re-hardening with mpw-7 tool set and sky130b pdk
diff --git a/openlane/pinmux/config.tcl b/openlane/pinmux/config.tcl
index 26ce028..c27d14e 100755
--- a/openlane/pinmux/config.tcl
+++ b/openlane/pinmux/config.tcl
@@ -41,24 +41,24 @@
# Local sources + no2usb sources
set ::env(VERILOG_FILES) "\
- $script_dir/../../verilog/rtl/clk_skew_adjust/src/clk_skew_adjust.gv \
- $script_dir/../../verilog/rtl/pinmux/src/pinmux.sv \
- $script_dir/../../verilog/rtl/pinmux/src/pinmux_reg.sv \
- $script_dir/../../verilog/rtl/pinmux/src/gpio_intr.sv \
- $script_dir/../../verilog/rtl/pinmux/src/pwm.sv \
- $script_dir/../../verilog/rtl/pinmux/src/timer.sv \
- $script_dir/../../verilog/rtl/lib/pulse_gen_type1.sv \
- $script_dir/../../verilog/rtl/lib/pulse_gen_type2.sv \
- $script_dir/../../verilog/rtl/lib/registers.v \
- $script_dir/../../verilog/rtl/lib/ctech_cells.sv \
- $script_dir/../../verilog/rtl/lib/reset_sync.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/clk_skew_adjust/src/clk_skew_adjust.gv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/pinmux/src/pinmux.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/pinmux/src/pinmux_reg.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/pinmux/src/gpio_intr.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/pinmux/src/pwm.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/pinmux/src/timer.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/pulse_gen_type1.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/pulse_gen_type2.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/registers.v \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/ctech_cells.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/reset_sync.sv \
"
set ::env(SYNTH_DEFINES) [list SYNTHESIS ]
set ::env(SYNTH_READ_BLACKBOX_LIB) 1
-set ::env(SDC_FILE) "$script_dir/base.sdc"
-set ::env(BASE_SDC_FILE) "$script_dir/base.sdc"
+set ::env(SDC_FILE) $::env(DESIGN_DIR)/base.sdc
+set ::env(BASE_SDC_FILE) $::env(DESIGN_DIR)/base.sdc
set ::env(LEC_ENABLE) 0
@@ -102,7 +102,7 @@
#set ::env(GLB_RT_MAXLAYER) 5
set ::env(RT_MAX_LAYER) {met4}
-set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 10
+#set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 10
set ::env(DIODE_INSERTION_STRATEGY) 4
diff --git a/openlane/qspim_top/base.sdc b/openlane/qspim_top/base.sdc
index 327d1f4..c0e8993 100644
--- a/openlane/qspim_top/base.sdc
+++ b/openlane/qspim_top/base.sdc
@@ -24,7 +24,7 @@
set_propagated_clock [get_clocks {spiclk}]
set_clock_transition 0.1500 [all_clocks]
-set_clock_uncertainty -setup 0.2500 [all_clocks]
+set_clock_uncertainty -setup 0.5000 [all_clocks]
set_clock_uncertainty -hold 0.2500 [all_clocks]
set ::env(SYNTH_TIMING_DERATE) 0.05
diff --git a/openlane/qspim_top/config.tcl b/openlane/qspim_top/config.tcl
index 187e486..0ce98bf 100755
--- a/openlane/qspim_top/config.tcl
+++ b/openlane/qspim_top/config.tcl
@@ -41,23 +41,23 @@
# Local sources + no2usb sources
set ::env(VERILOG_FILES) "\
- $script_dir/../../verilog/rtl/lib/clk_skew_adjust.gv \
- $script_dir/../../verilog/rtl/lib/reset_sync.sv \
- $script_dir/../../verilog/rtl/qspim/src/qspim_top.sv \
- $script_dir/../../verilog/rtl/qspim/src/qspim_if.sv \
- $script_dir/../../verilog/rtl/qspim/src/qspim_regs.sv \
- $script_dir/../../verilog/rtl/qspim/src/qspim_fifo.sv \
- $script_dir/../../verilog/rtl/qspim/src/qspim_clkgen.sv \
- $script_dir/../../verilog/rtl/qspim/src/qspim_ctrl.sv \
- $script_dir/../../verilog/rtl/qspim/src/qspim_rx.sv \
- $script_dir/../../verilog/rtl/qspim/src/qspim_tx.sv \
- $script_dir/../../verilog/rtl/lib/ctech_cells.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/clk_skew_adjust.gv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/reset_sync.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/qspim/src/qspim_top.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/qspim/src/qspim_if.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/qspim/src/qspim_regs.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/qspim/src/qspim_fifo.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/qspim/src/qspim_clkgen.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/qspim/src/qspim_ctrl.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/qspim/src/qspim_rx.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/qspim/src/qspim_tx.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/ctech_cells.sv \
"
set ::env(SYNTH_DEFINES) [list SYNTHESIS ]
set ::env(SYNTH_READ_BLACKBOX_LIB) 1
-set ::env(SDC_FILE) "$script_dir/base.sdc"
-set ::env(BASE_SDC_FILE) "$script_dir/base.sdc"
+set ::env(SDC_FILE) $::env(DESIGN_DIR)/base.sdc
+set ::env(BASE_SDC_FILE) $::env(DESIGN_DIR)/base.sdc
set ::env(LEC_ENABLE) 0
@@ -95,7 +95,7 @@
#set ::env(GLB_RT_MAXLAYER) 5
set ::env(RT_MAX_LAYER) {met4}
-set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 10
+#set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 10
set ::env(DIODE_INSERTION_STRATEGY) 4
diff --git a/openlane/uart_i2cm_usb_spi_top/base.sdc b/openlane/uart_i2cm_usb_spi_top/base.sdc
index 4a33fc5..623b2ef 100644
--- a/openlane/uart_i2cm_usb_spi_top/base.sdc
+++ b/openlane/uart_i2cm_usb_spi_top/base.sdc
@@ -12,7 +12,7 @@
create_clock -name usb_clk -period 100.0000 [get_ports {usb_clk}]
set_clock_transition 0.1500 [all_clocks]
-set_clock_uncertainty -setup 0.2500 [all_clocks]
+set_clock_uncertainty -setup 0.5000 [all_clocks]
set_clock_uncertainty -hold 0.2500 [all_clocks]
@@ -44,7 +44,7 @@
set_input_delay -min 1.5000 -clock [get_clocks {app_clk}] -add_delay [get_ports {usb_rstn}]
-set_input_delay -max 6.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_addr[*]}]
+set_input_delay -max 5.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_addr[*]}]
set_input_delay -max 6.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_be[*]}]
set_input_delay -max 6.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_cs}]
set_input_delay -max 6.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_wdata[*]}]
diff --git a/openlane/uart_i2cm_usb_spi_top/config.tcl b/openlane/uart_i2cm_usb_spi_top/config.tcl
index 802f0cf..586d0e1 100644
--- a/openlane/uart_i2cm_usb_spi_top/config.tcl
+++ b/openlane/uart_i2cm_usb_spi_top/config.tcl
@@ -41,44 +41,44 @@
# Local sources + no2usb sources
set ::env(VERILOG_FILES) "\
- $script_dir/../../verilog/rtl/clk_skew_adjust/src/clk_skew_adjust.gv \
- $script_dir/../../verilog/rtl/uart/src/uart_core.sv \
- $script_dir/../../verilog/rtl/uart/src/uart_cfg.sv \
- $script_dir/../../verilog/rtl/uart/src/uart_rxfsm.sv \
- $script_dir/../../verilog/rtl/uart/src/uart_txfsm.sv \
- $script_dir/../../verilog/rtl/lib/async_wb.sv \
- $script_dir/../../verilog/rtl/lib/async_fifo.sv \
- $script_dir/../../verilog/rtl/lib/async_fifo_th.sv \
- $script_dir/../../verilog/rtl/lib/reset_sync.sv \
- $script_dir/../../verilog/rtl/lib/double_sync_low.v \
- $script_dir/../../verilog/rtl/lib/clk_ctl.v \
- $script_dir/../../verilog/rtl/lib/registers.v \
- $script_dir/../../verilog/rtl/i2cm/src/core/i2cm_bit_ctrl.v \
- $script_dir/../../verilog/rtl/i2cm/src/core/i2cm_byte_ctrl.v \
- $script_dir/../../verilog/rtl/i2cm/src/core/i2cm_top.v \
- $script_dir/../../verilog/rtl/usb1_host/src/core/usbh_core.sv \
- $script_dir/../../verilog/rtl/usb1_host/src/core/usbh_crc16.sv \
- $script_dir/../../verilog/rtl/usb1_host/src/core/usbh_crc5.sv \
- $script_dir/../../verilog/rtl/usb1_host/src/core/usbh_fifo.sv \
- $script_dir/../../verilog/rtl/usb1_host/src/core/usbh_sie.sv \
- $script_dir/../../verilog/rtl/usb1_host/src/phy/usb_fs_phy.v \
- $script_dir/../../verilog/rtl/usb1_host/src/phy/usb_transceiver.v\
- $script_dir/../../verilog/rtl/usb1_host/src/top/usb1_host.sv \
- $script_dir/../../verilog/rtl/sspim/src/sspim_top.sv \
- $script_dir/../../verilog/rtl/sspim/src/sspim_ctl.sv \
- $script_dir/../../verilog/rtl/sspim/src/sspim_if.sv \
- $script_dir/../../verilog/rtl/sspim/src/sspim_cfg.sv \
- $script_dir/../../verilog/rtl/uart_i2c_usb_spi/src/uart_i2c_usb_spi.sv\
- $script_dir/../../verilog/rtl/lib/ctech_cells.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/clk_skew_adjust/src/clk_skew_adjust.gv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/uart/src/uart_core.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/uart/src/uart_cfg.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/uart/src/uart_rxfsm.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/uart/src/uart_txfsm.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/async_wb.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/async_fifo.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/async_fifo_th.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/reset_sync.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/double_sync_low.v \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/clk_ctl.v \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/registers.v \
+ $::env(DESIGN_DIR)/../../verilog/rtl/i2cm/src/core/i2cm_bit_ctrl.v \
+ $::env(DESIGN_DIR)/../../verilog/rtl/i2cm/src/core/i2cm_byte_ctrl.v \
+ $::env(DESIGN_DIR)/../../verilog/rtl/i2cm/src/core/i2cm_top.v \
+ $::env(DESIGN_DIR)/../../verilog/rtl/usb1_host/src/core/usbh_core.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/usb1_host/src/core/usbh_crc16.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/usb1_host/src/core/usbh_crc5.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/usb1_host/src/core/usbh_fifo.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/usb1_host/src/core/usbh_sie.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/usb1_host/src/phy/usb_fs_phy.v \
+ $::env(DESIGN_DIR)/../../verilog/rtl/usb1_host/src/phy/usb_transceiver.v\
+ $::env(DESIGN_DIR)/../../verilog/rtl/usb1_host/src/top/usb1_host.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/sspim/src/sspim_top.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/sspim/src/sspim_ctl.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/sspim/src/sspim_if.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/sspim/src/sspim_cfg.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/uart_i2c_usb_spi/src/uart_i2c_usb_spi.sv\
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/ctech_cells.sv \
"
set ::env(SYNTH_NO_FLAT) {1}
set ::env(SYNTH_READ_BLACKBOX_LIB) 1
-set ::env(VERILOG_INCLUDE_DIRS) [glob $script_dir/../../verilog/rtl/i2cm/src/includes $script_dir/../../verilog/rtl/usb1_host/src/includes ]
+set ::env(VERILOG_INCLUDE_DIRS) [glob $::env(DESIGN_DIR)/../../verilog/rtl/i2cm/src/includes $::env(DESIGN_DIR)/../../verilog/rtl/usb1_host/src/includes ]
set ::env(SYNTH_DEFINES) [list SYNTHESIS ]
-set ::env(SDC_FILE) "$script_dir/base.sdc"
-set ::env(BASE_SDC_FILE) "$script_dir/base.sdc"
+set ::env(SDC_FILE) $::env(DESIGN_DIR)/base.sdc
+set ::env(BASE_SDC_FILE) $::env(DESIGN_DIR)/base.sdc
set ::env(LEC_ENABLE) 0
@@ -91,7 +91,7 @@
set ::env(FP_PIN_ORDER_CFG) $::env(DESIGN_DIR)/pin_order.cfg
set ::env(FP_SIZING) "absolute"
-set ::env(DIE_AREA) [list 0.0 0.0 510.0 725.0]
+set ::env(DIE_AREA) [list 0.0 0.0 520.0 725.0]
@@ -117,13 +117,14 @@
#set ::env(GLB_RT_MAXLAYER) 5
set ::env(RT_MAX_LAYER) {met4}
-set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 10
+#set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 10
set ::env(DIODE_INSERTION_STRATEGY) 4
set ::env(GLB_RESIZER_TIMING_OPTIMIZATIONS) {1}
set ::env(PL_RESIZER_TIMING_OPTIMIZATIONS) {1}
-set ::env(GLB_RT_ADJUSTMENT) {0.25}
+#set ::env(GLB_RT_ADJUSTMENT) {0.25}
+set ::env(GLB_RT_LAYER_ADJUSTMENTS) {0.25,0,0,0,0,0}
set ::env(CELL_PAD) {2}
set ::env(QUIT_ON_TIMING_VIOLATIONS) "0"
diff --git a/openlane/user_project_wrapper/config.tcl b/openlane/user_project_wrapper/config.tcl
index 4598f8a..cd0740e 100644
--- a/openlane/user_project_wrapper/config.tcl
+++ b/openlane/user_project_wrapper/config.tcl
@@ -31,9 +31,9 @@
set proj_dir [file dirname [file normalize [info script]]]
set ::env(DESIGN_NAME) user_project_wrapper
-set verilog_root $proj_dir/../../verilog/
-set lef_root $proj_dir/../../lef/
-set gds_root $proj_dir/../../gds/
+set verilog_root $::env(DESIGN_DIR)/../../verilog/
+set lef_root $::env(DESIGN_DIR)/../../lef/
+set gds_root $::env(DESIGN_DIR)/../../gds/
#section end
# User Configurations
@@ -44,8 +44,8 @@
## Source Verilog Files
set ::env(VERILOG_FILES) "\
- $proj_dir/../../verilog/rtl//yifive/ycr4c/src/top/ycr4_top_wb.sv \
- $proj_dir/../../verilog/rtl/user_project_wrapper.v"
+ $::env(DESIGN_DIR)/../../verilog/rtl//yifive/ycr4c/src/top/ycr4_top_wb.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/user_project_wrapper.v"
## Clock configurations
@@ -57,27 +57,27 @@
## Internal Macros
### Macro Placement
set ::env(FP_SIZING) "absolute"
-set ::env(MACRO_PLACEMENT_CFG) $proj_dir/macro.cfg
+set ::env(MACRO_PLACEMENT_CFG) $::env(DESIGN_DIR)/macro.cfg
set ::env(PDN_CFG) $proj_dir/pdn_cfg.tcl
-set ::env(SDC_FILE) "$proj_dir/base.sdc"
-set ::env(BASE_SDC_FILE) "$proj_dir/base.sdc"
+set ::env(SDC_FILE) $::env(DESIGN_DIR)/base.sdc
+set ::env(BASE_SDC_FILE) $::env(DESIGN_DIR)/base.sdc
set ::env(SYNTH_READ_BLACKBOX_LIB) 1
### Black-box verilog and views
set ::env(VERILOG_FILES_BLACKBOX) "\
- $proj_dir/../../verilog/gl/qspim_top.v \
- $proj_dir/../../verilog/gl/wb_interconnect.v \
- $proj_dir/../../verilog/gl/pinmux.v \
- $proj_dir/../../verilog/gl/uart_i2c_usb_spi_top.v \
- $proj_dir/../../verilog/gl/wb_host.v \
- $proj_dir/../../verilog/gl/ycr_intf.v \
- $proj_dir/../../verilog/gl/ycr_core_top.v \
- $proj_dir/../../verilog/gl/ycr4_iconnect.v \
- $proj_dir/../../verilog/gl/digital_pll.v \
- $::env(PDK_ROOT)/sky130A/libs.ref/sky130_sram_macros/verilog/sky130_sram_2kbyte_1rw1r_32x512_8.v \
+ $::env(DESIGN_DIR)/../../verilog/gl/qspim_top.v \
+ $::env(DESIGN_DIR)/../../verilog/gl/wb_interconnect.v \
+ $::env(DESIGN_DIR)/../../verilog/gl/pinmux.v \
+ $::env(DESIGN_DIR)/../../verilog/gl/uart_i2c_usb_spi_top.v \
+ $::env(DESIGN_DIR)/../../verilog/gl/wb_host.v \
+ $::env(DESIGN_DIR)/../../verilog/gl/ycr_intf.v \
+ $::env(DESIGN_DIR)/../../verilog/gl/ycr_core_top.v \
+ $::env(DESIGN_DIR)/../../verilog/gl/ycr4_iconnect.v \
+ $::env(DESIGN_DIR)/../../verilog/gl/digital_pll.v \
+ $::env(PDK_ROOT)/sky130A/libs.ref/sky130_sram_macros/verilog/sky130_sram_2kbyte_1rw1r_32x512_8.v \
"
set ::env(EXTRA_LEFS) "\
@@ -108,7 +108,7 @@
set ::env(SYNTH_DEFINES) [list SYNTHESIS ]
-set ::env(VERILOG_INCLUDE_DIRS) [glob $script_dir/../../verilog/rtl/yifive/ycr4c/src/includes ]
+set ::env(VERILOG_INCLUDE_DIRS) [glob $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/includes ]
#set ::env(GLB_RT_MAXLAYER) 6
set ::env(RT_MAX_LAYER) {met5}
@@ -131,17 +131,15 @@
li1 150 130 833.1 546.54,\
met1 150 130 833.1 546.54,\
met2 150 130 833.1 546.54,\
- met3 150 130 833.1 546.54,\
-
+ met3 150 130 833.1 546.54,\
li1 950 130 1633.1 546.54,\
met1 950 130 1633.1 546.54,\
met2 950 130 1633.1 546.54,\
- met3 950 130 1633.1 546.54,\
-
- li1 150 750 833.1 1166.54,\
- met1 150 750 833.1 1166.54,\
- met2 150 750 833.1 1166.54,\
- met3 150 750 833.1 1166.54,\
+ met3 950 130 1633.1 546.54,\
+ li1 150 750 833.1 1166.54,\
+ met1 150 750 833.1 1166.54,\
+ met2 150 750 833.1 1166.54,\
+ met3 150 750 833.1 1166.54,\
met5 0 0 2920 3520"
set ::env(FP_PDN_POWER_STRAPS) "vccd1 vssd1 1, vccd2 vssd2 0, vdda1 vssa1 0, vdda2 vssa2 0"
