verilog/dv/caravel/microwatt/jtag/jtag_tb.v

`default_nettype none
/*
 *  Copyright (C) 2017  Clifford Wolf <clifford@clifford.at>
 *  Copyright (C) 2018  Tim Edwards <tim@efabless.com>
 *  Copyright (C) 2020  Anton Blanchard <anton@linux.ibm.com>
 *  Copyright (C) 2021  Michael Neuling <mikey@linux.ibm.com>
 *
 *  Permission to use, copy, modify, and/or distribute this software for any
 *  purpose with or without fee is hereby granted, provided that the above
 *  copyright notice and this permission notice appear in all copies.
 *
 *  THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 *  WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 *  MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 *  ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 *  WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 *  ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 *  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 *
 */

`timescale 1 ns / 1 ps

`include "caravel_netlists.v"
`include "spiflash.v"

module jtag_expect_idcode (
	input tdo,
	input tck,
	input en
);
	reg [4:0] recv_state;
	reg [31:0] pattern;

	reg clk;

	initial begin
		recv_state <= 0;
		pattern <= 0;
	end

	always @(posedge tck) begin
	   if (en == 1'b1) begin
	      pattern <= {tdo, pattern[31:1]};
	      recv_state <= recv_state + 1;
	   end
	   case (recv_state)
	     31: begin
		recv_state <= 0;
		$display("Testing: Read %x from JTAG", pattern);
		// Expecting 7 back
		if (pattern == 32'h14d57048) begin
		   $display("PASSED");
		   $finish;
		end else begin
		   $display("FAILED: should have been 14d57048");
		   $fatal;
		end
	     end
	   endcase
	end
endmodule

module jtag_tb;
	reg clock;
	reg RSTB;
	reg CSB;
	reg power1, power2;

	wire gpio;
	wire flash_csb;
	wire flash_clk;
	wire flash_io0;
	wire flash_io1;
	wire [37:0] mprj_io;
	wire user_flash_csb;
	wire user_flash_clk;
	inout user_flash_io0;
	inout user_flash_io1;

	wire jtag_tdo;
	reg jtag_tdo_en;
        reg jtag_tms;
        reg jtag_tck;
        reg jtag_tdi;

	assign user_flash_csb = mprj_io[8];
	assign user_flash_clk = mprj_io[9];
	assign user_flash_io0 = mprj_io[10];
	assign mprj_io[11] = user_flash_io1;

        assign jtag_tdo = mprj_io[14];
        assign mprj_io[15] = jtag_tms;
        assign mprj_io[16] = jtag_tck;
        assign mprj_io[17] = jtag_tdi;

	// 50 MHz clock
	always #10 clock <= (clock === 1'b0);

	initial begin
		clock = 0;
	end

	initial begin
		$dumpfile("jtag.vcd");
		$dumpvars(0, jtag_tb);

		$display("Microwatt JTAG IDCODE test");

		repeat (150) begin
			repeat (10000) @(posedge clock);
			// Diagnostic. . . interrupts output pattern.
		end
		$finish;
	end

	initial begin
                RSTB <= 1'b0;
		CSB  <= 1'b1;		// Force CSB high
		#1000;
		RSTB <= 1'b1;		// Release reset
		#170000;
		CSB = 1'b0;		// CSB can be released
	end

	initial begin		// Power-up sequence
		power1 <= 1'b0;
		power2 <= 1'b0;
		#200;
		power1 <= 1'b1;
		#200;
		power2 <= 1'b1;
	end

        initial begin
           jtag_tms <= 1'b1;
           jtag_tck <= 1'b1;
           jtag_tdi <= 1'b1;
	   jtag_tdo_en <= 1'b0;

           #200000;

           jtag_tms <= 1'b1;
           jtag_tck <= 1'b0;
           #1000;
           jtag_tck <= 1'b1;
           #1000;

           jtag_tms <= 1'b0; //rti
           jtag_tck <= 1'b0;
           #1000;
           jtag_tck <= 1'b1;
           #1000;

           jtag_tms <= 1'b1; //drs
           jtag_tck <= 1'b0;
           #1000;
           jtag_tck <= 1'b1;
           #1000;

           jtag_tms <= 1'b0; // cdr
           jtag_tck <= 1'b0;
           #1000;
           jtag_tck <= 1'b1;
           #1000;

           jtag_tms <= 1'b0; // sdr
           jtag_tck <= 1'b0;
           #1000;
           jtag_tck <= 1'b1;
           #1000;

           jtag_tms <= 1'b0; // sdr
           jtag_tck <= 1'b0;
           #1000;
           jtag_tck <= 1'b1;
           #1000;

           jtag_tms <= 1'b0; // sdr
	   jtag_tdo_en <= 1'b1;
           jtag_tck <= 1'b0;
           #1000;
           jtag_tck <= 1'b1;
           #1000;

	   repeat (32) begin
              jtag_tck <= 1'b0;
              #1000;
              jtag_tck <= 1'b1;
              #1000;
	   end 

	end

	wire VDD3V3;
	wire VDD1V8;
	wire VSS;

	assign VDD3V3 = power1;
	assign VDD1V8 = power2;
	assign VSS = 1'b0;

	assign mprj_io[3] = (CSB == 1'b1) ? 1'b1 : 1'bz;

	caravel uut (
		.vddio	  (VDD3V3),
		.vssio	  (VSS),
		.vdda	  (VDD3V3),
		.vssa	  (VSS),
		.vccd	  (VDD1V8),
		.vssd	  (VSS),
		.vdda1    (VDD3V3),
		.vdda2    (VDD3V3),
		.vssa1	  (VSS),
		.vssa2	  (VSS),
		.vccd1	  (VDD1V8),
		.vccd2	  (VDD1V8),
		.vssd1	  (VSS),
		.vssd2	  (VSS),
		.clock	  (clock),
		.gpio     (gpio),
		.mprj_io  (mprj_io),
		.flash_csb(flash_csb),
		.flash_clk(flash_clk),
		.flash_io0(flash_io0),
		.flash_io1(flash_io1),
		.resetb	  (RSTB)
	);

	spiflash #(
		.FILENAME("mgmt_engine.hex")
	) spiflash (
		.csb(flash_csb),
		.clk(flash_clk),
		.io0(flash_io0),
		.io1(flash_io1),
		.io2(),			// not used
		.io3()			// not used
	);

	spiflash #(
		.FILENAME("microwatt.hex")
	) spiflash_microwatt (
		.csb(user_flash_csb),
		.clk(user_flash_clk),
		.io0(user_flash_io0),
		.io1(user_flash_io1),
		.io2(),			// not used
		.io3()			// not used
	);

	jtag_expect_idcode tb_jtag (
		.tdo(jtag_tdo),
		.tck(jtag_tck),
		.en(jtag_tdo_en)
	);

endmodule
`default_nettype wire