| ######################################################################################################################## |
| # Copyright 2022 Mabrains Company LLC |
| # |
| # Licensed under the LGPL v2.1 License (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # https://www.gnu.org/licenses/old-licenses/lgpl-2.1.en.html |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| ## |
| ######################################################################################################################## |
| ## |
| ## Mabrains rectangualr_shielding Generator for Skywaters 130nm |
| ######################################################################################################################## |
| from .layers_definiations import * |
| import pya |
| import math |
| import pandas as pd |
| |
| """ |
| Mabrains Via Generator for Skywaters 130nm |
| """ |
| |
| |
| class triangular_shielding_Generator(pya.PCellDeclarationHelper): |
| """ |
| Mabrains Via Generator for Skywaters 130nm |
| """ |
| |
| def __init__(self): |
| ## Initialize super class. |
| super(triangular_shielding_Generator, self).__init__() |
| |
| # declare the parameters |
| self.param("W", self.TypeDouble, "Width of the conductors", default=2) |
| self.param("S", self.TypeDouble, "Spacing between conductors", default=4) |
| self.param("Louter", self.TypeDouble, "outer dimension", default=40) |
| |
| # self.param("via", self.TypeLayer, "via_layer", default = pya.LayerInfo(via_lay_num,via_lay_dt), hidden = True) |
| |
| # Below shows how to create hidden parameter is used to determine whether the radius has changed |
| # or the "s" handle has been moved |
| ## self.param("ru", self.TypeDouble, "Radius", default = 0.0, hidden = True) |
| ## self.param("rd", self.TypeDouble, "Double radius", readonly = True) |
| |
| def display_text_impl(self): |
| # Provide a descriptive text for the cell |
| return "( triangular_shielding spacing" + str(self.S) + " width = " + str(self.W) + ")" |
| |
| def coerce_parameters_impl(self): |
| |
| # We employ coerce_parameters_impl to decide whether the handle or the |
| # numeric parameter has changed (by comparing against the effective |
| # radius ru) and set ru to the effective radius. We also update the |
| # numerical value or the shape, depending on which on has not changed. |
| pass |
| |
| def can_create_from_shape_impl(self): |
| # Implement the "Create PCell from shape" protocol: we can use any shape which |
| # has a finite bounding box |
| return self.shape.is_box() or self.shape.is_polygon() or self.shape.is_path() |
| |
| def parameters_from_shape_impl(self): |
| # Implement the "Create PCell from shape" protocol: we set r and l from the shape's |
| # bounding box width and layer |
| # self.w = self.shape.bbox().width() * self.layout.dbu |
| # self.l = self.shape.bbox().length() * self.layout.dbu |
| self.ls = self.layout.get_info(self.layer) |
| |
| def transformation_from_shape_impl(self): |
| # Implement the "Create PCell from shape" protocol: we use the center of the shape's |
| # bounding box to determine the transformation |
| return pya.Trans(self.shape.bbox().p1()) |
| |
| def produce_impl(self): |
| |
| PERCISION = 1000 |
| |
| met1 = self.layout.layer(met1_lay_num, met1_lay_dt) |
| met2 = self.layout.layer(met2_lay_num, met2_lay_dt) |
| met3 = self.layout.layer(met3_lay_num, met3_lay_dt) |
| met4 = self.layout.layer(met4_lay_num, met4_lay_dt) |