@@ -166,6 +164,7 @@
# The following is because there are no std cells in the example wrapper project.
+set ::env(CELL_PAD) "4"
set ::env(SYNTH_TOP_LEVEL) 0
set ::env(PL_RANDOM_GLB_PLACEMENT) 1
set ::env(PL_RESIZER_DESIGN_OPTIMIZATIONS) 0
diff --git a/openlane/user_project_wrapper/macro.cfg b/openlane/user_project_wrapper/macro.cfg
index 5b5ee9b..67d04cb 100644
--- a/openlane/user_project_wrapper/macro.cfg
+++ b/openlane/user_project_wrapper/macro.cfg
@@ -1,6 +1,6 @@
u_qspi_master 2250 650 N
u_uart_i2c_usb_spi 2250 1350 N
-u_pinmux 2250 2200 N
+u_pinmux 2250 2150 N
u_riscv_top.i_core_top_0 75 1400 N
u_riscv_top.i_core_top_1 1200 1400 FN
diff --git a/openlane/user_project_wrapper/mpw5/config.tcl b/openlane/user_project_wrapper/mpw5/config.tcl
new file mode 100644
index 0000000..e2b18aa
--- /dev/null
+++ b/openlane/user_project_wrapper/mpw5/config.tcl
@@ -0,0 +1,200 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# SPDX-License-Identifier: Apache-2.0
+
+# Base Configurations. Don't Touch
+# section begin
+
+set ::env(PDK) "sky130A"
+set ::env(STD_CELL_LIBRARY) "sky130_fd_sc_hd"
+
+# YOU ARE NOT ALLOWED TO CHANGE ANY VARIABLES DEFINED IN THE FIXED WRAPPER CFGS
+source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper/fixed_wrapper_cfgs.tcl
+
+
+# YOU CAN CHANGE ANY VARIABLES DEFINED IN THE DEFAULT WRAPPER CFGS BY OVERRIDING THEM IN THIS CONFIG.TCL
+source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper/default_wrapper_cfgs.tcl
+
+
+set script_dir [file dirname [file normalize [info script]]]
+set proj_dir [file dirname [file normalize [info script]]]
+
+set ::env(DESIGN_NAME) user_project_wrapper
+set verilog_root $proj_dir/../../verilog/
+set lef_root $proj_dir/../../lef/
+set gds_root $proj_dir/../../gds/
+#section end
+
+# User Configurations
+#
+set ::env(DESIGN_IS_CORE) 1
+set ::env(FP_PDN_CORE_RING) 1
+
+
+## Source Verilog Files
+set ::env(VERILOG_FILES) "\
+ $proj_dir/../../verilog/rtl//yifive/ycr4c/src/top/ycr4_top_wb.sv \
+ $proj_dir/../../verilog/rtl/user_project_wrapper.v"
+
+
+## Clock configurations
+set ::env(CLOCK_PORT) "user_clock2 wb_clk_i"
+#set ::env(CLOCK_NET) "mprj.clk"
+
+set ::env(CLOCK_PERIOD) "10"
+
+## Internal Macros
+### Macro Placement
+set ::env(FP_SIZING) "absolute"
+set ::env(MACRO_PLACEMENT_CFG) $proj_dir/macro.cfg
+
+set ::env(PDN_CFG) $proj_dir/pdn_cfg.tcl
+
+set ::env(SDC_FILE) "$proj_dir/base.sdc"
+set ::env(BASE_SDC_FILE) "$proj_dir/base.sdc"
+
+set ::env(SYNTH_READ_BLACKBOX_LIB) 1
+
+### Black-box verilog and views
+set ::env(VERILOG_FILES_BLACKBOX) "\
+ $proj_dir/../../verilog/gl/qspim_top.v \
+ $proj_dir/../../verilog/gl/wb_interconnect.v \
+ $proj_dir/../../verilog/gl/pinmux.v \
+ $proj_dir/../../verilog/gl/uart_i2c_usb_spi_top.v \
+ $proj_dir/../../verilog/gl/wb_host.v \
+ $proj_dir/../../verilog/gl/ycr_intf.v \
+ $proj_dir/../../verilog/gl/ycr_core_top.v \
+ $proj_dir/../../verilog/gl/ycr4_iconnect.v \
+ $proj_dir/../../verilog/gl/digital_pll.v \
+ $::env(PDK_ROOT)/sky130A/libs.ref/sky130_sram_macros/verilog/sky130_sram_2kbyte_1rw1r_32x512_8.v \
+ "
+
+set ::env(EXTRA_LEFS) "\
+ $lef_root/qspim_top.lef \
+ $lef_root/pinmux.lef \
+ $lef_root/wb_interconnect.lef \
+ $lef_root/uart_i2c_usb_spi_top.lef \
+ $lef_root/wb_host.lef \
+ $lef_root/ycr_intf.lef \
+ $lef_root/ycr_core_top.lef \
+ $lef_root/ycr4_iconnect.lef \
+ $lef_root/digital_pll.lef \
+ $::env(PDK_ROOT)/sky130A/libs.ref/sky130_sram_macros/lef/sky130_sram_2kbyte_1rw1r_32x512_8.lef \
+ "
+
+set ::env(EXTRA_GDS_FILES) "\
+ $gds_root/qspim_top.gds \
+ $gds_root/pinmux.gds \
+ $gds_root/wb_interconnect.gds \
+ $gds_root/uart_i2c_usb_spi_top.gds \
+ $gds_root/wb_host.gds \
+ $gds_root/ycr_intf.gds \
+ $gds_root/ycr_core_top.gds \
+ $gds_root/ycr4_iconnect.gds \
+ $gds_root/digital_pll.gds \
+ $::env(PDK_ROOT)/sky130A/libs.ref/sky130_sram_macros/gds/sky130_sram_2kbyte_1rw1r_32x512_8.gds \
+ "
+
+set ::env(SYNTH_DEFINES) [list SYNTHESIS ]
+
+set ::env(VERILOG_INCLUDE_DIRS) [glob $script_dir/../../verilog/rtl/yifive/ycr4c/src/includes ]
+
+#set ::env(GLB_RT_MAXLAYER) 6
+set ::env(RT_MAX_LAYER) {met5}
+
+set ::env(FP_PDN_CHECK_NODES) 0
+
+
+## Internal Macros
+### Macro PDN Connections
+set ::env(FP_PDN_ENABLE_MACROS_GRID) "1"
+set ::env(FP_PDN_ENABLE_GLOBAL_CONNECTIONS) "1"
+
+set ::env(VDD_NETS) {vccd1 vccd2 vdda1 vdda2}
+set ::env(GND_NETS) {vssd1 vssd2 vssa1 vssa2}
+#
+set ::env(VDD_PIN) {vccd1}
+set ::env(GND_PIN) {vssd1}
+
+set ::env(GLB_RT_OBS) " \
+ li1 150 130 833.1 546.54,\
+ met1 150 130 833.1 546.54,\
+ met2 150 130 833.1 546.54,\
+ met3 150 130 833.1 546.54,\
+ li1 950 130 1633.1 546.54,\
+ met1 950 130 1633.1 546.54,\
+ met2 950 130 1633.1 546.54,\
+ met3 950 130 1633.1 546.54,\
+ li1 150 750 833.1 1166.54,\
+ met1 150 750 833.1 1166.54,\
+ met2 150 750 833.1 1166.54,\
+ met3 150 750 833.1 1166.54,\
+ met1 2250 2150 2800 2600,\
+ met2 2250 2150 2800 2600,\
+ met3 2250 2150 2800 2600,\
+ met1 950 650 1760 1290,\
+ met2 950 650 1760 1290,\
+ met3 950 650 1760 1290,\
+
+ met5 0 0 2920 3520"
+
+set ::env(FP_PDN_POWER_STRAPS) "vccd1 vssd1 1, vccd2 vssd2 0, vdda1 vssa1 0, vdda2 vssa2 0"
+
+#set ::env(FP_PDN_MACRO_HOOKS) " \
+# u_intercon vccd1 vssd1,\
+# u_pinmux vccd1 vssd1,\
+# u_qspi_master vccd1 vssd1,\
+# u_riscv_top vccd1 vssd1,\
+# u_tsram0_2kb vccd1 vssd1,\
+# u_icache_2kb vccd1 vssd1,\
+# u_dcache_2kb vccd1 vssd1,\
+# u_sram0_2kb vccd1 vssd1,\
+# u_sram1_2kb vccd1 vssd1,\
+# u_sram2_2kb vccd1 vssd1,\
+# u_sram3_2kb vccd1 vssd1,\
+# u_uart_i2c_usb_spi vccd1 vssd1,\
+# u_wb_host vccd1 vssd1,\
+# u_riscv_top.i_core_top_0 vccd1 vssd1, \
+# u_riscv_top.u_intf vccd1 vssd1 \
+# "
+
+
+# The following is because there are no std cells in the example wrapper project.
+set ::env(SYNTH_TOP_LEVEL) 0
+set ::env(PL_RANDOM_GLB_PLACEMENT) 1
+set ::env(PL_RESIZER_DESIGN_OPTIMIZATIONS) 0
+set ::env(PL_RESIZER_TIMING_OPTIMIZATIONS) 0
+set ::env(PL_RESIZER_BUFFER_INPUT_PORTS) 0
+set ::env(PL_RESIZER_BUFFER_OUTPUT_PORTS) 0
+set ::env(FP_PDN_ENABLE_RAILS) 0
+set ::env(DIODE_INSERTION_STRATEGY) 0
+set ::env(FILL_INSERTION) 0
+set ::env(TAP_DECAP_INSERTION) 0
+set ::env(CLOCK_TREE_SYNTH) 0
+set ::env(QUIT_ON_LVS_ERROR) "1"
+set ::env(QUIT_ON_MAGIC_DRC) "0"
+set ::env(QUIT_ON_NEGATIVE_WNS) "0"
+set ::env(QUIT_ON_SLEW_VIOLATIONS) "0"
+set ::env(QUIT_ON_TIMING_VIOLATIONS) "0"
+set ::env(FP_PDN_IRDROP) "0"
+set ::env(FP_PDN_HORIZONTAL_HALO) "10"
+set ::env(FP_PDN_VERTICAL_HALO) "10"
+set ::env(FP_PDN_VOFFSET) "5"
+set ::env(FP_PDN_VPITCH) "80"
+set ::env(FP_PDN_VSPACING) "15.5"
+set ::env(FP_PDN_VWIDTH) "3.1"
+set ::env(FP_PDN_HOFFSET) "10"
+set ::env(FP_PDN_HPITCH) "90"
+set ::env(FP_PDN_HSPACING) "10"
+set ::env(FP_PDN_HWIDTH) "3.1"
diff --git a/openlane/user_project_wrapper/mpw5/interactive.tcl b/openlane/user_project_wrapper/mpw5/interactive.tcl
new file mode 100644
index 0000000..ccfa729
--- /dev/null
+++ b/openlane/user_project_wrapper/mpw5/interactive.tcl
@@ -0,0 +1,371 @@
+#!/usr/bin/tclsh
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+# Copyright 2020 Efabless Corporation
+# Copyright 2020 Sylvain Munaut
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# SPDX-License-Identifier: Apache-2.0
+package require openlane;
+proc run_placement_step {args} {
+ if { ! [ info exists ::env(PLACEMENT_CURRENT_DEF) ] } {
+ set ::env(PLACEMENT_CURRENT_DEF) $::env(CURRENT_DEF)
+ } else {
+ set ::env(CURRENT_DEF) $::env(PLACEMENT_CURRENT_DEF)
+ }
+ run_placement
+}
+proc run_cts_step {args} {
+ if { ! [ info exists ::env(CTS_CURRENT_DEF) ] } {
+ set ::env(CTS_CURRENT_DEF) $::env(CURRENT_DEF)
+ } else {
+ set ::env(CURRENT_DEF) $::env(CTS_CURRENT_DEF)
+ }
+ run_cts
+ run_resizer_timing
+}
+proc run_routing_step {args} {
+ if { ! [ info exists ::env(ROUTING_CURRENT_DEF) ] } {
+ set ::env(ROUTING_CURRENT_DEF) $::env(CURRENT_DEF)
+ } else {
+ set ::env(CURRENT_DEF) $::env(ROUTING_CURRENT_DEF)
+ }
+ run_routing
+}
+proc run_diode_insertion_2_5_step {args} {
+ if { ! [ info exists ::env(DIODE_INSERTION_CURRENT_DEF) ] } {
+ set ::env(DIODE_INSERTION_CURRENT_DEF) $::env(CURRENT_DEF)
+ } else {
+ set ::env(CURRENT_DEF) $::env(DIODE_INSERTION_CURRENT_DEF)
+ }
+ if { ($::env(DIODE_INSERTION_STRATEGY) == 2) || ($::env(DIODE_INSERTION_STRATEGY) == 5) } {
+ run_antenna_check
+ heal_antenna_violators; # modifies the routed DEF
+ }
+}
+proc run_lvs_step {{ lvs_enabled 1 }} {
+ if { ! [ info exists ::env(LVS_CURRENT_DEF) ] } {
+ set ::env(LVS_CURRENT_DEF) $::env(CURRENT_DEF)
+ } else {
+ set ::env(CURRENT_DEF) $::env(LVS_CURRENT_DEF)
+ }
+ if { $lvs_enabled } {
+ run_magic_spice_export
+ run_lvs; # requires run_magic_spice_export
+ }
+}
+proc run_drc_step {{ drc_enabled 1 }} {
+ if { ! [ info exists ::env(DRC_CURRENT_DEF) ] } {
+ set ::env(DRC_CURRENT_DEF) $::env(CURRENT_DEF)
+ } else {
+ set ::env(CURRENT_DEF) $::env(DRC_CURRENT_DEF)
+ }
+ if { $drc_enabled } {
+ run_magic_drc
+ run_klayout_drc
+ }
+}
+proc run_antenna_check_step {{ antenna_check_enabled 1 }} {
+ if { ! [ info exists ::env(ANTENNA_CHECK_CURRENT_DEF) ] } {
+ set ::env(ANTENNA_CHECK_CURRENT_DEF) $::env(CURRENT_DEF)
+ } else {
+ set ::env(CURRENT_DEF) $::env(ANTENNA_CHECK_CURRENT_DEF)
+ }
+ if { $antenna_check_enabled } {
+ run_antenna_check
+ }
+}
+proc run_eco_step {args} {
+ if { $::env(ECO_ENABLE) == 1 } {
+ run_eco
+ }
+}
+proc save_final_views {args} {
+ set options {
+ {-save_path optional}
+ }
+ set flags {}
+ parse_key_args "save_final_views" args arg_values $options flags_map $flags
+ set arg_list [list]
+ # If they don't exist, save_views will simply not copy them
+ lappend arg_list -lef_path $::env(finishing_results)/$::env(DESIGN_NAME).lef
+ lappend arg_list -gds_path $::env(finishing_results)/$::env(DESIGN_NAME).gds
+ lappend arg_list -mag_path $::env(finishing_results)/$::env(DESIGN_NAME).mag
+ lappend arg_list -maglef_path $::env(finishing_results)/$::env(DESIGN_NAME).lef.mag
+ lappend arg_list -spice_path $::env(finishing_results)/$::env(DESIGN_NAME).spice
+
+ # Guaranteed to have default values
+ lappend arg_list -def_path $::env(CURRENT_DEF)
+ lappend arg_list -verilog_path $::env(CURRENT_NETLIST)
+ # Not guaranteed to have default values
+ if { [info exists ::env(SPEF_TYPICAL)] } {
+ lappend arg_list -spef_path $::env(SPEF_TYPICAL)
+ }
+ if { [info exists ::env(CURRENT_SDF)] } {
+ lappend arg_list -sdf_path $::env(CURRENT_SDF)
+ }
+ if { [info exists ::env(CURRENT_SDC)] } {
+ lappend arg_list -sdc_path $::env(CURRENT_SDC)
+ }
+ # Add the path if it exists...
+ if { [info exists arg_values(-save_path) ] } {
+ lappend arg_list -save_path $arg_values(-save_path)
+ }
+ # Aaand fire!
+ save_views {*}$arg_list
+}
+proc run_post_run_hooks {} {
+ if { [file exists $::env(DESIGN_DIR)/hooks/post_run.py]} {
+ puts_info "Running post run hook"
+ set result [exec $::env(OPENROAD_BIN) -python $::env(DESIGN_DIR)/hooks/post_run.py]
+ puts_info "$result"
+ } else {
+ puts_info "hooks/post_run.py not found, skipping"
+ }
+}
+proc gen_pdn {args} {
+ puts_info "Generating PDN..."
