| // SPDX-FileCopyrightText: 2020 Efabless Corporation | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // http://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| // SPDX-License-Identifier: Apache-2.0 | |
| `default_nettype none | |
| /* | |
| *------------------------------------------------------------- | |
| * | |
| * user_project_wrapper | |
| * | |
| * This wrapper enumerates all of the pins available to the | |
| * user for the user project. | |
| * | |
| * An example user project is provided in this wrapper. The | |
| * example should be removed and replaced with the actual | |
| * user project. | |
| * | |
| *------------------------------------------------------------- | |
| */ | |
| `define MPRJ_IO_PADS 38 | |
| module user_project_wrapper ( | |
| `ifdef USE_POWER_PINS | |
| inout vdda1, // User area 1 3.3V supply | |
| inout vdda2, // User area 2 3.3V supply | |
| inout vssa1, // User area 1 analog ground | |
| inout vssa2, // User area 2 analog ground | |
| inout vccd1, // User area 1 1.8V supply | |
| inout vccd2, // User area 2 1.8v supply | |
| inout vssd1, // User area 1 digital ground | |
| inout vssd2, // User area 2 digital ground | |
| `endif | |
| // Wishbone Slave ports (WB MI A) | |
| input wb_clk_i, | |
| input wb_rst_i, | |
| input wbs_stb_i, | |
| input wbs_cyc_i, | |
| input wbs_we_i, | |
| input [3:0] wbs_sel_i, | |
| input [31:0] wbs_dat_i, | |
| input [31:0] wbs_adr_i, | |
| output wbs_ack_o, | |
| output [31:0] wbs_dat_o, | |
| // Logic Analyzer Signals | |
| input [127:0] la_data_in, | |
| output [127:0] la_data_out, | |
| input [127:0] la_oen, | |
| // IOs | |
| input [`MPRJ_IO_PADS-1:0] io_in, | |
| output [`MPRJ_IO_PADS-1:0] io_out, | |
| output [`MPRJ_IO_PADS-1:0] io_oeb, | |
| // Analog (direct connection to GPIO pad---use with caution) | |
| // Note that analog I/O is not available on the 7 lowest-numbered | |
| // GPIO pads, and so the analog_io indexing is offset from the | |
| // GPIO indexing by 7. | |
| inout [`MPRJ_IO_PADS-8:0] analog_io, | |
| // Independent clock (on independent integer divider) | |
| input user_clock2 | |
| ); | |
| /*--------------------------------------*/ | |
| /* User project is instantiated here */ | |
| /*--------------------------------------*/ | |
| user_proj_top user_proj_top ( | |
| `ifdef USE_POWER_PINS | |
| .VPWR(vccd1), // User area 1 1.8V power | |
| .VGND(vssd1), // User area 1 digital ground | |
| `endif | |
| // MGMT core clock and reset | |
| .clk(wb_clk_i), | |
| .rst(wb_rst_i), | |
| // Logic Analyzer | |
| .mc (la_data_in[31:0]), | |
| .mp (la_data_in[63:32]), | |
| .start (la_data_in[64]), | |
| .prod_sel(la_data_in[65]), | |
| .done (la_data_out[66]), | |
| .prod (la_data_out[127:96]), | |
| .tie ({io_oeb[`MPRJ_IO_PADS-1:5], io_oeb[3:0], io_out[`MPRJ_IO_PADS-1:5], io_out[3:0], la_data_out[63:1], wbs_ack_o, wbs_dat_o[31:0]}), | |
| // IO Pads | |
| .tck(io_in[0]), // test clock on one of the IOs ? | |
| .tms(io_in[1]), | |
| .tdi(io_in[2]), | |
| .trst(io_in[5]), | |
| .tdo(io_out[4]), | |
| .tdo_paden_o(io_oeb[4]) | |
| ); | |
| endmodule // user_project_wrapper | |
| `default_nettype wire |