verilog/rtl/DFFRAMBB.v

/*
    Building blocks for DFF based RAM compiler for SKY130A 
    BYTE        :   8 memory cells used as a building block for WORD module
    WORD        :   32-bit memory word with select and byte-level WE
    DEC6x64     :   2x4 Binary Decoder
    DEC6x64     :   6x64 Binary decoder
    MUX4x1_32   :   32-bit 4x1 MUX
    MUX2x1_32   :   32-bit 2x1 MUX
    SRAM64x32   :   Tri-state buffers based 64x32 DFF RAM 
    DFFRAM_COL4 :   A single column of 4 SRAM64x32 blocks using 4x1 multiplexors
*/
/*
    Author: Mohamed Shalan (mshalan@aucegypt.edu)
*/

module BYTE (
`ifdef USE_POWER_PINS
    input VPWR,
    input VGND,
`endif
    input CLK,
    input WE,
    input SEL,
    input [7:0] Di,
    output [7:0] Do
);

    wire [7:0]  q_wire;
    wire        we_wire;
    wire        SEL_B;
    wire        GCLK;

    sky130_fd_sc_hd__inv_1 INV(
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .Y(SEL_B), .A(SEL));
    sky130_fd_sc_hd__and2_1 CGAND( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .A(SEL), .B(WE), .X(we_wire) );
    sky130_fd_sc_hd__dlclkp_1 CG( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .CLK(CLK), .GCLK(GCLK), .GATE(we_wire) );

    generate 
        genvar i;
        for(i=0; i<8; i=i+1) begin : BIT
            sky130_fd_sc_hd__dfxtp_1 FF ( 
            `ifdef USE_POWER_PINS
                .VPWR(VPWR),
                .VGND(VGND),
                .VPB(VPWR),
                .VNB(VGND),
             `endif
                .D(Di[i]), .Q(q_wire[i]), .CLK(GCLK) );
            sky130_fd_sc_hd__ebufn_2 OBUF ( 
            `ifdef USE_POWER_PINS
                .VPWR(VPWR),
                .VGND(VGND),
                .VPB(VPWR),
                .VNB(VGND),
            `endif
                .A(q_wire[i]), .Z(Do[i]), .TE_B(SEL_B) );
        end
    endgenerate 

endmodule


module WORD32 (
`ifdef USE_POWER_PINS
    input VPWR,
    input VGND,
`endif
    input CLK,
    input [3:0] WE,
    input SEL,
    input [31:0] Di,
    output [31:0] Do
);

    BYTE B0 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
    `endif
        .CLK(CLK), .WE(WE[0]), .SEL(SEL), .Di(Di[7:0]), .Do(Do[7:0]) );
    BYTE B1 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
    `endif
        .CLK(CLK), .WE(WE[1]), .SEL(SEL), .Di(Di[15:8]), .Do(Do[15:8]) );
    BYTE B2 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
    `endif
        .CLK(CLK), .WE(WE[2]), .SEL(SEL), .Di(Di[23:16]), .Do(Do[23:16]) );
    BYTE B3 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
    `endif
        .CLK(CLK), .WE(WE[3]), .SEL(SEL), .Di(Di[31:24]), .Do(Do[31:24]) );
    
endmodule 

module DEC1x2 (
`ifdef USE_POWER_PINS
    input VPWR,
    input VGND,
`endif
    input           EN,
    input   [0:0]   A,
    output  [1:0]   SEL
);
    sky130_fd_sc_hd__and2b_2    AND1 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(SEL[0]), .A_N(A), .B(EN) );
    sky130_fd_sc_hd__and2_2     AND3 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(SEL[1]), .A(A), .B(A[0]) );
    
endmodule

module DEC2x4 (
`ifdef USE_POWER_PINS
    input VPWR,
    input VGND,
`endif
    input           EN,
    input   [1:0]   A,
    output  [3:0]   SEL
);
    sky130_fd_sc_hd__nor3b_4    AND0 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .Y(SEL[0]), .A(A[0]),   .B(A[1]), .C_N(EN) );
    sky130_fd_sc_hd__and3b_4    AND1 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(SEL[1]), .A_N(A[1]), .B(A[0]), .C(EN) );
    sky130_fd_sc_hd__and3b_4    AND2 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(SEL[2]), .A_N(A[0]), .B(A[1]), .C(EN) );
    sky130_fd_sc_hd__and3_4     AND3 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(SEL[3]), .A(A[1]),   .B(A[0]), .C(EN) );
    
