pol[31]; |
| assign \mprj_pads.analog_pol[30] = mprj_io_analog_pol[30]; |
| assign \mprj_pads.analog_pol[29] = mprj_io_analog_pol[29]; |
| assign \mprj_pads.analog_pol[28] = mprj_io_analog_pol[28]; |
| assign \mprj_pads.analog_pol[27] = mprj_io_analog_pol[27]; |
| assign \mprj_pads.analog_pol[26] = mprj_io_analog_pol[26]; |
| assign \mprj_pads.analog_pol[25] = mprj_io_analog_pol[25]; |
| assign \mprj_pads.analog_pol[24] = mprj_io_analog_pol[24]; |
| assign \mprj_pads.analog_pol[23] = mprj_io_analog_pol[23]; |
| assign \mprj_pads.analog_pol[22] = mprj_io_analog_pol[22]; |
| assign \mprj_pads.analog_pol[21] = mprj_io_analog_pol[21]; |
| assign \mprj_pads.analog_pol[20] = mprj_io_analog_pol[20]; |
| assign \mprj_pads.analog_pol[19] = mprj_io_analog_pol[19]; |
| assign \mprj_pads.analog_pol[18] = mprj_io_analog_pol[18]; |
| assign \mprj_pads.analog_pol[17] = mprj_io_analog_pol[17]; |
| assign \mprj_pads.analog_pol[16] = mprj_io_analog_pol[16]; |
| assign \mprj_pads.analog_pol[15] = mprj_io_analog_pol[15]; |
| assign \mprj_pads.analog_pol[14] = mprj_io_analog_pol[14]; |
| assign \mprj_pads.analog_pol[13] = mprj_io_analog_pol[13]; |
| assign \mprj_pads.analog_pol[12] = mprj_io_analog_pol[12]; |
| assign \mprj_pads.analog_pol[11] = mprj_io_analog_pol[11]; |
| assign \mprj_pads.analog_pol[10] = mprj_io_analog_pol[10]; |
| assign \mprj_pads.analog_pol[9] = mprj_io_analog_pol[9]; |
| assign \mprj_pads.analog_pol[8] = mprj_io_analog_pol[8]; |
| assign \mprj_pads.analog_pol[7] = mprj_io_analog_pol[7]; |
| assign \mprj_pads.analog_pol[6] = mprj_io_analog_pol[6]; |
| assign \mprj_pads.analog_pol[5] = mprj_io_analog_pol[5]; |
| assign \mprj_pads.analog_pol[4] = mprj_io_analog_pol[4]; |
| assign \mprj_pads.analog_pol[3] = mprj_io_analog_pol[3]; |
| assign \mprj_pads.analog_pol[2] = mprj_io_analog_pol[2]; |
| assign \mprj_pads.analog_pol[1] = mprj_io_analog_pol[1]; |
| assign \mprj_pads.analog_pol[0] = mprj_io_analog_pol[0]; |
| assign \flash_io1_mode[2] = flash_io1_ieb_core; |
| assign \flash_io1_mode[1] = flash_io1_ieb_core; |
| assign \flash_io1_mode[0] = flash_io1_oeb_core; |
| assign \mprj_pads.hldh_n[37] = mprj_io_hldh_n[37]; |
| assign \mprj_pads.hldh_n[36] = mprj_io_hldh_n[36]; |
| assign \mprj_pads.hldh_n[35] = mprj_io_hldh_n[35]; |
| assign \mprj_pads.hldh_n[34] = mprj_io_hldh_n[34]; |
| assign \mprj_pads.hldh_n[33] = mprj_io_hldh_n[33]; |
| assign \mprj_pads.hldh_n[32] = mprj_io_hldh_n[32]; |
| assign \mprj_pads.hldh_n[31] = mprj_io_hldh_n[31]; |
| assign \mprj_pads.hldh_n[30] = mprj_io_hldh_n[30]; |
| assign \mprj_pads.hldh_n[29] = mprj_io_hldh_n[29]; |
| assign \mprj_pads.hldh_n[28] = mprj_io_hldh_n[28]; |
| assign \mprj_pads.hldh_n[27] = mprj_io_hldh_n[27]; |
| assign \mprj_pads.hldh_n[26] = mprj_io_hldh_n[26]; |
| assign \mprj_pads.hldh_n[25] = mprj_io_hldh_n[25]; |
| assign \mprj_pads.hldh_n[24] = mprj_io_hldh_n[24]; |
| assign \mprj_pads.hldh_n[23] = mprj_io_hldh_n[23]; |
| assign \mprj_pads.hldh_n[22] = mprj_io_hldh_n[22]; |
| assign \mprj_pads.hldh_n[21] = mprj_io_hldh_n[21]; |
| assign \mprj_pads.hldh_n[20] = mprj_io_hldh_n[20]; |
| assign \mprj_pads.hldh_n[19] = mprj_io_hldh_n[19]; |
| assign \mprj_pads.hldh_n[18] = mprj_io_hldh_n[18]; |
| assign \mprj_pads.hldh_n[17] = mprj_io_hldh_n[17]; |
| assign \mprj_pads.hldh_n[16] = mprj_io_hldh_n[16]; |
| assign \mprj_pads.hldh_n[15] = mprj_io_hldh_n[15]; |
| assign \mprj_pads.hldh_n[14] = mprj_io_hldh_n[14]; |
| assign \mprj_pads.hldh_n[13] = mprj_io_hldh_n[13]; |
| assign \mprj_pads.hldh_n[12] = mprj_io_hldh_n[12]; |
| assign \mprj_pads.hldh_n[11] = mprj_io_hldh_n[11]; |
| assign \mprj_pads.hldh_n[10] = mprj_io_hldh_n[10]; |
| assign \mprj_pads.hldh_n[9] = mprj_io_hldh_n[9]; |
| assign \mprj_pads.hldh_n[8] = mprj_io_hldh_n[8]; |
| assign \mprj_pads.hldh_n[7] = mprj_io_hldh_n[7]; |
| assign \mprj_pads.hldh_n[6] = mprj_io_hldh_n[6]; |
| assign \mprj_pads.hldh_n[5] = mprj_io_hldh_n[5]; |
| assign \mprj_pads.hldh_n[4] = mprj_io_hldh_n[4]; |
| assign \mprj_pads.hldh_n[3] = mprj_io_hldh_n[3]; |
