| // SPDX-License-Identifier: Apache-2.0 |
| |
| `default_nettype none |
| /* |
| * PicoSoC - A simple example SoC using PicoRV32 |
| * |
| * Copyright (C) 2017 Clifford Wolf <clifford@clifford.at> |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| * |
| */ |
| |
| `timescale 1 ns / 1 ps |
| |
| // |
| // Simple SPI flash simulation model |
| // |
| // This model samples io input signals 1ns before the SPI clock edge and |
| // updates output signals 1ns after the SPI clock edge. |
| // |
| // Supported commands: |
| // AB, B9, FF, 03, BB, EB, ED |
| // |
| // Well written SPI flash data sheets: |
| // Cypress S25FL064L http://www.cypress.com/file/316661/download |
| // Cypress S25FL128L http://www.cypress.com/file/316171/download |
| // |
| |
| module spiflash #( |
| parameter FILENAME = "firmware.hex" |
| )( |
| input csb, |
| input clk, |
| inout io0, // MOSI |
| inout io1, // MISO |
| inout io2, |
| inout io3 |
| ); |
| localparam verbose = 0; |
| localparam integer latency = 8; |
| |
| reg [7:0] buffer; |
| integer bitcount = 0; |
| integer bytecount = 0; |
| integer dummycount = 0; |
| |
| reg [7:0] spi_cmd; |
| reg [7:0] xip_cmd = 0; |
| reg [23:0] spi_addr; |
| |
| reg [7:0] spi_in; |
| reg [7:0] spi_out; |
| reg spi_io_vld; |
| |
| reg powered_up = 0; |
| |
| localparam [3:0] mode_spi = 1; |
| localparam [3:0] mode_dspi_rd = 2; |
| localparam [3:0] mode_dspi_wr = 3; |
| localparam [3:0] mode_qspi_rd = 4; |
| localparam [3:0] mode_qspi_wr = 5; |
| localparam [3:0] mode_qspi_ddr_rd = 6; |
| localparam [3:0] mode_qspi_ddr_wr = 7; |
| |
| reg [3:0] mode = 0; |
| reg [3:0] next_mode = 0; |
| |
| reg io0_oe = 0; |
| reg io1_oe = 0; |
| reg io2_oe = 0; |
| reg io3_oe = 0; |
| |
| reg io0_dout = 0; |
| reg io1_dout = 0; |
| reg io2_dout = 0; |
| reg io3_dout = 0; |
| |
| assign #1 io0 = io0_oe ? io0_dout : 1'bz; |
| assign #1 io1 = io1_oe ? io1_dout : 1'bz; |
| assign #1 io2 = io2_oe ? io2_dout : 1'bz; |
| assign #1 io3 = io3_oe ? io3_dout : 1'bz; |
| |
| wire io0_delayed; |
| wire io1_delayed; |
| wire io2_delayed; |
| wire io3_delayed; |
| |
| assign #1 io0_delayed = io0; |
| assign #1 io1_delayed = io1; |
| assign #1 io2_delayed = io2; |
| assign #1 io3_delayed = io3; |
| |
| // 16 MB (128Mb) Flash |
| reg [7:0] memory [0:16*1024*1024-1]; |
| |
| initial begin |
| $display("Memory 5 bytes = 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x", |
| memory[1048576], memory[1048577], memory[1048578], |
| memory[1048579], memory[1048580]); |
| $display("Reading %s", FILENAME); |
| $readmemh(FILENAME, memory); |
| $display("%s loaded into memory", FILENAME); |
| $display("Memory 5 bytes = 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x", |
| memory[1048576], memory[1048577], memory[1048578], |
| memory[1048579], memory[1048580]); |
| end |
| |
| task spi_action; |
| begin |
