| # Copyright 2020 Efabless Corporation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # inputs expected as env vars |
| #set opt $::env(SYNTH_OPT) |
| set buffering $::env(SYNTH_BUFFERING) |
| set sizing $::env(SYNTH_SIZING) |
| |
| yosys -import |
| |
| set vtop $::env(DESIGN_NAME) |
| #set sdc_file $::env(SDC_FILE) |
| set sclib $::env(LIB_SYNTH) |
| |
| if { [info exists ::env(SYNTH_DEFINES) ] } { |
| foreach define $::env(SYNTH_DEFINES) { |
| log "Defining $define" |
| verilog_defines -D$define |
| } |
| } |
| |
| set vIdirsArgs "" |
| if {[info exist ::env(VERILOG_INCLUDE_DIRS)]} { |
| foreach dir $::env(VERILOG_INCLUDE_DIRS) { |
| lappend vIdirsArgs "-I$dir" |
| } |
| set vIdirsArgs [join $vIdirsArgs] |
| } |
| |
| if { $::env(SYNTH_READ_BLACKBOX_LIB) } { |
| log "Reading $::env(LIB_SYNTH_COMPLETE_NO_PG) as a blackbox" |
| foreach lib $::env(LIB_SYNTH_COMPLETE_NO_PG) { |
| read_liberty -lib -ignore_miss_dir -setattr blackbox $lib |
| } |
| } |
| |
| if { [info exists ::env(EXTRA_LIBS) ] } { |
| foreach lib $::env(EXTRA_LIBS) { |
| read_liberty -lib -ignore_miss_dir -setattr blackbox $lib |
| } |
| } |
| |
| if { [info exists ::env(VERILOG_FILES_BLACKBOX)] } { |
| foreach verilog_file $::env(VERILOG_FILES_BLACKBOX) { |
| read_verilog -sv -lib {*}$vIdirsArgs $verilog_file |
| } |
| } |
| |
| |
| # ns expected (in sdc as well) |
| set clock_period [expr {$::env(CLOCK_PERIOD)*1000}] |
| |
| set driver $::env(SYNTH_DRIVING_CELL) |
| set cload $::env(SYNTH_CAP_LOAD) |
| # input pin cap of IN_3VX8 |
| set max_FO $::env(SYNTH_MAX_FANOUT) |
| if {![info exist ::env(SYNTH_MAX_TRAN)]} { |
| set ::env(SYNTH_MAX_TRAN) [expr {0.1*$clock_period}] |
| } else { |
| set ::env(SYNTH_MAX_TRAN) [expr {$::env(SYNTH_MAX_TRAN) * 1000}] |
| } |
| set max_Tran $::env(SYNTH_MAX_TRAN) |
| |
| |
| # Mapping parameters |
| set A_factor 0.00 |
| set B_factor 0.88 |
| set F_factor 0.00 |
| |
| # Don't change these unless you know what you are doing |
| set stat_ext ".stat.rpt" |
| set chk_ext ".chk.rpt" |
| set gl_ext ".gl.v" |
| set constr_ext ".$clock_period.constr" |
| set timing_ext ".timing.txt" |
| set abc_ext ".abc" |
| |
| |
| # get old sdc, add library specific stuff for abc scripts |
| set sdc_file $::env(yosys_tmp_file_tag).sdc |
| set outfile [open ${sdc_file} w] |
| #puts $outfile $sdc_data |
| puts $outfile "set_driving_cell ${driver}" |
| puts $outfile "set_load ${cload}" |
| close $outfile |
| |
| |
| # ABC Scrips |
| set abc_rs_K "resub,-K," |
| set abc_rs "resub" |
| set abc_rsz "resub,-z" |
| set abc_rw_K "rewrite,-K," |
| set abc_rw "rewrite" |
| set abc_rwz "rewrite,-z" |
| set abc_rf "refactor" |
| set abc_rfz "refactor,-z" |
| set abc_b "balance" |
| |
| set abc_resyn2 "${abc_b}; ${abc_rw}; ${abc_rf}; ${abc_b}; ${abc_rw}; ${abc_rwz}; ${abc_b}; ${abc_rfz}; ${abc_rwz}; ${abc_b}" |
| set abc_share "strash; multi,-m; ${abc_resyn2}" |
| set abc_resyn2a "${abc_b};${abc_rw};${abc_b};${abc_rw};${abc_rwz};${abc_b};${abc_rwz};${abc_b}" |
| set abc_resyn3 "balance;resub;resub,-K,6;balance;resub,-z;resub,-z,-K,6;balance;resub,-z,-K,5;balance" |
| set abc_resyn2rs "${abc_b};${abc_rs_K},6;${abc_rw};${abc_rs_K},6,-N,2;${abc_rf};${abc_rs_K},8;${abc_rw};${abc_rs_K},10;${abc_rwz};${abc_rs_K},10,-N,2;${abc_b},${abc_rs_K},12;${abc_rfz};${abc_rs_K},12,-N,2;${abc_rwz};${abc_b}" |