| assign \mprj_pads.hldh_n[2] = mprj_io_hldh_n[2]; |
| assign \mprj_pads.hldh_n[1] = mprj_io_hldh_n[1]; |
| assign \mprj_pads.hldh_n[0] = mprj_io_hldh_n[0]; |
| assign \dm_all[2] = gpio_mode1_core; |
| assign \dm_all[1] = gpio_mode1_core; |
| assign \dm_all[0] = gpio_mode0_core; |
| assign \mprj_pads.analog_io[30] = mprj_analog_io[30]; |
| assign \mprj_pads.analog_io[29] = mprj_analog_io[29]; |
| assign \mprj_pads.analog_io[28] = mprj_analog_io[28]; |
| assign \mprj_pads.analog_io[27] = mprj_analog_io[27]; |
| assign \mprj_pads.analog_io[26] = mprj_analog_io[26]; |
| assign \mprj_pads.analog_io[25] = mprj_analog_io[25]; |
| assign \mprj_pads.analog_io[24] = mprj_analog_io[24]; |
| assign \mprj_pads.analog_io[23] = mprj_analog_io[23]; |
| assign \mprj_pads.analog_io[22] = mprj_analog_io[22]; |
| assign \mprj_pads.analog_io[21] = mprj_analog_io[21]; |
| assign \mprj_pads.analog_io[20] = mprj_analog_io[20]; |
| assign \mprj_pads.analog_io[19] = mprj_analog_io[19]; |
| assign \mprj_pads.analog_io[18] = mprj_analog_io[18]; |
| assign \mprj_pads.analog_io[17] = mprj_analog_io[17]; |
| assign \mprj_pads.analog_io[16] = mprj_analog_io[16]; |
| assign \mprj_pads.analog_io[15] = mprj_analog_io[15]; |
| assign \mprj_pads.analog_io[14] = mprj_analog_io[14]; |
| assign \mprj_pads.analog_io[13] = mprj_analog_io[13]; |
| assign \mprj_pads.analog_io[12] = mprj_analog_io[12]; |
| assign \mprj_pads.analog_io[11] = mprj_analog_io[11]; |
| assign \mprj_pads.analog_io[10] = mprj_analog_io[10]; |
| assign \mprj_pads.analog_io[9] = mprj_analog_io[9]; |
| assign \mprj_pads.analog_io[8] = mprj_analog_io[8]; |
| assign \mprj_pads.analog_io[7] = mprj_analog_io[7]; |
| assign \mprj_pads.analog_io[6] = mprj_analog_io[6]; |
| assign \mprj_pads.analog_io[5] = mprj_analog_io[5]; |
| assign \mprj_pads.analog_io[4] = mprj_analog_io[4]; |
| assign \mprj_pads.analog_io[3] = mprj_analog_io[3]; |
| assign \mprj_pads.analog_io[2] = mprj_analog_io[2]; |
| assign \mprj_pads.analog_io[1] = mprj_analog_io[1]; |
| assign \mprj_pads.analog_io[0] = mprj_analog_io[0]; |
| assign \mprj_pads.holdover[37] = mprj_io_holdover[37]; |
| assign \mprj_pads.holdover[36] = mprj_io_holdover[36]; |
| assign \mprj_pads.holdover[35] = mprj_io_holdover[35]; |
| assign \mprj_pads.holdover[34] = mprj_io_holdover[34]; |
| assign \mprj_pads.holdover[33] = mprj_io_holdover[33]; |
| assign \mprj_pads.holdover[32] = mprj_io_holdover[32]; |
| assign \mprj_pads.holdover[31] = mprj_io_holdover[31]; |
| assign \mprj_pads.holdover[30] = mprj_io_holdover[30]; |
| assign \mprj_pads.holdover[29] = mprj_io_holdover[29]; |
| assign \mprj_pads.holdover[28] = mprj_io_holdover[28]; |
| assign \mprj_pads.holdover[27] = mprj_io_holdover[27]; |
| assign \mprj_pads.holdover[26] = mprj_io_holdover[26]; |
| assign \mprj_pads.holdover[25] = mprj_io_holdover[25]; |
| assign \mprj_pads.holdover[24] = mprj_io_holdover[24]; |
| assign \mprj_pads.holdover[23] = mprj_io_holdover[23]; |
| assign \mprj_pads.holdover[22] = mprj_io_holdover[22]; |
| assign \mprj_pads.holdover[21] = mprj_io_holdover[21]; |
| assign \mprj_pads.holdover[20] = mprj_io_holdover[20]; |
| assign \mprj_pads.holdover[19] = mprj_io_holdover[19]; |
| assign \mprj_pads.holdover[18] = mprj_io_holdover[18]; |
| assign \mprj_pads.holdover[17] = mprj_io_holdover[17]; |
| assign \mprj_pads.holdover[16] = mprj_io_holdover[16]; |
| assign \mprj_pads.holdover[15] = mprj_io_holdover[15]; |
| assign \mprj_pads.holdover[14] = mprj_io_holdover[14]; |
| assign \mprj_pads.holdover[13] = mprj_io_holdover[13]; |
| assign \mprj_pads.holdover[12] = mprj_io_holdover[12]; |
| assign \mprj_pads.holdover[11] = mprj_io_holdover[11]; |
| assign \mprj_pads.holdover[10] = mprj_io_holdover[10]; |
| assign \mprj_pads.holdover[9] = mprj_io_holdover[9]; |
| assign \mprj_pads.holdover[8] = mprj_io_holdover[8]; |
| assign \mprj_pads.holdover[7] = mprj_io_holdover[7]; |
| assign \mprj_pads.holdover[6] = mprj_io_holdover[6]; |
| assign \mprj_pads.holdover[5] = mprj_io_holdover[5]; |