| met5 = self.layout.layer(met5_lay_num, met5_lay_dt) |
| |
| via = self.layout.layer(via_lay_num, via_lay_dt) |
| via2 = self.layout.layer(via2_lay_num, via2_lay_dt) |
| via3 = self.layout.layer(via3_lay_num, via3_lay_dt) |
| via4 = self.layout.layer(via4_lay_num, via4_lay_dt) |
| |
| diff = self.layout.layer(diff_lay_num, diff_lay_dt) |
| psdm = self.layout.layer(psdm_lay_num, psdm_lay_dt) |
| licon1 = self.layout.layer(licon_lay_num, licon_lay_dt) |
| li1 = self.layout.layer(li_lay_num, li_lay_dt) |
| mcon = self.layout.layer(mcon_lay_num, mcon_lay_dt) |
| nwell = self.layout.layer(nwell_lay_num, nwell_lay_dt) |
| nsdm = self.layout.layer(nsdm_lay_num, nsdm_lay_dt) |
| |
| W = self.W * PERCISION # width of the conductors |
| S = self.S * PERCISION # minimum spacing between the conductors is 1.27*PERCISION due to the N_well |
| S_min = 1.27 * PERCISION |
| Lver = self.Louter * PERCISION # Lver==Lhor because it's assumed that the overall shape is square |
| Lhor = self.Louter * PERCISION |
| N_Conductors = int((Lhor + S) / (S + W)) # number of conductors |
| xcor = 0 |
| ycor = 0 |
| xcor2 = 0 |
| ycor2 = 0 |
| y_check = 0 |
| x_check = 0 |
| Shielding_with_diffusion = 1 |
| all_hole_points = [] |
| print(N_Conductors) |
| Diffusion_Width = 0.15 * PERCISION |
| Diffusion_Spacing = 0.27 * PERCISION |
| Diffusion_Encloses_Licon = 0.06 * PERCISION |
| |
| Nwell_width = 0.84 * PERCISION |
| Nwell_Spacing = 1.27 * PERCISION |
| |
| nsdm_Width = 0.38 * PERCISION |
| nsdm_Spacing = 0.38 * PERCISION |
| nsdm_Encloses_Diffusion = 0.125 * PERCISION |
| nsdm_Area_min = 0.265 * PERCISION * PERCISION |
| |
| Met1_Width = 0.14 * PERCISION |
| Met1_Spacing = 0.14 * PERCISION |
| Met1_Encloses_Mcon = 0.03 * PERCISION |
| Met1_Encloses_Mcon_Two_Sides = 0.06 * PERCISION |
| Met1_Area_min = 0.083 * PERCISION * PERCISION |
| |
| Psdm_Width = 0.38 * PERCISION |
| Psdm_Spacing = 0.38 * PERCISION |
| Psdm_Encloses_Diffusion = 0.125 * PERCISION |
| Psdm_Area_min = 0.255 * PERCISION * PERCISION |
| |
| Licon_Width_Length = 0.17 * PERCISION |
| Licon_Spacing = 0.17 * PERCISION |
| |
| Li_Width = 0.17 * PERCISION |
| Li_Spacing = 0.17 * PERCISION |
| Li_Area_min = 0.0561 * PERCISION * PERCISION |
| Li_Encloses_Licon_Two_Sides = 0.08 * PERCISION |
| |
| Mcon_Width_Length = 0.17 * PERCISION |
| Mcon_Spacing = 0.19 * PERCISION |
| |
| # find the number of licon needed for the horizontal distance |
| N_Licon_hor = int((W - 2 * Li_Encloses_Licon_Two_Sides + Licon_Spacing) / (Licon_Width_Length + Licon_Spacing)) |
| Remaining_Licon_hor = W - 2 * Li_Encloses_Licon_Two_Sides - N_Licon_hor * Licon_Width_Length - ( |
| N_Licon_hor - 1) * Licon_Spacing |
| |
| N_Licon_ver = int( |
| (Lver - 2 * Li_Encloses_Licon_Two_Sides + Licon_Spacing) / (Licon_Width_Length + Licon_Spacing)) |
| Remaining_Licon_ver = Lver - 2 * Li_Encloses_Licon_Two_Sides - N_Licon_ver * Licon_Width_Length - ( |
| N_Licon_ver - 1) * Licon_Spacing |
| |
| xcor_Licon = 0 |
| ycor_Licon = 0 |
| # print(N_Licon_hor,N_Licon_ver) |
| # find the number of mcon needed for the horizontal distance |
| N_Mcon_hor = int((W - 2 * Met1_Encloses_Mcon_Two_Sides + Mcon_Spacing) / (Mcon_Width_Length + Mcon_Spacing)) |
| Remaining_Mcon_hor = W - 2 * Met1_Encloses_Mcon_Two_Sides - N_Mcon_hor * Mcon_Width_Length - ( |
| N_Mcon_hor - 1) * Mcon_Spacing |
| |
| N_Mcon_ver = int((Lver - 2 * Met1_Encloses_Mcon_Two_Sides + Mcon_Spacing) / (Mcon_Width_Length + Mcon_Spacing)) |