+ TIMER::timer_start
+
+ set ::env(SAVE_DEF) [index_file $::env(floorplan_tmpfiles).def]
+ set ::env(PGA_RPT_FILE) [index_file $::env(floorplan_tmpfiles).pga.rpt]
+ run_openroad_script $::env(SCRIPTS_DIR)/openroad/pdn.tcl \
+ |& -indexed_log [index_file $::env(floorplan_logs)/pdn.log]
+ TIMER::timer_stop
+ exec echo "[TIMER::get_runtime]" | python3 $::env(SCRIPTS_DIR)/write_runtime.py "pdn generation - openroad"
+ quit_on_unconnected_pdn_nodes
+ set_def $::env(SAVE_DEF)
+}
+proc run_power_grid_generation {args} {
+ if {[info exists ::env(FP_PDN_POWER_STRAPS)]} {
+ set power_domains [split $::env(FP_PDN_POWER_STRAPS) ","]
+ }
+ # internal macros power connections
+ if {[info exists ::env(FP_PDN_MACRO_HOOKS)]} {
+ set macro_hooks [dict create]
+ set pdn_hooks [split $::env(FP_PDN_MACRO_HOOKS) ","]
+ foreach pdn_hook $pdn_hooks {
+ set instance_name [lindex $pdn_hook 0]
+ set power_net [lindex $pdn_hook 1]
+ set ground_net [lindex $pdn_hook 2]
+ dict append macro_hooks $instance_name [subst {$power_net $ground_net}]
+ }
+
+ set power_net_indx [lsearch $::env(VDD_NETS) $power_net]
+ set ground_net_indx [lsearch $::env(GND_NETS) $ground_net]
+ # make sure that the specified power domains exist.
+ if { $power_net_indx == -1 || $ground_net_indx == -1 || $power_net_indx != $ground_net_indx } {
+ puts_err "Can't find $power_net and $ground_net domain. \
+ Make sure that both exist in $::env(VDD_NETS) and $::env(GND_NETS)."
+ }
+ }
+
+ # generate multiple power grids per pair of (VDD,GND)
+ # offseted by WIDTH + SPACING
+ foreach domain $power_domains {
+ set ::env(VDD_NET) [lindex $domain 0]
+ set ::env(GND_NET) [lindex $domain 1]
+ set ::env(_WITH_STRAPS) [lindex $domain 2]
+ puts_info "Connecting Power: $::env(VDD_NET) & $::env(GND_NET) to All internal macros."
+ # internal macros power connections
+ set ::env(FP_PDN_MACROS) ""
+ if { $::env(FP_PDN_ENABLE_MACROS_GRID) == 1 } {
+ # if macros connections to power are explicitly set
+ # default behavoir macro pins will be connected to the first power domain
+ if { [info exists ::env(FP_PDN_MACRO_HOOKS)] } {
+ set ::env(FP_PDN_ENABLE_MACROS_GRID) 0
+ foreach {instance_name hooks} $macro_hooks {
+ set power [lindex $hooks 0]
+ set ground [lindex $hooks 1]
+ if { $power == $::env(VDD_NET) && $ground == $::env(GND_NET) } {
+ set ::env(FP_PDN_ENABLE_MACROS_GRID) 1
+ set ::env(FP_PDN_IRDROP) "0"
+ puts_info "Connecting $instance_name to $power and $ground nets."
+ lappend ::env(FP_PDN_MACROS) $instance_name
+ }
+ }
+ }
+ } else {
+ puts_warn "All internal macros will not be connected to power $::env(VDD_NET) & $::env(GND_NET)."
+ }
+
+ gen_pdn
+ set ::env(FP_PDN_ENABLE_RAILS) 0
+ set ::env(FP_PDN_ENABLE_MACROS_GRID) 0
+ set ::env(FP_PDN_IRDROP) "0"
+ # allow failure until open_pdks is up to date...
+ catch {set ::env(FP_PDN_VOFFSET) [expr $::env(FP_PDN_VOFFSET)+$::env(FP_PDN_VWIDTH)+$::env(FP_PDN_VSPACING)]}
+ catch {set ::env(FP_PDN_HOFFSET) [expr $::env(FP_PDN_HOFFSET)+$::env(FP_PDN_HWIDTH)+$::env(FP_PDN_HSPACING)]}
+ catch {set ::env(FP_PDN_CORE_RING_VOFFSET) \
+ [expr $::env(FP_PDN_CORE_RING_VOFFSET)\
+ +2*($::env(FP_PDN_CORE_RING_VWIDTH)\
+ +max($::env(FP_PDN_CORE_RING_VSPACING), $::env(FP_PDN_CORE_RING_HSPACING)))]}
+ catch {set ::env(FP_PDN_CORE_RING_HOFFSET) [expr $::env(FP_PDN_CORE_RING_HOFFSET)\
+ +2*($::env(FP_PDN_CORE_RING_HWIDTH)+\
+ max($::env(FP_PDN_CORE_RING_VSPACING), $::env(FP_PDN_CORE_RING_HSPACING)))]}
+ puts "FP_PDN_VOFFSET: $::env(FP_PDN_VOFFSET)"
+ puts "FP_PDN_HOFFSET: $::env(FP_PDN_HOFFSET)"
+ puts "FP_PDN_CORE_RING_VOFFSET: $::env(FP_PDN_CORE_RING_VOFFSET)"
+ puts "FP_PDN_CORE_RING_HOFFSET: $::env(FP_PDN_CORE_RING_HOFFSET)"
+ }
+ set ::env(FP_PDN_ENABLE_RAILS) 1
+}
+proc run_floorplan {args} {
+ puts_info "Running Floorplanning..."
+ # |----------------------------------------------------|
+ # |---------------- 2. FLOORPLAN ------------------|
+ # |----------------------------------------------------|
+ #
+ # intial fp
+ init_floorplan
+ # check for deprecated io variables
+ if { [info exists ::env(FP_IO_HMETAL)]} {
+ set ::env(FP_IO_HLAYER) [lindex $::env(TECH_METAL_LAYERS) [expr {$::env(FP_IO_HMETAL) - 1}]]
+ puts_warn "You're using FP_IO_HMETAL in your configuration, which is a deprecated variable that will be removed in the future."
+ puts_warn "We recommend you update your configuration as follows:"
+ puts_warn "\tset ::env(FP_IO_HLAYER) {$::env(FP_IO_HLAYER)}"
+ }
+ if { [info exists ::env(FP_IO_VMETAL)]} {
+ set ::env(FP_IO_VLAYER) [lindex $::env(TECH_METAL_LAYERS) [expr {$::env(FP_IO_VMETAL) - 1}]]
+ puts_warn "You're using FP_IO_VMETAL in your configuration, which is a deprecated variable that will be removed in the future."
+ puts_warn "We recommend you update your configuration as follows:"
+ puts_warn "\tset ::env(FP_IO_VLAYER) {$::env(FP_IO_VLAYER)}"
+ }
+ # place io
+ if { [info exists ::env(FP_PIN_ORDER_CFG)] } {
+ place_io_ol
+ } else {
+ if { [info exists ::env(FP_CONTEXT_DEF)] && [info exists ::env(FP_CONTEXT_LEF)] } {
+ place_io
+ global_placement_or
+ place_contextualized_io \
+ -lef $::env(FP_CONTEXT_LEF) \
+ -def $::env(FP_CONTEXT_DEF)
+ } else {
+ place_io
+ }
+ }
+ apply_def_template
+ if { [info exist ::env(EXTRA_LEFS)] } {
+ if { [info exist ::env(MACRO_PLACEMENT_CFG)] } {
+ file copy -force $::env(MACRO_PLACEMENT_CFG) $::env(placement_tmpfiles)/macro_placement.cfg
+ manual_macro_placement f
+ } else {
+ global_placement_or
+ basic_macro_placement
+ }
+ }
+ tap_decap_or
+ scrot_klayout -layout $::env(CURRENT_DEF) $::env(floorplan_logs)/screenshot.log
+ run_power_grid_generation
+}
+proc run_flow {args} {
+ set options {
+ {-design required}
+ {-from optional}
+ {-to optional}
+ {-save_path optional}
+ {-override_env optional}
+ }
+ set flags {-save -run_hooks -no_lvs -no_drc -no_antennacheck }
+ parse_key_args "run_non_interactive_mode" args arg_values $options flags_map $flags -no_consume
+ prep {*}$args
+ # signal trap SIGINT save_state;
+ if { [info exists arg_values(-override_env)] } {
+ set env_overrides [split $arg_values(-override_env) ',']
+ foreach override $env_overrides {
+ set kva [split $override '=']
+ set key [lindex $kva 0]
+ set value [lindex $kva 1]
+ set ::env(${key}) $value
+ }
+ }
+ set LVS_ENABLED 1
+ set DRC_ENABLED 0
+ set ANTENNACHECK_ENABLED 1
+ set steps [dict create \
+ "synthesis" {run_synthesis "" } \
+ "floorplan" {run_floorplan ""} \
+ "placement" {run_placement_step ""} \
+ "cts" {run_cts_step ""} \
+ "routing" {run_routing_step ""}\
+ "eco" {run_eco_step ""} \
+ "diode_insertion" {run_diode_insertion_2_5_step ""} \
+ "gds_magic" {run_magic ""} \
+ "gds_drc_klayout" {run_klayout ""} \
+ "gds_xor_klayout" {run_klayout_gds_xor ""} \
+ "lvs" "run_lvs_step $LVS_ENABLED" \
+ "drc" "run_drc_step $DRC_ENABLED" \
+ "antenna_check" "run_antenna_check_step $ANTENNACHECK_ENABLED" \
+ "cvc" {run_lef_cvc}
+ ]
+ set_if_unset arg_values(-to) "cvc";
+ if { [info exists ::env(CURRENT_STEP) ] } {
+ puts "\[INFO\]:Picking up where last execution left off"
+ puts [format "\[INFO\]:Current stage is %s " $::env(CURRENT_STEP)]
+ } else {
+ set ::env(CURRENT_STEP) "synthesis";
+ }
+ set_if_unset arg_values(-from) $::env(CURRENT_STEP);
+ set exe 0;
+ dict for {step_name step_exe} $steps {
+ if { [ string equal $arg_values(-from) $step_name ] } {
+ set exe 1;
+ }
+ if { $exe } {
+ # For when it fails
+ set ::env(CURRENT_STEP) $step_name
+ [lindex $step_exe 0] [lindex $step_exe 1] ;
+ }
+ if { [ string equal $arg_values(-to) $step_name ] } {
+ set exe 0:
+ break;
+ }
+ }
+ # for when it resumes
+ set steps_as_list [dict keys $steps]
+ set next_idx [expr [lsearch $steps_as_list $::env(CURRENT_STEP)] + 1]
+ set ::env(CURRENT_STEP) [lindex $steps_as_list $next_idx]
+ # Saves to <RUN_DIR>/results/final
+ if { $::env(SAVE_FINAL_VIEWS) == "1" } {
+ save_final_views
+ }
+ # Saves to design directory or custom
+ if { [info exists flags_map(-save) ] } {
+ if { ! [info exists arg_values(-save_path)] } {
+ set arg_values(-save_path) $::env(DESIGN_DIR)
+ }
+ save_final_views\
+ -save_path $arg_values(-save_path)\
+ -tag $::env(RUN_TAG)
+ }
+ calc_total_runtime
+ save_state
+ generate_final_summary_report
+
+ check_timing_violations
+
+ if { [info exists arg_values(-save_path)]\
+ && $arg_values(-save_path) != "" } {
+ set ::env(HOOK_OUTPUT_PATH) "[file normalize $arg_values(-save_path)]"
+ } else {
+ set ::env(HOOK_OUTPUT_PATH) $::env(RESULTS_DIR)/final
+ }
+
+ if {[info exists flags_map(-run_hooks)]} {
+ run_post_run_hooks
+ }
+
+ puts_success "Flow complete."
+ show_warnings "Note that the following warnings have been generated:"
+}
+run_flow {*}$argv
diff --git a/openlane/user_project_wrapper/mpw5/pdn_cfg.tcl b/openlane/user_project_wrapper/mpw5/pdn_cfg.tcl
new file mode 100644
index 0000000..552a90e
--- /dev/null
+++ b/openlane/user_project_wrapper/mpw5/pdn_cfg.tcl
@@ -0,0 +1,82 @@
+# Power nets
+if { ! [info exists ::env(VDD_NET)] } {
+ set ::env(VDD_NET) $::env(VDD_PIN)
+}
+if { ! [info exists ::env(GND_NET)] } {
+ set ::env(GND_NET) $::env(GND_PIN)
+}
+set ::power_nets $::env(VDD_NET)
+set ::ground_nets $::env(GND_NET)
+if { [info exists ::env(FP_PDN_ENABLE_GLOBAL_CONNECTIONS)] } {
+ if { $::env(FP_PDN_ENABLE_GLOBAL_CONNECTIONS) == 1 } {
+ foreach power_pin $::env(STD_CELL_POWER_PINS) {
+ add_global_connection -net $::env(VDD_NET) -inst_pattern .* -pin_pattern $power_pin -power
+ }
+ foreach ground_pin $::env(STD_CELL_GROUND_PINS) {
+ add_global_connection -net $::env(GND_NET) -inst_pattern .* -pin_pattern $ground_pin -ground
+ }
+ }
+}
+set_voltage_domain -name CORE -power $::env(VDD_NET) -ground $::env(GND_NET)
+# Assesses whether the deisgn is the core of the chip or not based on the
+# value of $::env(DESIGN_IS_CORE) and uses the appropriate stdcell section
+if { $::env(DESIGN_IS_CORE) == 1 } {
+ # Used if the design is the core of the chip
+ define_pdn_grid -name stdcell_grid -starts_with POWER -voltage_domain CORE -pins [subst {$::env(FP_PDN_LOWER_LAYER) $::env(FP_PDN_UPPER_LAYER)}]
+ if { $::env(_WITH_STRAPS) } {
+ add_pdn_stripe -grid stdcell_grid -layer $::env(FP_PDN_LOWER_LAYER) -width $::env(FP_PDN_VWIDTH) -pitch $::env(FP_PDN_VPITCH) -offset $::env(FP_PDN_VOFFSET) -starts_with POWER
+ add_pdn_stripe -grid stdcell_grid -layer $::env(FP_PDN_UPPER_LAYER) -width $::env(FP_PDN_HWIDTH) -pitch $::env(FP_PDN_HPITCH) -offset $::env(FP_PDN_HOFFSET) -starts_with POWER
+ }
+ add_pdn_connect -grid stdcell_grid -layers [subst {$::env(FP_PDN_LOWER_LAYER) $::env(FP_PDN_UPPER_LAYER)}]
+} else {
+ # Used if the design is a macro in the core
+ define_pdn_grid -name stdcell_grid -starts_with POWER -voltage_domain CORE -pins $::env(FP_PDN_LOWER_LAYER)
+ add_pdn_stripe -grid stdcell_grid -layer $::env(FP_PDN_LOWER_LAYER) -width $::env(FP_PDN_VWIDTH) -pitch $::env(FP_PDN_VPITCH) -offset $::env(FP_PDN_VOFFSET) -starts_with POWER
+}
+# Adds the standard cell rails if enabled.
+if { $::env(FP_PDN_ENABLE_RAILS) == 1 } {
+ add_pdn_stripe -grid stdcell_grid -layer $::env(FP_PDN_RAILS_LAYER) -width $::env(FP_PDN_RAIL_WIDTH) -followpins -starts_with POWER
+ add_pdn_connect -grid stdcell_grid -layers [subst {$::env(FP_PDN_RAILS_LAYER) $::env(FP_PDN_LOWER_LAYER)}]
+}
+# Adds the core ring if enabled.
