blob: 28ca1404ea743365f89346c236ce9f809876b0ad [file] [log] [blame]
`default_nettype none
/*
`ifdef COCOTB
`define UNIT_DELAY #1
`define FUNCTIONAL
`define USE_POWER_PINS
`include "libs.ref/sky130_fd_sc_hd/verilog/primitives.v"
`include "libs.ref/sky130_fd_sc_hd/verilog/sky130_fd_sc_hd.v"
`endif
*/
module scan_wrapper_341353928049295956 (
input wire clk_in,
input wire data_in,
input wire scan_select_in,
input wire latch_enable_in,
output wire clk_out,
output wire data_out,
output wire scan_select_out,
output wire latch_enable_out
);
assign scan_select_out = scan_select_in;
assign latch_enable_out = latch_enable_in;
assign clk_out = clk_in;
wire clk = clk_in;
/*
`ifdef COCOTB
initial begin
$dumpfile ("scan_wrapper.vcd");
$dumpvars (0, scan_wrapper_lesson_1);
#1;
end
`endif
*/
parameter NUM_IOS = 8;
// wires needed
wire [NUM_IOS-1:0] scan_data_out; // output of the each scan chain flop
wire [NUM_IOS-1:0] scan_data_in; // input of each scan chain flop
wire [NUM_IOS-1:0] module_data_in; // the data that enters the user module
wire [NUM_IOS-1:0] module_data_out; // the data from the user module
// scan chain - link all the flops, with data coming from data_in
assign scan_data_in = {scan_data_out[NUM_IOS-2:0], data_in};
// end of the chain is the last scan flop's out
assign data_out = scan_data_out[NUM_IOS-1];
// scan flops have a mux on their inputs to choose either data from the user module or the previous flop's output
// https://antmicro-skywater-pdk-docs.readthedocs.io/en/test-submodules-in-rtd/contents/libraries/sky130_fd_sc_ls/cells/sdfxtp/README.html
`ifndef FORMAL
`ifndef FORMAL_COMPAT
sky130_fd_sc_hd__sdfxtp_1 scan_flop [NUM_IOS-1:0] (
.CLK (clk),
.D (scan_data_in),
.SCD (module_data_out),
.SCE (scan_select_in),
.Q (scan_data_out),
.VPWR (1'b1),
.VGND (1'b0)
);
// latch is used to latch the input data of the user module while the scan chain is used to capture the user module's outputs
// https://antmicro-skywater-pdk-docs.readthedocs.io/en/test-submodules-in-rtd/contents/libraries/sky130_fd_sc_hd/cells/dlxtp/README.html
sky130_fd_sc_hd__dlxtp_1 latch [NUM_IOS-1:0] (
.D (scan_data_out),
.GATE (latch_enable_in),
.Q (module_data_in),
.VPWR (1'b1),
.VGND (1'b0)
);
`endif
`endif
// instantiate the wokwi module
user_module_341353928049295956 user_module(
.io_in (module_data_in),
.io_out (module_data_out)
);
endmodule