| Remaining_Mcon_ver = Lver - 2 * Met1_Encloses_Mcon_Two_Sides - N_Mcon_ver * Mcon_Width_Length - ( |
| N_Mcon_ver - 1) * Mcon_Spacing |
| |
| xcor_Mcon = 0 |
| ycor_Mcon = 0 |
| |
| # print(N_Mcon_hor,N_Mcon_ver) |
| Slope = Lver / Lhor |
| |
| if N_Conductors % 2 == 0: # draw odd numbers of conductors |
| N_Conductors = N_Conductors - 1 |
| N_of_half_Conductors = int(N_Conductors / 2) |
| |
| for i in range(N_of_half_Conductors): # draw the vertical conductors |
| xcor = - Lhor / 2 + i * (W + S) |
| ycor = -Lver / 2 |
| self.cell.shapes(met1).insert( |
| pya.Box(xcor, ycor, xcor + W, ycor + (i + 1) * (W + S) * Slope)) # left down vertical conductors |
| self.cell.shapes(met1).insert( |
| pya.Box(-xcor, ycor, -xcor - W, ycor + (i + 1) * (W + S) * Slope)) # right down vertical conductors |
| self.cell.shapes(met1).insert(pya.Box(xcor, ycor + Lver, xcor + W, ycor + Lver - (i + 1) * ( |
| W + S) * Slope)) # left up vertical conductors |
| self.cell.shapes(met1).insert(pya.Box(-xcor, ycor + Lver, -xcor - W, ycor + Lver - (i + 1) * ( |
| W + S) * Slope)) # right up vertical conductors |
| |
| if Shielding_with_diffusion == 1: |
| self.cell.shapes(nwell).insert( |
| pya.Box(xcor, ycor, xcor + W, ycor + (i + 1) * (W + S) * Slope)) # left down vertical conductors |
| self.cell.shapes(nwell).insert( |
| pya.Box(-xcor, ycor, -xcor - W, ycor + (i + 1) * (W + S) * Slope)) # right down vertical conductors |
| self.cell.shapes(nwell).insert(pya.Box(xcor, ycor + Lver, xcor + W, |
| ycor + Lver - (i + 1) * ( |
| W + S) * Slope)) # left up vertical conductors |
| self.cell.shapes(nwell).insert(pya.Box(-xcor, ycor + Lver, -xcor - W, |
| ycor + Lver - (i + 1) * ( |
| W + S) * Slope)) # right up vertical conductors |
| |
| self.cell.shapes(li1).insert( |
| pya.Box(xcor, ycor, xcor + W, ycor + (i + 1) * (W + S) * Slope)) # left down vertical conductors |
| self.cell.shapes(li1).insert( |
| pya.Box(-xcor, ycor, -xcor - W, ycor + (i + 1) * (W + S) * Slope)) # right down vertical conductors |
| self.cell.shapes(li1).insert(pya.Box(xcor, ycor + Lver, xcor + W, |
| ycor + Lver - (i + 1) * ( |
| W + S) * Slope)) # left up vertical conductors |
| self.cell.shapes(li1).insert(pya.Box(-xcor, ycor + Lver, -xcor - W, |
| ycor + Lver - (i + 1) * ( |
| W + S) * Slope)) # right up vertical conductors |
| |
| self.cell.shapes(nsdm).insert( |
| pya.Box(xcor, ycor, xcor + W, ycor + (i + 1) * (W + S) * Slope)) # left down vertical conductors |
| self.cell.shapes(nsdm).insert( |
| pya.Box(-xcor, ycor, -xcor - W, ycor + (i + 1) * (W + S) * Slope)) # right down vertical conductors |
| self.cell.shapes(nsdm).insert(pya.Box(xcor, ycor + Lver, xcor + W, |
| ycor + Lver - (i + 1) * ( |
| W + S) * Slope)) # left up vertical conductors |
| self.cell.shapes(nsdm).insert(pya.Box(-xcor, ycor + Lver, -xcor - W, |
| ycor + Lver - (i + 1) * ( |
| W + S) * Slope)) # right up vertical conductors |
| |
| N_Licon_hor = int( |
| (W - 2 * Li_Encloses_Licon_Two_Sides + Licon_Spacing) / (Licon_Width_Length + Licon_Spacing)) |
| Remaining_Licon_hor = W - 2 * Li_Encloses_Licon_Two_Sides - N_Licon_hor * Licon_Width_Length - ( |
| N_Licon_hor - 1) * Licon_Spacing |
| |
| N_Licon_ver = int(((i + 1) * (W + S) * Slope - 2 * Li_Encloses_Licon_Two_Sides + Licon_Spacing) / ( |
| Licon_Width_Length + Licon_Spacing)) |
| Remaining_Licon_ver = (i + 1) * ( |
| W + S) * Slope - 2 * Li_Encloses_Licon_Two_Sides - N_Licon_ver * Licon_Width_Length - ( |