+if { $::env(FP_PDN_CORE_RING) == 1 } {
+ add_pdn_ring -grid stdcell_grid -layer [subst {$::env(FP_PDN_LOWER_LAYER) $::env(FP_PDN_UPPER_LAYER)}] \
+ -widths [subst {$::env(FP_PDN_CORE_RING_VWIDTH) $::env(FP_PDN_CORE_RING_HWIDTH)}] \
+ -spacings [subst {$::env(FP_PDN_CORE_RING_VSPACING) $::env(FP_PDN_CORE_RING_HSPACING)}] \
+ -core_offset [subst {$::env(FP_PDN_CORE_RING_VOFFSET) $::env(FP_PDN_CORE_RING_HOFFSET)}]
+}
+# A general macro that follows the premise of the set heirarchy. You may want to modify this or add other macro configs
+# The macro power pin names are assumed to match the VDD and GND net names
+# TODO: parameterize the power pin names
+set macro {
+ orient {R0 R180 MX MY R90 R270 MXR90 MYR90}
+ power_pins $::env(VDD_NET)
+ ground_pins $::env(GND_NET)
+ blockages $::env(MACRO_BLOCKAGES_LAYER)
+ straps {
+ }
+ connect {{$::env(FP_PDN_LOWER_LAYER)_PIN_ver $::env(FP_PDN_UPPER_LAYER)}}
+}
+if { $::env(FP_PDN_ENABLE_MACROS_GRID) == 1} {
+ if { [llength $::env(FP_PDN_MACROS)] > 0 } {
+ # generate automatically per instance:
+ foreach macro_instance $::env(FP_PDN_MACROS) {
+ set macro_instance_grid [subst $macro]
+ dict append $macro_instance_grid instance $macro_instance
+ set ::halo [list $::env(FP_PDN_HORIZONTAL_HALO) $::env(FP_PDN_VERTICAL_HALO)]
+ pdngen::specify_grid macro [subst $macro_instance_grid]
+ }
+ } else {
+ set ::halo [list $::env(FP_PDN_HORIZONTAL_HALO) $::env(FP_PDN_VERTICAL_HALO)]
+ pdngen::specify_grid macro [subst $macro]
+ }
+ # CAN NOT ENABLE THE TCL COMMAND BECAUSE THERE IS NO ARGUMENT FOR SPECIFYING THE POWER AND GROUND PIN NAMES ON THE MACRO
+ # define_pdn_grid -macro -orient {R0 R180 MX MY R90 R270 MXR90 MYR90} -grid_over_pg_pins -starts_with POWER -pin_direction vertical -halo [subst {$::env(FP_PDN_HORIZONTAL_HALO) $::env(FP_PDN_VERTICAL_HALO)}]
+ # add_pdn_connect -layers [subst {$::env(FP_PDN_LOWER_LAYER) $::env(FP_PDN_UPPER_LAYER)}]
+} else {
+ define_pdn_grid -macro -orient {R0 R180 MX MY R90 R270 MXR90 MYR90} -grid_over_pg_pins -starts_with POWER -halo [subst {$::env(FP_PDN_HORIZONTAL_HALO) $::env(FP_PDN_VERTICAL_HALO)}]
+}
+# POWER or GROUND #Std. cell rails starting with power or ground rails at the bottom of the core area
+set ::rails_start_with "POWER" ;
+# POWER or GROUND #Upper metal stripes starting with power or ground rails at the left/bottom of the core area
+set ::stripes_start_with "POWER" ;
diff --git a/openlane/user_project_wrapper/mpw6/config.tcl b/openlane/user_project_wrapper/mpw6/config.tcl
new file mode 100644
index 0000000..ec81ead
--- /dev/null
+++ b/openlane/user_project_wrapper/mpw6/config.tcl
@@ -0,0 +1,217 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# SPDX-License-Identifier: Apache-2.0
+
+# Base Configurations. Don't Touch
+# section begin
+
+set ::env(PDK) "sky130A"
+set ::env(STD_CELL_LIBRARY) "sky130_fd_sc_hd"
+
+# YOU ARE NOT ALLOWED TO CHANGE ANY VARIABLES DEFINED IN THE FIXED WRAPPER CFGS
+source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper/fixed_wrapper_cfgs.tcl
+
+
+# YOU CAN CHANGE ANY VARIABLES DEFINED IN THE DEFAULT WRAPPER CFGS BY OVERRIDING THEM IN THIS CONFIG.TCL
+source $::env(CARAVEL_ROOT)/openlane/user_project_wrapper/default_wrapper_cfgs.tcl
+
+
+set script_dir [file dirname [file normalize [info script]]]
+set proj_dir [file dirname [file normalize [info script]]]
+
+set ::env(DESIGN_NAME) user_project_wrapper
+set verilog_root $proj_dir/../../verilog/
+set lef_root $proj_dir/../../lef/
+set gds_root $proj_dir/../../gds/
+#section end
+
+# User Configurations
+#
+set ::env(DESIGN_IS_CORE) 1
+set ::env(FP_PDN_CORE_RING) 1
+
+
+## Source Verilog Files
+set ::env(VERILOG_FILES) "\
+ $proj_dir/../../verilog/rtl//yifive/ycr4c/src/top/ycr4_top_wb.sv \
+ $proj_dir/../../verilog/rtl/user_project_wrapper.v"
+
+
+## Clock configurations
+set ::env(CLOCK_PORT) "user_clock2 wb_clk_i"
+#set ::env(CLOCK_NET) "mprj.clk"
+
+set ::env(CLOCK_PERIOD) "10"
+
+## Internal Macros
+### Macro Placement
+set ::env(FP_SIZING) "absolute"
+set ::env(MACRO_PLACEMENT_CFG) $proj_dir/macro.cfg
+
+set ::env(PDN_CFG) $proj_dir/pdn_cfg.tcl
+
+set ::env(SDC_FILE) "$proj_dir/base.sdc"
+set ::env(BASE_SDC_FILE) "$proj_dir/base.sdc"
+
+set ::env(SYNTH_READ_BLACKBOX_LIB) 1
+
+### Black-box verilog and views
+set ::env(VERILOG_FILES_BLACKBOX) "\
+ $proj_dir/../../verilog/gl/qspim_top.v \
+ $proj_dir/../../verilog/gl/wb_interconnect.v \
+ $proj_dir/../../verilog/gl/pinmux.v \
+ $proj_dir/../../verilog/gl/uart_i2c_usb_spi_top.v \
+ $proj_dir/../../verilog/gl/wb_host.v \
+ $proj_dir/../../verilog/gl/ycr_intf.v \
+ $proj_dir/../../verilog/gl/ycr_core_top.v \
+ $proj_dir/../../verilog/gl/ycr4_iconnect.v \
+ $proj_dir/../../verilog/gl/digital_pll.v \
+ $::env(PDK_ROOT)/sky130A/libs.ref/sky130_sram_macros/verilog/sky130_sram_2kbyte_1rw1r_32x512_8.v \
+ "
+
+set ::env(EXTRA_LEFS) "\
+ $lef_root/qspim_top.lef \
+ $lef_root/pinmux.lef \
+ $lef_root/wb_interconnect.lef \
+ $lef_root/uart_i2c_usb_spi_top.lef \
+ $lef_root/wb_host.lef \
+ $lef_root/ycr_intf.lef \
+ $lef_root/ycr_core_top.lef \
+ $lef_root/ycr4_iconnect.lef \
+ $lef_root/digital_pll.lef \
+ $::env(PDK_ROOT)/sky130A/libs.ref/sky130_sram_macros/lef/sky130_sram_2kbyte_1rw1r_32x512_8.lef \
+ "
+
+set ::env(EXTRA_GDS_FILES) "\
+ $gds_root/qspim_top.gds \
+ $gds_root/pinmux.gds \
+ $gds_root/wb_interconnect.gds \
+ $gds_root/uart_i2c_usb_spi_top.gds \
+ $gds_root/wb_host.gds \
+ $gds_root/ycr_intf.gds \
+ $gds_root/ycr_core_top.gds \
+ $gds_root/ycr4_iconnect.gds \
+ $gds_root/digital_pll.gds \
+ $::env(PDK_ROOT)/sky130A/libs.ref/sky130_sram_macros/gds/sky130_sram_2kbyte_1rw1r_32x512_8.gds \
+ "
+
+set ::env(SYNTH_DEFINES) [list SYNTHESIS ]
+
+set ::env(VERILOG_INCLUDE_DIRS) [glob $script_dir/../../verilog/rtl/yifive/ycr4c/src/includes ]
+
+#set ::env(GLB_RT_MAXLAYER) 6
+set ::env(RT_MAX_LAYER) {met5}
+
+set ::env(FP_PDN_CHECK_NODES) 0
+
+
+## Internal Macros
+### Macro PDN Connections
+set ::env(FP_PDN_ENABLE_MACROS_GRID) "1"
+set ::env(FP_PDN_ENABLE_GLOBAL_CONNECTIONS) "1"
+
+set ::env(VDD_NETS) {vccd1 vccd2 vdda1 vdda2}
+set ::env(GND_NETS) {vssd1 vssd2 vssa1 vssa2}
+#
+set ::env(VDD_PIN) {vccd1}
+set ::env(GND_PIN) {vssd1}
+
+set ::env(GLB_RT_OBS) " \
+ li1 150 130 833.1 546.54,\
+ met1 150 130 833.1 546.54,\
+ met2 150 130 833.1 546.54,\
+ met3 150 130 833.1 546.54,\
+
+ li1 950 130 1633.1 546.54,\
+ met1 950 130 1633.1 546.54,\
+ met2 950 130 1633.1 546.54,\
+ met3 950 130 1633.1 546.54,\
+
+ li1 150 750 833.1 1166.54,\
+ met1 150 750 833.1 1166.54,\
+ met2 150 750 833.1 1166.54,\
+ met3 150 750 833.1 1166.54,\
+ met5 0 0 2920 3520"
+
+set ::env(FP_PDN_POWER_STRAPS) "vccd1 vssd1 1, vccd2 vssd2 0, vdda1 vssa1 0, vdda2 vssa2 0"
+
+set ::env(FP_PDN_MACRO_HOOKS) " \
+ u_intercon vccd1 vssd1,\
+ u_pinmux vccd1 vssd1,\
+ u_qspi_master vccd1 vssd1,\
+ u_riscv_top vccd1 vssd1,\
+ u_tsram0_2kb vccd1 vssd1,\
+ u_icache_2kb vccd1 vssd1,\
+ u_dcache_2kb vccd1 vssd1,\
+ u_sram0_2kb vccd1 vssd1,\
+ u_sram1_2kb vccd1 vssd1,\
+ u_sram2_2kb vccd1 vssd1,\
+ u_sram3_2kb vccd1 vssd1,\
+ u_uart_i2c_usb_spi vccd1 vssd1,\
+ u_wb_host vccd1 vssd1,\
+ u_riscv_top.i_core_top_0 vccd1 vssd1, \
+ u_riscv_top.i_core_top_1 vccd1 vssd1, \
+ u_riscv_top.u_intf vccd1 vssd1 \
+ "
+
+
+# The following is because there are no std cells in the example wrapper project.
+set ::env(SYNTH_TOP_LEVEL) 0
+set ::env(PL_RANDOM_GLB_PLACEMENT) 1
+
+set ::env(PL_RESIZER_DESIGN_OPTIMIZATIONS) 0
+set ::env(PL_RESIZER_TIMING_OPTIMIZATIONS) 0
+set ::env(PL_RESIZER_BUFFER_INPUT_PORTS) 0
+set ::env(PL_RESIZER_BUFFER_OUTPUT_PORTS) 0
+
+set ::env(FP_PDN_ENABLE_RAILS) 0
+
+set ::env(DIODE_INSERTION_STRATEGY) 0
+set ::env(FILL_INSERTION) 0
+set ::env(TAP_DECAP_INSERTION) 0
+set ::env(CLOCK_TREE_SYNTH) 0
+
+set ::env(QUIT_ON_LVS_ERROR) "1"
+set ::env(QUIT_ON_MAGIC_DRC) "0"
+set ::env(QUIT_ON_NEGATIVE_WNS) "0"
+set ::env(QUIT_ON_SLEW_VIOLATIONS) "0"
+set ::env(QUIT_ON_TIMING_VIOLATIONS) "0"
+
+set ::env(FP_PDN_IRDROP) "0"
+set ::env(FP_PDN_HORIZONTAL_HALO) "10"
+set ::env(FP_PDN_VERTICAL_HALO) "10"
+
+#
+
+set ::env(FP_PDN_CORE_RING_HOFFSET) {12.45}
+set ::env(FP_PDN_CORE_RING_HSPACING) {1.7}
+set ::env(FP_PDN_CORE_RING_HWIDTH) {3.1}
+
+set ::env(FP_PDN_CORE_RING_VOFFSET) {12.45}
+set ::env(FP_PDN_CORE_RING_VSPACING) {1.7}
+set ::env(FP_PDN_CORE_RING_VWIDTH) {3.1}
+
+
+set ::env(FP_PDN_VOFFSET) "5"
+set ::env(FP_PDN_VPITCH) "80"
+set ::env(FP_PDN_VSPACING) "15.5"
+set ::env(FP_PDN_VWIDTH) "3.1"
+
+set ::env(FP_PDN_HOFFSET) "10"
+set ::env(FP_PDN_HPITCH) "90"
+set ::env(FP_PDN_HSPACING) "10"
+set ::env(FP_PDN_HWIDTH) "3.1"
+
+
+
diff --git a/openlane/user_project_wrapper/mpw6/interactive.tcl b/openlane/user_project_wrapper/mpw6/interactive.tcl
new file mode 100644
index 0000000..07190b7
--- /dev/null
+++ b/openlane/user_project_wrapper/mpw6/interactive.tcl
@@ -0,0 +1,456 @@
+#!/usr/bin/tclsh
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+# Copyright 2020 Efabless Corporation
+# Copyright 2020 Sylvain Munaut
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# SPDX-License-Identifier: Apache-2.0
+
+package require openlane;
+
+proc run_placement_step {args} {
+ if { ! [ info exists ::env(PLACEMENT_CURRENT_DEF) ] } {
+ set ::env(PLACEMENT_CURRENT_DEF) $::env(CURRENT_DEF)
+ } else {
+ set ::env(CURRENT_DEF) $::env(PLACEMENT_CURRENT_DEF)
+ }
+
+ run_placement
+}
+
+proc run_cts_step {args} {
+ if { ! [ info exists ::env(CTS_CURRENT_DEF) ] } {
+ set ::env(CTS_CURRENT_DEF) $::env(CURRENT_DEF)
+ } else {
+ set ::env(CURRENT_DEF) $::env(CTS_CURRENT_DEF)
+ }
+
+ run_cts
+ run_resizer_timing
+}
+
+proc run_routing_step {args} {
+ if { ! [ info exists ::env(ROUTING_CURRENT_DEF) ] } {
+ set ::env(ROUTING_CURRENT_DEF) $::env(CURRENT_DEF)
+ } else {
+ set ::env(CURRENT_DEF) $::env(ROUTING_CURRENT_DEF)
+ }
+ run_routing
+}
+
+proc run_parasitics_sta_step {args} {
+ if { ! [ info exists ::env(PARSITICS_CURRENT_DEF) ] } {
+ set ::env(PARSITICS_CURRENT_DEF) $::env(CURRENT_DEF)
+ } else {
+ set ::env(CURRENT_DEF) $::env(PARSITICS_CURRENT_DEF)
+ }
+
+ if { $::env(RUN_SPEF_EXTRACTION) } {
+ run_parasitics_sta
+ }
+}
+
+proc run_diode_insertion_2_5_step {args} {
+ if { ! [ info exists ::env(DIODE_INSERTION_CURRENT_DEF) ] } {
+ set ::env(DIODE_INSERTION_CURRENT_DEF) $::env(CURRENT_DEF)
+ } else {
+ set ::env(CURRENT_DEF) $::env(DIODE_INSERTION_CURRENT_DEF)
+ }
+ if { ($::env(DIODE_INSERTION_STRATEGY) == 2) || ($::env(DIODE_INSERTION_STRATEGY) == 5) } {
+ run_antenna_check
+ heal_antenna_violators; # modifies the routed DEF
+ }
+
+}
+
+proc run_lvs_step {{ lvs_enabled 1 }} {
+ if { ! [ info exists ::env(LVS_CURRENT_DEF) ] } {
+ set ::env(LVS_CURRENT_DEF) $::env(CURRENT_DEF)
+ } else {
+ set ::env(CURRENT_DEF) $::env(LVS_CURRENT_DEF)
+ }
+
+ if { $lvs_enabled && $::env(RUN_LVS) } {
+ run_magic_spice_export;
+ run_lvs; # requires run_magic_spice_export
+ }
+
+}
+
+proc run_drc_step {{ drc_enabled 1 }} {
+ if { ! [ info exists ::env(DRC_CURRENT_DEF) ] } {
+ set ::env(DRC_CURRENT_DEF) $::env(CURRENT_DEF)
+ } else {
+ set ::env(CURRENT_DEF) $::env(DRC_CURRENT_DEF)
+ }
+ if { $drc_enabled } {
+ if { $::env(RUN_MAGIC_DRC) } {
+ run_magic_drc
+ }
+ if {$::env(RUN_KLAYOUT_DRC)} {
+ run_klayout_drc
+ }
+ }
+}
+
+proc run_antenna_check_step {{ antenna_check_enabled 1 }} {
+ if { ! [ info exists ::env(ANTENNA_CHECK_CURRENT_DEF) ] } {
+ set ::env(ANTENNA_CHECK_CURRENT_DEF) $::env(CURRENT_DEF)
+ } else {
+ set ::env(CURRENT_DEF) $::env(ANTENNA_CHECK_CURRENT_DEF)
+ }
+ if { $antenna_check_enabled } {
+ run_antenna_check
+ }
+}
+
+proc run_eco_step {args} {
+ if { $::env(ECO_ENABLE) == 1 } {
+ run_eco_flow
+ }
+}
+
+proc run_magic_step {args} {
+ if {$::env(RUN_MAGIC)} {
+ run_magic
+ }
+}
+
+proc run_klayout_step {args} {
+ if {$::env(RUN_KLAYOUT)} {
+ run_klayout
+ }
+ if {$::env(RUN_KLAYOUT_XOR)} {
+ run_klayout_gds_xor
+ }
+}
+
+proc save_final_views {args} {
+ set options {
+ {-save_path optional}
+ }
+ set flags {}
+ parse_key_args "save_final_views" args arg_values $options flags_map $flags
+
+ set arg_list [list]
+
+ # If they don't exist, save_views will simply not copy them
+ lappend arg_list -lef_path $::env(signoff_results)/$::env(DESIGN_NAME).lef
+ lappend arg_list -gds_path $::env(signoff_results)/$::env(DESIGN_NAME).gds
+ lappend arg_list -mag_path $::env(signoff_results)/$::env(DESIGN_NAME).mag
+ lappend arg_list -maglef_path $::env(signoff_results)/$::env(DESIGN_NAME).lef.mag
+ lappend arg_list -spice_path $::env(signoff_results)/$::env(DESIGN_NAME).spice
+
+ # Guaranteed to have default values
+ lappend arg_list -def_path $::env(CURRENT_DEF)
+ lappend arg_list -verilog_path $::env(CURRENT_NETLIST)
+
+ # Not guaranteed to have default values
+ if { [info exists ::env(CURRENT_SPEF)] } {
+ lappend arg_list -spef_path $::env(CURRENT_SPEF)
+ }
+ if { [info exists ::env(CURRENT_SDF)] } {
+ lappend arg_list -sdf_path $::env(CURRENT_SDF)
+ }
+ if { [info exists ::env(CURRENT_SDC)] } {
+ lappend arg_list -sdc_path $::env(CURRENT_SDC)
+ }
+
+ # Add the path if it exists...
+ if { [info exists arg_values(-save_path) ] } {
+ lappend arg_list -save_path $arg_values(-save_path)
+ }
+
+ # Aaand fire!
+ save_views {*}$arg_list
+
+}
+
+proc run_post_run_hooks {} {
+ if { [file exists $::env(DESIGN_DIR)/hooks/post_run.py]} {
+ puts_info "Running post run hook"
+ set result [exec $::env(OPENROAD_BIN) -python $::env(DESIGN_DIR)/hooks/post_run.py]
+ puts_info "$result"
+ } else {
+ puts_info "hooks/post_run.py not found, skipping"
+ }
+}
+
+proc gen_pdn {args} {
+ increment_index
+ TIMER::timer_start
+ puts_info "Generating PDN..."