| assign \mprj_pads.holdover[4] = mprj_io_holdover[4]; |
| assign \mprj_pads.holdover[3] = mprj_io_holdover[3]; |
| assign \mprj_pads.holdover[2] = mprj_io_holdover[2]; |
| assign \mprj_pads.holdover[1] = mprj_io_holdover[1]; |
| assign \mprj_pads.holdover[0] = mprj_io_holdover[0]; |
| assign \mprj_pads.inp_dis[37] = mprj_io_inp_dis[37]; |
| assign \mprj_pads.inp_dis[36] = mprj_io_inp_dis[36]; |
| assign \mprj_pads.inp_dis[35] = mprj_io_inp_dis[35]; |
| assign \mprj_pads.inp_dis[34] = mprj_io_inp_dis[34]; |
| assign \mprj_pads.inp_dis[33] = mprj_io_inp_dis[33]; |
| assign \mprj_pads.inp_dis[32] = mprj_io_inp_dis[32]; |
| assign \mprj_pads.inp_dis[31] = mprj_io_inp_dis[31]; |
| assign \mprj_pads.inp_dis[30] = mprj_io_inp_dis[30]; |
| assign \mprj_pads.inp_dis[29] = mprj_io_inp_dis[29]; |
| assign \mprj_pads.inp_dis[28] = mprj_io_inp_dis[28]; |
| assign \mprj_pads.inp_dis[27] = mprj_io_inp_dis[27]; |
| assign \mprj_pads.inp_dis[26] = mprj_io_inp_dis[26]; |
| assign \mprj_pads.inp_dis[25] = mprj_io_inp_dis[25]; |
| assign \mprj_pads.inp_dis[24] = mprj_io_inp_dis[24]; |
| assign \mprj_pads.inp_dis[23] = mprj_io_inp_dis[23]; |
| assign \mprj_pads.inp_dis[22] = mprj_io_inp_dis[22]; |
| assign \mprj_pads.inp_dis[21] = mprj_io_inp_dis[21]; |
| assign \mprj_pads.inp_dis[20] = mprj_io_inp_dis[20]; |
| assign \mprj_pads.inp_dis[19] = mprj_io_inp_dis[19]; |
| assign \mprj_pads.inp_dis[18] = mprj_io_inp_dis[18]; |
| assign \mprj_pads.inp_dis[17] = mprj_io_inp_dis[17]; |
| assign \mprj_pads.inp_dis[16] = mprj_io_inp_dis[16]; |
| assign \mprj_pads.inp_dis[15] = mprj_io_inp_dis[15]; |
| assign \mprj_pads.inp_dis[14] = mprj_io_inp_dis[14]; |
| assign \mprj_pads.inp_dis[13] = mprj_io_inp_dis[13]; |
| assign \mprj_pads.inp_dis[12] = mprj_io_inp_dis[12]; |
| assign \mprj_pads.inp_dis[11] = mprj_io_inp_dis[11]; |
| assign \mprj_pads.inp_dis[10] = mprj_io_inp_dis[10]; |
| assign \mprj_pads.inp_dis[9] = mprj_io_inp_dis[9]; |
| assign \mprj_pads.inp_dis[8] = mprj_io_inp_dis[8]; |
| assign \mprj_pads.inp_dis[7] = mprj_io_inp_dis[7]; |
| assign \mprj_pads.inp_dis[6] = mprj_io_inp_dis[6]; |
| assign \mprj_pads.inp_dis[5] = mprj_io_inp_dis[5]; |
| assign \mprj_pads.inp_dis[4] = mprj_io_inp_dis[4]; |
| assign \mprj_pads.inp_dis[3] = mprj_io_inp_dis[3]; |
| assign \mprj_pads.inp_dis[2] = mprj_io_inp_dis[2]; |
| assign \mprj_pads.inp_dis[1] = mprj_io_inp_dis[1]; |
| assign \mprj_pads.inp_dis[0] = mprj_io_inp_dis[0]; |
| assign \mprj_pads.io[37] = mprj_io[37]; |
| assign \mprj_pads.io[36] = mprj_io[36]; |
| assign \mprj_pads.io[35] = mprj_io[35]; |
| assign \mprj_pads.io[34] = mprj_io[34]; |
| assign \mprj_pads.io[33] = mprj_io[33]; |
| assign \mprj_pads.io[32] = mprj_io[32]; |
| assign \mprj_pads.io[31] = mprj_io[31]; |
| assign \mprj_pads.io[30] = mprj_io[30]; |
| assign \mprj_pads.io[29] = mprj_io[29]; |
| assign \mprj_pads.io[28] = mprj_io[28]; |
| assign \mprj_pads.io[27] = mprj_io[27]; |
| assign \mprj_pads.io[26] = mprj_io[26]; |
| assign \mprj_pads.io[25] = mprj_io[25]; |
| assign \mprj_pads.io[24] = mprj_io[24]; |
| assign \mprj_pads.io[23] = mprj_io[23]; |
| assign \mprj_pads.io[22] = mprj_io[22]; |
| assign \mprj_pads.io[21] = mprj_io[21]; |
| assign \mprj_pads.io[20] = mprj_io[20]; |
| assign \mprj_pads.io[19] = mprj_io[19]; |
| assign \mprj_pads.io[18] = mprj_io[18]; |
| assign \mprj_pads.io[17] = mprj_io[17]; |
| assign \mprj_pads.io[16] = mprj_io[16]; |
| assign \mprj_pads.io[15] = mprj_io[15]; |
| assign \mprj_pads.io[14] = mprj_io[14]; |
| assign \mprj_pads.io[13] = mprj_io[13]; |
| assign \mprj_pads.io[12] = mprj_io[12]; |
| assign \mprj_pads.io[11] = mprj_io[11]; |
| assign \mprj_pads.io[10] = mprj_io[10]; |
| assign \mprj_pads.io[9] = mprj_io[9]; |
| assign \mprj_pads.io[8] = mprj_io[8]; |
| assign \mprj_pads.io[7] = mprj_io[7]; |
| assign \mprj_pads.io[6] = mprj_io[6]; |
| assign \mprj_pads.io[5] = mprj_io[5]; |
| assign \mprj_pads.io[4] = mprj_io[4]; |
| assign \mprj_pads.io[3] = mprj_io[3]; |
| assign \mprj_pads.io[2] = mprj_io[2]; |
| assign \mprj_pads.io[1] = mprj_io[1]; |