| N_Licon_ver - 1) * Licon_Spacing |
| for u in range(N_Licon_ver): |
| ycor_Licon = Li_Encloses_Licon_Two_Sides + Remaining_Licon_ver / 2 + u * ( |
| Licon_Width_Length + Licon_Spacing) |
| for k in range(N_Licon_hor): |
| xcor_Licon = Li_Encloses_Licon_Two_Sides + Remaining_Licon_hor / 2 + k * ( |
| Licon_Width_Length + Licon_Spacing) |
| self.cell.shapes(licon1).insert(pya.Box(xcor + xcor_Licon, ycor + ycor_Licon, |
| xcor + xcor_Licon + Licon_Width_Length, |
| ycor + ycor_Licon + Licon_Width_Length)) |
| self.cell.shapes(licon1).insert(pya.Box(-xcor - xcor_Licon, ycor + ycor_Licon, |
| -xcor - xcor_Licon - Licon_Width_Length, |
| ycor + ycor_Licon + Licon_Width_Length)) |
| self.cell.shapes(licon1).insert(pya.Box(xcor + xcor_Licon, ycor + Lver - ycor_Licon, |
| xcor + xcor_Licon + Licon_Width_Length, |
| ycor + Lver - ycor_Licon - Licon_Width_Length)) |
| self.cell.shapes(licon1).insert(pya.Box(-xcor - xcor_Licon, ycor + Lver - ycor_Licon, |
| -xcor - xcor_Licon - Licon_Width_Length, |
| ycor + Lver - ycor_Licon - Licon_Width_Length)) |
| N_Mcon_hor = int( |
| (W - 2 * Met1_Encloses_Mcon_Two_Sides + Mcon_Spacing) / (Mcon_Width_Length + Mcon_Spacing)) |
| Remaining_Mcon_hor = W - 2 * Met1_Encloses_Mcon_Two_Sides - N_Mcon_hor * Mcon_Width_Length - ( |
| N_Mcon_hor - 1) * Mcon_Spacing |
| |
| N_Mcon_ver = int(((i + 1) * (W + S) * Slope - 2 * Met1_Encloses_Mcon_Two_Sides + Mcon_Spacing) / ( |
| Mcon_Width_Length + Mcon_Spacing)) |
| Remaining_Mcon_ver = (i + 1) * ( |
| W + S) * Slope - 2 * Met1_Encloses_Mcon_Two_Sides - N_Mcon_ver * Mcon_Width_Length - ( |
| N_Mcon_ver - 1) * Mcon_Spacing |
| |
| for u in range(N_Mcon_ver): |
| ycor_Mcon = Met1_Encloses_Mcon_Two_Sides + Remaining_Mcon_ver / 2 + u * ( |
| Mcon_Width_Length + Mcon_Spacing) |
| for k in range(N_Mcon_hor): |
| xcor_Mcon = Met1_Encloses_Mcon_Two_Sides + Remaining_Mcon_hor / 2 + k * ( |
| Mcon_Width_Length + Mcon_Spacing) |
| self.cell.shapes(mcon).insert(pya.Box(xcor + xcor_Mcon, ycor + ycor_Mcon, |
| xcor + xcor_Mcon + Mcon_Width_Length, |
| ycor + ycor_Mcon + Mcon_Width_Length)) |
| self.cell.shapes(mcon).insert(pya.Box(-xcor - xcor_Mcon, ycor + ycor_Mcon, |
| -xcor - xcor_Mcon - Mcon_Width_Length, |
| ycor + ycor_Mcon + Mcon_Width_Length)) |
| self.cell.shapes(mcon).insert(pya.Box(xcor + xcor_Mcon, ycor + Lver - ycor_Mcon, |
| xcor + xcor_Mcon + Mcon_Width_Length, |
| ycor + Lver - ycor_Mcon - Mcon_Width_Length)) |
| self.cell.shapes(mcon).insert(pya.Box(-xcor - xcor_Mcon, ycor + Lver - ycor_Mcon, |
| -xcor - xcor_Mcon - Mcon_Width_Length, |
| ycor + Lver - ycor_Mcon - Mcon_Width_Length)) |
| |
| if i == N_of_half_Conductors - 1: |
| y_check = ycor + (i + 1) * (W + S) * Slope |
| |
| # drawing the rest of spaces for the vertical conductor |
| xcor = xcor + (W + S) |
| self.cell.shapes(met1).insert(pya.Box(xcor, ycor, -xcor, -S / 2)) |
| self.cell.shapes(met1).insert(pya.Box(xcor, ycor + Lver, -xcor, S / 2)) |
| if Shielding_with_diffusion == 1: |
| self.cell.shapes(nwell).insert(pya.Box(xcor, ycor, -xcor, -S / 2)) |
| self.cell.shapes(nwell).insert(pya.Box(xcor, ycor + Lver, -xcor, S / 2)) |
| self.cell.shapes(li1).insert(pya.Box(xcor, ycor, -xcor, -S / 2)) |
| self.cell.shapes(li1).insert(pya.Box(xcor, ycor + Lver, -xcor, S / 2)) |
| self.cell.shapes(nsdm).insert(pya.Box(xcor, ycor, -xcor, -S / 2)) |
| self.cell.shapes(nsdm).insert(pya.Box(xcor, ycor + Lver, -xcor, S / 2)) |