| spi_in = buffer; |
| |
| if (bytecount == 1) begin |
| spi_cmd = buffer; |
| |
| if (spi_cmd == 8'h ab) |
| powered_up = 1; |
| |
| if (spi_cmd == 8'h b9) |
| powered_up = 0; |
| |
| if (spi_cmd == 8'h ff) |
| xip_cmd = 0; |
| end |
| |
| if (powered_up && spi_cmd == 'h 03) begin |
| if (bytecount == 2) |
| spi_addr[23:16] = buffer; |
| |
| if (bytecount == 3) |
| spi_addr[15:8] = buffer; |
| |
| if (bytecount == 4) |
| spi_addr[7:0] = buffer; |
| |
| if (bytecount >= 4) begin |
| buffer = memory[spi_addr]; |
| spi_addr = spi_addr + 1; |
| end |
| end |
| |
| if (powered_up && spi_cmd == 'h bb) begin |
| if (bytecount == 1) |
| mode = mode_dspi_rd; |
| |
| if (bytecount == 2) |
| spi_addr[23:16] = buffer; |
| |
| if (bytecount == 3) |
| spi_addr[15:8] = buffer; |
| |
| if (bytecount == 4) |
| spi_addr[7:0] = buffer; |
| |
| if (bytecount == 5) begin |
| xip_cmd = (buffer == 8'h a5) ? spi_cmd : 8'h 00; |
| mode = mode_dspi_wr; |
| dummycount = latency; |
| end |
| |
| if (bytecount >= 5) begin |
| buffer = memory[spi_addr]; |
| spi_addr = spi_addr + 1; |
| end |
| end |
| |
| if (powered_up && spi_cmd == 'h eb) begin |
| if (bytecount == 1) |
| mode = mode_qspi_rd; |
| |
| if (bytecount == 2) |
| spi_addr[23:16] = buffer; |
| |
| if (bytecount == 3) |
| spi_addr[15:8] = buffer; |
| |
| if (bytecount == 4) |
| spi_addr[7:0] = buffer; |
| |
| if (bytecount == 5) begin |
| xip_cmd = (buffer == 8'h a5) ? spi_cmd : 8'h 00; |
| mode = mode_qspi_wr; |
| dummycount = latency; |
| end |
| |
| if (bytecount >= 5) begin |
| buffer = memory[spi_addr]; |
| spi_addr = spi_addr + 1; |
| end |
| end |
| |
| if (powered_up && spi_cmd == 'h ed) begin |
| if (bytecount == 1) |
| next_mode = mode_qspi_ddr_rd; |
| |
| if (bytecount == 2) |
| spi_addr[23:16] = buffer; |
| |
| if (bytecount == 3) |
| spi_addr[15:8] = buffer; |
| |
| if (bytecount == 4) |
| spi_addr[7:0] = buffer; |
| |
| if (bytecount == 5) begin |
| xip_cmd = (buffer == 8'h a5) ? spi_cmd : 8'h 00; |
| mode = mode_qspi_ddr_wr; |
| dummycount = latency; |
| end |
| |
| if (bytecount >= 5) begin |
| buffer = memory[spi_addr]; |
| spi_addr = spi_addr + 1; |
| end |
| end |
| |
| spi_out = buffer; |
| spi_io_vld = 1; |
| |
| if (verbose) begin |
| if (bytecount == 1) |
| $write("<SPI-START>"); |
| $write("<SPI:%02x:%02x>", spi_in, spi_out); |
| end |
| |
| end |
| endtask |
| |
| task ddr_rd_edge; |
| begin |
| buffer = {buffer, io3_delayed, io2_delayed, io1_delayed, io0_delayed}; |
| bitcount = bitcount + 4; |
| if (bitcount == 8) begin |
| bitcount = 0; |
| bytecount = bytecount + 1; |
| spi_action; |
| end |
| end |
| endtask |
| |
| task ddr_wr_edge; |
| begin |
| io0_oe = 1; |
| io1_oe = 1; |
| io2_oe = 1; |
| io3_oe = 1; |
| |
| io0_dout = buffer[4]; |
| io1_dout = buffer[5]; |
| io2_dout = buffer[6]; |
| io3_dout = buffer[7]; |
| |
| buffer = {buffer, 4'h 0}; |