| |
| set abc_choice "fraig_store; ${abc_resyn2}; fraig_store; ${abc_resyn2}; fraig_store; fraig_restore" |
| set abc_choice2 "fraig_store; balance; fraig_store; ${abc_resyn2}; fraig_store; ${abc_resyn2}; fraig_store; ${abc_resyn2}; fraig_store; fraig_restore" |
| |
| set abc_map_old_cnt "map,-p,-a,-B,0.2,-A,0.9,-M,0" |
| set abc_map_old_dly "map,-p,-B,0.2,-A,0.9,-M,0" |
| set abc_retime_area "retime,-D,{D},-M,5" |
| set abc_retime_dly "retime,-D,{D},-M,6" |
| set abc_map_new_area "amap,-m,-Q,0.1,-F,20,-A,20,-C,5000" |
| |
| set abc_area_recovery_1 "${abc_choice}; map;" |
| set abc_area_recovery_2 "${abc_choice2}; map;" |
| |
| set map_old_cnt "map,-p,-a,-B,0.2,-A,0.9,-M,0" |
| set map_old_dly "map,-p,-B,0.2,-A,0.9,-M,0" |
| set abc_retime_area "retime,-D,{D},-M,5" |
| set abc_retime_dly "retime,-D,{D},-M,6" |
| set abc_map_new_area "amap,-m,-Q,0.1,-F,20,-A,20,-C,5000" |
| |
| if {$buffering==1} { |
| set abc_fine_tune "buffer,-N,${max_FO},-S,${max_Tran};upsize,{D};dnsize,{D}" |
| } elseif {$sizing} { |
| set abc_fine_tune "upsize,{D};dnsize,{D}" |
| } else { |
| set abc_fine_tune "" |
| } |
| |
| |
| set delay_scripts [list \ |
| "+read_constr,${sdc_file};fx;mfs;strash;refactor;${abc_resyn2};${abc_retime_dly}; scleanup;${abc_map_old_dly};retime,-D,{D};${abc_fine_tune};stime,-p;print_stats -m" \ |
| \ |
| "+read_constr,${sdc_file};fx;mfs;strash;refactor;${abc_resyn2};${abc_retime_dly}; scleanup;${abc_choice2};${abc_map_old_dly};${abc_area_recovery_2}; retime,-D,{D};${abc_fine_tune};stime,-p;print_stats -m" \ |
| \ |
| "+read_constr,${sdc_file};fx;mfs;strash;refactor;${abc_resyn2};${abc_retime_dly}; scleanup;${abc_choice};${abc_map_old_dly};${abc_area_recovery_1}; retime,-D,{D};${abc_fine_tune};stime,-p;print_stats -m" \ |
| \ |
| "+read_constr,${sdc_file};fx;mfs;strash;refactor;${abc_resyn2};${abc_retime_area};scleanup;${abc_choice2};${abc_map_new_area};${abc_choice2};${abc_map_old_dly};retime,-D,{D};${abc_fine_tune};stime,-p;print_stats -m" \ |
| ] |
| |
| set area_scripts [list \ |
| "+read_constr,${sdc_file};fx;mfs;strash;refactor;${abc_resyn2};${abc_retime_area};scleanup;${abc_choice2};${abc_map_new_area};retime,-D,{D};${abc_fine_tune};stime,-p;print_stats -m" \ |
| \ |
| "+read_constr,${sdc_file};fx;mfs;strash;refactor;${abc_resyn2};${abc_retime_area};scleanup;${abc_choice2};${abc_map_new_area};${abc_choice2};${abc_map_new_area};retime,-D,{D};${abc_fine_tune};stime,-p;print_stats -m" \ |
| \ |
| "+read_constr,${sdc_file};fx;mfs;strash;refactor;${abc_choice2};${abc_retime_area};scleanup;${abc_choice2};${abc_map_new_area};${abc_choice2};${abc_map_new_area};retime,-D,{D};${abc_fine_tune};stime,-p;print_stats -m" \ |
| ] |
| |
| set all_scripts [list {*}$delay_scripts {*}$area_scripts] |
| |
| set strategy_parts [split $::env(SYNTH_STRATEGY)] |
| |
| proc synth_strategy_format_err { } { |
| upvar area_scripts area_scripts |
| upvar delay_scripts delay_scripts |
| log -stderr "\[ERROR] Misformatted SYNTH_STRATEGY (\"$::env(SYNTH_STRATEGY)\")." |
| log -stderr "\[ERROR] Correct format is \"DELAY|AREA 0-[expr [llength $delay_scripts]-1]|0-[expr [llength $area_scripts]-1]\"." |
| exit 1 |
| } |
| |
| if { [llength $strategy_parts] != 2 } { |