| N_Licon_hor = int( |
| (-2 * xcor - 2 * Li_Encloses_Licon_Two_Sides + Licon_Spacing) / (Licon_Width_Length + Licon_Spacing)) |
| Remaining_Licon_hor = -2 * xcor - 2 * Li_Encloses_Licon_Two_Sides - N_Licon_hor * Licon_Width_Length - ( |
| N_Licon_hor - 1) * Licon_Spacing |
| |
| N_Licon_ver = int(((-ycor - S / 2) - 2 * Li_Encloses_Licon_Two_Sides + Licon_Spacing) / ( |
| Licon_Width_Length + Licon_Spacing)) |
| Remaining_Licon_ver = ( |
| -ycor - S / 2) - 2 * Li_Encloses_Licon_Two_Sides - N_Licon_ver * Licon_Width_Length - ( |
| N_Licon_ver - 1) * Licon_Spacing |
| for u in range(N_Licon_ver): |
| ycor_Licon = Li_Encloses_Licon_Two_Sides + Remaining_Licon_ver / 2 + u * ( |
| Licon_Width_Length + Licon_Spacing) |
| for k in range(N_Licon_hor): |
| xcor_Licon = Li_Encloses_Licon_Two_Sides + Remaining_Licon_hor / 2 + k * ( |
| Licon_Width_Length + Licon_Spacing) |
| self.cell.shapes(licon1).insert(pya.Box(xcor + xcor_Licon, ycor + ycor_Licon, |
| xcor + xcor_Licon + Licon_Width_Length, |
| ycor + ycor_Licon + Licon_Width_Length)) |
| self.cell.shapes(licon1).insert(pya.Box(xcor + xcor_Licon, ycor + Lver - ycor_Licon, |
| xcor + xcor_Licon + Licon_Width_Length, |
| ycor + Lver - ycor_Licon - Licon_Width_Length)) |
| |
| N_Mcon_hor = int( |
| (-2 * xcor - 2 * Met1_Encloses_Mcon_Two_Sides + Mcon_Spacing) / (Mcon_Width_Length + Mcon_Spacing)) |
| Remaining_Mcon_hor = -2 * xcor - 2 * Met1_Encloses_Mcon_Two_Sides - N_Mcon_hor * Mcon_Width_Length - ( |
| N_Mcon_hor - 1) * Mcon_Spacing |
| |
| N_Mcon_ver = int(((-ycor - S / 2) - 2 * Met1_Encloses_Mcon_Two_Sides + Mcon_Spacing) / ( |
| Mcon_Width_Length + Mcon_Spacing)) |
| Remaining_Mcon_ver = (-ycor - S / 2) - 2 * Met1_Encloses_Mcon_Two_Sides - N_Mcon_ver * Mcon_Width_Length - ( |
| N_Mcon_ver - 1) * Mcon_Spacing |
| |
| for u in range(N_Mcon_ver): |
| ycor_Mcon = Met1_Encloses_Mcon_Two_Sides + Remaining_Mcon_ver / 2 + u * ( |
| Mcon_Width_Length + Mcon_Spacing) |
| for k in range(N_Mcon_hor): |
| xcor_Mcon = Met1_Encloses_Mcon_Two_Sides + Remaining_Mcon_hor / 2 + k * ( |
| Mcon_Width_Length + Mcon_Spacing) |
| self.cell.shapes(mcon).insert(pya.Box(xcor + xcor_Mcon, ycor + ycor_Mcon, |
| xcor + xcor_Mcon + Mcon_Width_Length, |
| ycor + ycor_Mcon + Mcon_Width_Length)) |
| self.cell.shapes(mcon).insert(pya.Box(xcor + xcor_Mcon, ycor + Lver - ycor_Mcon, |
| xcor + xcor_Mcon + Mcon_Width_Length, |
| ycor + Lver - ycor_Mcon - Mcon_Width_Length)) |
| |
| for j in range(N_of_half_Conductors - 1): # For loop for horizontal conductors |
| xcor2 = -Lhor / 2 |
| ycor2 = -Lver / 2 |
| self.cell.shapes(met1).insert( |
| pya.Box(xcor2, ycor2 + (j + 1) * (W + S) * Slope + S, xcor2 + (j + 1) * (W + S) * Slope - S |
| , ycor2 + (j + 1) * (W + S) * Slope + S + W)) # left down horizontal conductors |
| |
| self.cell.shapes(met1).insert( |
| pya.Box(xcor2, ycor2 + Lver - (j + 1) * (W + S) * Slope - S, xcor2 + (j + 1) * (W + S) * Slope - S |
| , ycor2 + Lver - (j + 1) * (W + S) * Slope - S - W)) # left up horizontal conductors |
| |
| self.cell.shapes(met1).insert(pya.Box(xcor2 + Lhor, ycor2 + (j + 1) * (W + S) * Slope + S, |
| xcor2 + Lhor - (j + 1) * (W + S) * Slope + S |
| , ycor2 + (j + 1) * ( |
| W + S) * Slope + S + W)) # right down horizontal conductors |
| |
| self.cell.shapes(met1).insert(pya.Box(xcor2 + Lhor, ycor2 + Lver - (j + 1) * (W + S) * Slope - S, |
| xcor2 + Lhor - (j + 1) * (W + S) * Slope + S |