endmodule

module DEC3x8 (
`ifdef USE_POWER_PINS
    input VPWR,
    input VGND,
`endif
    input           EN,
    input [2:0]     A,
    output [7:0]    SEL
);
    sky130_fd_sc_hd__nor4b_2   AND0 (
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
         .Y(SEL[0])  , .A(A[0]), .B(A[1])  , .C(A[2]), .D_N(EN) ); // 000
    sky130_fd_sc_hd__and4bb_2   AND1 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(SEL[1])  , .A_N(A[2]), .B_N(A[1]), .C(A[0])  , .D(EN) ); // 001
    sky130_fd_sc_hd__and4bb_2   AND2 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(SEL[2])  , .A_N(A[2]), .B_N(A[0]), .C(A[1])  , .D(EN) ); // 010
    sky130_fd_sc_hd__and4b_2    AND3 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(SEL[3])  , .A_N(A[2]), .B(A[1]), .C(A[0])  , .D(EN) );   // 011
    sky130_fd_sc_hd__and4bb_2   AND4 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(SEL[4])  , .A_N(A[0]), .B_N(A[1]), .C(A[2])  , .D(EN) ); // 100
    sky130_fd_sc_hd__and4b_2    AND5 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(SEL[5])  , .A_N(A[1]), .B(A[0]), .C(A[2])  , .D(EN) );   // 101
    sky130_fd_sc_hd__and4b_2    AND6 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(SEL[6])  , .A_N(A[0]), .B(A[1]), .C(A[2])  , .D(EN) );   // 110
    sky130_fd_sc_hd__and4_2     AND7 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(SEL[7])  , .A(A[0]), .B(A[1]), .C(A[2])  , .D(EN) ); // 111
endmodule


module DEC6x64 (
`ifdef USE_POWER_PINS
    input VPWR,
    input VGND,
`endif
    input           EN,
    input   [5:0]   A,
    output  [63:0] SEL
);
    wire [7:0] SEL0_w ;
    wire [2:0] A_buf;
    
    DEC3x8 DEC_L0 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
    `endif
        .EN(EN), .A(A[5:3]), .SEL(SEL0_w) );

    sky130_fd_sc_hd__clkbuf_16 ABUF[2:0] (
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(A_buf), .A(A[2:0]));

    generate
        genvar i;
        for(i=0; i<8; i=i+1) begin : DEC_L1
            DEC3x8 U ( 
            `ifdef USE_POWER_PINS
                .VPWR(VPWR),
                .VGND(VGND),
             `endif
                .EN(SEL0_w[i]), .A(A_buf), .SEL(SEL[7+8*i: 8*i]) );
        end
    endgenerate
endmodule

module MUX2x1_32(
`ifdef USE_POWER_PINS
    input VPWR,
    input VGND,
`endif
    input   [31:0]      A0, A1,
    input   [0:0]       S,
    output  [31:0]      X
);
    sky130_fd_sc_hd__mux2_1 MUX[31:0] (
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .A0(A0), .A1(A1), .S(S[0]), .X(X) );
endmodule

module MUX4x1_32(
`ifdef USE_POWER_PINS
    input VPWR,
    input VGND,
`endif
    input   [31:0]      A0, A1, A2, A3,
    input   [1:0]       S,
    output  [31:0]      X
);
    sky130_fd_sc_hd__mux4_1 MUX[31:0] (
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .A0(A0), .A1(A1), .A2(A2), .A3(A3), .S0(S[0]), .S1(S[1]), .X(X) );
endmodule

module PASS (
`ifdef USE_POWER_PINS
    input VPWR,
    input VGND,
`endif
    input [31:0] A, output [31:0] X);
    assign X = A;
endmodule

module SRAM64x32(
`ifdef USE_POWER_PINS
    input VPWR,
    input VGND,
`endif
    input CLK,
    input [3:0] WE,
    input EN,
    input [31:0] Di,
    output [31:0] Do,
    input [5:0] A
);

    wire [63:0]     SEL;
    wire [31:0]     Do_pre;
    wire [31:0]     Di_buf;
    wire            CLK_buf;
    wire [3:0]      WE_buf;

    sky130_fd_sc_hd__clkbuf_16 CLKBUF (
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(CLK_buf), .A(CLK));
    sky130_fd_sc_hd__clkbuf_16 WEBUF[3:0] (
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(WE_buf), .A(WE));
    sky130_fd_sc_hd__clkbuf_16 DIBUF[31:0] (
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(Di_buf), .A(Di));