| assign \mprj_pads.io[0] = mprj_io[0]; |
| assign \mprj_pads.vtrip_sel[37] = mprj_io_vtrip_sel[37]; |
| assign \mprj_pads.vtrip_sel[36] = mprj_io_vtrip_sel[36]; |
| assign \mprj_pads.vtrip_sel[35] = mprj_io_vtrip_sel[35]; |
| assign \mprj_pads.vtrip_sel[34] = mprj_io_vtrip_sel[34]; |
| assign \mprj_pads.vtrip_sel[33] = mprj_io_vtrip_sel[33]; |
| assign \mprj_pads.vtrip_sel[32] = mprj_io_vtrip_sel[32]; |
| assign \mprj_pads.vtrip_sel[31] = mprj_io_vtrip_sel[31]; |
| assign \mprj_pads.vtrip_sel[30] = mprj_io_vtrip_sel[30]; |
| assign \mprj_pads.vtrip_sel[29] = mprj_io_vtrip_sel[29]; |
| assign \mprj_pads.vtrip_sel[28] = mprj_io_vtrip_sel[28]; |
| assign \mprj_pads.vtrip_sel[27] = mprj_io_vtrip_sel[27]; |
| assign \mprj_pads.vtrip_sel[26] = mprj_io_vtrip_sel[26]; |
| assign \mprj_pads.vtrip_sel[25] = mprj_io_vtrip_sel[25]; |
| assign \mprj_pads.vtrip_sel[24] = mprj_io_vtrip_sel[24]; |
| assign \mprj_pads.vtrip_sel[23] = mprj_io_vtrip_sel[23]; |
| assign \mprj_pads.vtrip_sel[22] = mprj_io_vtrip_sel[22]; |
| assign \mprj_pads.vtrip_sel[21] = mprj_io_vtrip_sel[21]; |
| assign \mprj_pads.vtrip_sel[20] = mprj_io_vtrip_sel[20]; |
| assign \mprj_pads.vtrip_sel[19] = mprj_io_vtrip_sel[19]; |
| assign \mprj_pads.vtrip_sel[18] = mprj_io_vtrip_sel[18]; |
| assign \mprj_pads.vtrip_sel[17] = mprj_io_vtrip_sel[17]; |
| assign \mprj_pads.vtrip_sel[16] = mprj_io_vtrip_sel[16]; |
| assign \mprj_pads.vtrip_sel[15] = mprj_io_vtrip_sel[15]; |
| assign \mprj_pads.vtrip_sel[14] = mprj_io_vtrip_sel[14]; |
| assign \mprj_pads.vtrip_sel[13] = mprj_io_vtrip_sel[13]; |
| assign \mprj_pads.vtrip_sel[12] = mprj_io_vtrip_sel[12]; |
| assign \mprj_pads.vtrip_sel[11] = mprj_io_vtrip_sel[11]; |
| assign \mprj_pads.vtrip_sel[10] = mprj_io_vtrip_sel[10]; |
| assign \mprj_pads.vtrip_sel[9] = mprj_io_vtrip_sel[9]; |
| assign \mprj_pads.vtrip_sel[8] = mprj_io_vtrip_sel[8]; |
| assign \mprj_pads.vtrip_sel[7] = mprj_io_vtrip_sel[7]; |
| assign \mprj_pads.vtrip_sel[6] = mprj_io_vtrip_sel[6]; |
| assign \mprj_pads.vtrip_sel[5] = mprj_io_vtrip_sel[5]; |
| assign \mprj_pads.vtrip_sel[4] = mprj_io_vtrip_sel[4]; |
| assign \mprj_pads.vtrip_sel[3] = mprj_io_vtrip_sel[3]; |
| assign \mprj_pads.vtrip_sel[2] = mprj_io_vtrip_sel[2]; |
| assign \mprj_pads.vtrip_sel[1] = mprj_io_vtrip_sel[1]; |
| assign \mprj_pads.vtrip_sel[0] = mprj_io_vtrip_sel[0]; |
| assign \mprj_pads.ib_mode_sel[37] = mprj_io_ib_mode_sel[37]; |
| assign \mprj_pads.ib_mode_sel[36] = mprj_io_ib_mode_sel[36]; |
| assign \mprj_pads.ib_mode_sel[35] = mprj_io_ib_mode_sel[35]; |
| assign \mprj_pads.ib_mode_sel[34] = mprj_io_ib_mode_sel[34]; |
| assign \mprj_pads.ib_mode_sel[33] = mprj_io_ib_mode_sel[33]; |
| assign \mprj_pads.ib_mode_sel[32] = mprj_io_ib_mode_sel[32]; |
| assign \mprj_pads.ib_mode_sel[31] = mprj_io_ib_mode_sel[31]; |
| assign \mprj_pads.ib_mode_sel[30] = mprj_io_ib_mode_sel[30]; |
| assign \mprj_pads.ib_mode_sel[29] = mprj_io_ib_mode_sel[29]; |
| assign \mprj_pads.ib_mode_sel[28] = mprj_io_ib_mode_sel[28]; |
| assign \mprj_pads.ib_mode_sel[27] = mprj_io_ib_mode_sel[27]; |
| assign \mprj_pads.ib_mode_sel[26] = mprj_io_ib_mode_sel[26]; |
| assign \mprj_pads.ib_mode_sel[25] = mprj_io_ib_mode_sel[25]; |
| assign \mprj_pads.ib_mode_sel[24] = mprj_io_ib_mode_sel[24]; |
| assign \mprj_pads.ib_mode_sel[23] = mprj_io_ib_mode_sel[23]; |
| assign \mprj_pads.ib_mode_sel[22] = mprj_io_ib_mode_sel[22]; |
| assign \mprj_pads.ib_mode_sel[21] = mprj_io_ib_mode_sel[21]; |
| assign \mprj_pads.ib_mode_sel[20] = mprj_io_ib_mode_sel[20]; |
| assign \mprj_pads.ib_mode_sel[19] = mprj_io_ib_mode_sel[19]; |
| assign \mprj_pads.ib_mode_sel[18] = mprj_io_ib_mode_sel[18]; |
| assign \mprj_pads.ib_mode_sel[17] = mprj_io_ib_mode_sel[17]; |
| assign \mprj_pads.ib_mode_sel[16] = mprj_io_ib_mode_sel[16]; |
| assign \mprj_pads.ib_mode_sel[15] = mprj_io_ib_mode_sel[15]; |
| assign \mprj_pads.ib_mode_sel[14] = mprj_io_ib_mode_sel[14]; |
| assign \mprj_pads.ib_mode_sel[13] = mprj_io_ib_mode_sel[13]; |
| assign \mprj_pads.ib_mode_sel[12] = mprj_io_ib_mode_sel[12]; |