| , ycor2 + Lver - (j + 1) * ( |
| W + S) * Slope - S - W)) # right up horizontal conductors |
| if Shielding_with_diffusion == 1: |
| self.cell.shapes(nwell).insert( |
| pya.Box(xcor2, ycor2 + (j + 1) * (W + S) * Slope + S, xcor2 + (j + 1) * (W + S) * Slope - S |
| , ycor2 + (j + 1) * (W + S) * Slope + S + W)) # left down horizontal conductors |
| |
| self.cell.shapes(nwell).insert( |
| pya.Box(xcor2, ycor2 + Lver - (j + 1) * (W + S) * Slope - S, xcor2 + (j + 1) * (W + S) * Slope - S |
| , ycor2 + Lver - (j + 1) * (W + S) * Slope - S - W)) # left up horizontal conductors |
| |
| self.cell.shapes(nwell).insert( |
| pya.Box(xcor2 + Lhor, ycor2 + (j + 1) * (W + S) * Slope + S, |
| xcor2 + Lhor - (j + 1) * (W + S) * Slope + S |
| , ycor2 + (j + 1) * (W + S) * Slope + S + W)) # left down horizontal conductors |
| |
| self.cell.shapes(nwell).insert(pya.Box(xcor2 + Lhor, ycor2 + Lver - (j + 1) * (W + S) * Slope - S, |
| xcor2 + Lhor - (j + 1) * (W + S) * Slope + S |
| , ycor2 + Lver - (j + 1) * ( |
| W + S) * Slope - S - W)) # left up horizontal conductors |
| |
| self.cell.shapes(li1).insert( |
| pya.Box(xcor2, ycor2 + (j + 1) * (W + S) * Slope + S, xcor2 + (j + 1) * (W + S) * Slope - S |
| , ycor2 + (j + 1) * (W + S) * Slope + S + W)) # left down horizontal conductors |
| |
| self.cell.shapes(li1).insert( |
| pya.Box(xcor2, ycor2 + Lver - (j + 1) * (W + S) * Slope - S, xcor2 + (j + 1) * (W + S) * Slope - S |
| , ycor2 + Lver - (j + 1) * (W + S) * Slope - S - W)) # left up horizontal conductors |
| |
| self.cell.shapes(li1).insert( |
| pya.Box(xcor2 + Lhor, ycor2 + (j + 1) * (W + S) * Slope + S, |
| xcor2 + Lhor - (j + 1) * (W + S) * Slope + S |
| , ycor2 + (j + 1) * (W + S) * Slope + S + W)) # left down horizontal conductors |
| |
| self.cell.shapes(li1).insert(pya.Box(xcor2 + Lhor, ycor2 + Lver - (j + 1) * (W + S) * Slope - S, |
| xcor2 + Lhor - (j + 1) * (W + S) * Slope + S |
| , ycor2 + Lver - (j + 1) * ( |
| W + S) * Slope - S - W)) # left up horizontal conductors |
| |
| self.cell.shapes(nsdm).insert( |
| pya.Box(xcor2, ycor2 + (j + 1) * (W + S) * Slope + S, xcor2 + (j + 1) * (W + S) * Slope - S |
| , ycor2 + (j + 1) * (W + S) * Slope + S + W)) # left down horizontal conductors |
| |
| self.cell.shapes(nsdm).insert( |
| pya.Box(xcor2, ycor2 + Lver - (j + 1) * (W + S) * Slope - S, xcor2 + (j + 1) * (W + S) * Slope - S |
| , ycor2 + Lver - (j + 1) * (W + S) * Slope - S - W)) # left up horizontal conductors |
| |
| self.cell.shapes(nsdm).insert( |
| pya.Box(xcor2 + Lhor, ycor2 + (j + 1) * (W + S) * Slope + S, |
| xcor2 + Lhor - (j + 1) * (W + S) * Slope + S |
| , ycor2 + (j + 1) * (W + S) * Slope + S + W)) # left down horizontal conductors |
| |
| self.cell.shapes(nsdm).insert(pya.Box(xcor2 + Lhor, ycor2 + Lver - (j + 1) * (W + S) * Slope - S, |
| xcor2 + Lhor - (j + 1) * (W + S) * Slope + S |
| , ycor2 + Lver - (j + 1) * ( |
| W + S) * Slope - S - W)) # left up horizontal conductors |
| |
| N_Licon_hor = int(((j + 1) * (W + S) * Slope - S - 2 * Li_Encloses_Licon_Two_Sides + Licon_Spacing) / ( |
| Licon_Width_Length + Licon_Spacing)) |
| Remaining_Licon_hor = (j + 1) * ( |
| W + S) * Slope - S - 2 * Li_Encloses_Licon_Two_Sides - N_Licon_hor * Licon_Width_Length - ( |
| N_Licon_hor - 1) * Licon_Spacing |
| |
| N_Licon_ver = int((W - 2 * Li_Encloses_Licon_Two_Sides + Licon_Spacing) / ( |
| Licon_Width_Length + Licon_Spacing)) |