| synth_strategy_format_err |
| } |
| |
| set strategy_type [lindex $strategy_parts 0] |
| set strategy_type_idx [lindex $strategy_parts 1] |
| |
| if { $strategy_type != "AREA" && $strategy_type != "DELAY" } { |
| log -stderr "\[ERROR] AREA|DELAY tokens not found. ($strategy_type)" |
| synth_strategy_format_err |
| } |
| |
| if { $strategy_type == "DELAY" && $strategy_type_idx >= [llength $delay_scripts] } { |
| log -stderr "\[ERROR] strategy index ($strategy_type_idx) is too high." |
| synth_strategy_format_err |
| } |
| |
| if { $strategy_type == "AREA" && $strategy_type_idx >= [llength $area_scripts] } { |
| log -stderr "\[ERROR] strategy index ($strategy_type_idx) is too high." |
| synth_strategy_format_err |
| } |
| |
| if { $strategy_type == "DELAY" } { |
| set strategy $strategy_type_idx |
| } else { |
| set strategy [expr {[llength $delay_scripts]+$strategy_type_idx}] |
| } |
| |
| set adder_type $::env(SYNTH_ADDER_TYPE) |
| if { !($adder_type in [list "YOSYS" "FA" "RCA" "CSA"]) } { |
| log -stderr "\[ERROR] Misformatted SYNTH_ADDER_TYPE (\"$::env(SYNTH_ADDER_TYPE)\")." |
| log -stderr "\[ERROR] Correct format is \"YOSYS|FA|RCA|CSA\"." |
| exit 1 |
| } |
| |
| for { set i 0 } { $i < [llength $::env(VERILOG_FILES)] } { incr i } { |
| read_verilog -sv {*}$vIdirsArgs [lindex $::env(VERILOG_FILES) $i] |
| } |
| ## Module level parameter overide - Dinesh |
| if { [info exists ::env(SYNTH_PARAMS) ] } { |
| log "Reading $::env(SYNTH_PARAMS) as a parameter" |
| set records [split $::env(SYNTH_PARAMS) ","] |
| foreach rec $records { |
| chparam -set [lindex $rec 0] [lindex $rec 1] $vtop |
| } |
| } else { |
| log "No parameter define found" |
| } |
| |
| select -module $vtop |
| |
| show -format dot -prefix $::env(TMP_DIR)/synthesis/hierarchy |
| select -clear |
| |
| hierarchy -check -top $vtop |
| |
| # Infer tri-state buffers. |
| set tbuf_map false |
| if { [info exists ::env(TRISTATE_BUFFER_MAP)] } { |
| if { [file exists $::env(TRISTATE_BUFFER_MAP)] } { |
| set tbuf_map true |
| tribuf |
| } else { |
| log "WARNING: TRISTATE_BUFFER_MAP is defined but could not be found: $::env(TRISTATE_BUFFER_MAP)" |
| } |
| } |
| |
| # handle technology mapping of rca and csa adders |
| if { $adder_type == "RCA"} { |
| if { [info exists ::env(RIPPLE_CARRY_ADDER_MAP)] && [file exists $::env(RIPPLE_CARRY_ADDER_MAP)] } { |
| techmap -map $::env(RIPPLE_CARRY_ADDER_MAP) |
| } |
| } elseif { $adder_type == "CSA"} { |
| if { [info exists ::env(CARRY_SELECT_ADDER_MAP)] && [file exists $::env(CARRY_SELECT_ADDER_MAP)] } { |
| techmap -map $::env(CARRY_SELECT_ADDER_MAP) |
| } |
| } |
| |
| if { $::env(SYNTH_NO_FLAT) } { |
| synth -top $vtop |
| } else { |
| synth -top $vtop -flatten |
| } |
| |
| # write a post techmap dot file |
| show -format dot -prefix $::env(TMP_DIR)/synthesis/post_techmap |
| |
| if { $::env(SYNTH_SHARE_RESOURCES) } { |
| share -aggressive |
| } |
| |
| set fa_map false |
| if { $adder_type == "FA" } { |
| if { [info exists ::env(FULL_ADDER_MAP)] && [file exists $::env(FULL_ADDER_MAP)] } { |
| extract_fa -fa -v |
| extract_fa -ha -v |
| set fa_map true |
| } |
| } |
| |
| opt |
| opt_clean -purge |
| |
| tee -o "$::env(yosys_report_file_tag)_pre.stat" stat |
| |