| assign \mprj_pads.ib_mode_sel[11] = mprj_io_ib_mode_sel[11]; |
| assign \mprj_pads.ib_mode_sel[10] = mprj_io_ib_mode_sel[10]; |
| assign \mprj_pads.ib_mode_sel[9] = mprj_io_ib_mode_sel[9]; |
| assign \mprj_pads.ib_mode_sel[8] = mprj_io_ib_mode_sel[8]; |
| assign \mprj_pads.ib_mode_sel[7] = mprj_io_ib_mode_sel[7]; |
| assign \mprj_pads.ib_mode_sel[6] = mprj_io_ib_mode_sel[6]; |
| assign \mprj_pads.ib_mode_sel[5] = mprj_io_ib_mode_sel[5]; |
| assign \mprj_pads.ib_mode_sel[4] = mprj_io_ib_mode_sel[4]; |
| assign \mprj_pads.ib_mode_sel[3] = mprj_io_ib_mode_sel[3]; |
| assign \mprj_pads.ib_mode_sel[2] = mprj_io_ib_mode_sel[2]; |
| assign \mprj_pads.ib_mode_sel[1] = mprj_io_ib_mode_sel[1]; |
| assign \mprj_pads.ib_mode_sel[0] = mprj_io_ib_mode_sel[0]; |
| assign \flash_io0_mode[2] = flash_io0_ieb_core; |
| assign \flash_io0_mode[1] = flash_io0_ieb_core; |
| assign \flash_io0_mode[0] = flash_io0_oeb_core; |
| assign \mprj_pads.enh[37] = mprj_io_enh[37]; |
| assign \mprj_pads.enh[36] = mprj_io_enh[36]; |
| assign \mprj_pads.enh[35] = mprj_io_enh[35]; |
| assign \mprj_pads.enh[34] = mprj_io_enh[34]; |
| assign \mprj_pads.enh[33] = mprj_io_enh[33]; |
| assign \mprj_pads.enh[32] = mprj_io_enh[32]; |
| assign \mprj_pads.enh[31] = mprj_io_enh[31]; |
| assign \mprj_pads.enh[30] = mprj_io_enh[30]; |
| assign \mprj_pads.enh[29] = mprj_io_enh[29]; |
| assign \mprj_pads.enh[28] = mprj_io_enh[28]; |
| assign \mprj_pads.enh[27] = mprj_io_enh[27]; |
| assign \mprj_pads.enh[26] = mprj_io_enh[26]; |
| assign \mprj_pads.enh[25] = mprj_io_enh[25]; |
| assign \mprj_pads.enh[24] = mprj_io_enh[24]; |
| assign \mprj_pads.enh[23] = mprj_io_enh[23]; |
| assign \mprj_pads.enh[22] = mprj_io_enh[22]; |
| assign \mprj_pads.enh[21] = mprj_io_enh[21]; |
| assign \mprj_pads.enh[20] = mprj_io_enh[20]; |
| assign \mprj_pads.enh[19] = mprj_io_enh[19]; |
| assign \mprj_pads.enh[18] = mprj_io_enh[18]; |
| assign \mprj_pads.enh[17] = mprj_io_enh[17]; |
| assign \mprj_pads.enh[16] = mprj_io_enh[16]; |
| assign \mprj_pads.enh[15] = mprj_io_enh[15]; |
| assign \mprj_pads.enh[14] = mprj_io_enh[14]; |
| assign \mprj_pads.enh[13] = mprj_io_enh[13]; |
| assign \mprj_pads.enh[12] = mprj_io_enh[12]; |
| assign \mprj_pads.enh[11] = mprj_io_enh[11]; |
| assign \mprj_pads.enh[10] = mprj_io_enh[10]; |
| assign \mprj_pads.enh[9] = mprj_io_enh[9]; |
| assign \mprj_pads.enh[8] = mprj_io_enh[8]; |
| assign \mprj_pads.enh[7] = mprj_io_enh[7]; |
| assign \mprj_pads.enh[6] = mprj_io_enh[6]; |
| assign \mprj_pads.enh[5] = mprj_io_enh[5]; |
| assign \mprj_pads.enh[4] = mprj_io_enh[4]; |
| assign \mprj_pads.enh[3] = mprj_io_enh[3]; |
| assign \mprj_pads.enh[2] = mprj_io_enh[2]; |
| assign \mprj_pads.enh[1] = mprj_io_enh[1]; |
| assign \mprj_pads.enh[0] = mprj_io_enh[0]; |
| assign \mprj_pads.oeb[37] = mprj_io_oeb[37]; |
| assign \mprj_pads.oeb[36] = mprj_io_oeb[36]; |
| assign \mprj_pads.oeb[35] = mprj_io_oeb[35]; |
| assign \mprj_pads.oeb[34] = mprj_io_oeb[34]; |
| assign \mprj_pads.oeb[33] = mprj_io_oeb[33]; |
| assign \mprj_pads.oeb[32] = mprj_io_oeb[32]; |
| assign \mprj_pads.oeb[31] = mprj_io_oeb[31]; |
| assign \mprj_pads.oeb[30] = mprj_io_oeb[30]; |
| assign \mprj_pads.oeb[29] = mprj_io_oeb[29]; |
| assign \mprj_pads.oeb[28] = mprj_io_oeb[28]; |
| assign \mprj_pads.oeb[27] = mprj_io_oeb[27]; |
| assign \mprj_pads.oeb[26] = mprj_io_oeb[26]; |
| assign \mprj_pads.oeb[25] = mprj_io_oeb[25]; |
| assign \mprj_pads.oeb[24] = mprj_io_oeb[24]; |
| assign \mprj_pads.oeb[23] = mprj_io_oeb[23]; |
| assign \mprj_pads.oeb[22] = mprj_io_oeb[22]; |
| assign \mprj_pads.oeb[21] = mprj_io_oeb[21]; |
| assign \mprj_pads.oeb[20] = mprj_io_oeb[20]; |
| assign \mprj_pads.oeb[19] = mprj_io_oeb[19]; |
| assign \mprj_pads.oeb[18] = mprj_io_oeb[18]; |
| assign \mprj_pads.oeb[17] = mprj_io_oeb[17]; |
| assign \mprj_pads.oeb[16] = mprj_io_oeb[16]; |
| assign \mprj_pads.oeb[15] = mprj_io_oeb[15]; |
| assign \mprj_pads.oeb[14] = mprj_io_oeb[14]; |
| assign \mprj_pads.oeb[13] = mprj_io_oeb[13]; |