+
+ set ::env(SAVE_DEF) [index_file $::env(floorplan_tmpfiles)/pdn.def]
+ set ::env(PGA_RPT_FILE) [index_file $::env(floorplan_tmpfiles)/pdn.pga.rpt]
+
+ run_openroad_script $::env(SCRIPTS_DIR)/openroad/pdn.tcl \
+ |& -indexed_log [index_file $::env(floorplan_logs)/pdn.log]
+
+
+ TIMER::timer_stop
+ exec echo "[TIMER::get_runtime]" | python3 $::env(SCRIPTS_DIR)/write_runtime.py "pdn generation - openroad"
+
+ quit_on_unconnected_pdn_nodes
+
+ set_def $::env(SAVE_DEF)
+}
+
+proc run_power_grid_generation {args} {
+ if { [info exists ::env(VDD_NETS)] || [info exists ::env(GND_NETS)] } {
+ # they both must exist and be equal in length
+ # current assumption: they cannot have a common ground
+ if { ! [info exists ::env(VDD_NETS)] || ! [info exists ::env(GND_NETS)] } {
+ puts_err "VDD_NETS and GND_NETS must *both* either be defined or undefined"
+ return -code error
+ }
+ # standard cell power and ground nets are assumed to be the first net
+ set ::env(VDD_PIN) [lindex $::env(VDD_NETS) 0]
+ set ::env(GND_PIN) [lindex $::env(GND_NETS) 0]
+ } elseif { [info exists ::env(SYNTH_USE_PG_PINS_DEFINES)] } {
+ set ::env(VDD_NETS) [list]
+ set ::env(GND_NETS) [list]
+ # get the pins that are in $synthesis_tmpfiles.pg_define.v
+ # that are not in $synthesis_results.v
+ #
+ set full_pins {*}[extract_pins_from_yosys_netlist $::env(synthesis_tmpfiles)/pg_define.v]
+ puts_info $full_pins
+
+ set non_pg_pins {*}[extract_pins_from_yosys_netlist $::env(synthesis_results)/$::env(DESIGN_NAME).v]
+ puts_info $non_pg_pins
+
+ # assumes the pins are ordered correctly (e.g., vdd1, vss1, vcc1, vss1, ...)
+ foreach {vdd gnd} $full_pins {
+ if { $vdd ne "" && $vdd ni $non_pg_pins } {
+ lappend ::env(VDD_NETS) $vdd
+ }
+ if { $gnd ne "" && $gnd ni $non_pg_pins } {
+ lappend ::env(GND_NETS) $gnd
+ }
+ }
+ } else {
+ set ::env(VDD_NETS) $::env(VDD_PIN)
+ set ::env(GND_NETS) $::env(GND_PIN)
+ }
+
+ puts_info "Power planning with power {$::env(VDD_NETS)} and ground {$::env(GND_NETS)}..."
+
+ if { [llength $::env(VDD_NETS)] != [llength $::env(GND_NETS)] } {
+ puts_err "VDD_NETS and GND_NETS must be of equal lengths"
+ return -code error
+ }
+
+ # check internal macros' power connection definitions
+ if {[info exists ::env(FP_PDN_MACRO_HOOKS)]} {
+ set macro_hooks [dict create]
+ set pdn_hooks [split $::env(FP_PDN_MACRO_HOOKS) ","]
+ foreach pdn_hook $pdn_hooks {
+ set instance_name [lindex $pdn_hook 0]
+ set power_net [lindex $pdn_hook 1]
+ set ground_net [lindex $pdn_hook 2]
+ dict append macro_hooks $instance_name [subst {$power_net $ground_net}]
+ }
+
+ set power_net_indx [lsearch $::env(VDD_NETS) $power_net]
+ set ground_net_indx [lsearch $::env(GND_NETS) $ground_net]
+
+ # make sure that the specified power domains exist.
+ if { $power_net_indx == -1 || $ground_net_indx == -1 || $power_net_indx != $ground_net_indx } {
+ puts_err "Can't find $power_net and $ground_net domain. \
+ Make sure that both exist in $::env(VDD_NETS) and $::env(GND_NETS)."
+ }
+ }
+
+ gen_pdn
+}
+
+proc run_floorplan {args} {
+ puts_info "Running Floorplanning..."
+ # |----------------------------------------------------|
+ # |---------------- 2. FLOORPLAN ------------------|
+ # |----------------------------------------------------|
+ #
+ # intial fp
+ init_floorplan
+
+ # check for deprecated io variables
+ if { [info exists ::env(FP_IO_HMETAL)]} {
+ set ::env(FP_IO_HLAYER) [lindex $::env(TECH_METAL_LAYERS) [expr {$::env(FP_IO_HMETAL) - 1}]]
+ puts_warn "You're using FP_IO_HMETAL in your configuration, which is a deprecated variable that will be removed in the future."
+ puts_warn "We recommend you update your configuration as follows:"
+ puts_warn "\tset ::env(FP_IO_HLAYER) {$::env(FP_IO_HLAYER)}"
+ }
+
+ if { [info exists ::env(FP_IO_VMETAL)]} {
+ set ::env(FP_IO_VLAYER) [lindex $::env(TECH_METAL_LAYERS) [expr {$::env(FP_IO_VMETAL) - 1}]]
+ puts_warn "You're using FP_IO_VMETAL in your configuration, which is a deprecated variable that will be removed in the future."
+ puts_warn "We recommend you update your configuration as follows:"
+ puts_warn "\tset ::env(FP_IO_VLAYER) {$::env(FP_IO_VLAYER)}"
+ }
+
+
+ # place io
+ if { [info exists ::env(FP_PIN_ORDER_CFG)] } {
+ place_io_ol
+ } else {
+ if { [info exists ::env(FP_CONTEXT_DEF)] && [info exists ::env(FP_CONTEXT_LEF)] } {
+ place_io
+ global_placement_or
+ place_contextualized_io \
+ -lef $::env(FP_CONTEXT_LEF) \
+ -def $::env(FP_CONTEXT_DEF)
+ } else {
+ place_io
+ }
+ }
+
+ apply_def_template
+
+ if { [info exist ::env(EXTRA_LEFS)] } {
+ if { [info exist ::env(MACRO_PLACEMENT_CFG)] } {
+ file copy -force $::env(MACRO_PLACEMENT_CFG) $::env(placement_tmpfiles)/macro_placement.cfg
+ manual_macro_placement f
+ } else {
+ global_placement_or
+ basic_macro_placement
+ }
+ }
+
+ tap_decap_or
+
+ scrot_klayout -layout $::env(CURRENT_DEF) $::env(floorplan_logs)/screenshot.log
+
+ run_power_grid_generation
+}
+
+
+proc run_flow {args} {
+ set options {
+ {-design required}
+ {-from optional}
+ {-to optional}
+ {-save_path optional}
+ {-override_env optional}
+ }
+ set flags {-save -run_hooks -no_lvs -no_drc -no_antennacheck }
+ parse_key_args "run_non_interactive_mode" args arg_values $options flags_map $flags -no_consume
+ prep {*}$args
+ # signal trap SIGINT save_state;
+
+ if { [info exists flags_map(-gui)] } {
+ or_gui
+ return
+ }
+ if { [info exists arg_values(-override_env)] } {
+ set env_overrides [split $arg_values(-override_env) ',']
+ foreach override $env_overrides {
+ set kva [split $override '=']
+ set key [lindex $kva 0]
+ set value [lindex $kva 1]
+ set ::env(${key}) $value
+ }
+ }
+
+ set LVS_ENABLED 1
+ set DRC_ENABLED 0
+ set ANTENNACHECK_ENABLED 1
+
+ set steps [dict create \
+ "synthesis" "run_synthesis" \
+ "floorplan" "run_floorplan" \
+ "placement" "run_placement_step" \
+ "cts" "run_cts_step" \
+ "routing" "run_routing_step" \
+ "parasitics_sta" "run_parasitics_sta_step" \
+ "eco" "run_eco_step" \
+ "diode_insertion" "run_diode_insertion_2_5_step" \
+ "gds_magic" "run_magic_step" \
+ "gds_klayout" "run_klayout_step" \
+ "lvs" "run_lvs_step $LVS_ENABLED " \
+ "drc" "run_drc_step $DRC_ENABLED " \
+ "antenna_check" "run_antenna_check_step $ANTENNACHECK_ENABLED " \
+ "cvc" "run_lef_cvc"
+ ]
+
+ set_if_unset arg_values(-to) "cvc";
+
+ if { [info exists ::env(CURRENT_STEP) ] } {
+ puts "\[INFO\]:Picking up where last execution left off"
+ puts [format "\[INFO\]:Current stage is %s " $::env(CURRENT_STEP)]
+ } else {
+ set ::env(CURRENT_STEP) "synthesis";
+ }
+
+ set_if_unset arg_values(-from) $::env(CURRENT_STEP);
+ set exe 0;
+ dict for {step_name step_exe} $steps {
+ if { [ string equal $arg_values(-from) $step_name ] } {
+ set exe 1;
+ }
+
+ if { $exe } {
+ # For when it fails
+ set ::env(CURRENT_STEP) $step_name
+ [lindex $step_exe 0] [lindex $step_exe 1] ;
+ }
+
+ if { [ string equal $arg_values(-to) $step_name ] } {
+ set exe 0:
+ break;
+ }
+
+ }
+
+ # for when it resumes
+ set steps_as_list [dict keys $steps]
+ set next_idx [expr [lsearch $steps_as_list $::env(CURRENT_STEP)] + 1]
+ set ::env(CURRENT_STEP) [lindex $steps_as_list $next_idx]
+
+ # Saves to <RUN_DIR>/results/final
+ if { $::env(SAVE_FINAL_VIEWS) == "1" } {
+ save_final_views
+ }
+
+ # Saves to design directory or custom
+ if { [info exists flags_map(-save) ] } {
+ if { ! [info exists arg_values(-save_path)] } {
+ set arg_values(-save_path) $::env(DESIGN_DIR)
+ }
+ save_final_views\
+ -save_path $arg_values(-save_path)\
+ -tag $::env(RUN_TAG)
+ }
+ calc_total_runtime
+ save_state
+ generate_final_summary_report
+
+ check_timing_violations
+
+ if { [info exists arg_values(-save_path)]\
+ && $arg_values(-save_path) != "" } {
+ set ::env(HOOK_OUTPUT_PATH) "[file normalize $arg_values(-save_path)]"
+ } else {
+ set ::env(HOOK_OUTPUT_PATH) $::env(RESULTS_DIR)/final
+ }
+
+ if {[info exists flags_map(-run_hooks)]} {
+ run_post_run_hooks
+ }
+
+ puts_success "Flow complete."
+
+ show_warnings "Note that the following warnings have been generated:"
+
+}
+
+run_flow {*}$argv
diff --git a/openlane/user_project_wrapper/mpw6/pdn_cfg.tcl b/openlane/user_project_wrapper/mpw6/pdn_cfg.tcl
new file mode 100644
index 0000000..1bd5f1e
--- /dev/null
+++ b/openlane/user_project_wrapper/mpw6/pdn_cfg.tcl
@@ -0,0 +1,165 @@
+# Power nets
+
+if { ! [info exists ::env(VDD_NET)] } {
+ set ::env(VDD_NET) $::env(VDD_PIN)
+}
+
+if { ! [info exists ::env(GND_NET)] } {
+ set ::env(GND_NET) $::env(GND_PIN)
+}
+
+if { [info exists ::env(FP_PDN_ENABLE_GLOBAL_CONNECTIONS)] } {
+ if { $::env(FP_PDN_ENABLE_GLOBAL_CONNECTIONS) == 1 } {
+ foreach power_pin $::env(STD_CELL_POWER_PINS) {
+ add_global_connection \
+ -net $::env(VDD_NET) \
+ -inst_pattern .* \
+ -pin_pattern $power_pin \
+ -power
+ }
+ foreach ground_pin $::env(STD_CELL_GROUND_PINS) {
+ add_global_connection \
+ -net $::env(GND_NET) \
+ -inst_pattern .* \
+ -pin_pattern $ground_pin \
+ -ground
+ }
+ }
+}
+
+if { $::env(FP_PDN_ENABLE_MACROS_GRID) == 1 &&
+ [info exists ::env(FP_PDN_MACRO_HOOKS)]} {
+ set pdn_hooks [split $::env(FP_PDN_MACRO_HOOKS) ","]
+ foreach pdn_hook $pdn_hooks {
+ set instance_name [lindex $pdn_hook 0]
+ set power_net [lindex $pdn_hook 1]
+ set ground_net [lindex $pdn_hook 2]
+ # This assumes the power pin and the power net have the same name.
+ # The macro hooks only give an instance name and not power pin names.
+
+ add_global_connection \
+ -net $power_net \
+ -inst_pattern $instance_name \
+ -pin_pattern $power_net \
+ -power
+
+ add_global_connection \
+ -net $ground_net \
+ -inst_pattern $instance_name \
+ -pin_pattern $ground_net \
+ -ground
+ }
+}
+
+set secondary []
+
+foreach vdd $::env(VDD_NETS) gnd $::env(GND_NETS) {
+ if { $vdd != $::env(VDD_NET)} {
+ lappend secondary $vdd
+
+ set db_net [[ord::get_db_block] findNet $vdd]
+ if {$db_net == "NULL"} {
+ set net [odb::dbNet_create [ord::get_db_block] $vdd]
+ $net setSpecial
+ $net setSigType "POWER"
+ }
+ }
+
+ if { $gnd != $::env(GND_NET)} {
+ lappend secondary $gnd
+
+ set db_net [[ord::get_db_block] findNet $gnd]
+ if {$db_net == "NULL"} {
+ set net [odb::dbNet_create [ord::get_db_block] $gnd]
+ $net setSpecial
+ $net setSigType "GROUND"
+ }
+ }
+}
+
+set_voltage_domain -name CORE -power $::env(VDD_NET) -ground $::env(GND_NET) \
+ -secondary_power $secondary
+
+# Assesses whether the design is the core of the chip or not based on the
+# value of $::env(DESIGN_IS_CORE) and uses the appropriate stdcell section
+if { $::env(DESIGN_IS_CORE) == 1 } {
+ # Used if the design is the core of the chip
+ define_pdn_grid \
+ -name stdcell_grid \
+ -starts_with POWER \
+ -voltage_domain CORE \
+ -pins "$::env(FP_PDN_LOWER_LAYER) $::env(FP_PDN_UPPER_LAYER)"
+
+ add_pdn_stripe \
+ -grid stdcell_grid \
+ -layer $::env(FP_PDN_LOWER_LAYER) \
+ -width $::env(FP_PDN_VWIDTH) \
+ -pitch $::env(FP_PDN_VPITCH) \
+ -offset $::env(FP_PDN_VOFFSET) \
+ -nets "$::env(VDD_NET) $::env(GND_NET)" \
+ -starts_with POWER -extend_to_core_ring
+
+ add_pdn_stripe \
+ -grid stdcell_grid \
+ -layer $::env(FP_PDN_UPPER_LAYER) \
+ -width $::env(FP_PDN_HWIDTH) \
+ -pitch $::env(FP_PDN_HPITCH) \
+ -offset $::env(FP_PDN_HOFFSET) \
+ -nets "$::env(VDD_NET) $::env(GND_NET)" \
+ -starts_with POWER -extend_to_core_ring
+
+ add_pdn_connect \
+ -grid stdcell_grid \
+ -layers "$::env(FP_PDN_LOWER_LAYER) $::env(FP_PDN_UPPER_LAYER)"
+} else {
+ # Used if the design is a macro in the core
+ define_pdn_grid \
+ -name stdcell_grid \
+ -starts_with POWER \
+ -voltage_domain CORE \
+ -pins $::env(FP_PDN_LOWER_LAYER)
+
+ add_pdn_stripe \
+ -grid stdcell_grid \
+ -layer $::env(FP_PDN_LOWER_LAYER) \
+ -width $::env(FP_PDN_VWIDTH) \
+ -pitch $::env(FP_PDN_VPITCH) \
+ -offset $::env(FP_PDN_VOFFSET) \
+ -starts_with POWER
+}
+
+# Adds the standard cell rails if enabled.
+if { $::env(FP_PDN_ENABLE_RAILS) == 1 } {
+ add_pdn_stripe \
+ -grid stdcell_grid \
+ -layer $::env(FP_PDN_RAILS_LAYER) \
+ -width $::env(FP_PDN_RAIL_WIDTH) \
+ -followpins \
+ -starts_with POWER
+
+ add_pdn_connect \
+ -grid stdcell_grid \
+ -layers "$::env(FP_PDN_RAILS_LAYER) $::env(FP_PDN_LOWER_LAYER)"
+}
+
+
+# Adds the core ring if enabled.