| # Map tri-state buffers. |
| if { $tbuf_map } { |
| log {mapping tbuf} |
| techmap -map $::env(TRISTATE_BUFFER_MAP) |
| simplemap |
| } |
| |
| # Map Full Adders. |
| if { $fa_map } { |
| techmap -map $::env(FULL_ADDER_MAP) |
| } |
| |
| # handle technology mapping of 4-MUX, and tell Yosys to infer 4-muxes |
| if { [info exists ::env(SYNTH_MUX4_MAP)] && [file exists $::env(SYNTH_MUX4_MAP)] } { |
| muxcover -mux4 |
| techmap -map $::env(SYNTH_MUX4_MAP) |
| simplemap |
| } |
| |
| # handle technology mapping of 2-MUX |
| if { [info exists ::env(SYNTH_MUX_MAP)] && [file exists $::env(SYNTH_MUX_MAP)] } { |
| techmap -map $::env(SYNTH_MUX_MAP) |
| simplemap |
| } |
| |
| # handle technology mapping of latches |
| if { [info exists ::env(SYNTH_LATCH_MAP)] && [file exists $::env(SYNTH_LATCH_MAP)] } { |
| techmap -map $::env(SYNTH_LATCH_MAP) |
| simplemap |
| } |
| |
| dfflibmap -liberty $sclib |
| tee -o "$::env(yosys_report_file_tag)_dff.stat" stat |
| |
| if { [info exists ::env(SYNTH_EXPLORE)] && $::env(SYNTH_EXPLORE) } { |
| design -save myDesign |
| |
| for { set index 0 } { $index < [llength $all_scripts] } { incr index } { |
| log "\[INFO\]: ABC: WireLoad : S_$index" |
| design -load myDesign |
| |
| abc -D $clock_period \ |
| -constr "$sdc_file" \ |
| -liberty $sclib \ |
| -script [lindex $all_scripts $index] |
| |
| setundef -zero |
| |
| hilomap -hicell {*}$::env(SYNTH_TIEHI_PORT) -locell {*}$::env(SYNTH_TIELO_PORT) |
| |
| splitnets |
| opt_clean -purge |
| insbuf -buf {*}$::env(SYNTH_MIN_BUF_PORT) |
| |
| tee -o "$::env(yosys_report_file_tag)_$index$chk_ext" check |
| tee -o "$::env(yosys_report_file_tag)$index$stat_ext" stat -top $vtop -liberty [lindex $::env(LIB_SYNTH_COMPLETE_NO_PG) 0] |
| write_verilog -noattr -noexpr -nohex -nodec -defparam "$::env(yosys_result_file_tag)_$index.v" |
| design -reset |
| } |
| } else { |
| |
| log "\[INFO\]: ABC: WireLoad : S_$strategy" |
| |
| abc -D $clock_period \ |
| -constr "$sdc_file" \ |
| -liberty $sclib \ |
| -script [lindex $all_scripts $strategy] \ |
| -showtmp; |
| |
| setundef -zero |
| |
| hilomap -hicell {*}$::env(SYNTH_TIEHI_PORT) -locell {*}$::env(SYNTH_TIELO_PORT) |
| |
| # get rid of the assignments that make init_floorplan fail |
| splitnets |
| opt_clean -purge |
| insbuf -buf {*}$::env(SYNTH_MIN_BUF_PORT) |
| |
| tee -o "$::env(yosys_report_file_tag)_$strategy$chk_ext" check |
| tee -o "$::env(yosys_report_file_tag)_$strategy$stat_ext" stat -top $vtop -liberty [lindex $::env(LIB_SYNTH_COMPLETE_NO_PG) 0] |
| write_verilog -noattr -noexpr -nohex -nodec -defparam "$::env(SAVE_NETLIST)" |
| } |
| |
| if { $::env(SYNTH_NO_FLAT) } { |
| design -reset |
| read_liberty -lib -ignore_miss_dir -setattr blackbox $::env(LIB_SYNTH_COMPLETE_NO_PG) |
| file copy -force $::env(SAVE_NETLIST) $::env(yosys_tmp_file_tag)_unflat.v |
| read_verilog -sv $::env(SAVE_NETLIST) |
| synth -top $vtop -flatten |
| splitnets |
| opt_clean -purge |
| insbuf -buf {*}$::env(SYNTH_MIN_BUF_PORT) |
| write_verilog -noattr -noexpr -nohex -nodec -defparam "$::env(SAVE_NETLIST)" |
| tee -o "$::env(yosys_report_file_tag)_$strategy$chk_ext" check |
| tee -o "$::env(yosys_report_file_tag)_$strategy$stat_ext" stat -top $vtop -liberty [lindex $::env(LIB_SYNTH_COMPLETE_NO_PG) 0] |
| } |