    DEC6x64 DEC  ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
    `endif
        .EN(EN), .A(A), .SEL(SEL) );

    generate
        genvar i;
        for (i=0; i< 64; i=i+1) begin : WORD
            WORD32 W ( 
            `ifdef USE_POWER_PINS
                .VPWR(VPWR),
                .VGND(VGND),
            `endif
                .CLK(CLK_buf), .WE(WE_buf), .SEL(SEL[i]), .Di(Di_buf), .Do(Do_pre) );
        end
    endgenerate

    // Ensure that the Do_pre lines are not floating when EN = 0
    wire lo;
    wire float_buf_en;
    sky130_fd_sc_hd__clkbuf_4 FBUFENBUF( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(float_buf_en), .A(EN) );
    sky130_fd_sc_hd__conb_1 TIE (
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .LO(lo), .HI());
    sky130_fd_sc_hd__ebufn_4 FLOATBUF[31:0] ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .A( lo ), .Z(Do_pre), .TE_B(float_buf_en) );

    generate 
        //genvar i;
        for(i=0; i<32; i=i+1) begin : OUT
            sky130_fd_sc_hd__dfxtp_1 FF ( 
            `ifdef USE_POWER_PINS
                .VPWR(VPWR),
                .VGND(VGND),
                .VPB(VPWR),
                .VNB(VGND),
            `endif
                .D(Do_pre[i]), .Q(Do[i]), .CLK(CLK) );
        end
    endgenerate 

endmodule

module DFFRAM_COL4 
(
`ifdef USE_POWER_PINS
    VPWR,
    VGND,
`endif
    CLK,
    WE,
    EN,
    Di,
    Do,
    A
);

`ifdef USE_POWER_PINS
   input VPWR;
   input VGND;
`endif
    input           CLK;
    input   [3:0]   WE;
    input           EN;
    input   [31:0]  Di;
    output  [31:0]  Do;
    input   [7:0]   A;

    
    wire [31:0]     Di_buf;
    wire [31:0]     Do_pre;
    wire            CLK_buf;
    wire [3:0]      WE_buf;
    wire [5:3]      A_buf;

    wire [31:0]     Do_B_0_0;
    wire [31:0]     Do_B_0_1;
    wire [31:0]     Do_B_0_2;
    wire [31:0]     Do_B_0_3;

    wire [3:0]      row_sel;

    sky130_fd_sc_hd__clkbuf_8 CLKBUF (
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif

        .X(CLK_buf), .A(CLK));
    sky130_fd_sc_hd__clkbuf_8 WEBUF[3:0] (
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(WE_buf), .A(WE));
    sky130_fd_sc_hd__clkbuf_8 DIBUF[31:0] (
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(Di_buf), .A(Di));

    sky130_fd_sc_hd__clkbuf_16 ABUF[2:0] ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
        .VPB(VPWR),
        .VNB(VGND),
    `endif
        .X(A_buf), .A(A[5:3]) );
    
    DEC2x4 DEC ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
    `endif
        .EN(EN), .A(A[7:6]), .SEL(row_sel) );

    SRAM64x32 B_0_0 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
    `endif
        .CLK(CLK_buf), .WE(WE_buf), .EN(row_sel[0]), .Di(Di_buf), .Do(Do_B_0_0), .A({A_buf,A[2:0]}) );
    SRAM64x32 B_0_1 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
    `endif
        .CLK(CLK_buf), .WE(WE_buf), .EN(row_sel[1]), .Di(Di_buf), .Do(Do_B_0_1), .A({A_buf,A[2:0]}) );
    SRAM64x32 B_0_2 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
    `endif
        .CLK(CLK_buf), .WE(WE_buf), .EN(row_sel[2]), .Di(Di_buf), .Do(Do_B_0_2), .A({A_buf,A[2:0]}) );
    SRAM64x32 B_0_3 ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
    `endif
        .CLK(CLK_buf), .WE(WE_buf), .EN(row_sel[3]), .Di(Di_buf), .Do(Do_B_0_3), .A({A_buf,A[2:0]}) );

    MUX4x1_32 MUX ( 
    `ifdef USE_POWER_PINS
        .VPWR(VPWR),
        .VGND(VGND),
    `endif
        .A0(Do_B_0_0), .A1(Do_B_0_1), .A2(Do_B_0_2), .A3(Do_B_0_3), .S(A[7:6]), .X(Do) );

endmodule