+if { $::env(FP_PDN_CORE_RING) == 1 } {
+ add_pdn_ring \
+ -grid stdcell_grid \
+ -layers "$::env(FP_PDN_LOWER_LAYER) $::env(FP_PDN_UPPER_LAYER)" \
+ -widths "$::env(FP_PDN_CORE_RING_VWIDTH) $::env(FP_PDN_CORE_RING_HWIDTH)" \
+ -spacings "$::env(FP_PDN_CORE_RING_VSPACING) $::env(FP_PDN_CORE_RING_HSPACING)" \
+ -core_offset "$::env(FP_PDN_CORE_RING_VOFFSET) $::env(FP_PDN_CORE_RING_HOFFSET)"
+}
+
+define_pdn_grid \
+ -macro \
+ -default \
+ -name macro \
+ -starts_with POWER \
+ -halo "$::env(FP_PDN_HORIZONTAL_HALO) $::env(FP_PDN_VERTICAL_HALO)"
+
+add_pdn_connect \
+ -grid macro \
+ -layers "$::env(FP_PDN_LOWER_LAYER) $::env(FP_PDN_UPPER_LAYER)"
diff --git a/openlane/wb_host/config.tcl b/openlane/wb_host/config.tcl
index 4b29f05..527f4cc 100755
--- a/openlane/wb_host/config.tcl
+++ b/openlane/wb_host/config.tcl
@@ -40,31 +40,31 @@
# Local sources + no2usb sources
set ::env(VERILOG_FILES) "\
- $script_dir/../../verilog/rtl/clk_skew_adjust/src/clk_skew_adjust.gv \
- $script_dir/../../verilog/rtl/wb_host/src/wb_host.sv \
- $script_dir/../../verilog/rtl/lib/async_fifo.sv \
- $script_dir/../../verilog/rtl/lib/async_wb.sv \
- $script_dir/../../verilog/rtl/lib/clk_ctl.v \
- $script_dir/../../verilog/rtl/lib/ctech_cells.sv \
- $script_dir/../../verilog/rtl/lib/registers.v \
- $script_dir/../../verilog/rtl/lib/reset_sync.sv \
- $script_dir/../../verilog/rtl/lib/async_reg_bus.sv \
- $script_dir/../../verilog/rtl/uart/src/uart_txfsm.sv \
- $script_dir/../../verilog/rtl/uart/src/uart_rxfsm.sv \
- $script_dir/../../verilog/rtl/lib/double_sync_low.v \
- $script_dir/../../verilog/rtl/wb_interconnect/src/wb_arb.sv \
- $script_dir/../../verilog/rtl/uart2wb/src/uart2wb.sv \
- $script_dir/../../verilog/rtl/uart2wb/src/uart2_core.sv \
- $script_dir/../../verilog/rtl/uart2wb/src/uart_msg_handler.v \
- $script_dir/../../verilog/rtl/sspis/src/sspis_top.sv \
- $script_dir/../../verilog/rtl/sspis/src/sspis_if.sv \
- $script_dir/../../verilog/rtl/sspis/src/spi2wb.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/clk_skew_adjust/src/clk_skew_adjust.gv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/wb_host/src/wb_host.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/async_fifo.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/async_wb.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/clk_ctl.v \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/ctech_cells.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/registers.v \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/reset_sync.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/async_reg_bus.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/uart/src/uart_txfsm.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/uart/src/uart_rxfsm.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/double_sync_low.v \
+ $::env(DESIGN_DIR)/../../verilog/rtl/wb_interconnect/src/wb_arb.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/uart2wb/src/uart2wb.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/uart2wb/src/uart2_core.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/uart2wb/src/uart_msg_handler.v \
+ $::env(DESIGN_DIR)/../../verilog/rtl/sspis/src/sspis_top.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/sspis/src/sspis_if.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/sspis/src/spi2wb.sv \
"
set ::env(SYNTH_READ_BLACKBOX_LIB) 1
set ::env(SYNTH_DEFINES) [list SYNTHESIS ]
-set ::env(SDC_FILE) "$script_dir/base.sdc"
-set ::env(BASE_SDC_FILE) "$script_dir/base.sdc"
+set ::env(SDC_FILE) $::env(DESIGN_DIR)/base.sdc
+set ::env(BASE_SDC_FILE) $::env(DESIGN_DIR)/base.sdc
set ::env(LEC_ENABLE) 0
@@ -102,7 +102,7 @@
#set ::env(GLB_RT_MAXLAYER) 5
set ::env(RT_MAX_LAYER) {met4}
-set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 10
+#set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 10
set ::env(DIODE_INSERTION_STRATEGY) 4
diff --git a/openlane/wb_interconnect/base.sdc b/openlane/wb_interconnect/base.sdc
index d815c04..d4e6271 100644
--- a/openlane/wb_interconnect/base.sdc
+++ b/openlane/wb_interconnect/base.sdc
@@ -9,7 +9,7 @@
create_clock -name clk_i -period 10.0000 [get_ports {clk_i}]
set_clock_transition 0.1500 [all_clocks]
-set_clock_uncertainty -setup 0.2500 [all_clocks]
+set_clock_uncertainty -setup 0.5000 [all_clocks]
set_clock_uncertainty -hold 0.2500 [all_clocks]
#Clock Skew adjustment
diff --git a/openlane/wb_interconnect/config.tcl b/openlane/wb_interconnect/config.tcl
index 55b38f4..c58574a 100755
--- a/openlane/wb_interconnect/config.tcl
+++ b/openlane/wb_interconnect/config.tcl
@@ -40,23 +40,23 @@
# Local sources + no2usb sources
set ::env(VERILOG_FILES) "\
- $script_dir/../../verilog/rtl/clk_skew_adjust/src/clk_skew_adjust.gv \
- $script_dir/../../verilog/rtl/lib/sync_wbb.sv \
- $script_dir/../../verilog/rtl/lib/sync_fifo2.sv \
- $script_dir/../../verilog/rtl/wb_interconnect/src/wb_arb.sv \
- $script_dir/../../verilog/rtl/wb_interconnect/src/wb_slave_port.sv \
- $script_dir/../../verilog/rtl/wb_interconnect/src/wb_interconnect.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/clk_skew_adjust/src/clk_skew_adjust.gv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/sync_wbb.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/sync_fifo2.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/wb_interconnect/src/wb_arb.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/wb_interconnect/src/wb_slave_port.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/wb_interconnect/src/wb_interconnect.sv \
"
set ::env(SYNTH_DEFINES) [list SYNTHESIS ]
-set ::env(SYNTH_PARAMS) "CH_CLK_WD 4,\
- CH_DATA_WD 37 \
+set ::env(SYNTH_PARAMETERS) "CH_CLK_WD=4\
+ CH_DATA_WD=37 \
"
set ::env(SYNTH_READ_BLACKBOX_LIB) 1
-set ::env(SDC_FILE) "$script_dir/base.sdc"
-set ::env(BASE_SDC_FILE) "$script_dir/base.sdc"
+set ::env(SDC_FILE) $::env(DESIGN_DIR)/base.sdc
+set ::env(BASE_SDC_FILE) $::env(DESIGN_DIR)/base.sdc
set ::env(LEC_ENABLE) 0
@@ -88,7 +88,7 @@
set ::env(USE_ARC_ANTENNA_CHECK) "0"
-set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 10
+#set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 10
set ::env(DIODE_INSERTION_STRATEGY) 4
## CTS
@@ -104,14 +104,17 @@
set ::env(PL_RESIZER_MAX_CAP_MARGIN) 2
## Routing
-set ::env(GLB_RT_ADJUSTMENT) 0
-set ::env(GLB_RT_L2_ADJUSTMENT) 0.21
-set ::env(GLB_RT_L3_ADJUSTMENT) 0.21
-set ::env(GLB_RT_L4_ADJUSTMENT) 0.1
-set ::env(GLB_RT_L5_ADJUSTMENT) 0.1
-set ::env(GLB_RT_L6_ADJUSTMENT) 0.1
-set ::env(GLB_RT_ALLOW_CONGESTION) 0
-set ::env(GLB_RT_OVERFLOW_ITERS) 200
+set ::env(GRT_ADJUSTMENT) 0.1
+set ::env(DPL_CELL_PADDING) 1
+
+#set ::env(GLB_RT_ADJUSTMENT) 0
+#set ::env(GLB_RT_L2_ADJUSTMENT) 0.21
+#set ::env(GLB_RT_L3_ADJUSTMENT) 0.21
+#set ::env(GLB_RT_L4_ADJUSTMENT) 0.1
+#set ::env(GLB_RT_L5_ADJUSTMENT) 0.1
+#set ::env(GLB_RT_L6_ADJUSTMENT) 0.1
+#set ::env(GLB_RT_ALLOW_CONGESTION) 0
+#set ::env(GLB_RT_OVERFLOW_ITERS) 200
#set ::env(GLB_RT_MAXLAYER) 5
set ::env(RT_MAX_LAYER) {met4}
diff --git a/openlane/ycr4_iconnect/config.tcl b/openlane/ycr4_iconnect/config.tcl
index a4afaf5..6d9057d 100644
--- a/openlane/ycr4_iconnect/config.tcl
+++ b/openlane/ycr4_iconnect/config.tcl
@@ -34,40 +34,38 @@
set ::env(LEC_ENABLE) 0
set ::env(VERILOG_FILES) "\
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/top/ycr4_iconnect.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/top/ycr4_cross_bar.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/top/ycr4_router.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/top/ycr_dmem_router.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/top/ycr_sram_mux.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/top/ycr_tcm.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/top/ycr_timer.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/top/ycr_req_retiming.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/lib/ycr_arb.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/lib/ctech_cells.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/lib/sync_fifo2.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/primitives/ycr_reset_cells.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/top/ycr4_iconnect.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/top/ycr4_cross_bar.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/top/ycr4_router.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/top/ycr_dmem_router.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/top/ycr_sram_mux.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/top/ycr_tcm.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/top/ycr_timer.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/top/ycr_req_retiming.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/lib/ycr_arb.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/lib/ctech_cells.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/lib/sync_fifo2.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/primitives/ycr_reset_cells.sv \
"
-set ::env(VERILOG_INCLUDE_DIRS) [glob $script_dir/../../verilog/rtl/yifive/ycr4c/src/includes ]
+set ::env(VERILOG_INCLUDE_DIRS) [glob $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/includes ]
set ::env(SYNTH_READ_BLACKBOX_LIB) 1
set ::env(SYNTH_DEFINES) [list SYNTHESIS ]
-set ::env(SDC_FILE) "$script_dir/base.sdc"
-set ::env(BASE_SDC_FILE) "$script_dir/base.sdc"
+set ::env(SDC_FILE) $::env(DESIGN_DIR)/base.sdc
+set ::env(BASE_SDC_FILE) $::env(DESIGN_DIR)/base.sdc
set ::env(LEC_ENABLE) 0
## Floorplan
-set ::env(FP_PIN_ORDER_CFG) $script_dir/pin_order.cfg
+set ::env(FP_PIN_ORDER_CFG) $::env(DESIGN_DIR)/pin_order.cfg
set ::env(FP_SIZING) absolute
set ::env(DIE_AREA) "0 0 390 1900"
-#set ::env(PDN_CFG) $script_dir/pdn_cfg.tcl
-#set ::env(MACRO_PLACEMENT_CFG) $script_dir/macro_placement.cfg
set ::env(PL_TARGET_DENSITY) 0.20
set ::env(CELL_PAD) "2"
-set ::env(GLB_RT_ADJUSTMENT) {0.2}
+#set ::env(GLB_RT_ADJUSTMENT) {0.2}
#set ::env(PL_ROUTABILITY_DRIVEN) "1"
set ::env(PL_TIME_DRIVEN) "1"
@@ -97,7 +95,7 @@
#set ::env(GLB_RT_MAXLAYER) 5
set ::env(RT_MAX_LAYER) {met4}
-set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 20
+#set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 20
set ::env(DIODE_INSERTION_STRATEGY) 3
diff --git a/openlane/ycr_core_top/config.tcl b/openlane/ycr_core_top/config.tcl
index 6be1e18..31262eb 100644
--- a/openlane/ycr_core_top/config.tcl
+++ b/openlane/ycr_core_top/config.tcl
@@ -33,38 +33,38 @@
set ::env(LEC_ENABLE) 0
set ::env(VERILOG_FILES) "\
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_top.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/ycr_core_top.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/ycr_dm.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/ycr_tapc_synchronizer.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/ycr_clk_ctrl.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/ycr_scu.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/ycr_tapc.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/ycr_tapc_shift_reg.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/ycr_dmi.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/primitives/ycr_reset_cells.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_ifu.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_idu.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_exu.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_mprf.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_csr.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_ialu.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_mul.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_div.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_lsu.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_hdu.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_tdu.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_ipic.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/top/ycr_req_retiming.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/lib/sync_fifo2.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_top.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/ycr_core_top.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/ycr_dm.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/ycr_tapc_synchronizer.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/ycr_clk_ctrl.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/ycr_scu.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/ycr_tapc.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/ycr_tapc_shift_reg.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/ycr_dmi.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/primitives/ycr_reset_cells.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_ifu.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_idu.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_exu.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_mprf.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_csr.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_ialu.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_mul.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_div.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_lsu.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_hdu.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_pipe_tdu.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/pipeline/ycr_ipic.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/top/ycr_req_retiming.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/lib/sync_fifo2.sv \
"
-set ::env(VERILOG_INCLUDE_DIRS) [glob $script_dir/../../verilog/rtl/yifive/ycr4c/src/includes ]
+set ::env(VERILOG_INCLUDE_DIRS) [glob $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/includes ]
set ::env(SYNTH_READ_BLACKBOX_LIB) 1
set ::env(SYNTH_DEFINES) [list SYNTHESIS ]
-set ::env(SDC_FILE) "$script_dir/base.sdc"
-set ::env(BASE_SDC_FILE) "$script_dir/base.sdc"
+set ::env(SDC_FILE) $::env(DESIGN_DIR)/base.sdc
+set ::env(BASE_SDC_FILE) $::env(DESIGN_DIR)/base.sdc
set ::env(LEC_ENABLE) 0
@@ -72,17 +72,16 @@
set ::env(GND_PIN) [list {vssd1}]
## Floorplan
-set ::env(FP_PIN_ORDER_CFG) $script_dir/pin_order.cfg
+set ::env(FP_PIN_ORDER_CFG) $::env(DESIGN_DIR)/pin_order.cfg
set ::env(FP_SIZING) absolute
set ::env(DIE_AREA) "0 0 540 950 "
-set ::env(MACRO_PLACEMENT_CFG) $script_dir/macro_placement.cfg
set ::env(PL_TARGET_DENSITY) 0.43
set ::env(CELL_PAD) "4"
#set ::env(GLB_RT_MAXLAYER) 5
set ::env(RT_MAX_LAYER) {met4}
-set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 10
+#set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 10
set ::env(DIODE_INSERTION_STRATEGY) 3
diff --git a/openlane/ycr_core_top/macro_placement.cfg b/openlane/ycr_core_top/macro_placement.cfg
index 8ec6301..e69de29 100644
--- a/openlane/ycr_core_top/macro_placement.cfg
+++ b/openlane/ycr_core_top/macro_placement.cfg
@@ -1,2 +0,0 @@
-u_icache.u_cmem_2kb 285.000 291.000 FS
-u_dcache.u_cmem_2kb 1185.000 291.000 N
diff --git a/openlane/ycr_intf/config.tcl b/openlane/ycr_intf/config.tcl
index 92f8034..814e2b0 100644
--- a/openlane/ycr_intf/config.tcl
+++ b/openlane/ycr_intf/config.tcl
@@ -34,27 +34,27 @@
set ::env(LEC_ENABLE) 0
set ::env(VERILOG_FILES) "\
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/lib/clk_skew_adjust.gv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/lib/ctech_cells.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/cache/src/core/dcache_top.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/cache/src/core/dcache_tag_fifo.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/cache/src/core/icache_tag_fifo.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/cache/src/core/icache_top.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/cache/src/core/icache_app_fsm.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/lib/ycr_async_wbb.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/top/ycr_dmem_wb.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/top/ycr_intf.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/top/ycr_sram_mux.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/lib/async_fifo.sv \
- $script_dir/../../verilog/rtl/yifive/ycr4c/src/core/primitives/ycr_reset_cells.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/lib/clk_skew_adjust.gv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/lib/ctech_cells.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/cache/src/core/dcache_top.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/cache/src/core/dcache_tag_fifo.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/cache/src/core/icache_tag_fifo.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/cache/src/core/icache_top.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/cache/src/core/icache_app_fsm.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/lib/ycr_async_wbb.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/top/ycr_dmem_wb.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/top/ycr_intf.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/top/ycr_sram_mux.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/lib/async_fifo.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/core/primitives/ycr_reset_cells.sv \
"
-set ::env(VERILOG_INCLUDE_DIRS) [glob $script_dir/../../verilog/rtl/yifive/ycr4c/src/includes ]
+set ::env(VERILOG_INCLUDE_DIRS) [glob $::env(DESIGN_DIR)/../../verilog/rtl/yifive/ycr4c/src/includes ]
set ::env(SYNTH_READ_BLACKBOX_LIB) 1
set ::env(SYNTH_DEFINES) [list SYNTHESIS ]
-set ::env(SDC_FILE) "$script_dir/base.sdc"
-set ::env(BASE_SDC_FILE) "$script_dir/base.sdc"
+set ::env(SDC_FILE) $::env(DESIGN_DIR)/base.sdc
+set ::env(BASE_SDC_FILE) $::env(DESIGN_DIR)/base.sdc
set ::env(LEC_ENABLE) 0
@@ -62,12 +62,11 @@
set ::env(GND_PIN) [list {vssd1}]
## Floorplan
-set ::env(FP_PIN_ORDER_CFG) $script_dir/pin_order.cfg
+set ::env(FP_PIN_ORDER_CFG) $::env(DESIGN_DIR)/pin_order.cfg
set ::env(FP_SIZING) absolute
set ::env(DIE_AREA) "0 0 810 640 "
set ::env(CELL_PAD) "6"
-set ::env(MACRO_PLACEMENT_CFG) $script_dir/macro_placement.cfg
set ::env(PL_TARGET_DENSITY) 0.37
