blob: bf32469cbc4c5fef70722d702041ea198b4d4cb2 [file] [log] [blame]
`default_nettype none
/*
*-------------------------------------------------------------
*
* user_project_wrapper
*
* This wrapper enumerates all of the pins available to the
* user for the user project.
*
* An example user project is provided in this wrapper. The
* example should be removed and replaced with the actual
* user project.
*
*-------------------------------------------------------------
*/
module user_project_wrapper #(
parameter BITS = 32
)(
`ifdef USE_POWER_PINS
inout vdda1, // User area 1 3.3V supply
inout vdda2, // User area 2 3.3V supply
inout vssa1, // User area 1 analog ground
inout vssa2, // User area 2 analog ground
inout vccd1, // User area 1 1.8V supply
inout vccd2, // User area 2 1.8v supply
inout vssd1, // User area 1 digital ground
inout vssd2, // User area 2 digital ground
`endif
// Wishbone Slave ports (WB MI A)
input wb_clk_i,
input wb_rst_i,
input wbs_stb_i,
input wbs_cyc_i,
input wbs_we_i,
input [3:0] wbs_sel_i,
input [31:0] wbs_dat_i,
input [31:0] wbs_adr_i,
output wbs_ack_o,
output [31:0] wbs_dat_o,
// Logic Analyzer Signals
input [127:0] la_data_in,
output [127:0] la_data_out,
input [127:0] la_oen,
// IOs
input [`MPRJ_IO_PADS-1:0] io_in,
output [`MPRJ_IO_PADS-1:0] io_out,
output [`MPRJ_IO_PADS-1:0] io_oeb,
// Analog (direct connection to GPIO pad---use with caution)
// Note that analog I/O is not available on the 7 lowest-numbered
// GPIO pads, and so the analog_io indexing is offset from the
// GPIO indexing by 7.
inout [`MPRJ_IO_PADS-8:0] analog_io,
// Independent clock (on independent integer divider)
input user_clock2
);
/*--------------------------------------*/
/* Instantiation of decred_top. */
/*--------------------------------------*/
decred_top mprj (
`ifdef USE_POWER_PINS
.vdda1(vdda1), // User area 1 3.3V power
.vdda2(vdda2), // User area 2 3.3V power
.vssa1(vssa1), // User area 1 analog ground
.vssa2(vssa2), // User area 2 analog ground
.vccd1(vccd1), // User area 1 1.8V power
.vccd2(vccd2), // User area 2 1.8V power
.vssd1(vssd1), // User area 1 digital ground
.vssd2(vssd2), // User area 2 digital ground
`endif
// inputs
.PLL_INPUT(user_clock2),
.EXT_RESET_N_fromHost(analog_io[0]),
.SCLK_fromHost(analog_io[1]),
.M1_CLK_IN(analog_io[2]),
.M1_CLK_SELECT(analog_io[3]),
.S1_CLK_IN(analog_io[4]),
.S1_CLK_SELECT(analog_io[5]),
.SCSN_fromHost(analog_io[6]),
.MOSI_fromHost(analog_io[7]),
.MISO_fromClient(analog_io[8]),
.IRQ_OUT_fromClient(analog_io[9]),
.ID_fromClient(analog_io[10]),
.SPI_CLK_RESET_N(analog_io[11]),
// outputs
.SCSN_toClient(analog_io[12]),
.SCLK_toClient(analog_io[13]),
.MOSI_toClient(analog_io[14]),
.EXT_RESET_N_toClient(analog_io[15]),
.ID_toHost(analog_io[16]),
.CLK_LED(analog_io[17]),
.MISO_toHost(analog_io[18]),
.HASH_LED(analog_io[18]),
.IRQ_OUT_toHost(analog_io[19])
);
endmodule // user_project_wrapper
`default_nettype wire