| assign \mprj_pads.oeb[12] = mprj_io_oeb[12]; |
| assign \mprj_pads.oeb[11] = mprj_io_oeb[11]; |
| assign \mprj_pads.oeb[10] = mprj_io_oeb[10]; |
| assign \mprj_pads.oeb[9] = mprj_io_oeb[9]; |
| assign \mprj_pads.oeb[8] = mprj_io_oeb[8]; |
| assign \mprj_pads.oeb[7] = mprj_io_oeb[7]; |
| assign \mprj_pads.oeb[6] = mprj_io_oeb[6]; |
| assign \mprj_pads.oeb[5] = mprj_io_oeb[5]; |
| assign \mprj_pads.oeb[4] = mprj_io_oeb[4]; |
| assign \mprj_pads.oeb[3] = mprj_io_oeb[3]; |
| assign \mprj_pads.oeb[2] = mprj_io_oeb[2]; |
| assign \mprj_pads.oeb[1] = mprj_io_oeb[1]; |
| assign \mprj_pads.oeb[0] = mprj_io_oeb[0]; |
| assign \mprj_pads.slow_sel[37] = mprj_io_slow_sel[37]; |
| assign \mprj_pads.slow_sel[36] = mprj_io_slow_sel[36]; |
| assign \mprj_pads.slow_sel[35] = mprj_io_slow_sel[35]; |
| assign \mprj_pads.slow_sel[34] = mprj_io_slow_sel[34]; |
| assign \mprj_pads.slow_sel[33] = mprj_io_slow_sel[33]; |
| assign \mprj_pads.slow_sel[32] = mprj_io_slow_sel[32]; |
| assign \mprj_pads.slow_sel[31] = mprj_io_slow_sel[31]; |
| assign \mprj_pads.slow_sel[30] = mprj_io_slow_sel[30]; |
| assign \mprj_pads.slow_sel[29] = mprj_io_slow_sel[29]; |
| assign \mprj_pads.slow_sel[28] = mprj_io_slow_sel[28]; |
| assign \mprj_pads.slow_sel[27] = mprj_io_slow_sel[27]; |
| assign \mprj_pads.slow_sel[26] = mprj_io_slow_sel[26]; |
| assign \mprj_pads.slow_sel[25] = mprj_io_slow_sel[25]; |
| assign \mprj_pads.slow_sel[24] = mprj_io_slow_sel[24]; |
| assign \mprj_pads.slow_sel[23] = mprj_io_slow_sel[23]; |
| assign \mprj_pads.slow_sel[22] = mprj_io_slow_sel[22]; |
| assign \mprj_pads.slow_sel[21] = mprj_io_slow_sel[21]; |
| assign \mprj_pads.slow_sel[20] = mprj_io_slow_sel[20]; |
| assign \mprj_pads.slow_sel[19] = mprj_io_slow_sel[19]; |
| assign \mprj_pads.slow_sel[18] = mprj_io_slow_sel[18]; |
| assign \mprj_pads.slow_sel[17] = mprj_io_slow_sel[17]; |
| assign \mprj_pads.slow_sel[16] = mprj_io_slow_sel[16]; |
| assign \mprj_pads.slow_sel[15] = mprj_io_slow_sel[15]; |
| assign \mprj_pads.slow_sel[14] = mprj_io_slow_sel[14]; |
| assign \mprj_pads.slow_sel[13] = mprj_io_slow_sel[13]; |
| assign \mprj_pads.slow_sel[12] = mprj_io_slow_sel[12]; |
| assign \mprj_pads.slow_sel[11] = mprj_io_slow_sel[11]; |
| assign \mprj_pads.slow_sel[10] = mprj_io_slow_sel[10]; |
| assign \mprj_pads.slow_sel[9] = mprj_io_slow_sel[9]; |
| assign \mprj_pads.slow_sel[8] = mprj_io_slow_sel[8]; |
| assign \mprj_pads.slow_sel[7] = mprj_io_slow_sel[7]; |
| assign \mprj_pads.slow_sel[6] = mprj_io_slow_sel[6]; |
| assign \mprj_pads.slow_sel[5] = mprj_io_slow_sel[5]; |
| assign \mprj_pads.slow_sel[4] = mprj_io_slow_sel[4]; |
| assign \mprj_pads.slow_sel[3] = mprj_io_slow_sel[3]; |
| assign \mprj_pads.slow_sel[2] = mprj_io_slow_sel[2]; |
| assign \mprj_pads.slow_sel[1] = mprj_io_slow_sel[1]; |
| assign \mprj_pads.slow_sel[0] = mprj_io_slow_sel[0]; |
| assign \mprj_pads.analog_en[37] = mprj_io_analog_en[37]; |
| assign \mprj_pads.analog_en[36] = mprj_io_analog_en[36]; |
| assign \mprj_pads.analog_en[35] = mprj_io_analog_en[35]; |
| assign \mprj_pads.analog_en[34] = mprj_io_analog_en[34]; |
| assign \mprj_pads.analog_en[33] = mprj_io_analog_en[33]; |
| assign \mprj_pads.analog_en[32] = mprj_io_analog_en[32]; |
| assign \mprj_pads.analog_en[31] = mprj_io_analog_en[31]; |
| assign \mprj_pads.analog_en[30] = mprj_io_analog_en[30]; |
| assign \mprj_pads.analog_en[29] = mprj_io_analog_en[29]; |
| assign \mprj_pads.analog_en[28] = mprj_io_analog_en[28]; |
| assign \mprj_pads.analog_en[27] = mprj_io_analog_en[27]; |
| assign \mprj_pads.analog_en[26] = mprj_io_analog_en[26]; |
| assign \mprj_pads.analog_en[25] = mprj_io_analog_en[25]; |
| assign \mprj_pads.analog_en[24] = mprj_io_analog_en[24]; |
| assign \mprj_pads.analog_en[23] = mprj_io_analog_en[23]; |
| assign \mprj_pads.analog_en[22] = mprj_io_analog_en[22]; |
| assign \mprj_pads.analog_en[21] = mprj_io_analog_en[21]; |
| assign \mprj_pads.analog_en[20] = mprj_io_analog_en[20]; |
| assign \mprj_pads.analog_en[19] = mprj_io_analog_en[19]; |