| Remaining_Licon_ver = W - 2 * Li_Encloses_Licon_Two_Sides - N_Licon_ver * Licon_Width_Length - ( |
| N_Licon_ver - 1) * Licon_Spacing |
| for u in range(N_Licon_ver): |
| ycor_Licon = Li_Encloses_Licon_Two_Sides + Remaining_Licon_ver / 2 + u * ( |
| Licon_Width_Length + Licon_Spacing) |
| for k in range(N_Licon_hor): |
| xcor_Licon = Li_Encloses_Licon_Two_Sides + Remaining_Licon_hor / 2 + k * ( |
| Licon_Width_Length + Licon_Spacing) |
| self.cell.shapes(licon1).insert( |
| pya.Box(xcor2 + xcor_Licon, ycor2 + (j + 1) * (W + S) * Slope + S + ycor_Licon, |
| xcor2 + xcor_Licon + Licon_Width_Length, |
| ycor2 + (j + 1) * (W + S) * Slope + S + ycor_Licon + Licon_Width_Length)) |
| self.cell.shapes(licon1).insert( |
| pya.Box(xcor2 + xcor_Licon, ycor2 + Lver - (j + 1) * (W + S) * Slope - S - ycor_Licon, |
| xcor2 + xcor_Licon + Licon_Width_Length, |
| ycor2 + Lver - (j + 1) * (W + S) * Slope - S - ycor_Licon - Licon_Width_Length)) |
| self.cell.shapes(licon1).insert( |
| pya.Box(xcor2 + Lhor - xcor_Licon, ycor2 + (j + 1) * (W + S) * Slope + S + ycor_Licon, |
| xcor2 + Lhor - xcor_Licon - Licon_Width_Length, |
| ycor2 + (j + 1) * (W + S) * Slope + S + ycor_Licon + Licon_Width_Length)) |
| self.cell.shapes(licon1).insert( |
| pya.Box(xcor2 + Lhor - xcor_Licon, |
| ycor2 + Lver - (j + 1) * (W + S) * Slope - S - ycor_Licon, |
| xcor2 + Lhor - xcor_Licon - Licon_Width_Length, |
| ycor2 + Lver - (j + 1) * (W + S) * Slope - S - ycor_Licon - Licon_Width_Length)) |
| N_Mcon_hor = int(((j + 1) * (W + S) * Slope - S - 2 * Met1_Encloses_Mcon_Two_Sides + Mcon_Spacing) / ( |
| Mcon_Width_Length + Mcon_Spacing)) |
| Remaining_Mcon_hor = (j + 1) * ( |
| W + S) * Slope - S - 2 * Met1_Encloses_Mcon_Two_Sides - N_Mcon_hor * Mcon_Width_Length - ( |
| N_Mcon_hor - 1) * Mcon_Spacing |
| |
| N_Mcon_ver = int((W - 2 * Met1_Encloses_Mcon_Two_Sides + Mcon_Spacing) / ( |
| Mcon_Width_Length + Mcon_Spacing)) |
| Remaining_Mcon_ver = W - 2 * Met1_Encloses_Mcon_Two_Sides - N_Mcon_ver * Mcon_Width_Length - ( |
| N_Mcon_ver - 1) * Mcon_Spacing |
| for u in range(N_Mcon_ver): |
| ycor_Mcon = Met1_Encloses_Mcon_Two_Sides + Remaining_Mcon_ver / 2 + u * ( |
| Mcon_Width_Length + Mcon_Spacing) |
| for k in range(N_Mcon_hor): |
| xcor_Mcon = Met1_Encloses_Mcon_Two_Sides + Remaining_Mcon_hor / 2 + k * ( |
| Mcon_Width_Length + Mcon_Spacing) |
| self.cell.shapes(mcon).insert( |
| pya.Box(xcor2 + xcor_Mcon, ycor2 + (j + 1) * (W + S) * Slope + S + ycor_Mcon, |
| xcor2 + xcor_Mcon + Mcon_Width_Length, |
| ycor2 + (j + 1) * (W + S) * Slope + S + ycor_Mcon + Mcon_Width_Length)) |
| self.cell.shapes(mcon).insert( |
| pya.Box(xcor2 + xcor_Mcon, ycor2 + Lver - (j + 1) * (W + S) * Slope - S - ycor_Mcon, |
| xcor2 + xcor_Mcon + Mcon_Width_Length, |
| ycor2 + Lver - (j + 1) * (W + S) * Slope - S - ycor_Mcon - Mcon_Width_Length)) |
| self.cell.shapes(mcon).insert( |
| pya.Box(xcor2 + Lhor - xcor_Mcon, ycor2 + (j + 1) * (W + S) * Slope + S + ycor_Mcon, |
| xcor2 + Lhor - xcor_Mcon - Mcon_Width_Length, |
| ycor2 + (j + 1) * (W + S) * Slope + S + ycor_Mcon + Mcon_Width_Length)) |
| self.cell.shapes(mcon).insert( |
| pya.Box(xcor2 + Lhor - xcor_Mcon, ycor2 + Lver - (j + 1) * (W + S) * Slope - S - ycor_Mcon, |
| xcor2 + Lhor - xcor_Mcon - Mcon_Width_Length, |
| ycor2 + Lver - (j + 1) * (W + S) * Slope - S - ycor_Mcon - Mcon_Width_Length)) |
| |
| # y_check is used for drawing the rest of spaces for the horizontal conductors |
| if j == N_of_half_Conductors - 2: |