set ::env(FP_IO_VEXTEND) {6}
@@ -75,7 +74,7 @@
set ::env(RT_MAX_LAYER) {met4}
#set ::env(GLB_RT_MAXLAYER) "5"
-set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 10
+#set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 10
set ::env(DIODE_INSERTION_STRATEGY) 3
diff --git a/signoff/pinmux/OPENLANE_VERSION b/signoff/pinmux/OPENLANE_VERSION
index 078e9d2..ee22c3e 100644
--- a/signoff/pinmux/OPENLANE_VERSION
+++ b/signoff/pinmux/OPENLANE_VERSION
@@ -1 +1 @@
-openlane 0dc6fb79c91082b94f8ded78d70f8bacbab96bf2
+openlane 4476a58407d670d251aa0be6a55e5391bb181c4e
diff --git a/signoff/pinmux/PDK_SOURCES b/signoff/pinmux/PDK_SOURCES
index b08beb4..e8e14ea 100644
--- a/signoff/pinmux/PDK_SOURCES
+++ b/signoff/pinmux/PDK_SOURCES
@@ -1 +1 @@
-open_pdks 41c0908b47130d5675ff8484255b43f66463a7d6
+open_pdks e8294524e5f67c533c5d0c3afa0bcc5b2a5fa066
diff --git a/signoff/qspim_top/OPENLANE_VERSION b/signoff/qspim_top/OPENLANE_VERSION
index 078e9d2..ee22c3e 100644
--- a/signoff/qspim_top/OPENLANE_VERSION
+++ b/signoff/qspim_top/OPENLANE_VERSION
@@ -1 +1 @@
-openlane 0dc6fb79c91082b94f8ded78d70f8bacbab96bf2
+openlane 4476a58407d670d251aa0be6a55e5391bb181c4e
diff --git a/signoff/qspim_top/PDK_SOURCES b/signoff/qspim_top/PDK_SOURCES
index b08beb4..e8e14ea 100644
--- a/signoff/qspim_top/PDK_SOURCES
+++ b/signoff/qspim_top/PDK_SOURCES
@@ -1 +1 @@
-open_pdks 41c0908b47130d5675ff8484255b43f66463a7d6
+open_pdks e8294524e5f67c533c5d0c3afa0bcc5b2a5fa066
diff --git a/signoff/uart_i2cm_usb_spi_top/OPENLANE_VERSION b/signoff/uart_i2cm_usb_spi_top/OPENLANE_VERSION
index 078e9d2..ee22c3e 100644
--- a/signoff/uart_i2cm_usb_spi_top/OPENLANE_VERSION
+++ b/signoff/uart_i2cm_usb_spi_top/OPENLANE_VERSION
@@ -1 +1 @@
-openlane 0dc6fb79c91082b94f8ded78d70f8bacbab96bf2
+openlane 4476a58407d670d251aa0be6a55e5391bb181c4e
diff --git a/signoff/uart_i2cm_usb_spi_top/PDK_SOURCES b/signoff/uart_i2cm_usb_spi_top/PDK_SOURCES
index b08beb4..e8e14ea 100644
--- a/signoff/uart_i2cm_usb_spi_top/PDK_SOURCES
+++ b/signoff/uart_i2cm_usb_spi_top/PDK_SOURCES
@@ -1 +1 @@
-open_pdks 41c0908b47130d5675ff8484255b43f66463a7d6
+open_pdks e8294524e5f67c533c5d0c3afa0bcc5b2a5fa066
diff --git a/signoff/user_project_wrapper/final_summary_report.csv b/signoff/user_project_wrapper/final_summary_report.csv
index b81db37..4a2c698 100644
--- a/signoff/user_project_wrapper/final_summary_report.csv
+++ b/signoff/user_project_wrapper/final_summary_report.csv
@@ -1,2 +1,2 @@
,design,design_name,config,flow_status,total_runtime,routed_runtime,(Cell/mm^2)/Core_Util,DIEAREA_mm^2,CellPer_mm^2,OpenDP_Util,Peak_Memory_Usage_MB,cell_count,tritonRoute_violations,Short_violations,MetSpc_violations,OffGrid_violations,MinHole_violations,Other_violations,Magic_violations,antenna_violations,lvs_total_errors,cvc_total_errors,klayout_violations,wire_length,vias,wns,pl_wns,optimized_wns,fastroute_wns,spef_wns,tns,pl_tns,optimized_tns,fastroute_tns,spef_tns,HPWL,routing_layer1_pct,routing_layer2_pct,routing_layer3_pct,routing_layer4_pct,routing_layer5_pct,routing_layer6_pct,wires_count,wire_bits,public_wires_count,public_wire_bits,memories_count,memory_bits,processes_count,cells_pre_abc,AND,DFF,NAND,NOR,OR,XOR,XNOR,MUX,inputs,outputs,level,EndCaps,TapCells,Diodes,Total_Physical_Cells,suggested_clock_frequency,suggested_clock_period,CLOCK_PERIOD,SYNTH_STRATEGY,SYNTH_MAX_FANOUT,FP_CORE_UTIL,FP_ASPECT_RATIO,FP_PDN_VPITCH,FP_PDN_HPITCH,PL_TARGET_DENSITY,GLB_RT_ADJUSTMENT,STD_CELL_LIBRARY,CELL_PAD,DIODE_INSERTION_STRATEGY
-0,/home/dinesha/workarea/opencore/git/riscduino_qcore/openlane/user_project_wrapper,user_project_wrapper,user_project_wrapper,flow completed,1h5m19s0ms,0h4m16s0ms,-2.0,-1,-1,-1,602.16,15,0,0,0,0,0,0,-1,0,0,-1,-1,1545431,14283,0.0,-1,-1,0.0,0.0,0.0,-1,-1,0.0,0.0,-1,0.0,7.52,9.31,1.62,2.13,0.0,413,4334,413,4334,0,0,0,15,0,0,0,0,0,0,0,0,-1,-1,-1,0,0,0,0,100.0,10.0,10,AREA 0,5,50,1,80,90,0.55,0.3,sky130_fd_sc_hd,4,0
+0,/home/dinesha/workarea/opencore/git/riscduino_qcore/openlane/user_project_wrapper,user_project_wrapper,user_project_wrapper,flow completed,1h5m41s0ms,0h4m15s0ms,-2.0,-1,-1,-1,601.77,15,0,0,0,0,0,0,-1,0,0,-1,-1,1536771,14397,0.0,-1,-1,0.0,0.0,0.0,-1,-1,0.0,0.0,-1,0.0,7.49,9.18,1.73,2.26,0.0,413,4334,413,4334,0,0,0,15,0,0,0,0,0,0,0,0,-1,-1,-1,0,0,0,0,100.0,10.0,10,AREA 0,5,50,1,80,90,0.55,0.3,sky130_fd_sc_hd,4,0
diff --git a/signoff/wb_host/OPENLANE_VERSION b/signoff/wb_host/OPENLANE_VERSION
index 078e9d2..ee22c3e 100644
--- a/signoff/wb_host/OPENLANE_VERSION
+++ b/signoff/wb_host/OPENLANE_VERSION
@@ -1 +1 @@
-openlane 0dc6fb79c91082b94f8ded78d70f8bacbab96bf2
+openlane 4476a58407d670d251aa0be6a55e5391bb181c4e
diff --git a/signoff/wb_host/PDK_SOURCES b/signoff/wb_host/PDK_SOURCES
index b08beb4..e8e14ea 100644
--- a/signoff/wb_host/PDK_SOURCES
+++ b/signoff/wb_host/PDK_SOURCES
@@ -1 +1 @@
-open_pdks 41c0908b47130d5675ff8484255b43f66463a7d6
+open_pdks e8294524e5f67c533c5d0c3afa0bcc5b2a5fa066
diff --git a/signoff/wb_interconnect/OPENLANE_VERSION b/signoff/wb_interconnect/OPENLANE_VERSION
index 078e9d2..ee22c3e 100644
--- a/signoff/wb_interconnect/OPENLANE_VERSION
+++ b/signoff/wb_interconnect/OPENLANE_VERSION
@@ -1 +1 @@
-openlane 0dc6fb79c91082b94f8ded78d70f8bacbab96bf2
+openlane 4476a58407d670d251aa0be6a55e5391bb181c4e
diff --git a/signoff/wb_interconnect/PDK_SOURCES b/signoff/wb_interconnect/PDK_SOURCES
index b08beb4..e8e14ea 100644
--- a/signoff/wb_interconnect/PDK_SOURCES
+++ b/signoff/wb_interconnect/PDK_SOURCES
@@ -1 +1 @@
-open_pdks 41c0908b47130d5675ff8484255b43f66463a7d6
+open_pdks e8294524e5f67c533c5d0c3afa0bcc5b2a5fa066
diff --git a/signoff/ycr4_iconnect/OPENLANE_VERSION b/signoff/ycr4_iconnect/OPENLANE_VERSION
index 078e9d2..ee22c3e 100644
--- a/signoff/ycr4_iconnect/OPENLANE_VERSION
+++ b/signoff/ycr4_iconnect/OPENLANE_VERSION
@@ -1 +1 @@
-openlane 0dc6fb79c91082b94f8ded78d70f8bacbab96bf2
+openlane 4476a58407d670d251aa0be6a55e5391bb181c4e
diff --git a/signoff/ycr4_iconnect/PDK_SOURCES b/signoff/ycr4_iconnect/PDK_SOURCES
index b08beb4..e8e14ea 100644
--- a/signoff/ycr4_iconnect/PDK_SOURCES
+++ b/signoff/ycr4_iconnect/PDK_SOURCES
@@ -1 +1 @@
-open_pdks 41c0908b47130d5675ff8484255b43f66463a7d6
+open_pdks e8294524e5f67c533c5d0c3afa0bcc5b2a5fa066
diff --git a/signoff/ycr_core_top/OPENLANE_VERSION b/signoff/ycr_core_top/OPENLANE_VERSION
index 078e9d2..ee22c3e 100644
--- a/signoff/ycr_core_top/OPENLANE_VERSION
+++ b/signoff/ycr_core_top/OPENLANE_VERSION
@@ -1 +1 @@
-openlane 0dc6fb79c91082b94f8ded78d70f8bacbab96bf2
+openlane 4476a58407d670d251aa0be6a55e5391bb181c4e
diff --git a/signoff/ycr_core_top/PDK_SOURCES b/signoff/ycr_core_top/PDK_SOURCES
index b08beb4..e8e14ea 100644
--- a/signoff/ycr_core_top/PDK_SOURCES
+++ b/signoff/ycr_core_top/PDK_SOURCES
@@ -1 +1 @@
-open_pdks 41c0908b47130d5675ff8484255b43f66463a7d6
+open_pdks e8294524e5f67c533c5d0c3afa0bcc5b2a5fa066
diff --git a/signoff/ycr_intf/OPENLANE_VERSION b/signoff/ycr_intf/OPENLANE_VERSION
index 078e9d2..ee22c3e 100644
--- a/signoff/ycr_intf/OPENLANE_VERSION
+++ b/signoff/ycr_intf/OPENLANE_VERSION
@@ -1 +1 @@
-openlane 0dc6fb79c91082b94f8ded78d70f8bacbab96bf2
+openlane 4476a58407d670d251aa0be6a55e5391bb181c4e
diff --git a/signoff/ycr_intf/PDK_SOURCES b/signoff/ycr_intf/PDK_SOURCES
index b08beb4..e8e14ea 100644
--- a/signoff/ycr_intf/PDK_SOURCES
+++ b/signoff/ycr_intf/PDK_SOURCES
@@ -1 +1 @@
-open_pdks 41c0908b47130d5675ff8484255b43f66463a7d6
+open_pdks e8294524e5f67c533c5d0c3afa0bcc5b2a5fa066
diff --git a/sta/scripts/caravel_timing.tcl b/sta/scripts/caravel_timing.tcl
index e80b873..ca5f009 100644
--- a/sta/scripts/caravel_timing.tcl
+++ b/sta/scripts/caravel_timing.tcl
@@ -1,26 +1,26 @@
set ::env(USER_ROOT) ".."
- set ::env(CARAVEL_ROOT) "/home/dinesha/workarea/efabless/MPW-6/caravel"
- set ::env(CARAVEL_PDK_ROOT) "/opt/pdk_mpw6"
+ set ::env(CARAVEL_ROOT) "/home/dinesha/workarea/efabless/MPW-7/caravel"
+ set ::env(CARAVEL_PDK_ROOT) "/opt/pdk_mpw7/sky130B"
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_sc_hd/lib/sky130_fd_sc_hd__tt_025C_1v80.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_sram_macros/lib/sky130_sram_2kbyte_1rw1r_32x512_8_TT_1p8V_25C.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_sram_macros/lib/sky130_sram_1kbyte_1rw1r_32x256_8_TT_1p8V_25C.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_sc_hvl/lib/sky130_fd_sc_hvl__tt_025C_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_sc_hvl/lib/sky130_fd_sc_hvl__tt_025C_3v30_lv1v80.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_gpiov2_tt_tt_025C_1v80_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_ground_hvc_wpad_tt_025C_1v80_3v30_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_ground_lvc_wpad_tt_025C_1v80_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_ground_lvc_wpad_tt_100C_1v80_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_power_lvc_wpad_tt_025C_1v80_3v30_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_xres4v2_tt_tt_025C_1v80_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_ef_io__gpiov2_pad_tt_tt_025C_1v80_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_ef_io__vccd_lvc_clamped_pad_tt_025C_1v80_3v30_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_ef_io__vdda_hvc_clamped_pad_tt_025C_1v80_3v30_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_ef_io__vssa_hvc_clamped_pad_tt_025C_1v80_3v30_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_ef_io__vssd_lvc_clamped3_pad_tt_025C_1v80_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_ef_io__vccd_lvc_clamped3_pad_tt_025C_1v80_3v30_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_ef_io__vssd_lvc_clamped_pad_tt_025C_1v80_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_sc_hd/lib/sky130_fd_sc_hd__tt_025C_1v80.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_sram_macros/lib/sky130_sram_2kbyte_1rw1r_32x512_8_TT_1p8V_25C.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_sram_macros/lib/sky130_sram_1kbyte_1rw1r_32x256_8_TT_1p8V_25C.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_sc_hvl/lib/sky130_fd_sc_hvl__tt_025C_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_sc_hvl/lib/sky130_fd_sc_hvl__tt_025C_3v30_lv1v80.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_gpiov2_tt_tt_025C_1v80_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_ground_hvc_wpad_tt_025C_1v80_3v30_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_ground_lvc_wpad_tt_025C_1v80_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_ground_lvc_wpad_tt_100C_1v80_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_power_lvc_wpad_tt_025C_1v80_3v30_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_xres4v2_tt_tt_025C_1v80_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_ef_io__gpiov2_pad_tt_tt_025C_1v80_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_ef_io__vccd_lvc_clamped_pad_tt_025C_1v80_3v30_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_ef_io__vdda_hvc_clamped_pad_tt_025C_1v80_3v30_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_ef_io__vssa_hvc_clamped_pad_tt_025C_1v80_3v30_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_ef_io__vssd_lvc_clamped3_pad_tt_025C_1v80_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_ef_io__vccd_lvc_clamped3_pad_tt_025C_1v80_3v30_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_ef_io__vssd_lvc_clamped_pad_tt_025C_1v80_3v30.lib
read_verilog $::env(CARAVEL_ROOT)/mgmt_core_wrapper/verilog/gl/mgmt_core.v
read_verilog $::env(CARAVEL_ROOT)/mgmt_core_wrapper/verilog/gl/DFFRAM.v
read_verilog $::env(CARAVEL_ROOT)/mgmt_core_wrapper/verilog/gl/mgmt_core_wrapper.v
diff --git a/sta/sdc/caravel.sdc b/sta/sdc/caravel.sdc
index 02e4326..049e647 100644
--- a/sta/sdc/caravel.sdc
+++ b/sta/sdc/caravel.sdc
@@ -36,10 +36,10 @@
## Case analysis
-set_case_analysis 0 [get_pins {mprj/u_intercon/cfg_cska_wi[0]}]
+set_case_analysis 1 [get_pins {mprj/u_intercon/cfg_cska_wi[0]}]
set_case_analysis 0 [get_pins {mprj/u_intercon/cfg_cska_wi[1]}]
-set_case_analysis 0 [get_pins {mprj/u_intercon/cfg_cska_wi[2]}]
-set_case_analysis 1 [get_pins {mprj/u_intercon/cfg_cska_wi[3]}]
+set_case_analysis 1 [get_pins {mprj/u_intercon/cfg_cska_wi[2]}]
+set_case_analysis 0 [get_pins {mprj/u_intercon/cfg_cska_wi[3]}]
set_case_analysis 0 [get_pins {mprj/u_pinmux/cfg_cska_pinmux[0]}]
set_case_analysis 0 [get_pins {mprj/u_pinmux/cfg_cska_pinmux[1]}]
@@ -51,15 +51,15 @@
set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_sp_co[2]}]
set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_sp_co[3]}]
-set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_spi[0]}]
-set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_spi[1]}]
+set_case_analysis 1 [get_pins {mprj/u_qspi_master/cfg_cska_spi[0]}]
+set_case_analysis 1 [get_pins {mprj/u_qspi_master/cfg_cska_spi[1]}]
set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_spi[2]}]
set_case_analysis 1 [get_pins {mprj/u_qspi_master/cfg_cska_spi[3]}]
-set_case_analysis 1 [get_pins {mprj/u_riscv_top.u_intf/cfg_cska_riscv[0]}]
+set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_intf/cfg_cska_riscv[0]}]
set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_intf/cfg_cska_riscv[1]}]
-set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_intf/cfg_cska_riscv[2]}]
-set_case_analysis 1 [get_pins {mprj/u_riscv_top.u_intf/cfg_cska_riscv[3]}]
+set_case_analysis 1 [get_pins {mprj/u_riscv_top.u_intf/cfg_cska_riscv[2]}]
+set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_intf/cfg_cska_riscv[3]}]
set_case_analysis 1 [get_pins {mprj/u_wb_host/cfg_cska_wh[0]}]
set_case_analysis 0 [get_pins {mprj/u_wb_host/cfg_cska_wh[1]}]
diff --git a/verilog/dv/bfm/bfm_spim.v b/verilog/dv/bfm/bfm_spim.v
new file mode 100644
index 0000000..f04f8b9
--- /dev/null
+++ b/verilog/dv/bfm/bfm_spim.v
@@ -0,0 +1,260 @@
+
+
+// SPI Master BFM
+// Command-1 : 0x10,
+// SI : <CMD[7:0]> <ADDR[31:0]><Dummy[7:0]>
+// SO : ------------------------------------<RDATA[31:0]>
+// Command-2 : 0x2F ,
+// SI : <CMD[7:0]> <ADDR[31:0]><WDATA[31:0]><Dummy[7:0]>
+// SO : ---------------------------------------------
+
+`timescale 1 ns / 1 ps
+`define TB_SPI_CLK_PW 100
+
+module bfm_spim (
+
+ // SPI
+ spi_clk,
+ spi_sel_n,
+ spi_din,
+ spi_dout
+
+ );
+
+output spi_clk;
+output spi_sel_n;
+output spi_din;
+input spi_dout;
+
+reg spi_clk;
+reg spi_sel_n;
+reg spi_din;
+reg error_ind;
+
+event error_detected;
+integer err_cnt;
+
+
+initial begin
+
+spi_clk = 0;
+spi_sel_n = 1;
+spi_din = 0;
+error_ind = 0;
+err_cnt = 0;
+
+end
+
+task init;
+begin
+ spi_clk=1;
+ spi_sel_n=1;
+ spi_din=1;
+end
+endtask
+
+
+always @error_detected begin
+ error_ind = 1;
+ err_cnt = err_cnt + 1;
+end
+
+
+
+task set_spi_sel_n;
+begin
+ #10;
+ spi_sel_n=0;
+ #100;
+end
+endtask
+
+task reset_spi_sel_n;
+begin
+ #10;
+ spi_sel_n=1;
+ #100;
+end
+endtask
+
+
+
+
+//-----------------------------
+// Reg Write 32 Bit
+//-----------------------------
+
+task reg_wr_dword;
+input [31:0] addr;
+input [31:0] dword;
+reg [31:0] addr;
+reg [31:0] dword;
+begin
+
+ set_spi_sel_n;
+ send_cmd(8'h2F);
+ send_dword(addr);
+ send_dword(dword);
+ send_byte(8'h0); // Dummy byte
+
+ $display("STATUS: At time %t: SPI WRITE : ADDR = %h DATA = %h ", $time, addr, dword);
+
+ reset_spi_sel_n;
+
+end
+endtask
+
+//-----------------------------
+// Reg Read 32 Bit
+//-----------------------------
+task reg_rd_dword;
+input [31:0] addr;
+output [31:0] dword;
+reg [31:0] addr;
+reg [31:0] dword;
+integer i;
+begin
+
+ set_spi_sel_n;
+ send_cmd(8'h10);
+ send_dword(addr);
+ send_byte(8'h0); // Dummy byte
+ receive_dword(dword);
+
+ $display("STATUS: At time %t: SPI READ :addr = %h data = %h ", $time, addr, dword);
+
+ reset_spi_sel_n;
+end
+endtask
+
+//-----------------------------
+// Reg Read 32 Bit compare
+//-----------------------------
+task reg_rd_dword_cmp;
+input [31:0] addr;
+input [31:0] exp_dword;
+reg [31:0] addr;
+reg [31:0] dword;
+integer i;
+begin
+
+ set_spi_sel_n;
+ send_cmd(8'h10);
+ send_dword(addr);
+ send_byte(8'h0); // Dummy byte
+ receive_dword(dword);
+
+ if (exp_dword !== dword)
+ begin
+ $display("ERROR: At time %t: SPI READ FAILED ADDR: %x EXP = %x RXD : %x ",$time,addr,exp_dword,dword);
+ -> error_detected;
+ end else begin
+ $display("STATUS: At time %t: SPI READ ADDR: %x RXD : %x ",$time,addr,dword);
+
+ end
+
+ reset_spi_sel_n;
+end
+endtask
+
+
+//-----------------------------
+// Command Byte
+//-----------------------------
+task send_cmd;
+input [7:0] data;
+begin
+begin
+ send_byte(data[7:0]);
+end
+
+end
+endtask
+// Write 4 Byte
+task send_dword;
+input dword;
+reg [31:0] dword;
+begin
+ send_word(dword[31:16]);
+ send_word(dword[15:0]);
+end
+endtask
+
+// Write 2 Byte
+task send_word;
+input word;
+reg [15:0] word;
+begin
+ send_byte(word[15:8]);
+ send_byte(word[7:0]);
+end
+endtask // spi_send_word
+
+
+
+// Write 1 Byte
+task send_byte;
+input data;
+reg [7:0] data;
+integer i;
+begin
+
+ for (i=7; i>=0; i=i-1)
+ begin
+ spi_clk=0;
+ spi_din = data[i];
+ #`TB_SPI_CLK_PW;
+ spi_clk=1;
+ // if (i != 0)
+ #`TB_SPI_CLK_PW;
+ end
+
+end
+endtask
+//----------------------------
+// READ TASK
+//----------------------------
+
+// READ 4 BYTE
+task receive_dword;
+output dword;
+reg [31:0] dword;
+begin
+ receive_word(dword[31:16]);
+ receive_word(dword[15:0]);
+end
+endtask
+
+// READ 2 BYTE
+task receive_word;
+output word;
+reg [15:0] word;
+begin
+ receive_byte(word[15:8]);
+ receive_byte(word[7:0]);
+end
+endtask
+
+
+
+// READ 1 BYTE
+task receive_byte;
+output data;
+reg [7:0] data;
+integer i;
+begin
+ for (i=7; i>=0; i=i-1)
+ begin
+ spi_clk=0;
+ #`TB_SPI_CLK_PW;
+ spi_clk=1;
+ data[i] = spi_dout;
+// if (i !=0)
+ #`TB_SPI_CLK_PW;
+ end
+
+end
+endtask
+
+endmodule
+
diff --git a/verilog/dv/user_spi_isp/Makefile b/verilog/dv/user_spi_isp/Makefile
new file mode 100644
index 0000000..f655404
--- /dev/null
+++ b/verilog/dv/user_spi_isp/Makefile
@@ -0,0 +1,88 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+
+# ---- Include Partitioned Makefiles ----
+
+CONFIG = caravel_user_project
+
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+
+DESIGNS?=../../..