| assign \mprj_pads.analog_en[18] = mprj_io_analog_en[18]; |
| assign \mprj_pads.analog_en[17] = mprj_io_analog_en[17]; |
| assign \mprj_pads.analog_en[16] = mprj_io_analog_en[16]; |
| assign \mprj_pads.analog_en[15] = mprj_io_analog_en[15]; |
| assign \mprj_pads.analog_en[14] = mprj_io_analog_en[14]; |
| assign \mprj_pads.analog_en[13] = mprj_io_analog_en[13]; |
| assign \mprj_pads.analog_en[12] = mprj_io_analog_en[12]; |
| assign \mprj_pads.analog_en[11] = mprj_io_analog_en[11]; |
| assign \mprj_pads.analog_en[10] = mprj_io_analog_en[10]; |
| assign \mprj_pads.analog_en[9] = mprj_io_analog_en[9]; |
| assign \mprj_pads.analog_en[8] = mprj_io_analog_en[8]; |
| assign \mprj_pads.analog_en[7] = mprj_io_analog_en[7]; |
| assign \mprj_pads.analog_en[6] = mprj_io_analog_en[6]; |
| assign \mprj_pads.analog_en[5] = mprj_io_analog_en[5]; |
| assign \mprj_pads.analog_en[4] = mprj_io_analog_en[4]; |
| assign \mprj_pads.analog_en[3] = mprj_io_analog_en[3]; |
| assign \mprj_pads.analog_en[2] = mprj_io_analog_en[2]; |
| assign \mprj_pads.analog_en[1] = mprj_io_analog_en[1]; |
| assign \mprj_pads.analog_en[0] = mprj_io_analog_en[0]; |
| assign \mprj_pads.io_out[37] = mprj_io_out[37]; |
| assign \mprj_pads.io_out[36] = mprj_io_out[36]; |
| assign \mprj_pads.io_out[35] = mprj_io_out[35]; |
| assign \mprj_pads.io_out[34] = mprj_io_out[34]; |
| assign \mprj_pads.io_out[33] = mprj_io_out[33]; |
| assign \mprj_pads.io_out[32] = mprj_io_out[32]; |
| assign \mprj_pads.io_out[31] = mprj_io_out[31]; |
| assign \mprj_pads.io_out[30] = mprj_io_out[30]; |
| assign \mprj_pads.io_out[29] = mprj_io_out[29]; |
| assign \mprj_pads.io_out[28] = mprj_io_out[28]; |
| assign \mprj_pads.io_out[27] = mprj_io_out[27]; |
| assign \mprj_pads.io_out[26] = mprj_io_out[26]; |
| assign \mprj_pads.io_out[25] = mprj_io_out[25]; |
| assign \mprj_pads.io_out[24] = mprj_io_out[24]; |
| assign \mprj_pads.io_out[23] = mprj_io_out[23]; |
| assign \mprj_pads.io_out[22] = mprj_io_out[22]; |
| assign \mprj_pads.io_out[21] = mprj_io_out[21]; |
| assign \mprj_pads.io_out[20] = mprj_io_out[20]; |
| assign \mprj_pads.io_out[19] = mprj_io_out[19]; |
| assign \mprj_pads.io_out[18] = mprj_io_out[18]; |
| assign \mprj_pads.io_out[17] = mprj_io_out[17]; |
| assign \mprj_pads.io_out[16] = mprj_io_out[16]; |
| assign \mprj_pads.io_out[15] = mprj_io_out[15]; |
| assign \mprj_pads.io_out[14] = mprj_io_out[14]; |
| assign \mprj_pads.io_out[13] = mprj_io_out[13]; |
| assign \mprj_pads.io_out[12] = mprj_io_out[12]; |
| assign \mprj_pads.io_out[11] = mprj_io_out[11]; |
| assign \mprj_pads.io_out[10] = mprj_io_out[10]; |
| assign \mprj_pads.io_out[9] = mprj_io_out[9]; |
| assign \mprj_pads.io_out[8] = mprj_io_out[8]; |
| assign \mprj_pads.io_out[7] = mprj_io_out[7]; |
| assign \mprj_pads.io_out[6] = mprj_io_out[6]; |
| assign \mprj_pads.io_out[5] = mprj_io_out[5]; |
| assign \mprj_pads.io_out[4] = mprj_io_out[4]; |
| assign \mprj_pads.io_out[3] = mprj_io_out[3]; |
| assign \mprj_pads.io_out[2] = mprj_io_out[2]; |
| assign \mprj_pads.io_out[1] = mprj_io_out[1]; |
| assign \mprj_pads.io_out[0] = mprj_io_out[0]; |
| assign \mprj_pads.analog_sel[37] = mprj_io_analog_sel[37]; |
| assign \mprj_pads.analog_sel[36] = mprj_io_analog_sel[36]; |
| assign \mprj_pads.analog_sel[35] = mprj_io_analog_sel[35]; |
| assign \mprj_pads.analog_sel[34] = mprj_io_analog_sel[34]; |
| assign \mprj_pads.analog_sel[33] = mprj_io_analog_sel[33]; |
| assign \mprj_pads.analog_sel[32] = mprj_io_analog_sel[32]; |
| assign \mprj_pads.analog_sel[31] = mprj_io_analog_sel[31]; |
| assign \mprj_pads.analog_sel[30] = mprj_io_analog_sel[30]; |
| assign \mprj_pads.analog_sel[29] = mprj_io_analog_sel[29]; |
| assign \mprj_pads.analog_sel[28] = mprj_io_analog_sel[28]; |
| assign \mprj_pads.analog_sel[27] = mprj_io_analog_sel[27]; |
| assign \mprj_pads.analog_sel[26] = mprj_io_analog_sel[26]; |
| assign \mprj_pads.analog_sel[25] = mprj_io_analog_sel[25]; |
| assign \mprj_pads.analog_sel[24] = mprj_io_analog_sel[24]; |
| assign \mprj_pads.analog_sel[23] = mprj_io_analog_sel[23]; |