| x_check = xcor2 + (j + 1) * (W + S) * Slope + W |
| if (-y_check * 2) >= (2 * S + 0.14): |
| self.cell.shapes(met1).insert(pya.Box(xcor2, y_check + S, x_check, -y_check - S)) |
| self.cell.shapes(met1).insert(pya.Box(xcor2 + Lhor, y_check + S, -x_check, -y_check - S)) |
| if Shielding_with_diffusion == 1: |
| self.cell.shapes(nwell).insert(pya.Box(xcor2, y_check + S, x_check, -y_check - S)) |
| self.cell.shapes(nwell).insert(pya.Box(xcor2 + Lhor, y_check + S, -x_check, -y_check - S)) |
| self.cell.shapes(li1).insert(pya.Box(xcor2, y_check + S, x_check, -y_check - S)) |
| self.cell.shapes(li1).insert(pya.Box(xcor2 + Lhor, y_check + S, -x_check, -y_check - S)) |
| self.cell.shapes(nsdm).insert(pya.Box(xcor2, y_check + S, x_check, -y_check - S)) |
| self.cell.shapes(nsdm).insert(pya.Box(xcor2 + Lhor, y_check + S, -x_check, -y_check - S)) |
| N_Licon_hor = int(((x_check - xcor2) - 2 * Li_Encloses_Licon_Two_Sides + Licon_Spacing) / ( |
| Licon_Width_Length + Licon_Spacing)) |
| Remaining_Licon_hor = ( |
| x_check - xcor2) - 2 * Li_Encloses_Licon_Two_Sides - N_Licon_hor * Licon_Width_Length - ( |
| N_Licon_hor - 1) * Licon_Spacing |
| |
| N_Licon_ver = int((-y_check * 2 - 2 * S - 2 * Li_Encloses_Licon_Two_Sides + Licon_Spacing) / ( |
| Licon_Width_Length + Licon_Spacing)) |
| Remaining_Licon_ver = -y_check * 2 - 2 * S - 2 * Li_Encloses_Licon_Two_Sides - N_Licon_ver * Licon_Width_Length - ( |
| N_Licon_ver - 1) * Licon_Spacing |
| for u in range(N_Licon_ver): |
| ycor_Licon = Li_Encloses_Licon_Two_Sides + Remaining_Licon_ver / 2 + u * ( |
| Licon_Width_Length + Licon_Spacing) |
| for k in range(N_Licon_hor): |
| xcor_Licon = Li_Encloses_Licon_Two_Sides + Remaining_Licon_hor / 2 + k * ( |
| Licon_Width_Length + Licon_Spacing) |
| self.cell.shapes(licon1).insert( |
| pya.Box(xcor2 + xcor_Licon, y_check + S + ycor_Licon, |
| xcor2 + xcor_Licon + Licon_Width_Length, |
| y_check + S + ycor_Licon + Licon_Width_Length)) |
| |
| self.cell.shapes(licon1).insert( |
| pya.Box(xcor2 + Lhor - xcor_Licon, y_check + S + ycor_Licon, |
| xcor2 + Lhor - xcor_Licon - Licon_Width_Length, |
| y_check + S + ycor_Licon + Licon_Width_Length)) |
| |
| N_Mcon_hor = int(((x_check - xcor2) - 2 * Met1_Encloses_Mcon_Two_Sides + Mcon_Spacing) / ( |
| Mcon_Width_Length + Mcon_Spacing)) |
| Remaining_Mcon_hor = ( |
| x_check - xcor2) - 2 * Met1_Encloses_Mcon_Two_Sides - N_Mcon_hor * Mcon_Width_Length - ( |
| N_Mcon_hor - 1) * Mcon_Spacing |
| |
| N_Mcon_ver = int((-y_check * 2 - 2 * S - 2 * Met1_Encloses_Mcon_Two_Sides + Mcon_Spacing) / ( |
| Mcon_Width_Length + Mcon_Spacing)) |
| Remaining_Mcon_ver = -y_check * 2 - 2 * S - 2 * Met1_Encloses_Mcon_Two_Sides - N_Mcon_ver * Mcon_Width_Length - ( |
| N_Mcon_ver - 1) * Mcon_Spacing |
| |
| for u in range(N_Mcon_ver): |
| ycor_Mcon = Met1_Encloses_Mcon_Two_Sides + Remaining_Mcon_ver / 2 + u * ( |
| Mcon_Width_Length + Mcon_Spacing) |
| for k in range(N_Mcon_hor): |
| xcor_Mcon = Met1_Encloses_Mcon_Two_Sides + Remaining_Mcon_hor / 2 + k * ( |
| Mcon_Width_Length + Mcon_Spacing) |
| self.cell.shapes(mcon).insert( |
| pya.Box(xcor2 + xcor_Mcon, y_check + S + ycor_Mcon, |
| xcor2 + xcor_Mcon + Mcon_Width_Length, |
| y_check + S + ycor_Mcon + Mcon_Width_Length)) |
| |
| self.cell.shapes(mcon).insert( |
| pya.Box(xcor2 + Lhor - xcor_Mcon, y_check + S + ycor_Mcon, |
| xcor2 + Lhor - xcor_Mcon - Mcon_Width_Length, |
| y_check + S + ycor_Mcon + Mcon_Width_Length)) |
| |
| |
