| # SPDX-FileCopyrightText: 2021 , Dinesh Annayya |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # SPDX-License-Identifier: Apache-2.0 |
| # SPDX-FileContributor: Modified by Dinesh Annayya <dinesha@opencores.org> |
| |
| # Global |
| # ------ |
| |
| set script_dir [file dirname [file normalize [info script]]] |
| # Name |
| set ::env(DESIGN_NAME) uart_i2c_usb_spi_top |
| |
| |
| set ::env(DESIGN_IS_CORE) "0" |
| set ::env(FP_PDN_CORE_RING) "0" |
| |
| # Timing configuration |
| set ::env(CLOCK_PERIOD) "10" |
| set ::env(CLOCK_PORT) "app_clk usb_clk u_uart0_core.u_lineclk_buf.genblk1.u_mux/X u_uart1_core.u_lineclk_buf.genblk1.u_mux/X" |
| |
| set ::env(SYNTH_MAX_FANOUT) 4 |
| |
| ## CTS BUFFER |
| set ::env(CTS_CLK_BUFFER_LIST) "sky130_fd_sc_hd__clkbuf_4 sky130_fd_sc_hd__clkbuf_8" |
| set ::env(CTS_SINK_CLUSTERING_SIZE) "16" |
| set ::env(CLOCK_BUFFER_FANOUT) "8" |
| |
| # Sources |
| # ------- |
| |
| # Local sources + no2usb sources |
| set ::env(VERILOG_FILES) "\ |
| $::env(DESIGN_DIR)/../../verilog/rtl/clk_skew_adjust/src/clk_skew_adjust.gv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/uart/src/uart_core.sv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/uart/src/uart_cfg.sv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/uart/src/uart_rxfsm.sv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/uart/src/uart_txfsm.sv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/lib/async_wb.sv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/lib/async_fifo.sv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/lib/async_fifo_th.sv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/lib/reset_sync.sv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/lib/double_sync_low.v \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/lib/clk_ctl.v \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/lib/registers.v \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/i2cm/src/core/i2cm_bit_ctrl.v \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/i2cm/src/core/i2cm_byte_ctrl.v \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/i2cm/src/core/i2cm_top.v \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/usb1_host/src/core/usbh_core.sv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/usb1_host/src/core/usbh_crc16.sv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/usb1_host/src/core/usbh_crc5.sv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/usb1_host/src/core/usbh_fifo.sv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/usb1_host/src/core/usbh_sie.sv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/usb1_host/src/phy/usb_fs_phy.v \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/usb1_host/src/phy/usb_transceiver.v\ |
| $::env(DESIGN_DIR)/../../verilog/rtl/usb1_host/src/top/usb1_host.sv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/sspim/src/sspim_top.sv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/sspim/src/sspim_ctl.sv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/sspim/src/sspim_if.sv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/sspim/src/sspim_cfg.sv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/sspim/src/sspim_clkgen.sv \ |
| $::env(DESIGN_DIR)/../../verilog/rtl/uart_i2c_usb_spi/src/uart_i2c_usb_spi.sv\ |
| $::env(DESIGN_DIR)/../../verilog/rtl/lib/ctech_cells.sv \ |
| " |
| |
| set ::env(SYNTH_NO_FLAT) {1} |
| set ::env(SYNTH_READ_BLACKBOX_LIB) 1 |
| set ::env(VERILOG_INCLUDE_DIRS) [glob $::env(DESIGN_DIR)/../../verilog/rtl/i2cm/src/includes $::env(DESIGN_DIR)/../../verilog/rtl/usb1_host/src/includes ] |
| set ::env(SYNTH_DEFINES) [list SYNTHESIS ] |
| |
| set ::env(SDC_FILE) $::env(DESIGN_DIR)/base.sdc |
| set ::env(BASE_SDC_FILE) $::env(DESIGN_DIR)/base.sdc |
| |
| set ::env(LEC_ENABLE) 0 |
| |
| set ::env(VDD_PIN) [list {vccd1}] |
| set ::env(GND_PIN) [list {vssd1}] |
| |
| |
| # Floorplanning |
| # ------------- |
| |
| set ::env(FP_PIN_ORDER_CFG) $::env(DESIGN_DIR)/pin_order.cfg |
| set ::env(FP_SIZING) "absolute" |
| set ::env(DIE_AREA) [list 0.0 0.0 520.0 800.0] |
| |
| |
| |
| # If you're going to use multiple power domains, then keep this disabled. |
| set ::env(RUN_CVC) 0 |
| |
| #set ::env(PDN_CFG) $script_dir/pdn.tcl |
| |
| |
| set ::env(PL_TIME_DRIVEN) 1 |
| set ::env(PL_TARGET_DENSITY) "0.42" |
| |
| # helps in anteena fix |
| set ::env(USE_ARC_ANTENNA_CHECK) "0" |
| |
| #set ::env(FP_IO_VEXTEND) 4 |
| #set ::env(FP_IO_HEXTEND) 4 |
| |
| set ::env(FP_PDN_VPITCH) 100 |
| set ::env(FP_PDN_HPITCH) 100 |
| set ::env(FP_PDN_VWIDTH) 6.2 |
| set ::env(FP_PDN_HWIDTH) 6.2 |
| |
| #set ::env(GLB_RT_MAXLAYER) 5 |
| set ::env(RT_MAX_LAYER) {met4} |
| |
| #Lef |
| set ::env(MAGIC_GENERATE_LEF) {1} |
| set ::env(MAGIC_WRITE_FULL_LEF) {0} |
| |
| #set ::env(GLB_RT_MAX_DIODE_INS_ITERS) 10 |
| set ::env(DIODE_INSERTION_STRATEGY) 4 |
| |
| set ::env(GLB_RESIZER_TIMING_OPTIMIZATIONS) {1} |
| set ::env(PL_RESIZER_TIMING_OPTIMIZATIONS) {1} |
| |
| set ::env(CELL_PAD) {8} |
| #LVS Issue - DEF Base looks to having issue |
| set ::env(MAGIC_EXT_USE_GDS) {1} |
| |
| set ::env(GLB_RESIZER_MAX_SLEW_MARGIN) {1.5} |
| set ::env(PL_RESIZER_MAX_SLEW_MARGIN) {1.5} |
| |
| set ::env(GLB_RESIZER_MAX_CAP_MARGIN) {0.25} |
| set ::env(PL_RESIZER_MAX_CAP_MARGIN) {0.25} |
| |
| set ::env(GLB_RESIZER_MAX_WIRE_LENGTH) {500} |
| set ::env(PL_RESIZER_MAX_WIRE_LENGTH) {500} |
| |
| set ::env(QUIT_ON_TIMING_VIOLATIONS) "0" |
| set ::env(QUIT_ON_MAGIC_DRC) "1" |
| set ::env(QUIT_ON_LVS_ERROR) "1" |
| set ::env(QUIT_ON_SLEW_VIOLATIONS) "0" |