| assign \mprj_pads.analog_sel[22] = mprj_io_analog_sel[22]; |
| assign \mprj_pads.analog_sel[21] = mprj_io_analog_sel[21]; |
| assign \mprj_pads.analog_sel[20] = mprj_io_analog_sel[20]; |
| assign \mprj_pads.analog_sel[19] = mprj_io_analog_sel[19]; |
| assign \mprj_pads.analog_sel[18] = mprj_io_analog_sel[18]; |
| assign \mprj_pads.analog_sel[17] = mprj_io_analog_sel[17]; |
| assign \mprj_pads.analog_sel[16] = mprj_io_analog_sel[16]; |
| assign \mprj_pads.analog_sel[15] = mprj_io_analog_sel[15]; |
| assign \mprj_pads.analog_sel[14] = mprj_io_analog_sel[14]; |
| assign \mprj_pads.analog_sel[13] = mprj_io_analog_sel[13]; |
| assign \mprj_pads.analog_sel[12] = mprj_io_analog_sel[12]; |
| assign \mprj_pads.analog_sel[11] = mprj_io_analog_sel[11]; |
| assign \mprj_pads.analog_sel[10] = mprj_io_analog_sel[10]; |
| assign \mprj_pads.analog_sel[9] = mprj_io_analog_sel[9]; |
| assign \mprj_pads.analog_sel[8] = mprj_io_analog_sel[8]; |
| assign \mprj_pads.analog_sel[7] = mprj_io_analog_sel[7]; |
| assign \mprj_pads.analog_sel[6] = mprj_io_analog_sel[6]; |
| assign \mprj_pads.analog_sel[5] = mprj_io_analog_sel[5]; |
| assign \mprj_pads.analog_sel[4] = mprj_io_analog_sel[4]; |
| assign \mprj_pads.analog_sel[3] = mprj_io_analog_sel[3]; |
| assign \mprj_pads.analog_sel[2] = mprj_io_analog_sel[2]; |
| assign \mprj_pads.analog_sel[1] = mprj_io_analog_sel[1]; |
| assign \mprj_pads.analog_sel[0] = mprj_io_analog_sel[0]; |
| assign \mprj_pads.vddio = vddio; |
| assign \mprj_pads.vssio = vssio; |
| assign \mprj_pads.vccd = vccd; |
| assign \mprj_pads.vssd = vssd; |
| assign \mprj_pads.vdda1 = vdda1; |
| assign \mprj_pads.vdda2 = vdda2; |
| assign \mprj_pads.vssa1 = vssa1; |
| assign \mprj_pads.vssa2 = vssa2; |
| assign \mprj_pads.vccd1 = vccd1; |
| assign \mprj_pads.vccd2 = vccd2; |
| assign \mprj_pads.vssd1 = vssd1; |
| assign \mprj_pads.vssd2 = vssd2; |
| assign \mprj_pads.porb_h = porb_h; |
| assign \mprj_pads.dm[104] = mprj_io_dm[104]; |
| assign \mprj_pads.dm[94] = mprj_io_dm[94]; |
| assign \mprj_pads.dm[99] = mprj_io_dm[99]; |
| assign \mprj_pads.dm[110] = mprj_io_dm[110]; |
| assign \mprj_pads.dm[100] = mprj_io_dm[100]; |
| assign \mprj_pads.dm[105] = mprj_io_dm[105]; |
| assign \mprj_pads.dm[102] = mprj_io_dm[102]; |
| assign \mprj_pads.dm[103] = mprj_io_dm[103]; |
| assign \mprj_pads.dm[96] = mprj_io_dm[96]; |
| assign \mprj_pads.dm[107] = mprj_io_dm[107]; |
| assign \mprj_pads.dm[95] = mprj_io_dm[95]; |
| assign \mprj_pads.dm[93] = mprj_io_dm[93]; |
| assign \mprj_pads.dm[112] = mprj_io_dm[112]; |
| assign \mprj_pads.dm[113] = mprj_io_dm[113]; |
| assign \mprj_pads.dm[106] = mprj_io_dm[106]; |
| assign \mprj_pads.dm[108] = mprj_io_dm[108]; |
| assign \mprj_pads.dm[98] = mprj_io_dm[98]; |
| assign \mprj_pads.dm[97] = mprj_io_dm[97]; |
| assign \mprj_pads.dm[111] = mprj_io_dm[111]; |
| assign \mprj_pads.dm[101] = mprj_io_dm[101]; |
| assign \mprj_pads.dm[109] = mprj_io_dm[109]; |
| assign vssio_q = \mprj_pads.vssio_q ; |
| assign vddio_q = \mprj_pads.vddio_q ; |
| assign analog_b = \mprj_pads.analog_b ; |
| assign analog_a = \mprj_pads.analog_a ; |
| assign mprj_io_in = { \mprj_pads.io_in[37] , \mprj_pads.io_in[36] , \mprj_pads.io_in[35] , \mprj_pads.io_in[34] , \mprj_pads.io_in[33] , \mprj_pads.io_in[32] , \mprj_pads.io_in[31] , \mprj_pads.io_in[30] , \mprj_pads.io_in[29] , \mprj_pads.io_in[28] , \mprj_pads.io_in[27] , \mprj_pads.io_in[26] , \mprj_pads.io_in[25] , \mprj_pads.io_in[24] , \mprj_pads.io_in[23] , \mprj_pads.io_in[22] , \mprj_pads.io_in[21] , \mprj_pads.io_in[20] , \mprj_pads.io_in[19] , \mprj_pads.io_in[18] , \mprj_pads.io_in[17] , \mprj_pads.io_in[16] , \mprj_pads.io_in[15] , \mprj_pads.io_in[14] , \mprj_pads.io_in[13] , \mprj_pads.io_in[12] , \mprj_pads.io_in[11] , \mprj_pads.io_in[10] , \mprj_pads.io_in[9] , \mprj_pads.io_in[8] , \mprj_pads.io_in[7] , \mprj_pads.io_in[6] , \mprj_pads.io_in[5] , \mprj_pads.io_in[4] , \mprj_pads.io_in[3] , \mprj_pads.io_in[2] , \mprj_pads.io_in[1] , \mprj_pads.io_in[0] }; |
| endmodule |