| bitcount = bitcount + 4; |
| if (bitcount == 8) begin |
| bitcount = 0; |
| bytecount = bytecount + 1; |
| spi_action; |
| end |
| end |
| endtask |
| |
| always @(csb) begin |
| if (csb) begin |
| if (verbose) begin |
| $display(""); |
| $fflush; |
| end |
| buffer = 0; |
| bitcount = 0; |
| bytecount = 0; |
| mode = mode_spi; |
| io0_oe = 0; |
| io1_oe = 0; |
| io2_oe = 0; |
| io3_oe = 0; |
| end else |
| if (xip_cmd) begin |
| buffer = xip_cmd; |
| bitcount = 0; |
| bytecount = 1; |
| spi_action; |
| end |
| end |
| |
| always @(csb, clk) begin |
| spi_io_vld = 0; |
| if (!csb && !clk) begin |
| if (dummycount > 0) begin |
| io0_oe = 0; |
| io1_oe = 0; |
| io2_oe = 0; |
| io3_oe = 0; |
| end else |
| case (mode) |
| mode_spi: begin |
| io0_oe = 0; |
| io1_oe = 1; |
| io2_oe = 0; |
| io3_oe = 0; |
| io1_dout = buffer[7]; |
| end |
| mode_dspi_rd: begin |
| io0_oe = 0; |
| io1_oe = 0; |
| io2_oe = 0; |
| io3_oe = 0; |
| end |
| mode_dspi_wr: begin |
| io0_oe = 1; |
| io1_oe = 1; |
| io2_oe = 0; |
| io3_oe = 0; |
| io0_dout = buffer[6]; |
| io1_dout = buffer[7]; |
| end |
| mode_qspi_rd: begin |
| io0_oe = 0; |
| io1_oe = 0; |
| io2_oe = 0; |
| io3_oe = 0; |
| end |
| mode_qspi_wr: begin |
| io0_oe = 1; |
| io1_oe = 1; |
| io2_oe = 1; |
| io3_oe = 1; |
| io0_dout = buffer[4]; |
| io1_dout = buffer[5]; |
| io2_dout = buffer[6]; |
| io3_dout = buffer[7]; |
| end |
| mode_qspi_ddr_rd: begin |
| ddr_rd_edge; |
| end |
| mode_qspi_ddr_wr: begin |
| ddr_wr_edge; |
| end |
| endcase |
| if (next_mode) begin |
| case (next_mode) |
| mode_qspi_ddr_rd: begin |
| io0_oe = 0; |
| io1_oe = 0; |
| io2_oe = 0; |
| io3_oe = 0; |
| end |
| mode_qspi_ddr_wr: begin |
| io0_oe = 1; |
| io1_oe = 1; |
| io2_oe = 1; |
| io3_oe = 1; |
| io0_dout = buffer[4]; |
| io1_dout = buffer[5]; |
| io2_dout = buffer[6]; |
| io3_dout = buffer[7]; |
| end |
| endcase |
| mode = next_mode; |
| next_mode = 0; |
| end |
| end |
| end |
| |
| always @(posedge clk) begin |
| if (!csb) begin |
| if (dummycount > 0) begin |
| dummycount = dummycount - 1; |
| end else |
| case (mode) |
| mode_spi: begin |
| buffer = {buffer, io0}; |
| bitcount = bitcount + 1; |
| if (bitcount == 8) begin |
| bitcount = 0; |
| bytecount = bytecount + 1; |
| spi_action; |
| end |
| end |
| mode_dspi_rd, mode_dspi_wr: begin |
| buffer = {buffer, io1, io0}; |
| bitcount = bitcount + 2; |
| if (bitcount == 8) begin |
| bitcount = 0; |
| bytecount = bytecount + 1; |
| spi_action; |
| end |
| end |
| mode_qspi_rd, mode_qspi_wr: begin |
| buffer = {buffer, io3, io2, io1, io0}; |
| bitcount = bitcount + 4; |
| if (bitcount == 8) begin |
| bitcount = 0; |
| bytecount = bytecount + 1; |
| spi_action; |
| end |
| end |
| mode_qspi_ddr_rd: begin |
| ddr_rd_edge; |
| end |
| mode_qspi_ddr_wr: begin |
| ddr_wr_edge; |
| end |
| endcase |
| end |
| end |
| endmodule |