+
+export USER_PROJECT_VERILOG ?= $(DESIGNS)/verilog
+## YIFIVE FIRMWARE
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+GCC_PREFIX?=riscv32-unknown-elf
+
+
+## Simulation mode: RTL/GL
+SIM?=RTL
+DUMP?=OFF
+
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
+
+.SUFFIXES:
+
+PATTERN = user_spi_isp
+
+all: ${PATTERN:=.vcd}
+
+
+vvp: ${PATTERN:=.vvp}
+
+%.vvp: %_tb.v
+ifeq ($(SIM),RTL)
+ ifeq ($(DUMP),OFF)
+ iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
+ $< -o $@
+ else
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
+ $< -o $@
+ endif
+else
+ ifeq ($(DUMP),OFF)
+ iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+ $< -o $@
+ else
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+ $< -o $@
+ endif
+endif
+
+%.vcd: %.vvp
+ vvp $<
+
+
+
+# ---- Clean ----
+
+clean:
+ rm -f *.elf *.hex *.bin *.vvp *.vcd *.log *.dump
+
+.PHONY: clean all
diff --git a/verilog/dv/user_spi_isp/run_iverilog b/verilog/dv/user_spi_isp/run_iverilog
new file mode 100755
index 0000000..e461fd1
--- /dev/null
+++ b/verilog/dv/user_spi_isp/run_iverilog
@@ -0,0 +1,42 @@
+# //////////////////////////////////////////////////////////////////////////////
+# // SPDX-FileCopyrightText: 2021, Dinesh Annayya
+# //
+# // Licensed under the Apache License, Version 2.0 (the "License");
+# // you may not use this file except in compliance with the License.
+# // You may obtain a copy of the License at
+# //
+# // http://www.apache.org/licenses/LICENSE-2.0
+# //
+# // Unless required by applicable law or agreed to in writing, software
+# // distributed under the License is distributed on an "AS IS" BASIS,
+# // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# // See the License for the specific language governing permissions and
+# // limitations under the License.
+# // SPDX-License-Identifier: Apache-2.0
+# // SPDX-FileContributor: Dinesh Annayya <dinesha@opencores.org>
+# // //////////////////////////////////////////////////////////////////////////
+riscv64-unknown-elf-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=1 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\" -c -I./ -I../../rtl/syntacore/scr1/sim/tests/common user_uart.c -o user_uart.o
+
+riscv64-unknown-elf-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=1 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\" -D__ASSEMBLY__=1 -c -I./ -I../../rtl/syntacore/scr1/sim/tests/common/ ../../rtl/syntacore/scr1/sim/tests/common/crt_tcm.S -o crt_tcm.o
+
+riscv64-unknown-elf-gcc -o user_uart.elf -T ../../rtl/syntacore/scr1/sim/tests/common/link_tcm.ld user_uart.o crt_tcm.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32
+
+riscv64-unknown-elf-objcopy -O verilog user_uart.elf user_uart.hex
+
+riscv64-unknown-elf-objdump -D user_uart.elf > user_uart.dump
+
+rm crt_tcm.o user_uart.o
+
+#iverilog with waveform dump
+iverilog -g2005-sv -DWFDUMP -DFUNCTIONAL -DSIM -I $PDK_PATH -I ../../../caravel/verilog/rtl -I ../ -I ../../../verilog/rtl -I ../ -I ../../../verilog -I ../../../verilog/rtl/syntacore/scr1/src/includes -I ../../../verilog/rtl/sdram_ctrl/src/defs -I ../../../verilog/rtl/i2cm/src/includes -I ../../../verilog/rtl/usb1_host/src/includes -I $CARAVEL_ROOT/verilog/dv/caravel -I ../model -I ../agents user_uart_tb.v -o user_uart_tb.vvp
+
+
+#iverilog -g2005-sv -I $PDK_PATH -DFUNCTIONAL -DSIM -I ../../../caravel/verilog/rtl -I ../ -I ../../../verilog/rtl -I ../../../verilog -I ../../../verilog/rtl/syntacore/scr1/src/includes -I ../../../verilog/rtl/sdram_ctrl/src/defs -I $CARAVEL_ROOT/verilog/dv/caravel -I ../model -I ../agents user_uart_tb.v -o user_uart_tb.vvp
+
+# GLS
+#iverilog -g2005-sv -D GL -D FUNCTIONAL -I $PDK_PATH -I ../../../caravel/verilog/rtl -I ../ -I ../../../verilog/gl -I ../../../verilog -I /home/dinesha/workarea/pdk/sky130A -I ../../../verilog/rtl/syntacore/scr1/src/includes -I ../../../verilog/rtl/sdram_ctrl/src/defs -I $CARAVEL_ROOT/verilog/dv/caravel -I ../model -I ../agents user_uart_tb.v -o user_uart_tb.vvp
+#
+
+vvp user_uart_tb.vvp | tee test.log
+
+\rm -rf user_uart_tb.vvp
diff --git a/verilog/dv/user_spi_isp/user_spi_isp_tb.v b/verilog/dv/user_spi_isp/user_spi_isp_tb.v
new file mode 100644
index 0000000..a0e0fb5
--- /dev/null
+++ b/verilog/dv/user_spi_isp/user_spi_isp_tb.v
@@ -0,0 +1,254 @@
+////////////////////////////////////////////////////////////////////////////
+// SPDX-FileCopyrightText: 2021 , Dinesh Annayya
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+// SPDX-FileContributor: Modified by Dinesh Annayya <dinesha@opencores.org>
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Standalone User validation Test bench ////
+//// ////
+//// This file is part of the Riscduino cores project ////
+//// https://github.com/dineshannayya/riscduino.git ////
+//// ////
+//// Description ////
+//// This is a standalone test bench to validate the ////
+//// Digital core using spi isp i/f. ////
+//// ////
+//// To Do: ////
+//// nothing ////
+//// ////
+//// Author(s): ////
+//// - Dinesh Annayya, dinesha@opencores.org ////
+//// ////
+//// Revision : ////
+//// 0.1 - 20th Feb 2022, Dinesh A ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2000 Authors and OPENCORES.ORG ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+
+`default_nettype wire
+
+`timescale 1 ns / 1 ps
+
+`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
+`include "bfm_spim.v"
+
+module user_spi_isp_tb;
+
+reg clock ;
+reg wb_rst_i ;
+reg power1, power2;
+reg power3, power4;
+
+reg wbd_ext_cyc_i; // strobe/request
+reg wbd_ext_stb_i; // strobe/request
+reg [31:0] wbd_ext_adr_i; // address
+reg wbd_ext_we_i; // write
+reg [31:0] wbd_ext_dat_i; // data output
+reg [3:0] wbd_ext_sel_i; // byte enable
+
+wire [31:0] wbd_ext_dat_o; // data input
+wire wbd_ext_ack_o; // acknowlegement
+wire wbd_ext_err_o; // error
+
+// User I/O
+wire [37:0] io_oeb ;
+wire [37:0] io_out ;
+wire [37:0] io_in ;
+
+wire [37:0] mprj_io ;
+wire [7:0] mprj_io_0 ;
+reg test_fail ;
+reg [31:0] read_data ;
+
+reg [127:0] la_data_in;
+reg flag;
+
+// SCLK
+wire sclk;
+wire ssn;
+wire sdi;
+wire sdo;
+wire sd_oen;
+
+integer i,j;
+
+ // External clock is used by default. Make this artificially fast for the
+ // simulation. Normally this would be a slow clock and the digital PLL
+ // would be the fast clock.
+
+ always #12.5 clock <= (clock === 1'b0);
+
+ initial begin
+ clock = 0;
+ la_data_in = 1;
+ end
+
+ `ifdef WFDUMP
+ initial begin
+ $dumpfile("simx.vcd");
+ $dumpvars(0, user_spi_isp_tb);
+ end
+ `endif
+
+ initial begin
+ clock = 0;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ end
+initial
+begin
+ wb_rst_i <= 1'b1;
+
+ #100;
+ wb_rst_i <= 1'b0; // Release reset
+
+ $display("Monitor: Standalone User SPI ISP Test Started");
+
+
+ // Remove Wb Reset
+ u_spim.reg_wr_dword(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+
+ repeat (2) @(posedge clock);
+ #1;
+
+ $display("Monitor: Writing expected value");
+
+ test_fail = 0;
+ u_spim.reg_wr_dword(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_1,32'h11223344);
+ u_spim.reg_wr_dword(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_2,32'h22334455);
+ u_spim.reg_wr_dword(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_3,32'h33445566);
+ u_spim.reg_wr_dword(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_4,32'h44556677);
+ u_spim.reg_wr_dword(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_5,32'h55667788);
+ u_spim.reg_wr_dword(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_6,32'h66778899);
+
+ u_spim.reg_rd_dword_cmp(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_1,32'h11223344);
+ u_spim.reg_rd_dword_cmp(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_2,32'h22334455);
+ u_spim.reg_rd_dword_cmp(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_3,32'h33445566);
+ u_spim.reg_rd_dword_cmp(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_4,32'h44556677);
+ u_spim.reg_rd_dword_cmp(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_5,32'h55667788);
+ u_spim.reg_rd_dword_cmp(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_6,32'h66778899);
+
+
+
+ $display("###################################################");
+ if(u_spim.err_cnt == 0) begin
+ `ifdef GL
+ $display("Monitor: Standalone User SPI ISP (GL) Passed");
+ `else
+ $display("Monitor: Standalone User SPI ISP (RTL) Passed");
+ `endif
+ end else begin
+ `ifdef GL
+ $display("Monitor: Standalone User SPI ISP (GL) Failed");
+ `else
+ $display("Monitor: Standalone User SPI ISP (RTL) Failed");
+ `endif
+ end
+ $display("###################################################");
+ #100
+ $finish;
+end
+
+
+wire USER_VDD1V8 = 1'b1;
+wire VSS = 1'b0;
+
+
+user_project_wrapper u_top(
+`ifdef USE_POWER_PINS
+ .vccd1(USER_VDD1V8), // User area 1 1.8V supply
+ .vssd1(VSS), // User area 1 digital ground
+`endif
+ .wb_clk_i (clock), // System clock
+ .user_clock2 (1'b1), // Real-time clock
+ .wb_rst_i (wb_rst_i), // Regular Reset signal
+
+ .wbs_cyc_i (wbd_ext_cyc_i), // strobe/request
+ .wbs_stb_i (wbd_ext_stb_i), // strobe/request
+ .wbs_adr_i (wbd_ext_adr_i), // address
+ .wbs_we_i (wbd_ext_we_i), // write
+ .wbs_dat_i (wbd_ext_dat_i), // data output
+ .wbs_sel_i (wbd_ext_sel_i), // byte enable
+
+ .wbs_dat_o (wbd_ext_dat_o), // data input
+ .wbs_ack_o (wbd_ext_ack_o), // acknowlegement
+
+
+ // Logic Analyzer Signals
+ .la_data_in (la_data_in) ,
+ .la_data_out (),
+ .la_oenb ('0),
+
+
+ // IOs
+ .io_in (io_in) ,
+ .io_out (io_out) ,
+ .io_oeb (io_oeb) ,
+
+ .user_irq ()
+
+);
+
+`ifndef GL // Drive Power for Hold Fix Buf
+ // All standard cell need power hook-up for functionality work
+ initial begin
+ end
+`endif
+
+assign io_in[0] = 1'b0;
+assign io_in[16] = sclk;
+assign io_in[15] = sdi;
+assign sdo = io_out[14];
+
+bfm_spim u_spim (
+ // SPI
+ .spi_clk (sclk ),
+ .spi_sel_n (ssn ),
+ .spi_din (sdi ),
+ .spi_dout (sdo )
+
+ );
+
+
+endmodule
+`default_nettype wire
diff --git a/verilog/rtl/wb_interconnect/src/wb_interconnect.sv b/verilog/rtl/wb_interconnect/src/wb_interconnect.sv
index 9fb6344..d50ba34 100644
--- a/verilog/rtl/wb_interconnect/src/wb_interconnect.sv
+++ b/verilog/rtl/wb_interconnect/src/wb_interconnect.sv
@@ -300,8 +300,8 @@
// 0x1001_0040 to 0x1001_007F - I2C
// 0x1001_0080 to 0x1001_00BF - USB
// 0x1001_00C0 to 0x1001_00FF - SSPIM
-// 0x1002_0000 to 0x1002_00FF - PINMUX
// 0x1001_0100 to 0x1001_013F - UART1
+// 0x1002_0000 to 0x1002_00FF - PINMUX
// 0x3080_0000 to 0x3080_00FF - WB HOST (This decoding happens at wb_host block)
// ---------------------------------------------------------------------------
//
